PÖTTINGER SERVO
Mounted ploughs
97+210.02.0911
Find out more online!
SERVO
Mounted ploughs – non-stop ploughing
In many cases the plough is still the piece of equipment that fits the bill. In the case of tight crop
rotation it is the plough that creates secure conditions for crop growing. Even when there is
increased pressure from pests (e.g. slugs and snails), disease (e.g. fusarium in wheat after maize)
or weeds (couch grass) the plough helps to ensure cost-effectiveness.
Some nutrients and trace elements (e.g. phosphorus and molybdenum) are not water-soluble.
For this reason it is essential that they are transported to deeper layers of soil. For these reasons
Pöttinger is working single-mindedly on developments to the plough.
2
Page
SERVO overview
4–5
SERVOMATIC control technology
6–7
SERVO plus hydraulic-furrow width adjustment
8–9
SERVO nova protection against stones
10 – 11
SERVO 25 / 35 / 35 S / 45 / 45 S
12 – 17
SERVO ploughs with backbone
18 – 19
SERVO 45 S Traction Control
20 – 21
Parts and accessories
22 – 31
Plough bodies
26 – 27
Technical data and equipment
32 – 35
3
SERVO
Traktor
kW
hp
37
50
SERVO 25
SERVO 35
SERVO 35 plus
SERVO 35 S
SERVO 35 S plus
SERVO 45
SERVO 45 plus
SERVO 45 S
59
74
81
88
96
103
110
118
125
80
100
110
120
130
140
150
160
170
2-furrow
3-furrow
4-furrow
3-furrow
4-furrow
5-furrow
3-furrow
4-furrow
4-furrow
5-furrow
6-furrow
4-furrow
5-furrow
4-furrow
5-furrow
4-furrow
5-furrow
3-furrow
4-furrow
147
200
162
220
176
240
199
270
5-furrow
6-furrow
4-furrow
SERVO 45 S plus
5-furrow
6-furrow
Mounted reversible ploughs for every tractor
SERVO 25 – 2 / 3 / 4 furrows
SERVO 35 – 3 / 4 / 5 furrows, SERV
SERVO furrows
4
O 35 S – 4 / 5 / 6 furrows
SERVO 45 – 4 / 5 furrows, SERVO 45 S – 3 / 4 / 5 / 6 furrows
SERVO plus
5
SERVOMATIC
SERVO
The only accurate control centre
Correct plough settings mean
perfect, satisfying ploughing.
With Pöttinger, the plough is
simply and easily adjusted to
tractor and soil conditions using the SERVOMATIC setting
system.
It’s unique...
„ Front furrow width and pulling point are adjusted separately with ease and precision.
The two functions do not influence each other; no need for corrective adjustment.
A few simple adjustments and the plough is set correctly the first time.
„ The wide, infinitely variable range allows rapid setting for all conditions.
„ Optimum pulling point adjustment guarantees low landside pressure, giving less wear and
low fuel consumption.
„ Turnbuckles with anti-twist locks allow easy, accurate plough setting.
This system brings particular
benefits to large farms, machinery rings and machinery
cooperatives.
6
The right setting:
� Adjust front furrow width using the rear turnbuckle
„ If the front furrow width is too narrow, extend the turnbuckle.
„ If it is too wide, shorten the turnbuckle.
햳
� Adjust the pulling point using the front turnbuckle
„ If the tractor pulls towards the ploughed field – extend
the turnbuckle – lower links move towards the
ploughed field.
SERVO plus
햲
„ If the tractor pulls towards the unploughed field –
shorten the turnbuckle – lower links move towards
the unploughed field.
„ The front furrow width does not change when
the pulling point setting is changed.
햴 햵
� Pulling point on furrow side –
landside pressure too low
„ poor tracking
� Pulling point on landside – landside pressure too high
„ high wear
7
SERVO plus
SERVO plus – intelligent
adjustment technology
Different working conditions
and soil structures require
different tractive powers.
„ The SERVO plus-system is designed to allow hydraulic furrow-width adjustment during
ploughing. The hydraulic cylinder has a check valve so that the hoses are not under pressure
during ploughing.
„ All additional adjustments adapt to it automatically.
With hydraulic SERVO plus
furrow-width adjustment the
plough is always precisely
matched to soil conditions.
Optimum tractor efficiency
and ploughing at all times.
8
„ Optimum adaptation to tractor power, hillsides and field shapes.
„ Easy ploughing of tight corners and headlands.
„ Optimum fence-line ploughing from three furrow models and above.
„ Important pivot points have wear-resistant,
replaceable spring-steel bushes for the highest
pressure demands, and the pivot points can be
lubricated.
Infinitely variable
adjustment
Furrow-width adjustment without wandering lower links –
unique
„ Fine adjustment gives unique, 100% basic adjustment to
varying tractor lower linkage dimensions which deviate
greatly from the norm – power class up to 150 HP.
„ Furrow-width adjustment is accompanied by 100%
adjustment of front furrow width and pull line. The lower
links stay parallel with no side pull – essential for a straight
furrow. Consistent landside pressure at all furrow widths.
„ Memory cylinder technology for two functions (option):
Beam pivot system and furrow-width – the plough is
pivoted and rotated, then readjusted to the preselected
furrow width.
SERVO plus adjustment system with parallel control
linkage and pivot point located outside the frame
„ Long adjusting lever means low force needed to make
adjustments.
„ Protects the parallel linkage and pivot points.
9
NONSTOP ploughing on stony soils
SERVO nova ploughs with
stone protection give maximum reassurance.
Guaranteed protection even
on stony soils.
Non-stop ploughing
10
Indirect triggering
„ This system has a very clever triggering pressure system: The leg does not trip until the set
resistance has been reached. Then the pressure required to trigger the leg reduces as the leg
rises. This protects the whole plough.
„ On re-penetrating the soil, the pressure increases – for reliable penetration on heavy, dry
soils.
Set the trigger point quickly and easily – and read it off
the pressure gauge on the headstock.
SERVO nova
Hydromechanical stone protection – so the stones don’t grow!
„ With its variable hydraulic triggering pressure, the ”nova system“ tailors the plough to
different soil types.
„ Each pair of plough bodies has its own hydraulic accumulator which allows upward or lateral
movement by up to 15.7" / 400 mm.
„ The lubricated pivot points and additional shear bolts guarantee a long service life.
„ Central adjustment is standard in all SERVO nova ploughs.
„ Smooth, flexible triggering protects both plough and tractor.
„ The gas accumulators are mounted on the inside of the plough legs for protection.
„ Spring-mounted disc coulters roll over rocks without the risk of damage.
11
SERVO 25
The stable light-weight up to 120 hp
SERVO 25 – the lighter range
for use with tractors up to
120 HP.
Headstock
„ The forged moulded headstock continues under the reversing axle, for greater stability.
„ A dual-action turn-over cylinder with check valve is standard; hoses are not under pressure
during ploughing.
„ Three top-link positions, including a slot for faster penetration and lower link sensing.
SERVO 25 – entry-level range, 2 – 4 furrows
Furrows
2 / 3 / 4 (3+1)
Plough-beam in / mm
3.94x3.94x0.39 / 100x100x10
Frame height in / mm
29.1 or 31.5 / 740 or 800
Leg in in / mm
3.15x1.18 / 80x30
Working width per body in / cm
12
Body distance 33.5" / 850 mm
13/14.1/15.7/16.9 / 33/36/40/43
Body distance 37.4" / 950 mm
13/14.6/16.1/17.7 / 33/37/41/45
Body distance 40.2" / 1020 mm
13.8/15.7/17.3/18.9 / 35/40/44/48
Mounting brackets
Reversing axle
Bolted reinforcement in main
plough beam bearing
Cross Shaft Cat. 2, optional Cat. 3
„ The continuous cross shaft can be adjusted to four positions and has an anti-twist lock.
Correct positioning on the tractor and optimum clearance at all times.
Reversing unit and reversing axle
„ The reversing axle is a full, 3.15 in / 80 mm diameter shaft.
„ The tapered roller bearings are tensioned by a castellated nut. Camber adjustment via two
turnbuckles.
Forged moulded leg mounting brackets
„ The bracket surrounds the plough beam with a large contact area to transfer forces to the
frame.
Solid body mountings on both sides
„ Double-sided shear protection via shear bolts.
„ Four furrow widths easily selected via hole matrix by moving a bolt.
Bolted reinforcement in main plough beam bearing
„ For 4-furrow option, additional frame reinforcement bolted onto the plough beam tube –
no holes or welds that might weaken the beam.
„ Plough beam made of SG 50 steel
SERVO 25 nova with hydromechanical stone protection.
13
SERVO 35 / 35 S
One range up to 140 hp and 170 hp
The tractors used on mediumsized arable farms are steadily
increasing in size so demands
on the plough are also
increasing.
Headstock
„ Double-acting turn over cylinder with check valve; hoses are not under pressure during
ploughing.
„ The continuous cross shaft can be adjusted to four positions and has an anti-twist lock.
Correct positioning on the tractor and optimum clearance at all times.
The SERVO 35 range up to
140 hp this bill.
And for tractors up to 170 hp
the SERVO 35 S range is an
ideal match.
SERVO 35 – up to 140 hp
SERVO 35 S – up to 170 hp
SERVO 45 headstock
3/4/5
4/5/6
Cat. 2 / 5-furrow Cat. 3
Cat. 2, width 2
Plough-beam inch / mm
4.72x4.72x0.39 / 120x120x10
4.72x4.72x0.39 / 120x120x10
Frame height inch / mm
31.5 / 800
31.5 / 800
3.15x1.18 / 80x30
3.15x1.18 / 80x30
Furrows
Cross shaft
Leg inch / mm
Working width per body inch / cm
14
Body distance 37.4" / 950 mm
11.8/13.8/15.7/17.7/19.7 / 30/35/40/45/50
Body distance 40.2" / 1020 mm
12.6/15/16.9/18.9/21.3 / 32/38/43/48/54
SERVO plus 37.4" / 950 mm
9.05–19.29 / 230 – 490 mm
SERVO plus 40.2" / 1020 mm
9.84 – 21.26 / 250 – 540 mm
Five furrow widths
Three top-link positions
Solid reversing axle
Leg-mounting on two sides
Three top-link positions
„ including a slot for faster penetration and lower link sensing. The extra-thick top link
retention plate is hardened and guarantees a snug fit for the top link pin.
Reversing axle and reversing unit
„ SERVO 35 reversing axle 3.94 in / 100 mm, SERVO 35 S 4.33 / 110 mm.
„ The reversing unit, made from tempered cast steel, is not welded to the reversing axle.
The hydraulic hoses pass through the hollow shaft preventing trapping of the hoses during
reversing.
„ The heavy-duty tapered roller bearings are reliably protected from dirt and locked with an
adjustable castellated nut. Camber adjustment via two turnbuckles.
Leg mounting brackets
„ The heat-treated steel leg mounting brackets are large and will resist high loads.
„ The bracket surrounds the plough beam with a large contact area for optimum transfer of
forces to the beam.
Solid leg-mounting on two sides
„ Double-sided shear protection via shear bolts.
„ Five furrow widths easily selected via hole matrix by moving a bolt.
SERVO 35 / SERVO 35 S plus with hydraulic furrow-width adjustment.
SERVO 35 / SERVO 35 S nova with hydromechanical stone protection.
15
SERVO 45 / 45 S
The robust range up to 170 hp
and the top range up to 270 hp
Furrows
Cross shaft
SERVO 45 – up to 170 hp
SERVO 45 S – up to 270 hp
3/4/5
4/5/6
Cat. 3, width 2
Cat. 3, width 3
Plough-beam in / mm
5.51x5.51x0.39 / 140x140x10
5.51x5.51x0.39 / 140x140x10
Frame height in / mm
31.5 / 35.4 / 800 / 900
31.5 / 35.4 / 800 / 900
3.15x1.18 / 80x30
3.15x1.18 / 80x30
Leg in in / mm
Working width per body in / cm
Body distance 37.4" / 950 mm
11.8/13.8/15.7/17.7/19.7 / 30/35/40/45/50
11.8/13.8/15.7/17.7/19.7 / 30/35/40/45/50
Body distance 40.2" / 1020 mm
12.6/15/16.9/18.9/21.3 / 32/38/43/48/54
12.6/15/16.9/18.9/21.3 / 32/38/43/48/54
SERVO plus 37.4" / 950 mm
9.05 – 19.29 / 230 – 490 mm
9.05 – 19.29 / 230 – 490 mm
SERVO plus 40.2" / 1020 mm
9.84 – 21.26 / 250 – 540 mm
9.84 – 21.26 / 250 – 540 mm
16
Linkage double gear Cat. 3
Headstock SERVO 45 S
Increasingly powerful tractors
carry ploughs with up to six
furrows on the three-point
linkage.
Fast road travel and large
body distances demand a
robust headstock, a strong
reversing mechanism and
plough-beam.
„ Headstock: Double-acting reversing cylinder with check valve; hoses are not under pressure
during ploughing.
„ The continuous lower link bar can be adjusted to four positions and has an anti-twist lock.
Correct positioning on the tractor and optimum clearance at all times. Linkage double gear
Cat. III on option for SERVO 45 S, standard on SERVO 45 S with 6 furrows.
Reversing axle SERVO 45 Ø 4.33 in / 110 mm, SERVO 45 S Ø 5.91 / 150 mm
„ The reversing unit made from tempered cast steel, is not welded to the reversing axle.
The hoses pass through the headstock giving optimum protection. Hoses are protected
from being trapped during reversing. The heavy-duty tapered roller bearings are reliably
protected from dirt and locked with an adjustable castellated nut. Camber adjustment
via two turnbuckles.
„ Three top-link positions, including a slot for faster penetration and lower link sensing.
The extra-thick top-link retention plate guarantees a snug fit for the top link pin.
„ The heat-treated steel leg-mounting brackets are large and will resist high loads.
„ The bracket surrounds the plough beam with a large contact area for optimum transfer of
forces to the beam.
„ Solid leg mountings on both sides, double-sided shear protection via shear bolts.
5 furrow widths easily selected via hole matrix by moving a bolt.
„ SERVO 45 / 45 S plus with hydraulic furrow-width adjustment.
„ SERVO 45 / 45 S nova with hydromechanical stone protection.
17
SERVO 35 / 35 S / 45 / 45 S
m
00 m
44.6
/
.6 in
22
m–
0m
133
– 86
Ploughs with backbone
Unique amongst all ploughs:
Bolted reinforcements where the load
on the beam is greatest
In the SERVO Series 35
and 45, the inside of the
continuous plough beam,
made from micro-alloyed
fine-grain steel, is additionally
strengthened by two bolted
reinforcements.
The thick walls of the plough
beam guarantee a robust seat
for plough leg mountings and
attachments.
18
„ The large main frame reinforcements with 44.6 – 86.6 in / 1.33 – 2.20 m seat length
(S version) gives the best distribution of forces up to well beyond the second body.
„ Intelligent solution: Maximum plough-beam rigidity at the point of maximum bending.
The inner web increases resistance to flexing by up to 25%.
„ The firm seating of the high-specification individual bolts gives a robust, highly stable unit.
No through bolts that could work loose.
Bolted reinforcements where the
load on the beam is greatest
Headstock SERVO 35 S / SERVO 45
Plough-beam pivot system
„ At large furrow-widths and body distances, and when clearance is too low, the beam is
hydraulically pivoted on reversing but furrow width adjustment remains unchanged.
„ The plough is narrow for road transport and parking.
„ The hydraulic cylinder has a check valve so that the hoses are not under pressure during
ploughing.
The beam link – a central component
„ The conical shape of the beam link with wide-spaced mounting on the reversing unit means
that high load torques can be absorbed.
„ The pins in the lubricated pivot points have anti-twist locks. Replaceable bushes in the
reversing unit and pivot points guarantee a long service life.
Beam link
Plough-beam pivot system
19
SERVO Traction
Control
Improved traction in the SERVO 45 S
With the optional traction
control module the weight
of the SERVO 45 S mounted
plough is transferred from the
plough to the tractor.
Wheel slip can be reduced by a perfect match between power requirement and rear axle load.
This saves fuel and conserves the soil.
„ Permanent loading of the rear wheels
„ Reduced slip
„ Prevents damaging compaction
Force transmission via the
traction system means that
the load is always on the rear
wheels when the plough’s
ground hugging system is
optimally adjusted.
20
„ Saves fuel
„ Improves the environment and energy situation
Assessment of the influence of Traction Control on tractor fuel consumption and wheel slip
University of Natural Resources and Applied Life Sciences, Vienna
Slip and the damaging
compaction caused by the
rear wheels are therefore
reduced. This ensures
optimum tractor efficiency.
The trigger pressure can be
adjusted from the tractor. The
pressure remains the same,
even at the headland.
Performance and consumption data for medium-heavy soil
working width 8.53 ft / 2.60 m, working depth 9.84 in / 250 mm
Driving strategy
without Traction Control
Traction Control
Efficiency
Performance
1.94 ha/h
2.07 ha/h
+ 0.13 ha/h
Diesel consumption
20.5 l/ha
18.4 l/ha
- 2.1 l/ha
Diesel consumption
39.7 l/h
38.0 l/h
- 1.7 l/h l/h
Wheel slip
4.8 %
3.3 %
- 1.5 %
Markus Schüller, Gerhard Moitzi, Division of Agricultural Engineering
Helmut Wagentristl, Experimental Farm Grossenzersdorf
21
SERVO
New SERVO special equipment
for difficult soils and requirements
A large selection of modern
body shapes to suit every soil
type. A new addition to the
range is the plastic plough
body 50 RW for soils with
little structure and a high
proportion of organic matter,
such as marsh land and peat.
The Robalon-S mouldboard
has been specially developed
for difficult soil conditions.
The skimmer is also made of
the same material.
22
Plastic plough body 50 RW
Furrow widener for wide tyres
Q
Q
Q
Q
Q
„ Available for all plough models and
body shapes.
Dimensions, shape equal to 46 W body
Support strip strut (to protect the plastic body)
Material: Robalon-S, 15 mm thick
Steel shares
V4 R skimmer from the same material
„ Not available in combination with disc
coulter.
Ploughing with a furrow packer
for SERVO 25 to 45 S
When ploughing with a furrow
packer the furrows created by
the plough are consolidated
straight away. On lighter
soils the result is a firm, level
seedbed, allowing cultivation
passes to be reduced.
„ The press is collected by the press arm’s large jaw. It is hydraulically released before
raising the plough.
„ A five-position mounting means the press can be set for different working widths.
A tension spring pivots the press arm into the set catching position after releasing.
„ In SERVO plus ploughs, the catching position is maintained precisely by a chain even
when adjusting furrow width.
„ The press arm can be fixed within the tractor width for road transport.
„ The entire press arm can be removed quickly and easily.
23
SERVO
Angle adjustment
Shin
Landside knife coulter
Large landside
Frog
The body – a safe combination
Long service life of wearing
parts is of utmost importance
for more cost-effective tillage
implements.
Pöttinger has driven
developments in this area with
its new durability technology.
Frog
„ The frog is hardened, giving maximum strength and reliability for both mouldboards and slats.
„ The single-piece shares sit on a forged raised part to give a precise, durable joint.
Angle adjustment
„ An eccentric allows adjustment of body angle. For reliable penetration, even on extremely
hard, dry soils.
Large landsides for reliable plough tracking
„ The landsides can be used four times to ensure cost efficient use of the parts.
Single-piece reversible points
„ Single-piece points are reversible for reduced operating costs.
„ The single-piece points are manufactured from hardened boron steel and guarantee good
plough penetration in all soil conditions. Optional single-piece points with additional hard
faced welding for extreme wear-resistance.
24
Trashboards
Reversible point
Share
Shares
„ All shares are manufactured from hardened boron steel. Increasing the hardened wear zone
extends service life by up to 50%. The 0.433" / 11 mm-thick shares have a total width of
5.90" / 150 mm.
„ The forward taper aids good penetration and has the effect of being self-sharpening.
Shins
„ made from 0.32" / 8 mm hardened fine-grain steel are used on mouldboards in the area of
greatest wear. They are quick and easy to replace.
One-piece share
One-piece share with robust points. A large angle
guarantees good penetration. Highly suitable for
stony soils and shallow ploughing.
Blade share
Welded cutting blades on the shares give better
crumbling as they split the furrow down the
middle.
25
Bodies for all soils
Different soil types and
working conditions need
different body shapes.
They must be low-drag and
give optimum performance.
Ideal body shapes
„ A large selection of modern body shapes to suit every soil type.
„ SERVO bodies meet all the requirements, and years of experience and practical tests testify
to the reliability and stability of the material.
Mouldboards
„ 8 mm hardened fine-grain steel – extremely resistant to wear
Slatted boards
„ Slats 10 mm thick and hardened throughout – extremely resistant to wear. Slats bevelled and
angled backwards – prevent jammed stones.
Long, twisted mouldboards
27 W
Low-drag bodies, highly
suited to slopes. Ideal for
ploughing up pasture and
topsoil ploughing, wide
furrow clearance. Suitable
for higher forward speeds.
41 W
Long, curved mould board
for heavy, sticky soil.
Moderate working speed.
Working width to
17.2 in / 450 mm
Working depth to
11.81 in / 300 mm
Working width to
17.2 in / 450 mm
Furrow clearance up to
17.2 in / 450 mm
Working depth to
9.84 in / 250 mm
Furrow clearance up to
18.90 in / 480 mm
36 W
Long, curved mould board
for heavy, sticky soil.
Moderate working speed.
Working width to
17.2 in / 450 mm
Working depth to
9.84 in / 250 mm
Furrow clearance up to
15.75 in / 400 mm
46 W
Good crumbling effect and
suitable for slopes, low drag
resistance in loam and clay
soils, also light soil types. A
plough body for high working
speeds without overlapping.
Wide furrow clearance and
low drag resistance are the
hallmarks of this body.
Working width to
21.26 in / 540 mm
Working depth to
13.78 in / 350 mm
Furrow clearance up to
20.87 in / 530 mm
26
Universal bodies
36 UW
Universal body with very
good furrow clearance
and excellent crumbling at
normal working speed. Large
quantities of harvest trash are
ploughed in tidily. A low drag
resistance body suitable for
most soils.
39 UW
Universal body with very
good furrow clearance
and excellent crumbling at
normal working speed. Large
quantities of harvest trash are
ploughed in tidily. A low drag
resistance body suitable for
most soils.
Working width to
19.68 in / 500 mm
Working depth to
11.81 in / 300 mm
Working width to
21.26 in / 540 mm
Furrow clearance up to
18.90 in / 480 mm
Working depth to
13.78 in / 350 mm
Furrow clearance up to
19.68 in / 500 mm
Slatted bodies
38 WWS
Low-drag resistance body
with curved slats for excellent
crumbling effect in medium
to heavy soils (loam, clay).
Especially wide furrow
clearing – ideal for wide tyres.
Working width to
21.26 in / 540 mm
Working depth to
11.81 in / 300 mm
Furrow clearance up to
19.68 in / 500 mm
35 WSS
Slatted body with strong
turning characteristics,
specially suitable for peaty,
medium-density and sticky
soil. Especially wide furrow
clearing and excellent
crumbling.
Working width to
21.26 in / 540 mm
Working depth to
13.78 in / 350 mm
Furrow clearance up to
20.87 in / 530 mm
Synthetic body
50 RW
Long, curved, high synthetic
body for soils with low
stability. Wide furrow
clearance. Earth flows past
easily – for use with share
points only. Not suitable for
stony ground.
Working width to
21.26 in / 540 mm
Working depth to
13.78 in / 350 mm
Furrow clearance up to
20.87 in / 530 mm
27
SERVO
Disc coulters, smooth or scalloped
Spring-mounted disc coulter
V1 Universal skimmer
V2 Maize skimmer
Landside knife coulter
A clean surface and furrow
Disc coulters and skimmers
A clean disc-coulter cut
guarantees precise turning of
the furrow and a clean furrow
wall. Important when using
wide tractor tyres.
Suitable skimmer shapes
mean there are no crop
residues on the surface after
ploughing.
Disc coulters, smooth or scalloped
„ A mounting bracket for standard and SERVO plus ploughs with depth adjustment via toothed
segments.
„ Bracket moved forward – disc coulter in front of skimmer, large clearance – no blocking with
large amounts of maize straw.
„ Bracket moved backwards – disc coulter close to skimmer for light, free-flowing soils and
shallow ploughing.
Smooth disc coulters
„ Diameter 19.68 or 23.23 in / 500 or 590 mm with good self-cleaning characteristics.
„ Star-shaped indentations keep disc coulters turning.
Scalloped disc coulters
„ Diameter 9.68 or 23.23 in / 500 or 590 mm – good turning characteristics in high levels of
organic matter.
Spring-mounted disc coulter
„ Smooth or scalloped for ploughs with trip leg system.
Landside knife coulter
„ Landside knife coulter – a low-cost alternative – from 8.66 in / 220 mm working depth.
28
V3 Universal skimmer
V4 RW
Skimmers
„ Same shank for all skimmers with multi-stage depth adjustment – without tools.
„ Distance from the plough body is adjustable via the hole matrix.
„ Skimmers are secured by shear bolts.
Types of skimmers
„ V1 standard skimmer for all incorporation tasks and for maize straw.
„ V2 Maize skimmer for large amounts of organic matter and for larger working depths.
„ V3 Universal skimmer suitable for all incorporation tasks.
Trashboards – alternatives for
shallow ploughing and stony
soils.
Leg protectors – improves ploughing
in large amounts of organic matter
and protects the leg.
29
Depth wheels for good tracking
Precise depth control of the
plough is important. Quick,
easy adjustment is essential.
Depending on options and
plough type, Pöttinger offers
both dual depth wheels and
self-aligning wheels.
Dual depth wheels
Dual-depth wheel – steel or pneumatic
Dual-depth wheel – with
hydraulic depth adjustment
Dual-depth wheel – steel, 19.88 x 7.28 in / 505 x185 mm
Dual depth wheel pneumatic, 22.8 x 10.4 in / 579 x 264 mm
Dual depth wheels pneumatic, 26/12-12; 660 x 305 mm
SERVO 25 to 45 S
Wheel mounted at second last and last body on ploughs with 4 or more shares. The mounting can
be secured towards rear, or towards front for fenceline ploughing. The wheels can be adjusted
steplessly and individually using turnbuckles.
Dual depth wheel pneumatic, with hydraulic depth adjustment, 22.8 x 10.4 in / 579 x 264 mm
Dual depth wheel pneumatic, with hydraulic depth adjustment, 26/12-12; 660 x 305 mm
SERVO 25 to 45 S
Wheel can be mounted at second last or last body on ploughs with 4 or more shares.
Infinitely-variable hydraulic depth adjustment – one doubleacting connection required.
30
Self-aligning
wheels
Self-aligning wheels, hydraulically-damped
Self-aligning wheels, non-damped
Self-aligning wheel – steel, non-damped, 19.88 x 7.28 in / 505 x185 mm
Self-aligning wheel pneumatic, non-damped, 22.8 x 10.4 in / 579 x 264 mm
SERVO 25 to 35 S
The depth wheel pivots over when the plough is turned over. A Pin positions the depth wheel
correctly during penetration. Depth is adjusted by spindle. Wheel mounted at second last and last
body on ploughs with 4 or more shares.
Self-aligning wheel – steel, hydraulically-damped, 19.88 x 7.28 in / 505 x185 mm
SERVO 25 to 35 S
When the plough turns over the wheel pivot is damped hydraulically – jolt-free pivoting ensures
smooth operation and a longer service life. Wheel is located at last body.
Self-aligning wheel pneumatic, hydraulically-damped, 22.8 x 10.4 in / 579 x 264 mm
Can also be used for transport; wheel is located at last body.
SERVO 25 – without transport interlock
SERVO 35 to 45 S – with transport interlock
Transport / reversing wheels
VTPR
TPR
TPR – transport / reversing wheels pneumatic, 579 x 264 mm, 755 x 270 mm, 780 x 340 mm
SERVO 35 to 45 S
Best guidance for plough in the field and optimum driving performance on the road. Transport
position reached by pivoting the wheel and inserting pin. Transport function can also be retrofitted.
VTPR – forward-mounted transport / depth wheels pneumatic – ideal for fenceline ploughing
From 5 furrows 29.72 x 10.63 in / 755 x 270 mm or 30.71 x 13.38 in / 780 x 340 mm
SERVO 35 to 45 S
The reversing wheel is hydraulically dampened so it pivots without jolting. The wheel can be
converted to the transport function in just a few steps.
VTPR – forward-mounted transport / depth wheels pneumatic with hydraulic depth
adjustment
Infinitely-variable hydraulic depth adjustment – one doubleacting connection required.
31
Technical data
Furrows
Body distance in / mm
Plough beam
Basic weight
lbs / kg
740 / 800 mm
3.94 x 3.94 in
100 x 100 mm
1253 / 795
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
2456 / 1114
Frame height
SERVO standard ploughs with stepped furrow widths – manual adjustment
SERVO 25
2
37.4 / 950 40.2 / 1020
3
33.5 / 850 37.4 / 950 40.2 / 1020
3+1
33.5 / 850 37.4 / 950 40.2 / 1020
37.4 / 950 40.2 / 1020
3
SERVO 35
3+1
4
37.4 / 950 40.2 / 1020
40.2 / 1020
4+1
37.4 / 950 40.2 / 1020
4
SERVO 35 S
4+1
5
4.72 x 4.72 in
120 x 120 mm
37.4 / 950 40.2 / 1020
31.5 / 35.4 in
80 / 900 mm
5.51 x 5.51 in
140 x 140 mm
37.4 / 950 40.2 / 1020
31.5 / 35.4 in
80 / 900 mm
5.51 x 5.51 in
140 x 140 mm
37.4 / 950
4
SERVO 45
31.5 in
800 mm
37.4 / 950 40.2 / 1020
5+1
4+1
4
SERVO 45 S
4+1
5
29.1 / 31.5 in
5+1
1351 / 613
2174 / 986
1984 / 900
2736 / 1241
2776 / 1259
3056 / 1386
3668 / 1664
2637 / 1196
3294 / 1494
2895 / 1313
3558 / 1614
4222 / 1915
SERVO ploughs with hydraulic stone protection
37.4 / 950 40.2 / 1020
2
29.1 / 31.5 in 4.72 x 4.72 x 0.39 in
33.5 / 850 37.4 / 950 40.2 / 1020
120 x 120 mm
74 / 800 mm
33.5 / 850 37.4 / 950
3
SERVO 25 nova
3+1
SERVO 35 nova
SERVO 35 S nova
37.4 / 950 40.2 / 1020
33.5 / 850 37.4 / 950 40.2 / 1020
4
33.5 / 850 37.4 / 950 40.2 / 1020
4+1
33.5 / 850 37.4 / 950
37.4 / 950 40.2 / 1020
4
SERVO 45 nova
SERVO 45 S nova
3
4
4+1
37.4 / 950
4
4+1
5
37.4 / 950 40.2 / 1020
1693 / 768
2240 / 1016
2555 / 1159
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
2273 / 1031
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
3181 / 1443
31.5 in
800 mm
5.51 x 5.51 in
140 x 140 mm
3014 / 1367
31.5 in
800 mm
5.51 x 5.51 in
140 x 140 mm
3280 / 1488
2840 / 1288
3536 / 1604
3774 / 1712
4039 / 1832
SERVO ploughs with infinitely variable hydraulic furrow-width adjustment
SERVO 35 plus
3
3+1
4
4
SERVO 35 S plus
4+1
SERVO 45 plus
3
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
2246 / 1019
37.4 / 950 40.2 / 1020
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
2919 / 1324
37.4 / 950 40.2 / 1020 45.3 / 1150
4
4+1
SERVO 45 S plus
37.4 / 950 40.2 / 1020
31.5 / 35.4 in
37.4 / 950 40.2 / 1020 80 / 900 mm
5.51 x 5.51 in
140 x 140 mm
31.5 / 35.4 in
80 / 900 mm
5.51 x 5.51 in
140 x 140 mm
4
4+1
5
37.4 / 950 40.2 / 1020
5+1
2630 / 1193
3481 / 1579
2374 / 1077
2972 / 1348
3549 / 1610
3611 / 1638
4255 / 1930
4464 / 2025
SERVO ploughs with hydraulic furrow-width adjustment and hydraulic stone protection
SERVO 35
plus nova
SERVO 35 S
plus nova
SERVO 45 S
plus nova
2533 / 1149
31.5 in
800 mm
4.72 x 4.72 in
120 x 120 mm
3507 / 1591
37.4 / 950
31.5 in
800 mm
5.51 x 5.51 in
140 x 140 mm
3358 / 1523
37.4 / 950 40.2 / 1020
31.5 in
800 mm
5.51 x 5.51 in
140 x 140 mm
3997 / 1813
4
37.4 / 950 40.2 / 1020
37.4 / 950
4
4+1
4
4+1
4.72 x 4.72 in
120 x 120 mm
37.4 / 950 40.2 / 1020
34.6 / 880 37.4 / 950 40.2 / 1020
4+1
SERVO 45
plus nova
31.5 in
800 mm
3
4
5
3188 / 1446
4019 / 1823
4030 / 1828
4672 / 2119
All information is provided without obligation.
32
SERVO support wheels
25
35
35 S
45
45 S
Weight
Dual depth wheel steel
505 x 185 mm
194 lbs / 88 kg
Dual depth wheel pneumatic
579 x 264 mm
198 lbs / 90 kg
Dual depth wheel pneumatic
579 x 264 mm, variable hydraulic depth adjustment
242 lbs / 110 kg
Dual depth wheel pneumatic
26/12-12; 660 x 305 mm
216 lbs / 98 kg
Dual depth wheel pneumatic
26/12-12,variable hydraulic depth adjustment
260 lbs / 118 kg
Self-aligning wheel steel
505 x 185 mm
121 lbs / 55 kg
Self-aligning wheel steel
505 x 185 mm; hydraulically-damped
265 lbs / 120 kg
Self-aligning wheel pneumatic
579 x 264 mm
137 lbs / 62 kg
Self-aligning wheel pneumatic
579 x 264 mm; hydraulically-damped
276 lbs / 125 kg
Self-aligning wheel pneumatic
26/12-12; 660 x 305 mm
143 lbs / 65 kg
Depth wheel and transport wheel
579 x 264 mm; hydraulically-damped
287 lbs / 130 kg
Depth wheel and transport wheel
755 x 270 mm
397 lbs / 180 kg
Depth wheel and transport wheel
755 x 270 mm; variable hydraulic depth adjustment
430 lbs / 195 kg
Depth wheel and transport wheel, forward-mounted
780 x 340 mm
448 lbs / 203 kg
Depth wheel and transport wheel, forward-mounted
780 x 340 mm; variable hydraulic depth adjustment
481 lbs / 218 kg
= Option
All information is provided without obligation. Fittings can vary from country to country.
33
Equipments
Cross shaft Cat. 2
Cross shaft Cat. 3
Weight
Quick attach linkage
Steering cross
shaft Cat. 2
57 lbs /26 kg
183 lbs /83 kg
–
–
SERVO 25
SERVO 35
–
SERVO 35 S
–
SERVO 45
–
SERVO 45 S
–
Weight
Skimmer V1
Skimmer V2
Skimmer V3
Skimmer V4 RW
Pair 55 lbs / 25 kg
Pair 62 lbs / 28 kg
Pair 57 lbs / 26 kg
Pair 48 lbs / 22 kg
Hardened chisel point
Plain share hard metal
Blade share
Subsoiler
SERVO 25
SERVO 35
SERVO 35 S
SERVO 45
SERVO 45 S
Weight
Pair 70 lbs / 32 kg
SERVO 25
SERVO 35
SERVO 35 S
SERVO 45
SERVO 45 S
= Standard;
34
= Option
Linkage double
gear Cat. 3
Traction Control
–
–
–
–
–
–
–
–
Disc coulter smooth
500 mm / 590 mm
Disc coulter scalloped
500 mm / 590 mm
Pair 165 / 190 lbs / 75 / 86 kg Pair 163 / 187 lbs / 74 / 85 kg
Plough-beam
pivot system
SERVO plus
Memoryzylinder
Furrow packer extension
arm hydraulic
99 lbs /45 kg
20 lbs /9 kg
209 lbs /95 kg
–
–
Disc coulter springmounted 500 mm
Landside knife coulter
198 / 196 lbs / 90 / 89 kg
Pair 13 lbs / 6 kg
Landside heels
on all bodies
nova
nova
nova
nova
nova
Trashboards
Furrow edge breakter
Warning signs and
road lighting
Pair 19.8 lbs / 9 kg
Pair 19.8 lbs / 9 kg
44 lbs / 20 kg
All information is provided without obligation. Fittings can vary from country to country.
35
Supreme service
You can rely on us.
Wherever they are in the world, our customers can rely on a fully developed network of sales and
service partners. This close proximity to the customer guarantees fast delivery of spare parts and also
ensures professional machine set-up and handover by qualified specialists. We are on hand wherever
you happen to be.
Our range of professional services:
„
„
„
„
Original Inside parts. 24-hour ordering service online.
Long-term stock of spare parts.
Expertise through regular training – For professional personnel.
and much more…
… find out more from your Pöttinger partner, or visit www.poettinger.at!
Pottinger Ireland Ltd.
Cashel Road, Clonmel
Co. Tipperary
Phone: +353 (0)52 61 25766
E-mail: info.ie@poettinger.at
Alois Pöttinger
Maschinenfabrik GmbH
Industriegelände 1
A-4710 Grieskirchen
Phone: +43 (0) 7248/600-0
E-mail: landtechnik@poettinger.at
www.poettinger.at
Alois Pottinger UK Ltd
St Marks Road, Corby
Northamptonshire NN18 8AN
Phone: +44 (0) 844 561 0644
E-mail: info.uk@pottingeruk.co.uk
www.pottingeruk.co.uk
Poettinger Canada Inc.
650, Route 112
St-Cesaire, PQ J0L 1T0
Phone: (450) 469-5594
E-Mail: sales.canada@poettinger.ca
www.poettinger.ca
Poettinger US Inc.
393 Pilot Drive
Valparaiso, IN 46383
Phone: (219) 510-5534
E-mail: sales.us@poettinger.us
www.poettinger.us
Importer for New Zealand:
Origin Agroup
PO Box 673, 57 Hautapu Road
Cambridge – New Zealand
Phone: +64 7 823 7582
E-mail: info@originagroup.co.nz
www.originagroup.co.nz
Importer for South Africa:
Valtrac Parys (Pty) Ltd.
Cnr. Water & Buiten Street
9585 Parys
Phone: +27 (0) 56 817 7338 / 7308
E-mail: sales@valtrac.co.za
www.valtrac.co.za
SERVO/en 0613
www.poettinger.at
Poettinger Australia P/L
15 Fordson Road
Campbellfield, VIC 3061
Phone: +61 3 9359 2969
E-mail: sales.au@poettinger.com.au
www.poettinger.com.au
Download PDF