INDUSTRIal Microscopes - Van Loenen Instruments

OPTIKA
®
I
T
INDUSTRial
A
L
Y
Microscopes
ENG
Page 152
OPTIKA
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
INDUSTRIAL microscopes
LAB SERIES - Entry-level professional stereomicroscopes
page 155
SZM SERIES - Professional stereozoom microscopes
page 159
SZN SERIES - Laboratory stereozoom microscopes
page 163
MODULAR SERIES - Modular stereozoom microscopes for industry
page 171
SZM-SMD - Stereozoom microscope for SMD inspection
page 181
ACCESSORIES - Illumination and sample positioning
page 185
OPTIGEM SERIES - Gemological stereomicroscopes
page 191
INDUSTRY SERIES - Metallurgical and measuring microscopes
page 199
Page 153
1
2
3
16
18
20
22
24
360°
Page 154
Icons
Monocular
400x Magnification 400X
x-LED2
Binocular
1000x Magnification 1000X
x-LED3
Trinocular
Incident light
Field number 16
Transmitted light
Field number 18
Polarized light
Field number 20
Halogen lamp
Field number 22
Incandescent lamp
Field number 24
Dichroic lamp
Rotating head 360°
USB USB connection
x-LED8
1WLED
LED
A
IOS
X-LED2 illuminator
X-LED3 illuminator
X-LED8 illuminator
1W LED illuminator
LED illuminator
Automatic light control
Infinity-corrected optics
Rechargeable battery
Anti-fungus treatment
OPTIKA
Professional entry-level stereomicroscopes
LAB
LAB-10 / LAB-20
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
LAB Series
Professional entry-level stereomicroscopes
Page 155
LAB Series
The LAB series can be considered as the entry-level of the OPTIKA professional stereomicroscopes range.
The two models have been designed for end users who need professional quality at low cost.
LAB-10
Stereomicroscope 20x-40x, LED incident & transmitted illumination.
LAB-20
Stereozoom microscope 7x...45x, LED incident & transmitted illumination.
LAB-10
2
360°
Page 156
20
LED
LAB Series
LAB-20
360°
LED
Heads
Binocular heads, 360° rotating and 45° inclined.
Interpupillary distance
Adjustable between 51 and 75 mm.
Eyepieces
WF10x/20 mm.
LAB-10: Dioptric compensation adjustable on left eyepiece tubes.
LAB-20: Dioptric compensation adjustable on both eyepiece tubes.
Specimen stage
Fitted with a semi-transparent disc for transmitted light with
specimen clips.
Objectives
LAB-10: with double magnification (2x-4x) that can be
selected by rotating the lens unit. Working distance 80mm.
LAB-20: continuous zoom 0,7x ...4,5x. (6,43:1 zoom factor).
Working distance: 85 mm.
Stand
Fixed arm type with focusing mechanism.
Focusing
Rack and pinion controlled by a pair of knobs placed on
both sides of the stand.
Illumination
Double adjustable illuminator for incident and transmitted light fitted with two high-efficiency LED light sources.
The angle of the incident illuminator is adjustable. Voltage:
110/240V ac.
LAB Series - Technical specifications
Model
Head
Eyepiece
Objectives
LAB-10
Binocular
WF 10x/20mm
LAB-20
Binocular
WF 10x/20mm
0,7x....4,5x zoom
Working
Distance
Stand
Illuminator
2x - 4x selectable 80 mm
by rotating
Pillar stand with
fixed holder
Double incident and transmitted light.
High-efficiency LED light sources with separate
brightness controls
85 mm
Pillar stand with
fixed holder
Double incident and transmitted light.
High-efficiency LED light sources with separate
brightness controls
Page 157
LAB Series - Accessories
LAB
ST-001.1
ST-401
ST-402
ST-403
ST-405
ST-085
ST-086
ST-415
ST-029
ST-092
ST-417
M-114
M-116
M-173
M-113.1
Eyepieces (pair) WF5x/22mm (for LAB series only).
Eyepieces (pair) WF10x/20 mm.
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20mm.
Additional lens 0,5x (w.d. 165mm).
Additional lens 1,5x (w.d. 47mm).
Eyecups (pair).
Dust cover type 12.
Protective glass for stereohead.
Round plastic stage for LAB 10 and LAB 20.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
Ring adapter, 30mm (for monocular and binocular microscopes).
* Only for LAB-20
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
LAB-10
Page 158
LAB-20
15104 - Lens cleaner, 50ml
It cleans glass quickly and effectively,
without leaving residue or odor.
Ideal for precision lens or prism cleaning.
OPTIKA
Professional stereozoom microscopes
SZM
SZM-1 / SZM-LED1 / SZM-2 / SZM-LED2 / SZM-3 / SZM-4
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
SZM Series
Professional stereozoom microscopes
Page 159
SZM Series
The stereomicroscopes of the SZM series are instruments designed for laboratory and industry applications.
Their optical and mechanical qualities place them at the top of their category and their price/quality ratio is excellent. The stereomicroscopes share the
same optical system consisting of binocular and trinocular heads with zoom objectives.
The six models of the SZM series find their proper application wherever professional instruments are required. Several accessories provide a wide choice
of configurations and applications.
SZM-1
Binocular stereozoom microscope 7x…45x, halogen incident & transmitted illumination.
SZM-LED1
Binocular stereozoom microscope 7x…45x, LED incident & transmitted light.
SZM-2
Trinocular stereozoom microscope 7x…45x, halogen incident & transmitted illumination.
SZM-LED2
Trinocular stereozoom microscope 7x…45x, LED incident & transmitted light.
SZM-3 Binocular stereozoom microscope 7x…45x, overhanging stand.
SZM-4
Trinocular stereozoom microscope 7x…45x, overhanging stand.
X-LED
X-LED powered illumination system.
SZM-LED2
3
360°
Page 160
20
LED
SZM Series
Heads
Binocular and trinocular, 360° rotating and 45° inclined.
Interpupillary distance
Adjustable between 51 and 75 mm.
Dioptric compensation
On both eyepiece tubes.
Eyepieces
EWF10x/20 mm
Objectives
Parfocal achromatic zoom 0,7x...4,5x (6,428:1 zoom factor).
Specimen stage:
Fitted with a black/white disc, specimen clips and a frosted disc
for transmitted light.
Focusing
Rack and pinion mechanism controlled by a pair of knobs
placed on both sides of the stand.
Stand
Models SZM 1/2: Pillar stand 30 mm diameter and 25 cm high,
base: 26x20x6h cm.
Models SZM-LED 1/2: Pillar stand 32 mm diameter and 315
mm high, base 27x21x3h cm.
Models SZM 3/4: Overhanging stand 42 cm high, 45 cm
horizontal arm length, base 23x23cm.
Illumination
Models SZM-1/2: Double, adjustable incident and transmitted
light, fitted with two 12V/15W halogen bulbs. The angle of the
incident illumination is adjustable.
The two models SZM-LED1/2 are equipped with a double
high-power LED.
SZM-3
360°
20
2
SZM Series - Technical specifications
Model
Head
Eyepiece
Objectives
Working Distance
Stand
Illuminator
SZM-1
Binocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Pillar stand
Incident and transmitted 12V/15W halogen
SZM-LED1
Binocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Pillar stand
Incident: high power single X-LED
Transmitted: LED diffusing disc
SZM-2
Trinocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Pillar stand
Incident and transmitted 12V/15W halogen
SZM-LED2
Trinocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Pillar stand
Incident: high power single X-LED
Transmitted: LED diffusing disc
SZM-3
Binocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Overhanging
stand
Without illuminator
SZM-4
Trinocular
WF 10x/20mm
0,7x....4,5x zoom
100 mm
Overhanging
stand
Without illuminator
Page 161
SZM Series - Accessories
SZM
ST-081
ST-082
ST-083
ST-084
ST-085
ST-091
ST-086
ST-087
ST-088.SZM ST-088.SZMLED
ST-040.SZM ST-040.SZMLED
ST-100.SZM ST-100.SZMLED
ST-666.SZM
ST-666.SZMLED
ST-110.SZM ST-110.SZMLED
ST-111.SZM ST-111.SZMLED
ST-041
ST-089
ST-090
ST-090.1
ST-036
ST-012
ST-014
ST-038
ST-037
ST-033
M-114
M-116
M-173
M-113.1
Eyepieces (pair) WF10x/20 mm.
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20 mm.
Additional lens 0,5x (w.d. 165mm).
Additional lens 0,75x (w.d. 117mm).
Additional lens 1,5x (w.d. 47mm).
Additional lens 2x (w.d. 26mm).
Polarising set (filters and rotating stage) for SZM.
Polarising set (filters and rotating stage) for SZM LED.
Darkfield condenser SZM.
Darkfield condenser SZM-LED.
Hand moving stage SZM.
Hand moving stage SZM-LED.
Heating stage for stereomicroscopes SZM.
Heating stage for stereomicroscopes SZM LED.
Moving stage, with coaxial knobs SZM.
Moving stage, with coaxial knobs SZM-LED.
Moving stage, with micrometric screws SZM.
Moving stage, with micrometric screws SZM-LED.
Sample clip.
Reflex camera adapter for FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Eyecups (pair) type 2.
White/black object-plate, type 2 dia. 95 mm. *
Glass stage, type 2, dia. 95 mm. *
Halogen bulb, 12V/15W.
Halogen bulb, 12V/15W, with dichroic mirror.
Dust cover type 13.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
Ring adapter, 30mm (for monocular and binocular microscopes).
* For LED version special adapter required
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page
162
Pag 12
15104 - Lens cleaner, 50ml
It cleans glass quickly and effectively,
without leaving residue or odor.
Ideal for precision lens or prism cleaning.
OPTIKA
Laboratory stereozoom microscopes
SZN
SZN-1 / SZN-2 / SZN-3 / SZN-4 / SZN-5 / SZN-6 / SZN-7 /
SZN-8 / SZN-9 / SZN-10
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
SZN Series
Laboratory stereozoom microscopes
Page 163
SZN Series
The stereomicroscopes of the SZN series are instruments designed for laboratory and industry applications.
Their optical and mechanical qualities place them at the top of their category and the price/quality ratio is excellent. The stereomicroscopes share the
same optical system consisting of binocular and trinocular heads with zoom objectives.
The ten models of the SZN series find their proper application wherever professional instruments are required. Several accessories provide an ample
choice of configurations and applications.
SZN-1
Binocular zoom stereomicroscope 6,7x...45x, simple pillar stand.
SZN-2
Trinocular zoom stereomicroscope 6,7x...45x, simple pillar stand.
SZN-3
Binocular zoom stereomicroscope 6,7x...45x, stand with X-Led incident and Led transmitted illuminators.
SZN-4
Trinocular zoom stereomicroscope 6,7x...45x, stand with X-Led incident and Led transmitted illuminators.
SZN-5 Binocular zoom stereomicroscope 6,7x...45x, stand with X-Led incident (2 arms) and Led transmitted illuminators.
SZN-6
Trinocular zoom stereomicroscope 6,7x...45x, stand with X-Led incident (2 arms) and Led transmitted illuminators.
SZN-7
Binocular zoom stereomicroscope 6,7x...45x, simple overhanging stand.
SZN-8
Trinocular zoom stereomicroscope 6,7x...45x, simple overhanging stand.
SZN-9
Binocular zoom stereomicroscope 6,7x...45x, hinged overhanging stand.
SZN-10
Trinocular zoom stereomicroscope 6,7x...45x, hinged overhanging stand.
SZN-4
3
360°
Page 164
22
x-LED3
SZN Series
Heads
Binocular or trinocular, 360º rotating and 45º
inclined.
Interpupillary distance
Adjustable between 55 and 75 mm.
Dioptric compensation on both eyepiece tubes.
Eyepieces
EWF10x/22mm, high-point.
Working distance
110 mm.
Objectives
Parfocal achromatic zoom 0,67x...4,5x with
continuously variable magnification (max. 45x in the
standard configuration, can be increased to 225x by
using additional accessories).
Specimen stage:
Except overhanging models, the instruments are
fitted with a black/white disc for contrast and
specimen clamps.
Focusing
By means of rack and pinion system, controlled by a
pair of knobs.
Illumination
High efficiency X-LED3 incident illuminators (single or
double arm) and 100 mm white LED diffusing disc as
transmitted illuminator (60 chip LEDs).
Stands
The series has different stands for every requirement.
Simple for vision without transmitted illumination;
base for incident and transmitted illumination;
overhanging stands (simple or hinged), that allow
very large objects to be viewed and to be handled
or worked.
SZN-6
3
X-LED
360°
22
x-LED3
X-LED powered illumination system.
100mm wide illumination LED disc
Page 165
SZN Series - Models
X-LED
SZN-2
3
360°
22
SZN-4
X-LED powered illumination system.
360°
SZN-6
3
360°
Page 166
3
22
x-LED3
22
x-LED3
SZN Series - Models
SZN-7
2
360°
22
SZN-8
3
360°
22
Page 167
SZN Series - Models
SZN-9
2
SZN-10
3
Page 168
360°
22
360°
22
SZN Series - Technical specifications
Model
Head
Eyepiece
Objectives
Working Distance
Stand
Illumination
SZN-1
Binocular
EWF10x/22
0,67....4,5x
110mm
Pillar stand with rack
and pinion system
Without illumination.
SZN-2
Trinocular
EWF10x/22
0,67....4,5x
110mm
Pillar stand with rack
and pinion system
Without illumination.
SZN-3
Binocular
EWF10x/22
0,67....4,5x
110mm
Pillar stand with rack
and pinion system
Transmitted:
100 mm LED disc (60 chip LEDs)
Incident: OPTIKA X-LED3.
SZN-4
Trinocular
EWF10x/22
0,67....4,5x
110mm
Pillar stand with rack
and pinion system
Transmitted:
100 mm LED disc (60 chip LEDs)
Incident: OPTIKA X-LED3.
SZN-5
Binocular
EWF10x/22
0,67....4,5x
110mm
Pillar with rack and
pinion system
Transmitted:
100 mm LED disc (60 chip LEDs)
Incident: double arm OPTIKA X-LED3.
SZN-6
Trinocular
EWF10x/22
0,67....4,5x
110mm
Pillar with rack and
pinion system
Transmitted:
100 mm LED disc (60 chip LEDs)
Incident: double arm OPTIKA X-LED3.
SZN-7
Binocular
EWF10x/22
0,67....4,5x
110mm
Simple overhanging
stand
Without illumination.
SZN-8
Trinocular
EWF10x/22
0,67....4,5x
110mm
Simple overhanging
stand
Without illumination.
SZN-9
Binocular
EWF10x/22
0,67....4,5x
110mm
Hinged overhanging
stand
Without illumination.
SZN-10
Trinocular
EWF10x/22
0,67....4,5x
110mm
Hinged overhanging
stand
Without illumination.
Page 169
SZN Series - Accessories
ST-141
ST-142
ST-143
ST-144
ST-145
Eyepieces
Eyepieces (pair) WF10x/22mm.
Eyepieces (pair) WF15x/16mm.
Eyepieces (pair) WF20x/12mm.
Eyepieces (pair) WF25x/9mm.
Eyepiece micrometer WF10x/22mm.
SAO0.3
SAO0.5
SAO0.75
SAO1.5
SAO2
Additional lenses
Additional lens 0,3x (w.d. 287mm).
Additional lens 0,5x (w.d. 185mm).
Additional lens 0,7x (w.d. 120mm).
Additional lens 1,5x (w.d. 49mm).
Additional lens 2x (w.d. 28mm).
ST-146
ST-147
ST-147.1
M-173
Photo & Video adapters
Photo adapter for REFLEX camera with FULL FRAME sensor.
Focusable C-Mount adapter for 1/2” sensor.
C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
ST-088.SZN
ST-040.SZN
ST-100.SZN
ST-110.SZN
ST-111.SZN
ST-666.SZN
M-114
M-116
M-113.1
Additional Accessories
Polarising set (filters and rotating stage).
Darkfield condenser.
Hand moving stage.
Moving stage, with coaxial knobs.
Moving stage, with micrometric screws.
Heating stage for stereomicroscopes.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 170
15104 - Lens cleaner, 50ml
It cleans glass quickly and effectively,
without leaving residue or odor.
Ideal for precision lens or prism cleaning.
OPTIKA
Modular stereozoom microscopes for industry
MODULAR
SZM-B / SZM-T / SZN-B / SZN-T / SZP-6 / SZP-6ERGO / SZP-8
SZP-8ERGO / SZP-10 / SZP-10ERGO / ST-150 / ST-151 / ST-152
ST-153/ ST-155 / ST-156 / SZ-STL1 / SZ-STL1H / SZ-STL2 / SZ-STL2H
SZ-STL8 / SZ-STL5 / SZ-STL5LED
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
MODULAR Series
Modular stereozoom microscopes for industry
Page 171
MODULAR Series - Heads
The MODULAR series has been designed to match professional needs in industrial field.
With a wide range of stereozoom heads and special stands, it allows you to build your own model on the basis of your needs.
SZM-B
Stereomicroscope binocular zoom head 7x…45x, with eyepieces.
SZM-T
Stereomicroscope trinocular zoom head 7x…45x, with eyepieces.
SZN-B Stereomicroscope binocular zoom head 6,7x...45x, with eyepieces.
SZN-T
Stereomicroscope trinocular zoom head 6,7x...45x, with eyepieces.
SZP-6
Stereomicroscope binocular zoom head 8x...50x, with eyepieces, GALILEAN optical system.
SZP-6ERGO
Stereomicroscope binocular zoom ERGO head 8x...50x, with eyepieces, GALILEAN optical system.
SZP-8
Stereomicroscope binocular zoom head 8x...64x, with eyepieces, GALILEAN optical system.
SZP-8ERGO
Stereomicroscope binocular zoom ERGO head 8x...64x, with eyepieces, GALILEAN optical system.
SZP-10
Stereomicroscope binocular zoom head 8x...80x, with eyepieces; GALILEAN optical system.
SZP-10ERGO
Stereomicroscope binocular zoom ERGO head 8x...80x, with eyepieces; GALILEAN optical system.
Page 172
MODULAR Series - SZM Heads
SZM-B
2
20
SZM-T
3
20
SZM-B Binocular stereozoom head
45° inclined, 360° rotatable;
WF10x/20mm high-point widefield eyepieces;
Interpupillary distance: 51-75 mm;
Dioptric adjustment: +/-5 dp;
0,7x....4,5x zoom objective;
Zoom ratio: 6,43:1;
Working distance: 100 mm.
SZM-T Trinocular stereozoom head
45° inclined, 360° rotatable;
WF10x/20mm high-point widefield eyepieces;
Interpupillary distance: 51-75 mm;
Dioptric adjustment: +/-5 dp;
0,7x....4,5x zoom objective;
Zoom ratio: 6,43:1;
Working distance: 100 mm.
MODULAR Series - Accessories
ST-081
ST-082
ST-083
ST-084
Eyepieces
Eyepieces (pair) WF10x/20 mm.
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20 mm.
ST-085
ST-091
ST-086
ST-087
Additional lenses
Additional lens 0,5x (w.d. 165mm).
Additional lens 0,75x (w.d. 117mm).
Additional lens 1,5x (w.d. 47mm).
Additional lens 2x (w.d. 26mm).
ST-089
ST-090
ST-090.1
M-173
M-114
M-116
M-113.1
Photo & Video adapters
Reflex camera adapter for FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor..
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 173
MODULAR Series - SZN Heads
SZN-B Binocular stereozoom head
45° inclined, 360° rotatable;
WF10x/22mm high-point widefield eyepieces;
Interpupillary distance: 55-75 mm;
Dioptric adjustment: +/-5 dp:
0,67x....4,5x zoom objective;
Zoom ratio: 6,72;
Working distance: 110 mm.
SZN-B
2
SZN-T Trinocular stereozoom head
45° inclined, 360° rotatable;
WF10x/22mm high-point widefield eyepieces;
Interpupillary distance: 55-75 mm;
Dioptric adjustment: +/-5 dp:;
0,67x....4,5x zoom objective;
Zoom ratio: 6,72;
Working distance: 110 mm.
22
SZN-T
3
22
MODULAR Series - Accessories
ST-141
ST-142
ST-143
ST-144
ST-145
Eyepieces
Eyepieces (pair) WF10x/22mm.
Eyepieces (pair) WF15x/16mm.
Eyepieces (pair) WF20x/12mm.
Eyepieces (pair) WF25x/9mm.
Eyepiece micrometer WF10x/22mm.
SAO0.3
SAO0.5
SAO0.75
SAO1.5
SAO2
Additional lenses
Additional lens 0,3x (w.d. 287mm).
Additional lens 0,5x (w.d. 185mm).
Additional lens 0,7x (w.d. 120mm).
Additional lens 1,5x (w.d. 49mm).
Additional lens 2x (w.d. 28mm).
Page 174
ST-146
ST-147
ST-147.1
M-173
M-114
M-116
M-113.1
Photo & Video adapters
Photo adapter for REFLEX camera with FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
MODULAR Series - SZP Heads
SZP-6
SZP-6 Stereomicroscope binocular zoom head 8x...50x,
with eyepieces, GALILEAN optical system
30° inclined, 360° rotatable;
WF10x/22mm high-point widefield eyepieces;
Interpupillary distance: 52-75 mm;
Dioptric adjustment: +/-5 diopters;
Objective: 1xPL;
0,8x....5x zoom objective;
Zoom ratio: 6:1;
Working distance: 80 mm.
SZP-8 Stereomicroscope binocular zoom head 8x...64x, with eyepieces,
GALILEAN optical system
30° inclined, 360° rotatable;
WF10x/22mm high-point widefield eyepieces;
Interpupillary distance: 52-75 mm;
Dioptric adjustment: +/-5 diopters;
Objective: 1xPL;
0,8x....6,4x zoom objective;
Zoom ratio: 8:1;
Working distance: 80 mm.
2
22
ST-170
ST-172
SZP-ERGO
2
SZP-10 Stereomicroscope binocular zoom head 8x...80x, with eyepieces;
GALILEAN optical system
30° inclined, 360° rotatable;
WF10x/22mm high-point widefield eyepieces;
Interpupillary distance: 52-75 mm;
Dioptric adjustment: +/-5 diopters;
Objective: 1xPL;
0,8x....8x zoom objective;
Zoom ratio: 10:1;
Working distance: 80 mm.
22
Stand not included
Other available models SZP-6ERGO, SZP-8ERGO, SZP-10ERGO
Binocular ERGO head 0°-35° inclined, 360° rotatable
Diopter adjustment on both eyepieces +/- 5 diopters.
MODULAR Series - Accessories
ST-160
ST-161
ST-162
ST-163
Eyepieces
Eyepiece (pair) WF10x/22mm.
Eyepiece (pair) WF15x/15mm.
Eyepiece (pair) WF20x/12mm.
Eyepiece micrometer WF10x/22mm.
ST-165
ST-166
ST-167
Objectives
Objective 0,3x (w.d. 280mm).
Objective 0,5x (w.d. 118mm).
Objective 2x (w.d. 32,5mm).
ST-170
ST-171
Photo & Video attachments and adapters
Photo/Video beam splitter - 1 port.
Photo/Video beam splitter - 2 ports.
ST-172
M-173
ST-174
M-114
M-116
M-113.1 ST-176
Iris diaphragm module.
Photo adapter for APS-C and Full Frame Reflex cameras.
Focusable C-Mount adapter for 1/3” sensor.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
Protective glass for SZP Series.
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 175
MODULAR Series - Stands
The MODULAR series has been designed to match professional needs in industrial field.
With a wide range of stereozoom heads and special stands, it allows you to build your own model on the basis of your needs.
ST-150
Large stand, pillar type.
ST-151
Large stand, pillar type, with Led illumination.
ST-152
Large stand, fixed arm type.
ST-153
Large stand, fixed arm type, with Led illumination.
ST-155
Large stand, fixed arm type, with Led illumination (incident & transmitted).
ST-156
Large stand, fixed arm type, with Led illumination, coaxial macro & micro focusing knobs.
SZ-STL1
Simple overhanging stand, without head holder.
SZ-STL1H
Simple overhanging stand, with focusing system and head holder.
SZ-STL2
Hinged overhanging stand, without head holder.
SZ-STL2H
Hinged overhanging stand, with focusing system and head holder.
SZ-STL8
Pillar stand type, with double X-Led illuminator, ergonomic flexible arms and 60 chip Leds disc trans-illuminator.
SZ-STL5
Industrial stand, with table clamp and holder for wall mount.
SZ-STL5LED
Industrial stand, with table clamp and holder for wall mount with double X-Led illuminator.
Page 176
MODULAR Series - Stands
ST-150
ST-150
Large plain stand with head holder and focusing mechanism.
Pillar type. Base: 320x280mm. Pillar: Ø32x360mm.
ST-151
ST-151
Large plain stand with head holder and focusing mechanism.
LED trans-illuminator with intensity control. Pillar type.
Base: 320x280mm. Pillar: Ø32x360mm.
ST-152
ST-152
Large plain stand with head holder and focusing mechanism. Fixed arm
type. Base: 320x280mm. Fixed arm: 360mm.
ST-153
ST-153
Large plain stand with head holder and focusing mechanism.
LED trans-illuminator with intensity control. Fixed arm type.
Base: 320x280mm. Fixed arm: 360mm.
Page 177
MODULAR Series - Stands
ST-155
ST-155
Modern stand with large base.
LED trans-illuminator and LED incident illuminator, both with intensity
control.
*Head not included.
305mm
ST-156
Modern stand with large base. LED trans-illuminator and LED incident
illuminator, both with intensity control. Coaxial coarse and fine focusing
system.
* Head not included.
ST-156
330mm
285mm
SZ-STL1H
SZ-STL1H
Simple overhanging stand with head holder. Base dimensions: 230x230mm.
Pillar: Ø32x380mm. Horizontal arm: 430mm.
* Head not included
SZ-STL1
Simple overhanging stand without head holder and without focusing
mechanism (head and focus sold separately).
Base dimensions: 230x230mm. Pillar: Ø32x380mm.
Horizontal arm: 430mm.
Page 178
SZ-STL1
MODULAR Series - Stands
SZ-STL2H
SZ-STL2H
Hinged overhanging stand with head holder.
Base dimensions: 260x210mm.
Pillar: Ø32x380mm. Horizontal arm: 550mm.
* Head not included
SZ-STL2
Simple overhanging stand without head holder and without focusing mechanism
(head and focus sold separately).
Base dimensions: 260x210mm.
Pillar: Ø32x380mm. Horizontal arm: 550mm.
SZ-STL2
SZ-STL8
SZ-STL8
Modern stand with small base. With 2
incident X-LED3 illuminators on flexible
arms, and high brightness LED disc trans
-illuminator (100mm diameter).
Page 179
MODULAR Series - Stands
SZ-STL5
SZ-STL5
Industrial stand, table camp and holder for wall mount.
Weight Capacity: 3kg~8kg.
Maximum Extension:
577mm.
Depth from Pole (Closed): 75mm.
Tilt adjustment: +/-90 degree.
Swing adjustment: +/-90 degree.
* Head not included
SZ-STL5
SZ-STL5LED
Stand with white X-LED3 incident illumination system. Intensity control using two dedicated knobs.
LED power: 3.5W (x2), each comparable to a 50W
halogen bulb.
Color temperature: 6300K.
LED average lifetime: approx. 50000h.
Provided power supply: 6V 2,5A.
* Head not included
Page 180
SZ-STL5LED
OPTIKA
Stereozoom microscope for SMD inspection
SZM-SMD
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
SZM-SMD Model
Stereozoom microscope for SMD inspection
Page 181
SZM-SMD Model
The SZM-SMD has been designed specifically for the inspection of solder connections, rework and repair of electronic circuits and for mounting small
electronic components.
One-touch sliding movement allows the user to quickly change from vertical to oblique viewing.
Head
Trinocular, 45°inclined, 360° rotating. Microscope for SMD inspection.
Eyepieces
WF10X/20mm, high-point.
Objectives
Zoom 0,7x...4,5x.
Magnification
7x...45x
Illumination
Optional.
SMD attachment:
Rotatable 360°, vertical working distance 103mm.
Oblique working distance 103mm.
With inclination adjusting mechanism.
CLD-01 + CL-11.1
Page 182
SZM-SMD Model
SZM-SMD
3
360°
20
Page 183
SZM-SMD Model - Accessories
ST-081
ST-082
ST-083
ST-084
Eyepieces
Eyepieces (pair) WF10x/20 mm.
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20 mm.
ST-089
ST-090
ST-090.1
M-173
M-114
M-116
M-113.1 Photo & Video adapters
Reflex camera adapter for FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 184
15104 - Lens cleaner, 50ml
It cleans glass quickly and effectively,
without leaving residue or odor.
Ideal for precision lens or prism cleaning.
OPTIKA
Illumination and sample positioning
ACCESSORIES
CLD-01 / CL-11.1 / CL-12 / CL-15.1 / CL-16.1 / CL-20 / CL-30 / CL-31 /
CL-41 / ST-100 / ST-110 / ST-111 / M-666 / ST-666
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
ACCESSORIES
Illumination and sample positioning
Page 185
ACCESSORIES
To achieve the ideal work situation, it is important to combine the right microscope with the right accessories.
We offer WIDE range of devices: external illuminator, moving stages, heating stages.
Choose the right accessories is an essential process in order to obtain the best performance from your microscope.
CLD-01
Cold light X-LED illuminator, 14W extra-efficiency system.
CL-15.1 Ring light Led illuminator, with 10-steps on-board brightness control.
CL-16.1 Ring light Led illuminator, with continuous and external brightness control.
CL-20
Ring light fluorescent bulb illuminator, with ON/OFF button.
CL-30
Double-arm Led illuminator, without brightness control.
CL-31
Double-arm Led illuminator, with brightness control.
CL-41
Double-arm X-Led3 illuminator, with brightness control.
Page 186
ACCESSORIES Series - CLD-01
CLD-01
Cold light X-LED illuminator, 14W extraefficiency system.
Light source
High power 14W LED
Chromaticity coordinates (x,y)
0.320, 0.320 (pure white)
Optical power (with double-arm option)
Illuminance (at 10 cm distance): 70000 lux
Power supply
Brightness control potentiometer.
External power supply provided.
Input: 110/240 Vac 50/60 Hz; output: 6 Vdc 5A
Dimensions
Length: 200 mm
Width: 120 mm
Weight: 4,1 Kg
CLD-01 + CL-11.1
CLD-01 Accessories
The output can be coupled to the following accessories:
CL-11.1: Double-arm optical fiber guide with focusing lenses.
Arm length 500 mm.
CL-17: Focusing lens (pair) with built-in polarizer filter (for CL-11.1)
CL-12: Ring optical fiber guide (length 700 mm).
Guide diameter 16 mm. Diameter of the fixing ring: 55mm.
The circular end is suitable for all stereo series.
Page 187
ACCESSORIES - Illuminators
CL-30
Double-arm Led illuminator.
Light sources: LED (x2);
With 2W high efficiency LEDs.
Chromaticity coordinates (x,y): 0.320, 0.320;
Luminous flux: 80 lm each arm;
Emission angle: 35°;
Power supply: 12Vdc, 1500 mA;
Without brightness control.
CL-31 Double-arm Led illuminator, with brightness control.
Light sources: LED (x2);
With 2W high efficiency LEDs.
Chromaticity coordinates (x,y): 0.320, 0.320;
Luminous flux: 80 lm each arm;
Emission angle: 35°;
Power supply: 12Vdc, 1500 mA;
With brightness control.
CL-31
CL-41
CL-41
Double-arm X-Led illuminator, with brightness control.
With 3,6W high efficiency X-LED3.
Chromaticity coordinates (x,y): 0.320, 0.320);
Luminous flux: 400 lm each arm;
Emission angle: 25°;
Power supply: 12Vdc, 1500 mA;
With brightness control.
CL-11.1
Double-arm guide for CLD-01, with focusing lenses.
Arm length 500 mm.
Each arm fitted with focusable lens adapter.
Optional accessory:
CL-17: lens pair with built-in linear polarizer.
Page 188
CL-11.1
ACCESSORIES - Illuminators
CL-16.1
Uniform illumination on a wide
area. Number of single LEDs: 144
4 illumination sectors addressed
by individual buttons.
CL-15.1
CL-16.1
Ring light Led illuminator, with continuous and external brightness control.
External intensity light control. Number of LEDs: 144.
Four illumination sectors controlled by individual buttons. Diameter of the fixing
ring: 60mm. Suitable for all series.
CL-15.1
Ring light Led illuminator, with 10-steps on-board brightness control.
Intensity light control. Number of LEDs: 72.
Four illumination sectors controlled by a MODE button. Diameter of the fixing ring:
60mm. Suitable for all series.
CL-20
Ring light fluorescent bulb illuminator.
Fluorescence ring light illuminator, 8W. Diameter of the fixing ring: 60mm. Suitable
for all series.
Optional lenses for arms:
CL-21: Spare fluorescent lamp, 8W (for CL-20)
CL-20
CL-12
Ring optical fiber guide for CLD-01.
Lenght 700 mm, diameter 16 mm. The circular end is suitable for all series , by using
the three locking screws.
Diameter of the fixing ring: 55mm.
CL-12
Page 189
ACCESSORIES
ST-100 Moving stage *
Manual positioning stage.
Dimensions: 185x145mm.
Range: 56mm (X) x 35mm (Y).
ST-110 Moving stage, with knobs *
Manual positioning stage, using knobs for X-Y movements.
Dimensions: 180x155mm.
Range: 75mm (X) x 54mm (Y).
ST-111 Moving stage, with micrometer screws *
Manual positioning stage, using micrometer screws.
Dimensions: 185x145mm.
Range: 25mm (X) x 25mm (Y).
Micrometer screws resolution: 0.01mm.
M-666 Heating stage for biological microscopes*
Temperature range: 20°C (room temperature) – 50°C.
Temperature setting resolution: 1°C.
Temperature measuring resolution: 0.1°C.
Display: LED display for set temperature.
LED display for measured temperature.
Power supply: Input: 110/220Vac 50/60Hz. Power: 50W.
ST-666 Heating stage for stereomicroscopes *
Temperature range: 20°C (room temperature) – 50°C.
Temperature setting resolution: 1°C.
Temperature measuring resolution: 0.1°C.
Display: LED display for set temperature.
LED display for measured temperature.
Power supply: Input: 110/220Vac 50/60Hz. Power: 50W.
ST-100
ST-110
ST-111
* The model of microscope that will be used with this accessory must
be specified.
M-666
Page 190
ST-666
OPTIKA
Gemological stereomicroscopes
OPTIGEM
SZM-GEM-1 / SZM-GEM-2
OPTIGEM-1 / OPTIGEM-2 / OPTIGEM-3 / OPTIGEM-4
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
OPTIGEM Series
Gemological stereomicroscopes
Page 191
OPTIGEM Series
Optika Microscopes has designed a series dedicated to the science of Gemology.
These microscopes have been especially designed to observe samples of precious stones and jewels.
This series offers instruments equipped with multiple image-enhancing illumination systems, tilting stands and darkfield condensers developed for any
gemological needs.
SZM-GEM-1
Gemological stereozoom 7x...45x, binocular head with pillar stand.
SZM-GEM-2
Gemological stereozoom 7x...45x, trinocular head with pillar stand.
OPTIGEM-1
Gemological binocular stereomicroscope, tilting stand, incident & transmitted Led illumination system.
OPTIGEM-2
Gemological trinocular stereomicroscope, tilting stand, incident & transmitted Led illumination system.
OPTIGEM-3
Gemological binocular stereomicroscope, tilting stand, fluorescent bulb (incident) & halogen bulb (transmitted).
OPTIGEM-4
Gemological trinocular stereomicroscope, tilting stand, fluorescent bulb (incident) & halogen bulb (transmitted).
Page 192
OPTIGEM Series - SZM-GEM -1/2 models
SZM-GEM-2
Heads
SZM-GEM-1: Binocular rotating 360° and 45° inclined.
SZM-GEM-2: Trinocular rotating 360° and 45° inclined.
Diopter adjustment on both eyepieces.
Interpupillary adjustment 51-75 mm.
Eyepieces
Widefield eyepieces WF10x/20mm with field number 20.
Objective
Parfocal achromatic objective 1x. Working distance: 100 mm.
Zoom range: 0,7x - 4,5x. Zoom factor: 6,428:1.
Specimen stage:
Specimen clamps. Adjustable gemology clip.
Focusing
By means of a rack and pinion controlled by a pair of knobs
placed on both sides of the stereomicroscope.
Microscope stand
Pillar stand height 25 cm. Base: 26x20x6h cm. Weight: 6 Kg.
Illumination
Incident illumination: dichroic halogen lamp (12V/15W) with
angle and brightness adjustment.
Transmitted illumination: pure white (6300K) LED system for
observation in brightfield (with diffusive LED disc) and darkfield (with side-emitting LED ring).
Through a selector it’s possible to choose between 3 modes:
brightfield only, darkfield only, or both brightfield and darkfield.
Provided with a lever for the insertion of a black background
in order to improve the darkfield observation.
Voltage: 110/240Vac, 50/60Hz, 1A ; Fuses: T1A 250V
Max. required power: 30W.
3
360°
20
LED
SZM-GEM-1/2 models
These two models are typical gemological microscopes
with fixed stand.
An ultrabright LED-based electronic condenser with
intensity control, allows to switch from bright to dark
field; it also produces perfectly the colour of daylight.
The condenser uses a new optical configuration
especially created in order to obtain a perfect dark-field
application.
Page 193
OPTIGEM Series - OPTIGEM -1/2 models
The OPTIGEM-1 and OPTIGEM-2 are revolutionary 2-in-1 gemology instruments that can be used both as a vertical and
as a horizontal microscopes, at the turn of a knob and without disassembling any part.
An ultrabright LED-based electronic condenser with intensity control, allows to switch from bright to dark-field; it also
produces perfectly the colourof daylight. The condenser uses a new optical configuration especially created in order to
obtain a perfect dark-field application. An additional flexible arm and velvet-field slider produces for extra contrast, crisp
and vibrant images even in a brightly lit environment. A wide range of optional accessories completes these intruments:
from gemology clip, an iris aperture diaphragma polarization analysis kit, an optical unit to switch the dark-field from
a “sharp” (gem exhibition) to a “soft” (diamond analysis) mode translating cell holder with vacuum pick-up and quartz
immesion cells complete and enhance the instrument usability. All the accessories can be stacked, in any order, while using
the microscope in either horizontal or vertical configuration. The microscope body can be rotated through a full 360°,
yet keeping the base sturdly fixed on the table, to show gems to a customer, or to share opinions with a colleague.
OPTIGEM-1
2
360°
LED Illumination
Incident illumination: LED flexible arm with brightness adjustment.
Transmitted illumination: LED system for observation in brightfield (with diffusive
LED disc) and darkfield (with side-emitting LED ring). Through a selector it’s possible
to choose between 3 modes: brightfield only, darkfield only, or both brightfield and
darkfield.
Provided with a lever for the insertion of a black background in order to improve
the darkfield observation. LED temperature color: 6300K (pure white).
External power supply provided. Input: 110/240Vac, 50/60Hz; Output: 12V 1A. Max.
required power: 15W.
Page 194
22
LED
OPTIGEM Series - OPTIGEM -1/2 models
Heads
OPTIGEM-1: Binocular rotating 360° and 45° inclined.
OPTIGEM-2: Trinocular rotating 360° and 45° inclined.
Diopter adjustment on both eyepieces.
Interpupillary adjustment 51-75 mm.
Eyepieces
Widefield eyepieces WF10x/22 with field number 22.
Objective
Parfocal achromatic objective 1x. Working distance: 110 mm.
Zoom range: 0,7x - 4,5x. Zoom factor: 6,428:1.
Specimen stage:
Adjustable gemology clip. 360° rotating base. Pair of rods for
assembling optional accessories.
Focusing
By means of a rack and pinion controlled by a pair of knobs
placed on both sides of the stereomicroscope.
Microscope stand
Rack-and-pinion stand (it can be inclined through full 90° for
horizontal observation, and rotated 360°).
Base: 27x21x6h cm. Weight: 6 Kg.
OPTIGEM-2
3
360°
22
LED
Page 195
OPTIGEM Series - OPTIGEM - 3/4 models
OPTIGEM - 3/4 models
These models are classic gemological microscopes with tilting
stand. The darkfield condenser uses a typical optical configuration, based on halogen illumination and a classic reflecting
system.
A flexible arm with a fluorescent tube simulates the color of
daylight for accurate color grading.
Heads
OPTIGEM-3: Binocular rotating 360° and 45° inclined.
OPTIGEM-4: Trinocular rotating 360° and 45° inclined.
Diopter adjustment on both eyepieces.
Interpupillary adjustment 55-75 mm.
Eyepieces
Widefield eyepieces WF10x/22 with field number 22.
Objectives
Parfocal achromatic objective 1x. Working distance: 110 mm.
Zoom range: 0,67x - 4,5x. Zoom factor: 6,71:1.
Specimen stage:
Adjustable gemology clip. 360° rotating base.
Focusing
By means of a rack and pinion controlled by a pair of knobs
placed on both sides of the stereomicroscope.
Microscope stand
Rack-and-pinion stand (it can be inclined 45°).
Base: 305x260x70h mm.
Weight: 7 Kg.
Illumination
Incident illumination: flexible arm with fluorescent tube 7W
6400K (pure white). Independent ON/OFF switch.
Transmitted illumination: system for observation with brightfield and darkfield, based on 30W halogen illumination and
reflecting system. Brightness adjustment.
Iris diaphragm and removable black background for contrast
enhancement for darkfield application.
Input: 240Vac, 50Hz;
Max. required power: 45W.
Page 196
OPTIGEM-3
2
360°
22
OPTIGEM-4
3
360°
22
OPTIGEM Series - Technical specifications
Model
Head
Eyepieces
Objectives
Stand
Illumination
SZM-GEM-1
Binocular
WF10x/20mm
0,7 .... 4,5x Zoom
Pillar stand
Incident illumination: dichroic halogen lamp 12V/15W.
Transmitted illumination: Diffusive LED disc for observation
in brightfield and side-emitting LED ring for observation in
darkfield.
SZM-GEM-2
Trinocular
WF 10x/20mm
0,7x....4,5x zoom
Pillar stand
Incident illumination: dichroic halogen lamp 12V/15W.
Transmitted illumination: Diffusive LED disc for observation
in brightfield and side-emitting LED ring for observation in
darkfield.
OPTIGEM-1
Binocular
WF10x/22mm
0,7 .... 4,5x Zoom
Gemological
stand
Incident illumination: LED flexible arm with brightness
adjustment.
Transmitted illumination: Diffusive LED disc for observation
in brightfield and side-emitting LED ring for observation in
darkfield.
OPTIGEM-2
Trinocular
WF10x/22mm
0,7 .... 4,5x Zoom
Gemological
stand
Incident illumination: LED flexible arm with brightness
adjustment.
Transmitted illumination: Diffusive LED disc for observation
in brightfield and side-emitting LED ring for observation in
darkfield.
OPTIGEM-3
Binocular
WF10x/22mm
0,67.... 4,5x Zoom Gemological
stand
Incident illumination:
flexible arm with fluorescent tube 7W (pure white).
Transmitted illumination: 30W halogen bulb and a dedicated
reflecting system for observation with brightfield and
darkfield.
OPTIGEM-4
Trinocular
WF10x/22mm
0,67.... 4,5x Zoom Gemological
stand
Incident illumination:
flexible arm with fluorescent tube 7W (pure white).
Transmitted illumination: 30W halogen bulb and a dedicated
reflecting system for observation with brightfield and
darkfield
Page 197
OPTIGEM Series - Accessories
ST-230
ST-082
ST-083
ST-084
ST-086
ST-087
ST-089
ST-090
ST-090.1
M-173
M-114
M-116
M-113.1 Accessories for SZM-GEM - 1/2:
Polarizing analisys kit (only for SZM-GEM series).
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20 mm.
Additional lens 1,5x (w.d. 47mm).
Additional lens 2x (w.d. 26mm).
Reflex camera adapter for FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
ST-201
ST-207
ST-202
ST-203
ST-204
ST-205
ST-082
ST-083
ST-084
ST-086
ST-087
ST-089
ST-090
ST-090.1
M-173
M-114
M-116
M-113.1 Accessories for OPTIGEM - 1/2:
Iris aperture diaphragm for darkfield (only for OPTIGEM 1 & 2).
Iris aperture diaphragm for standard illuminator (only for OPTIGEM 1 & 2).
Polarizing analisys kit (only for OPTIGEM 1 & 2).
Glass immersion cell (only for OPTIGEM 1 & 2).
Translating cell holder (only for OPTIGEM 1 & 2).
Vacuum pick-up (with electric vacuum pump).
Eyepieces (pair) WF15x/15 mm.
Eyepieces (pair) WF20x/10 mm.
Eyepiece micrometer WF10x/20 mm.
Additional lens 1,5x (w.d. 47mm).
Additional lens 2x (w.d. 26mm).
Reflex camera adapter for FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
ST-231
ST-142
ST-143
ST-144
ST-145
SAO1.5
SAO2
ST-146
ST-147
ST-147.1
M-621
M-173
M-114
M-116
M-113.1 Accessories for OPTIGEM - 3/4:
Polarizing analisys kit (only for OPTIGEM 3 & 4).
Eyepieces (pair) WF15x/16mm..
Eyepieces (pair) WF20x/12mm.
Eyepieces (pair) WF25x/9mm.
Eyepiece micrometer WF10x/22mm.
Additional lens 1,5x (w.d. 49mm).
Additional lens 2x (w.d. 28mm).
Photo adapter for REFLEX camera with FULL FRAME sensor.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Halogen bulb 6V/30W.
Photo adapter for APS-C and Full Frame Reflex cameras.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Ring adapter, 30mm (for monocular and binocular microscopes).
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 198
15104 - Lens cleaner, 50ml
It cleans glass quickly and effectively,
without leaving residue or odor.
Ideal for precision lens or prism cleaning.
OPTIKA
Metallurgical and measuring microscopes
INDUSTRY
XC-100L / XZ-1 / XZ-2 / B-383 MET
B-500 MET / B-1000 MET / XDS-3 MET
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
INDUSTRY Series
Metallurgical and measuring microscopes
Page 199
INDUSTRY Series
This series has been designed to handle and observe samples of any dimension.
Industrial microscopes incorporate many complex designs that aim to improve resolution and sample contrast.
From models designed for routine analysis up to models dedicated to industrial laboratory and quality control, Optika Microscopes is able to satisfy any
demand in this field.
XC-100L
Portable monocular microscope for surface measurements, 100x magnification, incident light pen.
XZ-1
Measuring monozoom microscope 7x...45x, incident & transmitted illumination.
XZ-2
Measuring monozoom videomicroscope 7x...45x, with 8” LCD screen, incident ring Led illumination.
B-383MET
Trinocular metallurgical microscope, IOS MET objectives, X-Led incident & transmitted illumination.
B-500MET
Upright Metallurgical Microscope, IOS MET objectives, X-Led incident & transmitted illumination.
B-1000MET
Upright advanced metallurgical microscope.
XDS-3MET
Trinocular Inverted metallurgical microscope, IOS LWD MET Objectives.
B-383MET
3
360°
20
x-LED3
IOS
Page 200
INDUSTRY Series - XC-100L
XC-100L
18
1
XC-100L
Portable microscope for measurements. Fitted with WF10x/18mm micrometric eyepiece with cross divided into tenths of a millimetre.
10x achromatic objective (total magnification 100x); focusing controlled
by a rack and pinion mechanism; adjustable battery powered penlight
lighting unit.
INDUSTRY Series - XZ-1 and XZ-2
XZ-1
Bench monocular microscope for measuring and viewing surfaces with a
zoom objective.
Fitted with WF10x/18mm micrometric eyepiece with cross divided into
tenths of a millimetre. 0.7x...4.5x achromatic zoom objective (max. magnification 45).
Focusing controlled by a rack and pinion mechanism.
Double lighting unit for incident and transmitted light fitted with low voltage halogen bulbs (12V/10W). Working distance 90 mm.
XZ-2
Bench binocular microscope for measuring and viewing surfaces with a
zoom objective and TFT LCD screen (8”).
0.7x...4.5x achromatic zoom objective.
Focusing controlled by a rack and pinion mechanism.
Working distance: 96 mm.
LED ring light generator with brightness control.
CCD colour camera (380 TVlines). 8” TFT LCD screen with electronic graduated measuring cross.
XZ-1
360°
18
1
XZ-2
3
360°
18
LED
Page 201
INDUSTRY Series - B-383MET
B-383MET - Upright metallurgical microscope
Head: Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
Eyepieces: WF10X/20mm.
Nosepiece: 5-position reversed revolving nosepiece. Ball bearing rotation.
Objectives: PLAN IOS MET (no cover slide) 4x/0.10, 10x/0.25, 20x/0.40, 50x/0.75.
Focusing system: Coaxial coarse and fine.
Stage: Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm.
Belt-drive in X direction. Glass insert for sample support.
Condenser: Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Illumination: Transmitted light: X-LED3, with manual brightness control.
Power supply: External power supply: Input 100-240Vac 50-60Hz / Output 6Vdc 1A.
Metallurgical Attachment: High-power white X-LED3; field and aperture diaphragms.
Filters: Blue, polarizer & analyzer.
B-383MET
3
360°
20
x-LED3
IOS
Page 202
INDUSTRY Series - B-500MET
B-500MET - Upright metallurgical microscope
Head: Trinocular, 30° inclined, 360° rotating.
Eyepieces: WF10X/22mm.
Nosepiece: 5-positions, reversed.
Objectives: PLAN IOS MET (no cover slide) IOS 5x/0.15, 10x/0.3, 20x/0.45, 50x/0.55,
100x/0.9 (dry).
Magnifications: 50x, 100x, 200x, 500x, 1000x.
Focusing system: Coaxial coarse and fine.
Stage: Double layer with mechanical sliding stage, 175x145 mm, moving range
76x52 mm.
Condenser: 0,7 N.A. swing-out type, with iris diaphgram, centrable and focusable.
Illumination: OPTIKA X-LED3 system. Brightness is adjustable.
Metallurgical Attachment: High-power white X-LED3 system with brightness control; field and aperture diaphragms (centrable). Simple sliding darkfield system.
Filters: Blue, polarizer & analyzer.
B-500MET
3
360°
22
1000x
x-LED3
IOS
Page 203
B-1000MET Model
B-1000MET
3
360°
x-LED8
22
1000x
IOS
B-1000MET
Type:
Upright advanced metallurgical
microscope
Description:
Microscope for advanced and research applications.
Dye-cast frame, with high stability and ergonomy,
for transmitted and incident light observation.
Stage
Maximum sample height: 43mm.
Version for material analysis
(with brightfield and darkfield Epi-Illumination).
Transmitted illumination X-LED8 (8W power).
Special attachment with built-in 100W halogen lamp.
Page 204
B-1000MET Model - Configuration chart
Build the microscope that suites your needs by choosing among the components of configuration chart:
M-1001
WF10x/22mm Eyepieces
M-1011
Trinocular head
M-781
Eyepiece micrometer
high-point
M-1012
Binocular ERGO head
M-1035 Metallurgical attachment for brightfield and darkfield
M-1021 Body with manual focus
M-1022 Body with motorized focus
M-1045 Quintuple revolving Nosepiece for
darkfield metallurgical objectives
M-1046 Quintuple motorized revolving Nosepiece
for darkfield metallurgical objective
M-1099 2.5x
M-1100 5x
M-1101 10x
M-1102 20x
M-1103 50x
M-1104 100x
M-1140
Standard stage
IOS LWD MET Plan
Objectives for brightfield
M-1141
Belt drive stage
IOS MET Plan objectives
for darkfield
M-1143
Belt drive stage - MPC surface
M-1147
Motorized stage
M-1109 5x
M-1110 10x
M-1111 20x
M-1112 40x
M-1113 50X
M-1114 100x
M-1148
Metallographic stage
M-1154
0,7 N.A. swing-out condenser
Page 205
INDUSTRY Series - XDS-3MET
XDS-3MET
3
22
Page 206
IOS
XDS-3MET - Inverted metallurgical microscope
Head: Trinocular, 45° inclined.
Eyepieces: WF10X/22mm.
Nosepiece: 5-positions.
Objectives: LWD PLAN IOS MET (no cover slide): 5x/0.15, 10x/0.3, 20x/0.45, 50x/0.55.
Magnifications: 50x, 100x, 200x, 500x.
Focusing system: Coaxial coarse and fine.
Stage: 250x230mm; mechanical stage with lowered ergonomic coaxial controls.
X-Y range: 120x80mm.
Diaphragms: Field and aperture diaphragms (centrable).
Illumination: 12V/50W halogen bulb in external case. Centrable bulb and brightness
control.
Filters: Blue, polarizer & analyzer.
INDUSTRY Series - Technical specifications
Model
Eyepiece
Objectives
Working
Distance
Stand
Illumination
XC-100L Monocular
WF10x/18mm
micrometric
10x
7,7 mm
Portable stand
Incident illumination: xenon penlight
XZ-1
Monocular
WF10x/18mm
0,7x....4,5x zoom
90 mm
Pillar stand
Incident illumination: halogen bulbs 12V/10W
Transmitted illumination: halogen bulbs 12V/10W
XZ-2
Binocular
WF10x/18mm
0,7x.... 4,5x zoom
96 mm
Pillar stand with 8”
TFT LCD sceen
Incident illumination: LED ring light with brightness
control
Model
Head
Head
B-383MET Trinocular
B-500MET Trinocular
Eyepieces
Objectives
Stage
Focusing
WF10x/20mm
Quintuple
PLAN IOS MET
4x, 10x, 20x, 50x reversed
Double layer
mechanical sliding
stage, dimensions
216x150mm, moving
range 78x54mm.
Belt-drive in X direction.
Glass insert for sample support.
Coaxial coarse
and fine system,
with limit stop
Abbe condenser,
sliding-in, N.A.
1.25 with centering
system.
Transmitted light: X-LED3,
with manual brightness
control.
Metallurgical Attachment:
High-power white X-LED3
system with brightness
control.
WF10x/22mm
PLAN IOS MET Quintuple
(no cover slide) reversed
5x, 10x, 20x, 50x,
100x (dry)
Double layer with
mechanical sliding
stage, 175x145 mm,
moving range
76x52 mm. Glass
insert for sample
support.
Coaxial coarse
and fine system,
with limit stop
Brightfifield condenser:
0,7 N.A. swing-out
type, with iris diaphgram, centrable and
focusable
Transmitted illumination:
X-LED3 illumination system.
Metallurgical Attachment:
High-power white X-LED3
system with brightness
control.
WF10x/22mm
LWD PLAN IOS
MET
(no cover slide)
5x, 10x,
20x, 50x
B-1000MET
XDS-3MET
Nosepiece
Condenser
Illumination
See the configuration chart for your own configuration
Trinocular
Quintuple
reversed
250X230mm;
mechanical stage
with lowered
ergonomic coaxial
controls. X-Y range:
120x80 mm
Coaxial coarse
and fine system,
with limit stop
---------------------- 12V/50W halogen bulb in
external case. Centrable
bulb and brightness control.
Page 207
INDUSTRY Series - Accessories
M-899
M-004
M-114
M-116
M-173
XC-100L - Measuring microscope
Pen illuminator.
Eyepiece with micrometer WF10x/18mm.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
M-001
M-003
M-005
ST-012
ST-014
ST-028
M-013
ST-029
M-114
M-116
M-173
XZ-1 - Measuring monozoom microscope
Eyepiece H5x.
Eyepiece WF16x/12mm.
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
White/black object-plate, type 2 dia. 95 mm.
Glass stage, type 2, dia. 95 mm.
Halogen bulb 12V/10W.
Halogen bulb 12V/10W, with dichroic mirror.
Dust cover type 12.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
M-001
M-003
M-004
M-005
M-114
M-116
M-173
XZ-2 - Measuring monozoom videomicroscope
Eyepiece H5x.
Eyepiece WF16x/12mm.
Eyepiece with micrometer WF10x/18mm.
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.s.
M-160
M-161
M-162
M-163
M-005
M-337
M-338
M-339
M-335
M-114
M-116
M-173
M-069 B-383MET - Upright metallurgical microscope
Eyepiece WF10x/20mm.
Eyepiece EW15x/16mm.
Eyepiece WF20x/10mm.
Micrometer eyepiece WF10x/20mm.
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
Objective PLAN IOS MET 4x/0.10.
Objective PLAN IOS MET 10x/0.25.
Objective PLAN IOS MET 20x/0.40.
Objective PLAN IOS MET 50x/0.75.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
Solar battery pack.
M-680
M-780
M-601
M-781
M-005
M-693.1
M-694.1
M-695.1
M-696.1
M-698.2
M-613
M-615
M-614
M-619
M-699
B-500MET - Upright metallurgical microscope
Ergo binocular head 30°-60°.
Eyepiece EWF10x/22mm.
Eyepiece WF15x/16mm.
Eyepiece micrometer EWF10x/22mm.
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
Objective IOS LWD MET PLAN 5x/0,15.
Objective IOS LWD MET PLAN 10x/0,3.
Objective IOS LWD MET PLAN 20x/0,45.
Objective IOS LWD MET PLAN 50x/0,55).
Objective IOS MET PLAN 100x/0,90.
Polarising set (Polarizer and Analyzer filters).
Lambda filter for polarising set.
Rotating table for polarising set.
Photo adapter for REFLEX camera with FULL FRAME sensor.
Universal adapter for M-114, M-116, M-173 and eyepiece cameras.
Page 208
M-620
M-620.1
M-620.2
M-034
M-975
M-977
M-979
M-989
M-690
M-114
M-116
M-173
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Focusable C-Mount adapter for 2/3” sensor.
Dust cover type 5.
Blue filter, 45 mm diameter.
Green filter, 45 mm diameter.
Yellow filter, 45 mm diameter.
Frosted glass filter, 45 mm diameter.
Eyecup (pair).
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
M-625
M-601
M-602
M-005
M-735
M-736
M-737
M-738
M-746
M-619
M-699
M-789
M-789.1
M-789.2
M-622
M-036
M-114
M-116
M-173
M-788
XDS-3MET - Inverted metallurgical microscope
Eyepiece EWF10x/22mm.
Eyepiece WF15x/16mm.
Eyepiece micrometer EWF10x/22mm.
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
Objective IOS LWD MET PLAN 5x/0,15.
Objective IOS LWD MET PLAN 10x/0,3.
Objective IOS LWD MET PLAN 20x/0,45.
Objective IOS LWD MET PLAN 50x/0,55.
Objective IOS LWD MET PLAN 100x/0.80.
Photo adapter for REFLEX camera with FULL FRAME sensor.
Universal adapter for M-114, M-116, M-173 and eyepiece cameras.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Focusable C-Mount adapter for 2/3” sensor.
Halogen bulb 12V/50W (only for XDS-3MET).
Dust cover type 7.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
Photo adapter for REFLEX camera with FULL FRAME sensor.
M-005
M-613
M-615
M-617.1N
M-781
CL-35
M-690
M-619
M-173
M-699
M-620
M-620.1
M-620.2
M-114
M-116
15104
B-1000MET - Metallurgical microscope
26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm.
Polarizing set (Polarizer and Analyzer filters).
Lambda filter for polarizing set.
Phase contrast set with IOS PLAN objectives 40x.
WF10x/22mm micrometer eyepiece (10mm, 0.1mm div.).
Halogen Lamp 24V 100W (only for metallurgical attachment M-1035).
Eyecup (pair).
Photo adapter for REFLEX camera with FULL FRAME sensor.
Photo adapter for APS-C and Full Frame Reflex cameras.
Universal adapter for M-114, M-116, M-173 and eyepiece cameras.
Focusable C-Mount adapter for 1/3” sensor.
Focusable C-Mount adapter for 1/2” sensor.
Focusable C-Mount adapter for 2/3” sensor.
C-Mount adapter for 1/2” sensor.
C-Mount adapter for 2/3” sensor.
Lens cleaner, 50ml
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on Digital section.
Page 209
OPTIKA
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
Headquarters and Manufacturing Facilities
OPTIKA S.r.l.
®
Via Rigla, 30 - 24010 Ponteranica (BG) - Italia - Tel.: +39 035.571.392 - Fax: +39 035.571.435 - info@optikamicroscopes.com
Optika Sales branches
OPTIKA Spain OPTIKA China ®
spain@optikamicroscopes.com
®
china@optikamicroscopes.com
OPTIKA USA usa@optikamicroscopes.com
OPTIKA Hungary hungary@optikamicroscopes.com
®
®
Download PDF