Using the Lectern Controls Room 3255 To use the system, touch the

Using the Lectern Controls Room 3255
To use the system, touch the screen to begin
The control for the lights is located at the bottom of the screen. The On/Off button will turn the lights
on or off. The HALF button will switch between half power and either full power or off, depending on
whether the lights were on or off when pressed. The FRONT button controls power for the front row of
lights. The LECTERN button controls the light above the lectern.
To lower the screen, press the ON button near the text that says PROJECTOR POWER.
You can connect your own computer using the provided HDMI or VGA cables. To display what is on your
laptop, choose the correct button (LAPTOP VGA or LAPTOP HDMI).
A document camera can be checked out from the desk. To display the image on the document camera,
press the DOCUMENT CAMERA button.
If you have questions, contact the front desk.
Using the Lectern Controls Room 3261
For KB
The PC button displays on the projector what is on the PC to the projector.
The LAPTOP VGA button displays on the projector what is on your laptop if you are connected with the
VGA cable.
The LAPTOP HDMI button displays on the projector what is on your laptop if you are connected with the
HDMI cable.
The DOCUMENT CAMERA button displays on the projector the image from the document camera. A
document camera can be checked out from the 3rd floor desk if one is necessary.
The PICTURE MUTE button prevents an image from being sent to the projector.
The ASPECT RATIO button allows you to choose a specific aspect ratio. The default is auto, meaning it is
unlikely that you will need to use this button.
The PROJECTOR POWER ON and OFF buttons turn on/off the projector and lower/raise the screen.
Once the power is turned off,
Connecting to Displays from the Pods
The power button turns on the power
to the display
This displays the image on the
provided PC (the one closest to the
control panel)
This will display the image on a
personal computer, connected
through the VGA cable
This will display the image on a
personal computer, connected
through the HDMI cable
This will display the image from the
lectern
This turns up the volume on the local
display
This turns down the volume on the
local display
If you have questions, contact the front desk or go to
https://kb.wisc.edu/wiscel/search.php?cat=1851 for more instructions.
Download PDF