RTD-I-TX2RS-3 Ruggedized 2G/3G Mobile Network Router

R u g g e di ze d M o bi l e N e tw or k R o u te r
Characteristics
 Multi-protocol Router
 WAN network interfaces
 GPRS, EDGE, UMTS,
HSDPA
2.5/2.75/3/3.5G
 Dual SIM slots
 User interfaces
 1x Ethernet 10/100BT
 2x RS232/RS485 2/4 wires
 Digital input 0/48Vcc
 Relay output 700mA/60Vcc
Security features
 SSL V3
 VPN: GRE, OpenVPN,
IPsec, IPsec pass-through
 Firewall: NAT/PAT/filtering
Ethernet
 DHCP Server
 DynDNS
 Router: static, RIP 1
Asynchronous Conversion
 RAW TCP or UDP
 Telnet
 Modbus RTU to Modbus TCP
Management
 HTML
 CLI - Telnet, SSH
 SMS
 Remote through 2G/3G and
software
Environment
 Ruggedized design in a robust
metallic DIN rail enclosure
 Industrial operating temperature range: -25° to + 70°C
 Power input: 9 to 48 Vdc
 Antenna provided
 Antenna extension cable on
option
VERSATILE CELLULAR ROUTER
RTD-I-TX2RS is a high speed ruggedized
router that connect to 2G,/3G+ mobile
networks. It provides harsh environments with secured communications
for any industry requirements such as
telemetry, data acquisition and IP VPN
interconnections. It brings all benefits
of 2/3G+ mobile network capabilities
with bandwidth up to 7.2 Mbps.
RTD-I-TX2RS carries Ethernet and asyn-
chronous traffics but also isolated digital input and relay output.
RTD-I-TX2RS serves any industry appli-
cations for data acquisition, control,
telemetry, monitoring:
- smart grid, smart metering
- high voltage system monitoring
- gas and water pipeline supervision
- centralized heating systems
- environment protection
- intelligent traffic systems
- weather station data collection
- lighting control
- solar and wind power farms
- alert, alarm systems
And may other applications that require a
network access without copper, fiber,
dial-up or DSL connectivity .
Industry grade equipent
RTD-I-TX2RS is a ruggedized design in a
metallic DIN rail enclosure with an operation temperature range of –20 to +70 °C.
It can host two SIM cards to provide auto-
matic mobile network backup. Users can
control switching to backup network and
restoring to main network which guaranties best communication availability and
resilience.
Internet access
RTD-I-TX2RS enables high speed Internet
access through the 2/3G+ mobile network. Remote systems can be activated
by SMS. Network access can be secured
by a VPN tunnel with a keep-alive function
for always-on communication.
Page 2
V e r s i o n 1 . 1 — F é v r i e r 2 0 13
2/3G MOBILE NETWORK COMUNICATIONS
VPN and M2M
RTD-I-TX2RS enables point to point connections through a secured VPN tunnel. A device is
set as Sever and the remote unit is set as Client. A Server equipment can support several
VPN connections to a number of remote Client devices. RTD-I-TX2RS supports IPSEC, GRE
and OpenVPN protocols.
Smart Solutions for
Smart Networks
www.cxr.com
Asynchronous to IP Conversion
RTD-I-TX2RS delivers two RS232/RS485 serial ports with DB9 and RJ45 connectors. Asynchronous traffic is transferred over IP though either Telnet, RAW-TCP or RAW-UDP protocols.
RTD-I-TX2RS performs ModBus/TCP to ModBus /RTU conversion with ModBus/TCP master
polling. This function enables direct connection of Slave Modbus devices from their RS232
interfaces.
CXR Anderson Jacobson
Rue de l'Ornette
28410 Abondant - France
T +33 (0) 237 62 87 90
F +33 (0) 237 62 88 01
email: contact@cxr.com
R T D - I -T X 2 R S - 2 5 / 2 7 5 / 3 5
P ag e 3
2G / 3G CAPABILITIES
Maximum Bandwidth (*)
RTD-I-TX2RS
Mobile Network
(*) depends on network operation
SPECIFICATION - SOFTWARE
Routing
RIP
DHCP server
Static, RIP
Dynamic routing protocol
Static Address
Address exclusion
DHCP server for local interface clients
Port forwarding
LAN and WAN IP, TCP, UDP packets
DMZ support
SNMPv1,2c
NTP(RFC1305)
DynDNS
Firewall
Management protocol with GET, SET and TRAP. MIB2
NTP client for router synchronization
Dynamic DNS (DDNS) is a DNS server for dynamic IP address link to
static host names
NAT, PAT
IP address filtering
Serial / IP conversion RAW-TCP, RAW-UDP, Telnet
Modbus RTU-to-TCP gateway
Modbus to Ethernet conversion with VPN
VPN
GER, Ipsec, OpenVPN
GRE
Generic Routing Encapsulation, tunnel protocol for non-routable protocols (NetBIOS, IPX, AppleTalk…)
Keeps always-on tunnel even when no traffic
GRE Keep-Alive
IPSec pass-through
ESP Tunnels
IPsec
Enables up to 5 simultaneous secured and encrypted 5 tunnels
OpenVPN
OpenVPN with graphical interface for network interconnection
Enables Point to Point connections through the 2G/3G network
IPSec IKE failover
IPSec tunnel failover
Management
Connection trial control over 2 SIM cards / mobile networks
IPSec quality control management
Local console port, LAN, WAN
http, CLI via serial port, Telnet, SSH
Wizard
SMS Control
Software - option
Log
Configuration tool through the 2G/3G network
Router operation control through SMS messages
This software performs configuration and operation management for
a large number of routers
Log file of operation and diagnostic information
Export/Import configu- Equipment configuration Export / Import
ration
These are maximum
rates supported by the
RTD-I-TX2RS product.
Actual available bandwidth may vary on environmental conditions,
distance to base station
or mobile network congestion
Page 4
V e r s i o n 1 . 1 — F é v r i e r 2 0 13
SPECIFICATION - HARDWARE
EMC
2004/108/EC Directive
EN 301 489-1 V1.6.1(2005-09)
EN 301 489-7 V1.3.1(2005-11)
LVD
R&TTE
EN60950-1:2001
1999/05/EC Directive
ETSI EN 301 511 V9.0.2
EN 301 908-1 & EN 301 908-2(v2.2.1)
RoHS
Ethernet Interface
Directive 2002/95/EC
EU Commission 2005/618/EC, 2005/717/EC, 2005/747/EC,
2006/310/EC, 2006/690/EC, 2006/691/EC and 2006/692/EC
RJ-45 socket
Standard: IEEE 802.3
10/100Base-T
Rate: 10/100Mbps
Mode: full or half duplex
Other interfaces
1 x RS-232C / RS485 / RS422 – RJ45 (+/- 15KV ESD protection)
1 x RS-232C / RS485 / RS422 – DB9 (+/- 15KV ESD protection)
1 x Digital input (0/48VDC;1.5KV isolation)
1 x Relay output (700mA@60VDC; 1.5KV isolation)
Product Models
Mobile network capabilities
RTD-I-TX2RS-25
GPRS
Tri-band: 900/1800/1900 MHz
Smart Solutions for
Smart Networks
GPRS multi-slot class 10, mobile station class B
GPRS DL: 85.6Kbps, UL: 42.8Kbps
RTD-I-TX2RS-275
GPRS EDGE
Quad band: GSM 850/900/1800/1900 MHz
www.cxr.com
GPRS/EDGE multi-slot class 12, mobile station class B
EDGE DL: 236.8Kbps, UL: 236.8 kbps
GPRS DL: 85.6Kbps, UL: 85.6 kbps
RTD-I-TX2RS-35
GPRS EDGE UMTS HSPA
UMTS/HSDPA/HSUPA: Quad band, 850/900/1900/2100 MHz
GSM/GPRS/EDGE: Quad band, 850/900/1800/1900 MHz
GPRS/EDGE multi-slot class 12, mobile station class B
HSUPA DL: 7.2 Mbps, HSDPA: UL: 5.76 Mbps
UMTS DL: 384 Kbps, UL: 384 Kbps
EDGE DL: 236.8 Kbps, UL: 236.8 Kbps
GPRS DL: 85.6 Kbps, UL: 85.6 Kbps
Antenna connector
Operation
Light indicators
SMA, 50 Ω, antenna provided
Ethernet Link / Traffic
Power on
Mobile network connection
Signal quality
Reset
Power input
12 - 48 Vdc
Environment
Operating temperature range: -25°C to 70°C (-13°F to 158°F)
Stocking temperature range: -40°C to +75°C (-40°F to +167°F)
Hygrometry: 5% to 95% - non-condensing
CXR Anderson Jacobson
Rue de l'Ornette
28410 Abondant - France
T +33 (0) 237 62 87 90
F +33 (0) 237 62 88 01
email: contact@cxr.com
Size and Weight
Weight : 500 g
W x H x D = 50 x 135 x 104 mm
Enclosure
Robust metallic enclosure with DIN rail mounting kit
CXR Anderson Jacobson reserves its rights to modify the specifications without notice.
This document is not a contractual document
Download PDF

advertising