eBridge100RM IP and PoE/PoE+ over Coax or Extended

eBridge100RM
IP and PoE/PoE+ over Coax
or Extended Ethernet Cable Receiver
Description
Altronix eBridge100RM, a versatile dual solution Ethernet receiver/media converter, transmits
data at 100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+
compliant format. eBridge100RM is powered via a PoE midspan such as Altronix NetWay
series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the
eBridge100TM/eBridge100ST transceiver which, in turn, passes this power to an enabled IP
Camera/device. These plug and play units facilitate cost-effective solutions for IP devices
that need to be installed at distances greater than 100m. They also provide a simple way to
replace legacy analog products with new IP devices over existing coax or structured cable.
eBridge100RM
Key Features
- IEEE 802.3af (15W) and IEEE 802.3at (30W).
- Extends Network link distance in an industrial environment.
- Transmits 100Mbps up to 300m via Coax or 500m via CAT5e.
- Upgrades deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
- Eliminates the costs and labor associated with installing
new network cabling.
- UL Listed in the U.S. and Canada.
- Retrofit digital IP cameras in an analog CCTV installation.
- CE Approved.
- Auto detection and protection of legacy
non-PoE cameras/devices.
- C-Tick compliant.
- Works with Megapixel, HD720, HD1080 & VGA (SD) cameras.
- Lifetime Warranty / Made in the U.S.A.
Compatible Transceivers:
eBridge100TM
IP and PoE/PoE+ over Coax Hardened Transceiver
Transmits data at 100Mbps and provides power in a PoE/PoE+ compliant format.
UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
eBridge100TM
eBridge100ST
eBridge100ST
IP and PoE/PoE+ over Coax Hardened Mini Transceiver
Transmits data at 100Mbps and provides power in a PoE/PoE+ compliant format.
UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
Rev. eBridge100RM-03132017
eBridge100RM
IP and PoE/PoE+ over Coax
or Extended Ethernet Cable Receiver
Specifications
Input
Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Coax
Throughput rated at 100Mbps at distances up to 300m.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
Connectivity: BNC, RG-59/U or similar.
CAT5e or Higher
Throughput rated at 100Mbps at distances up to 500m.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
Connectivity: RJ45, auto crossover
Indicators (LED)
Yellow and Green LED (by RJ45 jack):
IP Link status, 10/100Base-T/active.
Green LED:
PoE ON.
Agency Listings
UL/cUL UL 60950-1
(Information Technology Equipment ).
CE European Conformity.
C-Tick compliant.
Physical and Environmental
Dimensions (W x L x H)
3.5” x 4.375” x 1” (88.9mm x 111.1mm x 25.4mm).
Weight (approx.)
Product Weight
0.25 lbs. (0.11 kg).
Shipping Weight 0.4 lbs. (0.18 kg).
Temperature
Operating
-20ºC to 49ºC (-4ºF to 120.2ºF).
Storage
-30ºC to 70ºC (-22ºF to 158ºF).
Relative Humidity
85% +/-5%.
Operating Altitude:
-304.8 to 2,000m (-1,000 to 6,561.679 ft.).
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Download PDF