HP StorageWorks DLT 80 Tape Drive - PC

QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Overview
HP StorageWorks DLT 80 Tape Drive
Introduction
The HP StorageWorks DLT 80 Tape Drive is a high-end DLT tape drive that provides up to a maximum 43.2 GB/hour
backup data transfer rate and protects departmental and enterprise servers up to a maximum of 80 GB with a single data
cartridge.
Fast, reliable 80 GB backup for departmental and enterprise servers offering advances in reliability, an improved native
transfer rate, and flexible LVDS connectivity.
Models
HP StorageWorks DLT DLT 80 Tape Drive, Internal, Worldwide (Carbon)
80 Tape Drive
DLT 80 Tape Drive, Internal, StorageWorks SBB
DLT 80 Tape Drive, External, International (Carbon)
DLT 80 Tape Drive, External, Japan (Carbon)
DLT 80 Tape Drive, 3U Rackmount, Worldwide (Carbon)
NOTE: Single drive installed in 3U Rackmount Kit.
DLT 80, Dual-Drive, 3U Rackmount, Worldwide (Carbon)
NOTE: Two drives installed in 3U Rackmount Kit.
DLT 80 Tape Array III, 5U Rackmount, Worldwide (Carbon)
NOTE: Four drives installed in 5U Rackmount Kit.
146196-B22
DS-TZ90N-VW
146197-B23
146197-293
274332-B21
274335-B21
274337-B21
Key Features
40-GB native capacity, 80 GB with 2:1 compression
6 MB/s native transfer rate, up to 12 MB/s with 2:1 compression
Internal and external models, with multiple options for rackmount configurations
Standard industry SCSI interface, SE/LVD auto sense
Support with HP Data Protector, VERITAS Backup Exec, Computer Associates ARCserve, Yosemite Tapeware, and
Dantz Retrospect Backup
Qualified behind Windows® NT® 4.0, Windows 2000, Novell NetWare, OpenVMS, HP Tru64 UNIX® , Caldera
UnixWare, Caldera OpenServer,
Caldera OpenUnix, Red Hat Linux, and SuSE Linux
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 1
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Overview
Customer Benefits
Performance 6 MB/s (native) provides the extra bandwidth needed to manage shrinking backup windows
Investment protection Backup read/write compatible with previously written DLT media
Industry Interface Fast-Wide LVD for easy connectivity to ProLiant Servers and AlphaServer Systems
Rackmount-ready models for quick installation into ProLiant and AlphaServer racks
SDLT 220 and 320 have read compatibility with media written in the DLT80 format
Family Comparison
Announce Date
Capacity (native)
SCSI Interface
Buffer
Firmware Upgradeable
Maximum Drives per
bus
MTBF
Transfer Rate
DLT 40
Transfer Rate
20 GB
Fast SE
4 MB
Yes, with LTT
2
DLT 80
2000
40 GB
Fast-Wide SE/LVD
8 MB
Yes, with LTT
2
SDLT 220
March 2001
110 GB
Ultra2, LVD
32 MB
Yes, with LTT
2
200,000 @ 80%
1.5 MB/s
250,000 @ 100%
6 MB/s
250,000 @ 100%
11 MB/s
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 2
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Product Highlights
Improved Speed and
Capacity
Performance and capacity enhancements of 6 MB/sec and 40-GB native capacity provides
customers with the extra bandwidth and capacity needed to manage ever-shrinking backup
windows without giving up the superior reliability that DLT technology has historically provided at
high duty cycles.
Tape Format
Utilizes industry-standard DLT tape format.
Compression
Built-in LZ hardware compression for improved performance (2:1 compression typical).
Compatibility and
Integration Testing
Fully tested on a variety of ProLiant Servers and AlphaServer systems from the new HP.
Rackmount Tape
Options
Supported in 3U and 5U Rackmount Kits, allowing customer to install up to 2 internal DLT or
SDLT drives in a 3U rackmount space or up to 4 internal DLT or SDLT drives in a 5U rackmount
space, respectively. Standard configuration for 3U Rackmount Kit provides two internal SCSI
buses (channels) supporting one DLT or SDLT drive per bus. Standard configuration for 5U
Rackmount Kit provides two internal SCSI buses (channels) supporting up to 2 DLT or SDLT
drives per bus. Optional cable kit permits user to extend from two to four internal SCSI buses in
5U Rackmount Kit, increasing the performance (data transfer rate) by allowing the customer to
stream data to all four drives simultaneously. Please refer to "Rackmount Tape Drive Kits"
QuickSpec for further information.
HP Data Protection
Tools
Each HP tape drive is supported with multiple software applications and utilities that allow users to
easily integrate and maintain their HP backup solutions. Software tools such as Library Tape
Tools (LTT) and Insight Manager are available via web download from the HP.com Web site.
Additional product information tools such as technology White Papers and Service Advisories can
also be accessed through the HP.com Web site.
DRTape Disaster
Recovery Utility
HP DRTape Disaster Recovery Utility is a data recovery tool which replaces the traditional
recovery methods associated with manual downloads from floppy or CD-ROM. DRTape is a
firmware driven software utility that provides a disaster recovery solution for ProLiant servers.
Embedded in the firmware of each supported tape device, DRTape uses HP tape drives to
emulate bootable drive devices, similar to floppy and CD-ROM drives. When implemented,
DRTape can provide for the complete recovery of server software and data. The recovery process
requires the use of only one tape cartridge, in conjunction with the SmartStart CD, and can
typically be completed in less than an hour.
**NOTE: DRTape does not support HP Smart Array Controllers. Please see "HP DRTape
Compatibility Matrix" at:
http://h18006.www1.hp.com/products/storageworks/drtape/compatibility.html.
HP StorageWorks
The HP StorageWorks DLT 80 Tape Drive is supported on HP's industry-leading diagnostic tool Library
HP StorageWorks Library and Tape Tools (L&TT). L&TT is a single, convenient program that's a
and Tape Tools (L&TT) snap to install and simple to operate. L&TT's intuitive user interface eliminates the need for
training and deploys in less than five minutes. This robust diagnostic tool is designed for both the
experienced professional and the untrained administrator. It ensures product integrity through selfdiagnostics and fast resolution to device concerns. Additional information on L&TT plus download
information can be found at http://www.hp.com/support/tapetools
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 3
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Compatibility
HP's extensive compatibility testing program assures that your HP StorageWorks DLT 80 tape drive works with leading
servers, operating systems, and backup applications - and not just those sold by HP. HP DLT tape drives work seamlessly
in many environments, making them especially suitable if you have a mixed system environment. For the latest list of
servers, workstations, operating systems, and backup software that support HP DLT tape drives, check the tape backup
compatibility pages on our web site at: http://www.hp.com/go/connect.
HP Server
The HP StorageWorks DLT 80 tape drives are supported on the following classes of HP systems:
Compatibility
HP ProLiant DL servers
HP ProLiant ML servers
HP AlphaServers
For details of which tape drive models work with which systems, including third-party systems, visit
http://www.hp.com/go/connect for the latest hardware compatibility information.
OS Support
Native Operating System Backup Applications:
Microsoft Windows NT 4.0 & Windows 2000
Novell NetWare
HP Tru64 UNIX
OpenVMS
Linux - Red Had, SuSE
Caldera OpenUnix, OpenServer, UnixWare
NOTE: Please visit
http://www.hp.com/products1/storage/compatibility/tapebackup/software/index.html
for the latest compatibility information.
Backup Software
Support
ISV Backup Software Platforms
VERITAS Backup Exec v8.5-9.0 for Windows NT/2000
VERITAS Backup Exec v8.5-9.0 for NetWare
Computer Associates ARCserve v2000- 9.0 for Windows NT/2000
Computer Associates ARCserveIT v6.6-7.0 for NetWare
Dantz Retrospect Backup v5.6-6.0 for Windows NT/2000 (Server & Workgroup version)
HP Data Protector 5.0
Yosemite Tapeware 7.0
NOTE: Please visit http://www.hp.com/go/connect for the latest compatibility information
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 4
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Service and Support, HP Care Pack and Warranty Information
Warranty
Warranty Upgrade
Options
HP Care Pack
Information
Software Product
Services
The warranty for this product consists of 3 years parts, 0 year labor, 0 year on-site.
Response – Upgrade on-site response from next business day to same day 4-hours
Coverage – Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hours
HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specific
duration and hours of coverage
HP Care Pack is not available for less than the product's warranty duration
HP Care Pack is available for sale anytime during the warranty period for most products, but
the commencement date will be the same as the Warranty Start Date (delivery date to end
user customer). Proof of purchase may be required
HP Care Pack services are prepaid
For additional HP Care Pack (hardware & software) information, as well as orderable part
numbers, please refer to the URL listed below:
http://h18005.www1.hp.com/services/carepaq/index.html
Stand-alone telephone support
Rights to a new license
Media and documentation updates
Hardware Product
Services
Installation services
On-site Maintenance (includes warranty support)
Response time upgrades during the warranty period
Post-warranty coverage
RAID setup and performance consulting via statement of work
For additional hardware installation and maintenance information please refer to the URLs listed
below:
http://h18005.www1.hp.com/services/carepaq/us/install/
http://h18005.www1.hp.com/services/carepaq/us/hardware/
Support Services
HP Services provides a three-year, limited warranty, fully supported by a worldwide network of
resellers and service providers and 9x5 hardware technical phone support during the warranty
period. In addition, available service offerings include a full range of optional packaged hardware
and software services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
Components
The following brick level options/components do not have individual HP Care Pack Services.
These items will be included in product HP Care Pack Services into which they are installed.
Disk Drives
Tape Drives
CD/DVD ROM
SCSI Hubs in
Adapters
SBBs
Bus Converters
Backplane RAID Power Supplies
Cabling
Fans
Controllers
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 5
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Options
Related Options
Media
HP DLT IV data cartridge (single cartridge)
HP DLT IV data cartridge (single cartridge – Europe only)
HP DLT cleaning cartridge (single cartridge)
Host Bus Adapters and NOTE: This is a list of supported controllers and adapters. Some may be
Controllers for
discontinued.
ProLiant Servers
Integrated Smart Array 5i Controller
NOTE: This controller ships standard on the HP ProLiant DL380 G2 and DL380
G3 servers.
Smart Array 5i Controller
Smart Array 5i Controller (Japan)
Smart Array 5i Plus Controller
Smart Array 5i Plus Controller (Japan)
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter
64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter
64-Bit Dual Channel Wide Ultra2 SCSI Adapter
Host Bus Adapters and 32-bit Single Channel
Controllers for Alpha 32-bit to LVD Single Channel SCSI LSI SYM 8952Uia
Servers
32-bit to LVD Single Channel SCSI LSI SYM 8952Uia
32-bit Single Channel LSI SYM 8951Uia
Comb SCSI/Ether Dual Channel
64-bit Dual Channel
Combo SCSI/Video/Ethernet
Rackmount Options
3U Rackmount Kit, Worldwide
NOTE: Please refer to web page for further information:
http://h18006.www1.hp.com/products/storageworks/3urackmount/index.html
5U Rackmount Kit, Worldwide
NOTE: Please refer to web page for further information:
http://h18006.www1.hp.com/products/storageworks/5urackmount/index.html
Alpha Rail Kit
NOTE: Rail Kit is required for installation of 5U Rackmount Kit or DLT 80 Tape
Array III into AlphaServer rack.
3U Alpha Rail Kit (6-3)
NOTE: Rail Kit is required for installation of 3U Rackmount Kit, single-drive
rackmount, or dual-drive rackmount configuration into AlphaServer rack.
3U Alpha Rail Kit (2-5-2)
NOTE: Rail Kit is required for installation of 3U Rackmount Kit, single-drive
rackmount, or dual-drive rackmount configuration into AlphaServer rack.
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
C5141F
C5141L
C5142A
N/A
226593-B21
226593-291
264030-B21
264030-291
268351-B21
154457-B21
129803-B21
348757-B21
KZPBA-CA
SN-KZPCA-AA
3X-KZPCA-AA
30-56041-01
KZPCM-DA
3X-KZPEA-DB
3X-DEPVZ-AA
274338-B21
274339-B21
254795-001
280571-001
3R-A3804-AA
Page 6
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Options
Cable Kits
LVD Cable Kit, 68-pin HD/VHDCI
NOTE: Internal and external cables.
LVD Cable Kit, 68-pin HD/68-pin HD
NOTE: Internal and external cables.
68-pin HD/VHDCI, 12 ft/3.66 m
NOTE: External Cable only.
68-pin HD/VHDCI, 16.40 ft/5 m
NOTE: External Cable only.
68-pin HD/VHDCI, 12 ft/3.66 m
NOTE: External Cable only.
168048-B21
242381-B21
341177-B21
328215-001
328215-002
Kit Contents
Model
DLT 80 Internal
Kit Contents Description
Part Number
Contains one DLT 80 tape drive, one DLT IV data cartridge, one DLT Cleaning
146196-B22
Cartridge, one internal 2-Device Ribbon Cable, Terminator, User's Guide on
CD, Warranty Card, and Native Drivers CD.
DLT 80 External (Int'l) Contains one DLT 80 tape drive enclosed in an external housing, one DLT IV
146197-B23
data cartridge, one DLT Cleaning Cartridge, one external 6 Wide to VHDCI
cable, one external 6 Wide to 68-pin HD cable, one external 3 Wide to 68-pin
HD cable, Terminator, Power Cord, User's Guide on CD, Warranty Card, and
Native Drivers on CD.
DLT 80 External
Contains one DLT 80 tape drive enclosed in an external housing, one DLT IV
146197-293
(Japan)
data cartridge, one DLT Cleaning Cartridge, one external 6 Wide to VHDCI
cable, one external 6 Wide to 68-pin HD cable, one external 3 Wide to 68-pin
HD cable, Terminator, Power Cord, User's Guide on CD, Warranty Card, and
Native Drivers on CD.
DLT 80 SBB
Contains one DLT 80 tape drive enclosed in a StorageWorks SBB Top Gun
DS-TZ90N-VW
Blue housing, one DLT IV data cartridge, one DLT Cleaning Cartridge, and
SBB User's Guide.
DLT 80, 3U Rackmount Wide SCSI LVD rack-mountable enclosure (3U) with power supply and fan, one
274332-B21
internal DLT 80 tape drive, one DLT IV data cartridge, one DLT cleaning
cartridge, Power Cord, Native Drivers on CD, User's Guide on CD, and
Documentation.
DLT 80, Dual-Drive,
Wide SCSI LVD rack-mountable enclosure (3U) with power supply and fan, two
274335-B21
3U Rackmount
internal DLT 80 tape drives, two DLT IV data cassettes, one DLT cleaning
cassette, Power Cord, Native Drivers on CD, User's Guide on CD, and
Documentation.
DLT 80 Tape Array III, Wide SCSI LVD rack-mountable enclosure (5U) with power supply and fan, four
274337-B21
5U Rackmount
DLT 80 tape drives, four DLT IV data cassettes, one DLT cleaning cassette,
two SCSI cables, Power Cord, Native Drivers on CD, User's Guide on CD, and
Documentation.
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 7
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Technical Specifications
Protocol Support
Dimensions
(H x W x D)
Fast-Wide, SE/LVD, auto sensing interface
Physical (HxWxD)
Internal
3.4 x 5.87 x 9.8 in/ 8.64 x 14.91 x 24.89 cm
External
Weight
Internal Cables
External Cables
Transfer Rates
6.48 x 6.8 x 12.62 in/16.46 x 17.27 x 32.05
cm
Rackmount (1 and 2-Drive) 5.2 x 16.8 x 23 in/13.2 x 42.7 x 58.4 cm
Rackmount (4 Drive)
8.75 x 19 x 18.125 in/22.2 x 48.26 x 46 cm
Shipping (LxWxH)
Internal
15.25 x 13.25 x 12 in/38.7 x 33.6 x 30.5 cm
External
19.6 x 17.25 x 13.25 in/49.7 x 43.8 x 33.6
cm
Rackmount (1 and 2-Drive) 15.75 x 23.75 x 33.50 in/40.005 x 60.325 x
85.09 cm
Rackmount (4 Drive)
32.25 x 15.38 x 31 in/81.92 x 39.07 x 78.74
cm
Out of box
Internal
6.4 lb (2.9 kg )
External
14 lb (6.7 kg)
Rackmount (1 Drive)
33.6 lb (15.3 kg)
Rackmount (2 Drive)
40 lb (18.2 kg)
Rackmount (4 Drive)
56.6 lb (25.7 kg)
Shipping
Internal
12 lb (5.44 kg)
External
18 lb (8.16 kg)
Rackmount (1 Drive)
53.6 lb (24.4 kg)
Rackmount (2 Drive)
60 lb (27.3 kg)
Rackmount (4 Drive)
85.6 lb (38.82 kg)
Internal Options contain: 2-Device ribbon cable with LVD/SE terminator.
External Options contain: 6 ft 68-pin HD to VHDCI External Cable, 6 ft 68-pin HD to 68-pin HD
External Cable, 3 FT 68-pin HD to 68-pin HD External Cable.
Rackmount Models Only - must be ordered separately: LVD Cable Kit, 68-pin HD/VHDCI, LVD
Cable Kit, 68-pin HD/68-pin HD, 68-pin HD/VHDCI, 12 ft, 68-pin HD/68-pin HD, 5 m, 68-pin
HD/68-pin HD, 10 m
Without Compression 6 MB/s
(maximum)
Without Compression 4.5 MB/s
(typical)
2:1 Compression Ratio 43.2 GB/hr
(maximum)
2:1 Compression Ratio 32.4 GB/hr
(typical)
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 8
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Technical Specifications
Data Access Time
Reliability
Tape Format
Input Requirements
Maximum Number of
Drives
Media
Load/Unload Time
Error Detection/
Correction
Maximum Number of
Drives
Relative Humidity
(non-condensing)
Temperature Range
Average file access
60 seconds
Average load time
37 seconds
Mean Time to Data
97 seconds
MTBF
250,000 hours @ 100% duty cycle
Head Life
30,000 Hours
Recording Method
Serpentine
Recording Format
ECMA-236, DDS3
Data Compression
Lempel-Ziv (LZ)
Error Detection/
Reed Solomon (3 Levels)
Correction
Power-Internal
28 Watts steady
typical/maximum state
Power-External
56 Watts
typical/maximum
Voltage
100 to 240 VAC
Frequency
50 to 60 Hz
Power
+5V±5%/+12V±10%
For best performance only 2 drives per bus
DLT Type IV
40 Sec/12 Sec
Reed Solomon
2 Per Server
Operating
Shipping
Operating
Shipping
20% to 80%
5% to 95%
50° to 104° F (10° to 40° C)
-32° to 150.8° F (-40° to 66° C)
DLT 80 Rackmount Models Specifications
Protocol Support
Form Factor
LED Indicators (On
Front Panel)
Cable Type (External)
External Connector
Type/Quantity
Maximum Number of
Devices/Ports
Maximum Number of
Drives
Tape Drive (Installed)
Single/Dual-Drive
Models
Wide SCSI LVD/SE
3U, Rackmount
(1) Power Supply LED
DLT 80 Tape Array III
Not Included
(Please refer to section
entitled "Related
Options")
68-pin High-Density
(HD)/2 Wide SCSI
Connectors
2 internal SCSI buses
(channels) supporting 1
drive per SCSI bus
2 Full-Height (DLT &
SDLT)
DLT 80 (1 or 2 drives
installed)
(2) 12ft. 68-pin HD-to-VHDCI
Wide SCSI LVD/SE
5U, Rackmount
(1) Power Supply LED, (1) Service Required LED
68-pin High-Density (HD)/2 Wide SCSI Connectors (Can increase to 4
connectors with Optional LVD Cable Kit)
2 internal SCSI buses with up to 2 drives per SCSI bus;
Optional LVD cable kit can increase unit to 4 internal SCSI buses with 1
drive per bus
4 Full-Height (DLT & SDLT)
DLT 80 (4 drives installed)
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 9
QuickSpecs
HP StorageWorks DLT 80 Tape Drive
Technical Specifications
Capacity
Transfer Rate
(maximum)
Up to 80 GB Native
Capacity
Up to 12 MB/s
160 GB Native Capacity
24 MB/s
© Copyright 2003 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Windows NT is a US registered trademark of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 10658 Worldwide QuickSpecs — Version 20 — 11.17.2003
Page 10
Download PDF