Mi PТZ camera for Mi Drone

Mi PТZ camera for Mi Drone
Rolling of the camera up
on 90 degrees.
Suspension for the
camera
M
I
Installation and
disassembly lock of PТZ
camera
M
O
A
I
X
Connection indicator
Camera lens
Shooting indicator
M
O
C
.I
Installing
The Device
Installing of Micro SD card
Note: selecting the memory card, guided by
major brands Class 10 (Class 10) and above, the
recommended amount of memory at least 16GB.
USB slot is designed only for technical
application.
Insert the camera suspension to the slot until it
clicks. After setting the PTZ camera installation
and dismantling lock will take its original position.
Sliding lock, remove the protective cover of mounting slot
for PTZ camera.
Note: To remove the PTZ camera, slide a lock in opposite
direction.
1
Instructions manual
M
O
Video filming and photography using the
remote control
On/Off PТZ camera
After switching quadcopter, switch on automatic start of
PTZ camera. After automatic configuration PTZ camera
switches to standby mode.
Once quadcopter is off, PTZ camera automatically
turns off.
C
.I
M
I
Motion control of camera lens (up and
down)
M
O
A
I
X
Camera button
Video button
Click once on the shooting, after two signals the camera takes the
picture.
Click once on the video, two signals after the camera starts
recording video; repeatedly click on the video, after four signals
camera will stop recording.
During filming power indicator of remote control is blinking.
Scroll left wheel on remote control to select the direction
of camera range, that is indicated in the figure on the left.
Release the left wheel, the camera lens will maintain the
current status.
XIAOMI-MI.COM
2
Download PDF