16 Channel Passive Video, Power CCTV Hub with AC

16 Channel Passive Video, Power CCTV Hub with AC Power
Supply in 1U Rack Mounting Hub
ITEM NO.:
SP-P016VPD, SP-111VP, SP-111VP3, SP-111VPC, SP-111VPD-RJ45
The 16-channel SP-P016VPD CCTV hub is using standard CAT5 & RJ45 structured building wiring to carry video, power
and data for simplifying short range installation by centralizing power and reducing installation labor costs. The built in
10AMP AC24V power supply could support at-distance camera loads up to 500mA per channel. Each port built in
switch to set the unit to power 2 pairs or 3 pairs. To use with SP-111VP3, SP-111VPC, SP-111VPD-RJ45 at camera
side to send video, power or data for cable runs 300 meters (max.)
SP-P016VPD 16 Channel Passive Video, Power, Data CCTV Hub with AC Power Supply
in 1U Rack Mounting Hub
SP-P016VPD CCTV hub Integrate and send video and power, data over a single 4 pairs CAT5 cable up to 300
meters.
Built in switch at each port to set unit for “2 pair power + 1 pair data” mode or “ 3 pairs power” mode.
Power cameras via 2 or 3 pairs UTP cable for variety distances (please refer to below power distance chart).
Use with video power transceiver SP-111VP3 (AC24V camera), SP-111VC (DC12V camera) at camera side, to
send video and power only.
Use with SP-111VPD-RJ45 video, power, data combiner at the camera side, to send video, power and data.
10 Amp AC24V power, each port output current up to 1.1Amp for camera, max up to 10Amp.
Built in “no fuse breaker” to avoid current overload.
Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
Perfect cable management solution from the camera to the wiring station, control room.
SP-111VP
SP-111VP3
Video & Power Transceiver for AC24V Camera (3 pairs)
Identical to SP-111VP, but remote power go through via “3 pairs” to instead of 2 pairs for longer range.
SP-111VPC
Video & Power Transceiver for AC24V Camera (2 pairs)
Video (one pair) and remote power (2pairs) transmission over one 4pairs CAT5 cable.
Transmission range up to 300 meters (max.)
BNC for video, power cord for power, RJ45 female output for video and power.
Eliminates costly coaxial cables and minimize installation time.
Use with SP-P016VPD for 16 channel video, power over professional CAT5 RJ45 connection.
Video & Power Transceiver for DC12V Camera
Video (one pair) and remote power (2 or 3 pairs) transmission over one 4pairs CAT5 cable.
Built in AC to DC12V regulated power converter, 1000mA max. .
Built in switch to set unit for “2 pair power through” or “3 pairs power through” mode.
For DC12V camera use, the power sources convert from SP-P016VPD AC24V power for professional CCTV
Industry Installation.
Transmission range up to 300 meters (max.)
BNC for video, power cord for power, RJ45 female output for video and power.
Eliminates costly coaxial cables and minimize installation time.
Use with SP-P016VPD for 16 channel video, power over professional CAT5 RJ45 connection.
SP-111VPD-RJ45
Video, Power, Data Transceiver
Video, low voltage camera power, Data (RS422, 485) transmission over one standard CAT 5 cable.
Male BNC with 2 mini-coax pigtail to RJ45 connector.
Built in PTC fuse for short protection.
Transmission range up to 300 meters (max.)
Use with SP-P016VPD at camera side, 16 channel video, power, data over professional CAT 5 RJ45 connection.
1
Product Overview:
SP-P016VPD
Switch setting:
3 pairs power -------------working with SP-111VP3 or SP-111VPC
2 pairs power & data-----working with SP-111VPD-RJ45
2 pairs power-------------working with SP-111VP
SP-111VP/ SP-111VP3
Front
Rear
SP-111VPJ-RJ45
Front
Rear
SP-111VPC
2
Rack Mount Installation:
Package includes the two mounting brackets and eight screws.
Place the mounting brackets unto the side of the left and right side of rack enclosure. Use two
screws to secure mounting brackets.
Installation View:
Caution: to avoid any damage, SP-P016VPD cabling is not able to connect any Ethernet or
PoE network with outside plant routing.
3
AC24V Power Distance Chart over UTP CAT5 cable:
CAT5 Cable (24AWG)
Power
Actual Voltage camera at 21V
3 Pairs/AC24V
100 mA
2 Pairs/AC24V
300 Meters
300 mA
100 Meters
225 Meters
1 Amp
30 Meters
45 Meters
300 Meters
Specification:
ITEM NO.
Video, Power, Input
RJ45 with LED indication
Data Input Port
Video Output (BNC Connector)
Power
Recommend Cable
Storage Temperature
Operation Temperature
Weight
g
Dimension
W x H x D mm
Material
SP-P016VPD
16 x RJ45 connector for 16 Port
Yellow LED on: power go though, Green LED: no function
1 Port (Terminal Block)
16 Port, 1Vp-p, 75 ohms
10AMP, AC120V/230V to AC24V
Each port output current 1.1A (Max.)
CAT 5 Cable 4 Pairs (24 AWG)
-30 ~70
-10 ~45
5700 g
482x290X44 (1U)
Metal Black
℃ ℃
℃ ℃
ITEM NO.
Video (BNC Connector)
Transmission Interface
Transmission Distance
Cable
Power
Storage Temperature
Operation Temperature
Weight
Dimension
W x H x D mm
Material
SP-111VP / SP-111VP3
1 (1V p-p, 75 Ohms)
RJ45
600M(B/W), 300M(COLOR)
Twisted Pair CAT5 (AWG24)
V
-30 ~70
-10 ~45
70 g
ITEM NO.
Video (BNC Connector)
Power
Transmission Interface
Transmission Distance
Cable
Input Power
Output Power
Output Current
Material
Storage Temperature
Operation Temperature
Weight
Dimension
W x H x D mm
Material
SP-111VPC
1 (1V p-p, 75 Ohms)
V
RJ45
600M(B/W), 300M(COLOR)
Twisted Pair CAT5 (AWG24)
AC20~28V; DC16~30V
DC12V Regulated
1000mA (MAX)
Metal
-30 ~70
-10 ~45
200 g
87x67x27
Metal
ITEM NO.
VIDEO (BNC Connector)
TRANSMISSION INTERFACE
TRANSMISSION DISTANCE
DATA Connector
CABLE
POWER
DIMENSIONS
W x H x D mm
SP-111VPD-RJ45
1 (1V p-p, 75 Ohms)
RJ45
600M(B/W), 300M(COLOR)
1
Twisted Pair CAT5 (AWG24)
V
69x25x20.5 with 25cm cable
℃ ℃
℃ ℃
69x25x22
PVC Black
℃ ℃
℃ ℃
4
Download PDF