12 Volt Cell Phone Charger
Installation Instructions for Part No. 66000
HARDWARE INCLUDED:
Qty Description
1 12 Volt Cell Phone Charger
TOOLS REQUIRED:
• Phillips Screw Driver
• 10mm Wrench
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION!
NOTE: This cell phone charger can only be powered by a 12 volt DC battery. If connected to an AC electrical
system damage to cell phone charger and your cell phone will result.
STEP 1: Connect the ring terminal from the red cable to the positive “+” battery terminal. Connect the ring
terminal from the black cable to the negative “-“ battery terminal.
STEP 2: Route cable away from any heat source to your desired location that can be conveniently reached
for charging your phone.
STEP 3: Locate the small black electrical box away from any heat source. Zip tie small black electrical box
to something secure to avoid damage.
NOTE: Since this cell phone charger is wired directly to your battery if a cell phone is plugged in your battery
will be discharging when you machine is not running. To avoid a dead battery situation always unplug cell
phone after turning off machine.
To charge Android/Windows phones: All current Android phone use the mirco USB connection that came with
this cell phone charger. Plug the male micro USB connecter directly into your phone and your cell phone should
start charging.
To charge iPhone 4 and under: A 30 pin Dock Connector to Micro USB Adapter will need to be purchased.
Plug male micro USB into dock connector then plug dock connector into your iPhone and your phone should
start charging.
To charge iPhone 5 and up: A Micro USB to Lightning Port Adapter will need to be purchased. Plug male
micro USB into dock connector then plug dock connector into your iPhone and your phone should start
charging.
LIMITED WARRANTY
POWERMADD warrants this product to be free from defects in material and workmanship under use for the purpose it was intended.
POWERMADD shall not be liable for damage or injury caused by defective materials or workmanship. POWERMADD may elect
to repair or replace this product, but is the sole judge of any defects in their product. This warranty does not cover any labor costs to
remove or reinstall this product and is effect for one year from the original purchase date.
© 2014 PowerMadd
M66000
www.powermadd.com
Download PDF