SCC-B9221
operating instructions
FRA
SPA
JAP
1-SCC_B9221_NA-ENG.indd 1
ENG
VARI-FOCAL BULLET CAMERA
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
2008-03-10 오후 2:0
safety precautions
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS
INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that dangerous voltage consisting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
WARNING
•
•
•
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
If this power supply is used at 240V ac, a suitable plug adapter should be used.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion,
fire, electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may
cause abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may
cause fire.
5. When installing the camera, fasten it securely and firmly. A falling camera may cause
personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or
containers filled with water on top of the camera.
Doing so may cause personal injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations.
Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product.
In such case, immediately disconnect the power source and contact the service
center. Continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center.
Never disassemble or modify this product in any way. (SAMSUNG is not liable for
problems caused by unauthorized modifications or attempted repair.)
10.When cleaning, do not spray water directly onto parts of the product.
Doing so may cause fire or electric shock.
1-SCC_B9221_NA-ENG.indd 2
2008-03-10 오후 2:0
CAUTION
1. Do not drop objects on the product or apply strong shock to it.
Keep away from a location subject to excessive vibration or magnetic interference.
2. Do not install in a location subject to high temperature (over 122°F), low temperature
(below 14°F), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power
and then move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning.
Neglecting to do so may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
ENG
7. Avoid aiming the camera directly towards extremely bright objects such as sun,
as this may damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at
any time.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian interference-Causing Equipment
Regulations of ICES-003.
1-SCC_B9221_NA-ENG.indd 3
2008-03-10 오후 2:0
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus.
13.Unplug this apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus
1-SCC_B9221_NA-ENG.indd 4
2008-03-10 오후 2:0
contents
02
Features
THINGS TO KEEP IN MIND
DURING INSTALLATION
AND USE
02
Things to keep in mind during installation and
use
INSTALLATION
03
03
04
04
1. Bracket & camera mounting
2. Power connect & monitor impedance
3. View angle adjustment
4. Sun-shield mounting
TROUBLESHOOTING
05
Troubleshooting
SPECIFICATIONS
06
Specifications
DIMENSIONS
07
Dimensions
02
ENG
FEATURES
02
03
1-SCC_B9221_NA-ENG.indd 1
05
06
07
contents _01
2008-03-10 오후 2:0
features
•
•
•
•
•
•
•
•
ONY 1/3” Super HAD High-resolution Color CCD
S
Resolution: 480 TVL (Color)
Externally Adjustable Focal Length & Focus by Ring
Back Light Compensation
Vari-focal Fixed Iris Lens built-in
4 ~ 9 mm/F1.5
Externally Adjustable DC Iris Level
Back Side, Top and Bottom Side Bracket Mounting
Waterproof Outdoor Installation (IP-66)
things to keep in mind during
installation and use
Do not disassemble the camera on your own.
Always be careful when handling the camera. Do not strike the camera by your
fists or shake it. Please be careful not to be careless when storing and operating it.
• Do not place or operate the camera in any wet environment such as rain or
wet surfaces.
• Do not clean the camera with rough sandpaper. Please always use a dry cloth
when cleaning it.
• Put the camera in a cool area free from direct sunlight. Otherwise, the camera
may be damaged.
•
•
02_ features
1-SCC_B9221_NA-ENG.indd 2
2008-03-10 오후 2:0
installation
1. BRACKET & CAMERA MOUNTING
-Affix the bracket to the mounting surface.
-Drill up the supplied screws on the mounting surface through the holes on the bracket.
-Fix the camera on the bracket as belows.
ENG
[Top Side Mounting]
[Bottom Side Mounting]
[Back Side Mounting]
2. POWER CONNECT & MONITOR IMPEDANCE
-Adaptor: DC12V/300mA Regulated Power Supply.
-To avoid fire or shock hazard, must use a UL listed power supply.
-Set the monitor impedance switch to 75 . Check the impedance switch when the screen turns
blurred.
SUN SHIELD
SUN SHIELD BOLT
BRACKET HOLE
VIDEO-OUT
FOCUS RING
1-SCC_B9221_NA-ENG.indd 3
ZOOM RING
BRACKET HOLE
POWER(DC12V)
(DON'T UNSCREW)
installation _03
2008-03-10 오후 2:0
3. VIEW ANGLE ADJUSTMENT
-For a wide view angle turn the ZOOM RING to wide(W), for a narrower view angle turn it to tele(T).
-After properly controlled, adjust the FOCUS RING to near(N) or far(
by a hand.
) while holding the zoom ring
4. SUN-SHIELD MOUNTING
-After adjusting view angle, cap over the camera with the sun-shield and fix it to the camera with
the sun-shield bolt.
04_ installation
1-SCC_B9221_NA-ENG.indd 4
2008-03-10 오후 2:0
troubleshooting
If you have trouble operating the camera, check the following guides for the
possible problem.
• Nothing appears on the screen.
-Check the power connection and video signal line connection.
•
The video image is not clear.
-Check if the camera glass has dust on the surface.
Clean the camera glass with a clean cloth or brush.
•
The screen is dark
-Adjust the brightness feature of the monitor.
ENG
-Make sure that the screen is not exposed directly to a bright light.
Adjust the position of the camera if necessary.
-Check if protective film of camera glass is removed.
If you cannot solve the problem with above guidelines, please contact an
authorized technician.
1-SCC_B9221_NA-ENG.indd 5
troubleshooting _05
2008-03-10 오후 2:0
specifications
ITEM
NTSC
Image Sensor
1/3" Interline transfer type color CCD (SONY)
Effective Pixels
768H × 494V (380K pixels)
Scanning System
525 Lines 2:1 Interlace
Scanning Frequency
15.734KHz (H), 59.94Hz (V)
Resolution
480 TVL
Shutter Speed
1/60~100,000 sec.
S/N Ratio
More than 48dB (AGC Off)
Sync. System
Internal
Min. Illumination
0.3 Lux(F1.5, 50 IRE)
White Balance
AWC
Video Output
VBS 1.0 Vp-p (75 Load)
Lens
4~9mm Vari-Focal, Fixed Iris Lens (F1.5)
Power Supply(*)
DC12V±10%
Power Consumption
1.7W
Operating Temp.
14˚F~122˚F (-10˚C~50˚C)
Operational Humidity
Max. 90% RH
Dimensions
44mm (Ø) × 116mm (L)
(*) Must use regulated & specified power supply.
06_ specifications
1-SCC_B9221_NA-ENG.indd 6
2008-03-10 오후 2:0
dimensions
ENG
1-SCC_B9221_NA-ENG.indd 7
Ø44.0
52.8
22.0
48.4
129.0
116.0
(unit: mm)
dimensions _07
2008-03-10 오후 2:0
1-SCC_B9221_NA-ENG.indd 8
2008-03-10 오후 2:0
Download PDF