ControlSpace® EP40-D 4-input Dante™ Endpoint

TECHNICAL DATA SHEET
ControlSpace® EP40-D
4-input Dante™ Endpoint
Product Description
The Bose® ControlSpace® EP40-D 4-input Dante endpoint is the ideal
interface for ­adding mic/line inputs to a Dante-based network audio
system. It features four balanced mic/line inputs, each with front-panel
­indicators showing channel gain/pad and phantom power status for
easy troubleshooting. The EP40-D has two network connections to allow Dante daisy-chaining. Dante daisy-chaining further simplifies system
infrastructure wiring by allowing multiple endpoints to use a single CAT5 home run connection to a network switch. Power can also be daisychained. The EP40-D is powered by either an external +24VDC supply
or any PoE network switch. Mic/line gain and +48VDC phantom power
are controllable per channel using ControlSpace Designer™ software.
Applications
Key Features
• Hotel ballrooms
• Integrated discovery, routing, configuration and control using
­ControlSpace Designer™ software
• Conference/meeting centers
• Four balanced mic/line inputs using 3-pin Euroblock ­connectors
• Eight mic/line gain settings to accommodate any analog input level –
gain is individually adjustable per channel via ControlSpace Designer
software
• 802.3af compliant PoE powered to work with any compliant PoE
­network switch, or an external +24VDC supply
• Conference rooms
• Sports facilities
• Convention centers
• Religious and worship facilities
• Retrofit applications using existing
networking cables
• +48VDC Phantom power – software switchable per channel
• ID indicator allows easy identification of which EP40-D is
­communicating with ControlSpace Designer software
• Dante daisy-chaining allows multiple EP40-Ds to be connected over a
single home-run to the Ethernet switch
Technical Specifications
Audio Inputs
Input Channels
Four (4) analog, balanced microphone/line level
Connectors
Four (4) 3.81 mm Euroblock connector, 3-pin
Phantom Power
+48VDC, software selectable per input
Gain Settings
-12 / 0 / +3 / +15 / +18 / +30 / +33 / +45 dB, software selectable
Input Impedance
> 1.8 kΩ at any gain setting
Equivalent Input Noise
–115 dBu (+45 dB gain)
Maximum Input Level
+20 dBu (using -12 dB gain setting)
Software Application
ControlSpace® Designer™ software v4.2 or later
General
Digital Conversion
48 kHz / 24-bit
System THD
< 0.01 % at any gain setting, input signal 3 dB below maximum
Frequency Response
20 Hz – 20 kHz, ±1 dB
PoE Class
Class 0 802.3af PoE PD compliant
Certifications
FCC Part 15 Class B, CE (EN 55022 Class A), IEC 60950
Dimensions
1.50" H x 8.32" W x 4.74" D (38 mm x 211 mm x 120 mm)
Operating Temperature
32 °F – 104 °F (0 °C – 40 °C)
Product Code
738676-0010
1
OF 2
pro.Bose.com
Connector Panel
POWER/ID indicator: Indicates power when on
and blinks when the Identify button is pressed in
ControlSpace Designer™ software
Gain and phantom power status indicators:
Shows the gain/pad (-12 dB) setting and phantom
power status for each of the four input channels
Mic/Line inputs (4):
POWER LINK IN/OUT:
Allows daisy-chaining DC
power between multiple units
• Balanced microphone/line-level inputs
• Available gains of 0dB, +15dB, +30dB and +45dB
(without pad); and –12dB, +3dB, +18dB and +33dB
(with pad); software selectable.
TECHNICAL DATA SHEET
ControlSpace® EP40-D
4-input Dante™ Endpoint
+24VDC input: +24VDC @ 500mA, centerpositive polarity (External supply not required
if used with a PoE Ethernet switch)
• +48VDC phantom power, software selectable
Dante™ / PoE network connector:
100 Mbps Dante Ethernet RJ-45 network connections
• PoE + DATA connects to an Ethernet switch (PoE or nonPoE) and also provides the input for daisy-chaining units
• DATA provides the output to daisy-chained units
ControlSpace Designer™ software interface
Dante™ is a trademark of Audinate Pty Ltd.
2
OF 2
pro.Bose.com
Download PDF