quick start guide - Seneca Customer Care and Support

This guide provides step-by-step instructions
for a quick setup of your notebook computer.
QUICK START GUIDE
1
2
Install the Battery Pack
Install the battery pack if it has not been installed in your computer.
• Carefully place the computer upside down.
• Make sure that the battery security lock is in the unlock (
) position.
• Fit the battery pack into its compartment and slide the security lock to the
lock ( ) position.
Connect AC Power
The first time you use your computer,
use the AC adapter. This will allow the
battery pack to fully charge.
• Plug the DC cord of the AC adapter
to the power connector on the
computer.
• Plug the female end of the AC power
cord into the AC adapter and the
male end into an electrical outlet.
1
2
3
Power Up
• Open the top cover by lifting up the cover.
• Press the power button to power
up. An operating system such as
Windows® should start.
The Battery Charge Indicator (
) on
the computer glows red to indicate that
charging is in progress and lights green
when the battery is fully charged.
NOTEBOOK FEATURES
DVI Port
Modem (RJ-11)
Connector
Congratulations and thank you for purchasing
this notebook computer.
Camera
Power
Button
LCD
(optional)
Microphone
(optional)
(optional)
Quick Buttons
34mm
ExpressCard®
Slot
USB 2.0 Port
Internet
Wireless Radio
On/Off
Volume Down
USB 2.0
Port
Volume Up
AC Power
Connector
Mute
Keyboard
USB 2.0
Port
Touchpad
Battery
Network
Connector
Device Indicators
®
Audio Output
Connector
SATA Optical
Disk Drive
Bluetooth
(optional)
Fingerprint Reader
(optional)
Wireless LAN Activity
Number Lock
Caps Lock
Microphone
Connector
USB 2.0 Port
HDD Activity
Sleep/Hibernate Mode
AC Power/Battery Charge
P/N: I48472
Download PDF