x510 Datasheet - CORE Telecom Systems

Switches
PRODUCT INFORMATION
x510 Series
Stackable Gigabit Switches
The Allied Telesis x510 Series of stackable Gigabit switches includes a full
range of security and resiliency features, coupled with easy management,
making them the ideal choice for network access applications.
Allied Telesis x510 Series switches are
a high-performing and feature-rich
choice for today’s networks. They
offer a versatile solution for enterprise
applications. With a choice of 24and 48-port models with 10Gigabit
uplink ports, plus the
power of Allied Telesis
Virtual Chassis Stacking
(VCStack™), the x510
Series can connect anything from a small
workgroup to a large business.
Easy management
The x510 Series runs the advanced
AlliedWare Plus™ fully featured
operating system, delivering a rich
feature set and an industry-standard CLI.
The CLI reduces training requirements
and is consistent across all AlliedWare
Plus devices, simplifying network
management.
Network resiliency
The convergence of network services in
the enterprise has led to increasing
demand for highly available networks
with minimal downtime. VCStack,
in conjunction with link aggregation,
provides a network with no single
point of failure and an easy solution for
resiliency in access applications. The
addition of Ethernet
Protection Switched
Ring (EPSRing™) resilient
ring protocol ensures
distributed network segments have
high-speed, resilient access to online
resources and applications.
The x510 Series can form a VCStack of
up to four units for enhanced resiliency
and simplified device management. Full
EPSRing support and VCStack LD (Long
Distance), which enables stacks to be
created over long distance fiber links,
make the x510 Series the perfect choice
for distributed environments.
Reliable
The x510 Series was designed with
reliability in mind, and guarantees
continual delivery of essential services.
With dual built-in power supplies and
near-hitless online stack reconfiguration,
reconfiguration and maintenance may
be performed without affecting network
uptime. Dual internal PSUs eliminate the
need for an external Redundant Power
Supply (RPS), which occupies valuable
rack space. The x510 Series also features
front-to-back cooling, making it ideal for
data center applications.
Secure
Advanced security features protect
the network from the edge to the
core. Unprecedented control over user
access is provided with Network Access
Control (NAC), mitigating threats to
network infrastructure. This ensures
the network is accessed only by known
users and devices — all users’ adherence
to network security policies is checked,
and then either access is granted or
remediation is offered. Secure access
can also be provided for guests.
A secure network environment is
guaranteed. The x510 Series offers
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
New Features
»» Energy Efficient Ethernet (EEE)
»» Find me
»» DHCPv6
»» PIM-SMv6
»» VRRPv3
»» MLDv2
»» OSPFv3 authentication
powerful control over network traffic
types, secure management options, loop
guard to protect against cabling mistakes,
and tri-authentication for comprehensive
access control.
Future-proof
The x510 Series ensures a futureproof network, with superior flexibility
coupled with the ability to stack
multiple units. All x510 Series models
feature 10 Gigabit uplinks ports and
a comprehensive IPv6 feature set,
to ensure they are ready for future
network traffic demands.
Environmentally friendly
The x510 Series supports Energy
Efficient Ethernet (EEE),
automatically reducing the
power consumed by the
switch whenever there is no traffic on
a port. This sophisticated feature can
significantly reduce operating costs by
reducing the power requirements of
the switch and any associated cooling
equipment.
www.coretelecom.net
x510 Series | Stackable Gigabit Switches
Key Features
VCStack ( Virtual Chassis Stacking)
»» Create a Virtual Chassis Stack (VCStack) of up to four
units with 40Gbps of stacking bandwidth to each unit.
VCStack provides a highly available system where
network resources are spread out across stacked
units, reducing the impact if one of the units fails.
Aggregating switch ports on different units across the
stack provides excellent network resiliency.
EPSRing (Ethernet Protection Switched Ring)
»» EPSRing and 10 Gigabit Ethernet allow several x510
switches to form a high-speed protected ring capable
of recovery within as little as 50ms. This feature is
perfect for high performance and high availability in
enterprise networks.
»» Super-Loop Protection (SLP) enables a link between
two EPSR nodes to be in separate EPSR domains,
improving redundancy and network fault resiliency.
capability to connect devices requiring more power
(up to 30 Watts) such as, tilt and zoom security
cameras.
Link Layer Discovery Protocol – Media
Endpoint Discovery (LLDP – MED)
»» LLDP-MED extends LLDP basic network endpoint
discovery and management functions. LLDP-MED
allows for media endpoint-specific messages,
providing detailed information on power requirements,
network policy, location discovery (for emergency call
services) and inventory.
Voice VLAN
»» Voice VLAN automatically separates voice and data
traffic into two different VLANs. This automatic
separation places delay-sensitive traffic into a voicededicated VLAN, which simplifies QoS configurations.
Industry-leading Quality of Service (QoS)
Multicast Support
»» Comprehensive low-latency wire speed QoS provides
flow-based traffic management with full classification,
prioritization, traffic shaping and min/max bandwidth
profiles. Boosted network performance and
guaranteed delivery of business-critical Ethernet
services and applications are provided. Time-critical
services such as voice and video take precedence
over non-essential services such as file downloads,
maintaining responsiveness of Enterprise applications.
»» Multicast support ensures streaming video traffic
is efficiently managed and forwarded in today’s
converged networks.
Loop Protection
»»Thrash limiting, also known as rapid MAC movement,
detects and resolves network loops. It is highly
user-configurable — from the rate of looping traffic
to the type of action the switch should take when it
detects a loop.
»» With thrash limiting, the switch only detects a loop
when a storm has occurred, which can potentially
cause disruption to the network. To avoid this, loop
detection works in conjunction with thrash limiting
to send special Loop Detection Frame (LDF) packets
that the switch listens for. If a port receives an LDF
packet, you can choose to disable the port, disable
the link, or send an SNMP trap. This feature can
help to detect loops before a network storm occurs,
avoiding the risk and inconvenience of traffic
disruption.
Power over Ethernet Plus (PoE+)
»» With PoE, a separate power connection to media
endpoints such as IP phones and wireless access
points is not necessary. PoE+ reduces costs and
provides even greater flexibility, providing the
2 | x510 Series
Open Shortest Path First (OSPFv3)
»» OSPF is a scalable and adaptive routing protocol for
IP networks. The addition of OSPFv3 adds support
for IPv6 and further strengthens the Allied Telesis
focus on next generation networking.
sFlow
»» sFlow is an industry-standard technology for
monitoring high-speed switched networks. It provides
complete visibility into network use, enabling
performance optimization, usage accounting/billing,
and defense against security threats. Sampled
packets sent to a collector ensure it always has a
real-time view of network traffic.
Dynamic Host Configuration Protocol (DHCP)
Snooping
»» DHCP servers allocate IP addresses to clients, and
the switch keeps a record of addresses issued on
each port. IP source guard checks against this DHCP
snooping database to ensure only clients with specific
IP and/or MAC address can access the network.
DHCP snooping can be combined with other features,
like dynamic ARP inspection, to increase security in
Layer 2 switched environments, and also provides
a traceable history, which meets the growing legal
requirements placed on service providers.
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
Network Access Control (NAC)
»» NAC allows for unprecedented control over user
access to the network, in order to mitigate threats to
network infrastructure. Allied Telesis x510 switches
use IEEE 802.1x port-based authentication in
partnership with standards-compliant dynamic VLAN
assignment, to assess a user’s adherence to network
security policies, and either grant access or offer
remediation.
»» If multiple users share a port, then multiauthentication can be used. Different users on the
same port can be assigned into different VLANs,
and so given different levels of network access.
Additionally, a guest VLAN may be configured to
provide a catch-all for users who aren’t authenticated.
Tri-authentication
»» Authentication options on the x510 Series also
include alternatives to IEEE 802.1x port-based
authentication, such as web authentication to enable
guest access and MAC authentication for endpoints
that do not have an IEEE 802.1x supplicant. All three
authentication methods—IEEE 802.1x, MAC-based
and Web-based—can be enabled simultaneously on
the same port for tri-authentication.
Premium Software License
»» By default, the x510 Series offers a comprehensive
Layer 2+ feature set that includes static Layer
3 routing and IPv6 management features. The
feature set can easily be elevated to full Layer 3 by
applying the premium software license. This adds
dynamic routing protocols and Layer 3 multicasting
capabilities.
Dynamic Host Configuration Protocol
(DHCPv6)
»» DHCPv6 is used to dynamically assign IPv6
addresses to hosts from a central location. Acting as
DHCPv6 client enables the switch to receive an IPv6
address, and acting as server enables the switch to
dynamically allocate IPv6 addresses to hosts. The
DHCPv6 server and client both support the prefix
delegation feature, which allocates a whole IPv6
subnet to a DHCP client. The client, in turn, can
allocate addresses from this subnet to the hosts that
are connected to it.
Find Me
»» In busy server rooms, comprised of a large number
of equipment racks, it can be quite a job finding the
correct switch quickly among many similar units. The
“find me” feature is a simple visual way to quickly
identify the desired physical switch for maintenance
or other purposes, by causing its LEDs to flash in a
specified pattern.
www.coretelecom.net
x510 Series | Stackable Gigabit Switches
Key Solutions
Internet
x5
Remote
VPN
10
P
-G
X
x5
er
ut
Ro
10
P
-G
X
2
11
x8
SB
x5
10
X
P
-G
08
x9
SB
10
x5
TX
-G
Server
Farm
Network
Attached
Sorage
TX
-G
10
x5
10 Gigabit link
1 Gigabit link
10/100 link
Link aggregation
Peace of mind at the network edge
Allied Telesis x510 Series switches make the ideal choice at
the network edge where security, resiliency and flexibility
are required. In the above diagram, security is enforced
using Network Access Control (NAC) combined with triauthentication to prevent unauthorized users and devices from
connecting to the network. Link aggregations are used to provide
both resiliency back to the core switches and an increase in
available bandwidth over a single link. Flexibility is ensured with
the range of interface types and PoE options available on the
x510 Series and the ability to stack the switches if required.
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
www.coretelecom.net
x510 Series | 3
x510 Series | Stackable Gigabit Switches
Specifications
10/100/1000T (RJ-45)
copper ports
100/1000x
SFP ports
1/10 gigabit
sfp+ ports
10 gigabit
stacking ports
Max PoE+ ports
Switching
Fabric
Forwarding Rate
AT-x510-28GTX
24
-
2
2**
-
128Gbps
95.2Mpps
AT-x510-28GPX
24
-
2
2**
24
128Gbps
95.2Mpps
AT-x510-28GSX*
-
24
2
2**
-
128Gbps
95.2Mpps
AT-x510-52GTX
48
-
2
2**
-
176Gbps
130.9Mpps
AT-x510-52GPX
48
-
2
2**
48
176Gbps
130.9Mpps
PRODUCT
*GSX model will be available in the near future
** Stacking ports can be configured as additional 10G Ethernet ports when unit is not stacked
Performance
General Routing
Resiliency Features
»»40Gbps of stacking bandwidth
»» Supports 13KB jumbo frames
»» Wirespeed multicasting
»»4094 configurable VLANs
»» Up to 16K MAC addresses
»» Up to 2K IPv4 routes or up to 1K IPv6 routes
»» 512MB DDR SDRAM, 64MB flash memory
»» Packet buffer memory:AT-x510-28 - 2MB
AT-x510-52 - 4MB
»» Black hole routing
»» Directed broadcast forwarding
»» DNS relay
»» Equal Cost Multi Path (ECMP) routing
»» Policy-based routing
»» Route redistribution (OSPF, RIP)
»» UDP broadcast helper (IP helper)
Reliability
»» 6to4 tunneling
»» DHCPv6 relay
»» DNSv6
»» IPv4 and IPv6 dual stack
»» Device management over IPv6 networks with
SNMPv6, Telnetv6 and SSHv6
»» NTPv6
»» Stacking ports can be configured as 10G Ethernet ports
»» Control Plane Prioritization (CPP) ensures the CPU
always has sufficient bandwidth to process network
control traffic
»» Dynamic link failover (host attach)
»» EPSRing (Ethernet Protection Switched Rings) with
SuperLoop Protection (SLP)
»» EPSR enhanced recovery
»» Long-Distance stacking (LD-VCStack)
»» Loop protection mechanisms: loop detection and
thrash limiting
»» PVST+ compatibility mode
»» STP root guard
»» VCStack fast failover minimizes network disruption
»» Modular AlliedWare Plus operating system
»» Internal redundant Power Supply Units (PSUs) load
share, providing uninterrupted power and extra
reliability
»» Full environmental monitoring of PSUs, fans,
temperature and internal voltages. SNMP traps alert
network managers in case of any failure
Power Characteristics
»» AC voltage: 90 to 260V (auto-ranging)
»» Frequency: 47 to 63Hz
Expandability
»» Stack up to four units in a VCStack
»» Premium license option for additional features
(available in a future release)
Flexibility and Compatibility
»» SFP ports on AT-x510-28GSX switch support any
combination of 10/100/1000T, 100FX, 100BX,
1000SX, 1000LX, 1000ZX or 1000ZX CWDM SFPs
»» SFP+ ports will support any combination of 1000X,
1000SX, 1000LX, 1000ZX, 1000ZX CWDM SFPs or
10G-SR, 10G-LR SFP+ modules
»» Stacking ports can be configured as 10G Ethernet
ports
»» Port speed and duplex configuration can be set
manually or by auto-negotiation
Diagnostic Tools
»» Built-In Self Test (BIST)
»» Find-me device locator
»» Optical Digital Diagnostic Monitoring (DDM)
»» Ping polling for IPv4 and IPv6
»» Port mirroring
»»TraceRoute for IPv4 and IPv6
4 | x510 Series
IPv6 Features
Management
»» Front panel 7-segment LED provides at-a-glance
status and fault information
»» Console management port on the front panel for ease
of access
»» Eco-friendly mode allows ports and LEDs to be
disabled to save power
»» Web-based Graphical User Interface (GUI)
»» Industry-standard CLI with context-sensitive help
»» Powerful CLI scripting engine
»» Comprehensive SNMP MIB support for standardsbased device management
»» Built-in text editor
»» Event-based triggers allow user-defined scripts to be
executed upon selected system events
»» USB interface allows software release files,
configurations and other files to be stored for backup
and distribution to other devices
Quality of Service
Environmental Specifications
»» Limit bandwidth per port or per traffic class down to
64kbps
»» Wirespeed traffic classification with low latency
essential for VoIP and real-time streaming media
applications
»» Policy-based QoS based on VLAN, Port, MAC and
general packet classifiers
»» Policy-based storm protection
»» Extensive remarking capabilities
»»Taildrop for queue congestion control
»» Strict priority, weighted round robin or mixed
scheduling
Core Telecom Systems partnered with Allied Telesis
Security Features
»» Access Control Lists (ACLs)
»» Configurable auth-fail and guest VLANs
»» Authentication, Authorisation and Accounting (AAA)
»» BPDU protection
»» DHCP snooping, IP source guard and Dynamic ARP
Inspection (DAI)
»» DoS attack blocking and virus throttling
»» Dynamic VLAN assignment
»» MAC address filtering and MAC address lock-down
»» Network Access and Control (NAC) features manage
endpoint security
»» Port-based learn limits (intrusion detection)
»» Private VLANs provide security and port isolation for
multiple customers using the same VLAN
»» Secure Copy (SCP)
»» Strong password security and encryption
»»Tri-authentication: MAC-based, web-based and IEEE
802.1x
(888) 375-8826
»» Operating temperature range:
0°C to 45°C (32°F to 113°F)
Derated by 1°C per 305 meters (1,000 ft)
»» Storage temperature range:
-25°C to 70°C (-13°F to 158°F)
»» Operating relative humidity range:
5% to 90% non-condensing
»» Storage relative humidity range:
5% to 95% non-condensing
»» Operating altitude:
3,048 meters maximum (10,000 ft)
www.coretelecom.net
x510 Series | Stackable Gigabit Switches
Electrical Approvals and Compliances
Safety
»» EMC: EN55022 class A, FCC class A, VCCI class
A, ICES-003 class A
»» Immunity: EN55024, EN61000-3-levels 2
(Harmonics), and 3 (Flicker) – AC models only
»» Standards: UL60950-1, CAN/CSA-C22.2 No.
60950-1-03, EN60950-1, EN60825-1, AS/NZS
60950.1
»» Certification: UL, cUL, TUV
Restrictions on Hazardous Substances (RoHS)
Compliance
»» EU RoHS compliant
»» China RoHS compliant
Country of Origin
»» Singapore
Physical Specifications
Product
Weight
Width
Depth
Height
Mounting
AT-x510-28GTX
440 mm (17.32 in)
325 mm (12.80 in)
44 mm (1.73 in)
Rack-mount
AT-x510-28GPX
440 mm (17.32 in)
400 mm (15.75 in)
44 mm (1.73 in)
Rack-mount
5.8 kg (12.79 lb)
7.8 kg (17.20 lb)
AT-x510-28GSX*
440 mm (17.32 in)
325 mm (12.80 in)
44 mm (1.73 in)
Rack-mount
4.8 kg (10.58 lb)
6.8 kg (14.99 lb)
AT-x510-52GTX
440 mm (17.32 in)
325 mm (12.80 in)
44 mm (1.73 in)
Rack-mount
5.2 kg (11.47 lb)
7.2 kg (15.88 lb)
AT-x510-52GPX
440 mm (17.32 in)
400 mm (15.75 in)
44 mm (1.73 in)
Rack-mount
6.2 kg (13.67 lb)
8.2 kg (18.08 lb)
Unpackaged
Packaged
4.3 kg (9.48 lb)
6.3 kg (13.89 lb)
*GSX model will be available in the near future
Power and Noise Characteristics
no PoE load
Product
max power
consumption
max heat
dissipation
full PoE+ load
noise
max power
consumption
max heat
dissipation
noise
MAX Poe
POwer
MAX 15.4W
Poe PORTs
MAX 30W
Poe+ PORTs
AT-x510-28GTX
52W
180 BTU/h
45 dBA
-
-
-
-
-
-
AT-x510-28GPX
67W
230 BTU/h
45 dBA
530W
1800 BTU/h
55 dBA
370W
24
12
AT-x510-28GSX*
74W
252 BTU/h
45 dBA
-
-
-
-
-
-
AT-x510-52GTX
86W
290 BTU/h
45 dBA
-
-
-
-
-
-
AT-x510-52GPX
93W
320 BTU/h
45 dBA
550W
1900 BTU/h
55 dBA
370W
24
12
*GSX model will be available in the near future
Noise: tested to ISO7779; front bystander position
Latency (microseconds)
port speed
Product
10mbps
100mbps
1gbps
AT-x510-28GTX
117µs
14.4µs
4.4µs
10gbps
3.1µs
AT-x510-52GTX
119µs
16.8µs
6.7µs
4.9µs
AT-x510-28GPX
117µs
14.4µs
4.4µs
3.1µs
AT-x510-52GPX
119µs
16.8µs
6.7µs
4.9µs
Standards and Protocols
AlliedWare Plus Operating System
Version 5.4.3 - 1.4
Authentication
RFC 1321 MD5 Message-Digest algorithm
RFC 1828 IP authentication using keyed MD5
Encryption
FIPS 180-1 Secure Hash standard (SHA-1)
FIPS 186
Digital signature standard (RSA)
FIPS 46-3 Data Encryption Standard (DES and 3DES)
Ethernet
IEEE 802.1AXLink aggregation (static and LACP)
IEEE 802.2 Logical Link Control (LLC)
IEEE 802.3 Ethernet
IEEE 802.3ab1000BASE-T
IEEE 802.3adStatic and dynamic link aggregation
IEEE 802.3ae10 Gigabit Ethernet
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet plus (PoE+)
IEEE 802.3azEnergy Efficient Ethernet (EEE)
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow control – full-duplex operation
IEEE 802.3z 1000BASE-X
General Routing
RFC 768 User Datagram Protocol (UDP)
RFC 791 Internet Protocol (IP)
RFC 792 Internet Control Message Protocol (ICMP)
RFC 793 Transmission Control Protocol (TCP)
RFC 826 Address Resolution Protocol (ARP)
RFC 894 Standard for the transmission of IP datagrams over Ethernet networks
RFC 919 Broadcasting Internet datagrams
RFC 922 Broadcasting Internet datagrams in the
presence of subnets
RFC 932 Subnetwork addressing scheme
RFC 950 Internet standard subnetting procedure
RFC 951 Bootstrap Protocol (BootP)
RFC 1027 Proxy ARP
RFC 1035 DNS client
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
RFC 1042 Standard for the transmission of IP datagrams over IEEE 802 networks
RFC 1071 Computing the Internet checksum
RFC 1122 Internet host requirements
RFC 1191 Path MTU discovery
RFC 1256 ICMP router discovery messages
RFC 1518 An architecture for IP address allocation with CIDR
RFC 1519 Classless Inter-Domain Routing (CIDR)
RFC 1542 Clarifications and extensions for BootP
RFC 1591 Domain Name System (DNS)
RFC 1812 Requirements for IPv4 routers
RFC 1918 IP addressing
RFC 2581 TCP congestion control
IPv6 Features
RFC 1981 Path MTU discovery for IPv6
RFC 2460 IPv6 specification
RFC 2464 Transmission of IPv6 packets over Ethernet networks
RFC 3056 Connection of IPv6 domains via IPv4 clouds
RFC 3484 Default address selection for IPv6
www.coretelecom.net
x510 Series | 5
x510 Series | Stackable Gigabit Switches
RFC 3596 DNS extensions to support IPv6
RFC 4007 IPv6 scoped address architecture
RFC 4193 Unique local IPv6 unicast addresses
RFC 4291 IPv6 addressing architecture
RFC 4443 Internet Control Message Protocol (ICMPv6)
RFC 4861 Neighbor discovery for IPv6
RFC 4862 IPv6 Stateless Address Auto-Configuration (SLAAC)
RFC 5014 IPv6 socket API for source address selection
RFC 5095 Deprecation of type 0 routing headers in IPv6
RFC 5175 IPv6 Router Advertisement (RA) flags option
RFC 6105 IPv6 Router Advertisement (RA) guard
Management
AT Enterprise MIB
SNMPv1, v2c and v3
IEEE 802.1ABLink Layer Discovery Protocol (LLDP)
RFC 1155 Structure and identification of management information for TCP/IP-based Internets
RFC 1157 Simple Network Management Protocol (SNMP)
RFC 1212 Concise MIB definitions
RFC 1213 MIB for network management of TCP/IP-based Internets: MIB-II
RFC 1215 Convention for defining traps for use with the SNMP
RFC 1227 SNMP MUX protocol and MIB
RFC 1239 Standard MIB
RFC 1724 RIPv2 MIB extension
RFC 2011 SNMPv2 MIB for IP using SMIv2
RFC 2012 SNMPv2 MIB for TCP using SMIv2
RFC 2013 SNMPv2 MIB for UDP using SMIv2
RFC 2096 IP forwarding table MIB
RFC 2578 Structure of Management Information v2 (SMIv2)
RFC 2579 Textual conventions for SMIv2
RFC 2580 Conformance statements for SMIv2
RFC 2674 Definitions of managed objects for bridges with traffic classes, multicast filtering and VLAN extensions
RFC 2741 Agent extensibility (AgentX) protocol
RFC 2787 Definitions of managed objects for VRRP
RFC 2819 RMON MIB (groups 1,2,3 and 9)
RFC 2863 Interfaces group MIB
RFC 3164 Syslog protocol
RFC 3176 sFlow: a method for monitoring traffic in switched and routed networks
RFC 3411 An architecture for describing SNMP
management frameworks
RFC 3412 Message processing and dispatching for the SNMP
RFC 3413 SNMP applications
RFC 3414 User-based Security Model (USM) for SNMPv3
RFC 3415 View-based Access Control Model (VACM) for SNMP
RFC 3416 Version 2 of the protocol operations for the SNMP
RFC 3417 Transport mappings for the SNMP
RFC 3418 MIB for SNMP
RFC 3621 Power over Ethernet (PoE) MIB
RFC 3635 Definitions of managed objects for the Ethernet-
like interface types
RFC 3636 IEEE 802.3 MAU MIB
RFC 4188 Definitions of managed objects for bridges
RFC 4318 Definitions of managed objects for bridges with RSTP
RFC 4560 Definitions of managed objects for remote ping, traceroute and lookup operations
RFC 6527 Definitions of managed objects for VRRPv3
6 | x510 Series
Multicast Support
Bootstrap Router (BSR) mechanism for PIM-SM
IGMP query solicitation
IGMP snooping
IGMP/MLD multicast forwarding (IGMP/MLD proxy)
MLD snooping (v1 and v2)
PIM for IPv6
RFC 2236 Internet Group Management Protocol v2 (IGMPv2)
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 3376 IGMPv3
RFC 3810 Multicast Listener Discovery v2 (MLDv2) for IPv6
RFC 3973 PIM Dense Mode (DM)
RFC 4541 IGMP and MLD snooping switches
RFC 4601 Protocol Independent Multicast - Sparse Mode (PIM-SM): protocol specification (revised)
RFC 4604 Using IGMPv3 and MLDv2 for source-specific multicast
RFC 4607 Source-specific multicast for IP
Open Shortest Path First (OSPF)
OSPF link-local signaling
OSPF MD5 authentication
OSPF restart signaling
Out-of-band LSDB resync
RFC 1245 OSPF protocol analysis
RFC 1246 Experience with the OSPF protocol
RFC 1370 Applicability statement for OSPF
RFC 1765 OSPF database overflow
RFC 2328 OSPFv2
RFC 2370 OSPF opaque LSA option
RFC 2740 OSPFv3 for IPv6
RFC 3101 OSPF Not-So-Stubby Area (NSSA) option
RFC 3509 Alternative implementations of OSPF area border routers
RFC 3623 Graceful OSPF restart
RFC 3630 Traffic engineering extensions to OSPF
RFC 4552 Authentication/confidentiality for OSPFv3
RFC 5329 Traffic engineering extensions to OSPFv3
Quality of Service (QoS)
IEEE 802.1p Priority tagging
RFC 2211 Specification of the controlled-load network element service
RFC 2474 DiffServ precedence for eight queues/port
RFC 2475 DiffServ architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2697 A single-rate three-color marker
RFC 2698 A two-rate three-color marker
RFC 3246 DiffServ Expedited Forwarding (EF)
Resiliency Features
IEEE 802.1D MAC bridges
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
RFC 5798 Virtual Router Redundancy Protocol version 3 (VRRPv3) for IPv4 and IPv6
Security Features
SSH remote login
SSLv2 and SSLv3
TACACS+ accounting and authentication
IEEE 802.1X authentication protocols (TLS, TTLS, PEAP and MD5)
IEEE 802.1X multi-supplicant authentication
IEEE 802.1X port-based network access control
RFC 2246 TLS protocol v1.0
RFC 2865 RADIUS
RFC 2866 RADIUS accounting
RFC 2868 RADIUS attributes for tunnel protocol support
RFC 3546 Transport Layer Security (TLS) extensions
RFC 3579 RADIUS support for Extensible Authentication Protocol (EAP)
RFC 3580 IEEE 802.1x RADIUS usage guidelines
RFC 3748 PPP Extensible Authentication Protocol (EAP)
RFC 4251 Secure Shell (SSHv2) protocol architecture
RFC 4252 Secure Shell (SSHv2) authentication protocol
RFC 4253 Secure Shell (SSHv2) transport layer protocol
RFC 4254 Secure Shell (SSHv2) connection protocol
Services
RFC 854 Telnet protocol specification
RFC 855 Telnet option specifications
RFC 857 Telnet echo option
RFC 858 Telnet suppress go ahead option
RFC 1091 Telnet terminal-type option
RFC 1350 Trivial File Transfer Protocol (TFTP)
RFC 1985 SMTP service extension
RFC 2049 MIME
RFC 2131 DHCPv4 (server, relay and client)
RFC 2132 DHCP options and BootP vendor extensions
RFC 2554 SMTP service extension for authentication
RFC 2616 Hypertext Transfer Protocol - HTTP/1.1
RFC 2821 Simple Mail Transfer Protocol (SMTP)
RFC 2822 Internet message format
RFC 3046 DHCP relay agent information option (DHCP option 82)
RFC 3315 DHCPv6 (server, relay and client)
RFC 3633 IPv6 prefix options for DHCPv6
RFC 3646 DNS configuration options for DHCPv6
RFC 3993 Subscriber-ID suboption for DHCP relay agent option
RFC 4330 Simple Network Time Protocol (SNTP) version 4
RFC 5905 Network Time Protocol (NTP) version 4
VLAN Support
Generic VLAN Registration Protocol (GVRP)
IEEE 802.1adProvider bridges (VLAN stacking, Q-in-Q)
IEEE 802.1Q Virtual LAN (VLAN) bridges
IEEE 802.1v VLAN classification by protocol and port
IEEE 802.3acVLAN tagging
Voice over IP (VoIP)
LLDP-MEDANSI/TIA-1057
Voice VLAN
Routing Information Protocol (RIP)
RFC 1058 Routing Information Protocol (RIP)
RFC 2080 RIPng for IPv6
RFC 2081 RIPng protocol applicability statement
RFC 2082 RIP-2 MD5 authentication
RFC 2453 RIPv2
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
www.coretelecom.net
x510 Series | Stackable Gigabit Switches
Ordering Information
Feature Licenses
Name
Description
Includes
100Mbps SFP Modules
AT-FL-x510-01
x510 premium license
»» RIP
»»OSPF
»» PIMv4-SM, DM and SSM
»» EPSR master
»»VLAN double tagging (Q-in-Q)
»» RIPng
»»OSPFv3
»»MLDv1 and v2
»» PIMv6-SM
AT-SPFX/2
100FX multi-mode 1310 nm fiber up to 2 km
AT-SPFX/15
100FX single-mode 1310 nm fiber up to 15 km
AT-SPFXBD-LC-13
100BX Bi-Di (1310 nm Tx, 1550 nm Rx) fiber up to
10 km
AT-SPFXBD-LC-15
100BX Bi-Di (1550 nm Tx, 1310nm Rx) fiber up to
10 km
Switches
100Mbps SFP modules are only compatible with the SFP ports
on the AT-x510-28GSX switch.
1000Mbps SFP Modules
AT-SPTX
1000T 100 m copper
AT-x510-28GTX-xx
24-port 10/100/1000T stackable switch with
4 SFP+ ports and 2 fixed power supplies
AT-x510-28GPX-xx
24-port 10/100/1000T PoE+ stackable switch with
4 SFP+ ports and 2 fixed power supplies
AT-x510-28GSX-xx *
24-port 100/1000X SFP stackable switch with
4 SFP+ ports and 2 fixed power supplies
10GbE SFP+ Modules
AT-SPSX
1000SX GbE multi-mode 850 nm fiber up to 550 m
AT-SP10SR
10GSR 850 nm short-haul, 300 m with MMF
AT-SPEX
1000X GbE multi-mode 1310 nm fiber up to 2 km
AT-SP10LR
10GLR 1310 nm medium-haul, 10 km with SMF
AT-SPLX10
1000LX GbE single-mode 1310 nm fiber up to 10 km
AT-SP10TW1
1 meter SFP+ direct attach cable
AT-SPLX10/I
1000LX GbE single-mode 1310 nm fiber up to 10 km
industrial temperature
AT-SP10TW3
3 meter SFP+ direct attach cable
AT-SPBD10-13
1000LX GbE Bi-Di (1310 nm Tx, 1490 nm Rx) fiber
up to 10 km
AT-x510-52GTX-xx
48-port 10/100/1000T stackable switch with
4 SFP+ ports and 2 fixed power supplies
AT-x510-52GPX-xx
48-port 10/100/1000T PoE+ stackable switch with
4 SFP+ ports and 2 fixed power supplies
Where xx =
AT-SP10TW7
7 meter SFP+ direct attach cable
Stacking Modules
AT-SPBD10-14
1000LX GbE Bi-Di (1490 nm Tx, 1310 nm Rx) fiber
up to 10 km
AT-StackXS/1.0
1 meter stacking cable
(includes 2 stacking modules)
AT-SPLX40
1000LX GbE single-mode 1310 nm fiber up to 40 km
AT-StackOP/0.3
Optical stacking module
850 nm short-haul, 300 m with MMF
(two modules required per switch)
AT-SPZX80
1000ZX GbE single-mode 1550 nm fiber up to 80 km
AT-StackOP/9.0
Optical stacking module
1310 nm medium-haul, 9 km with SMF
(two modules required per switch)
10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord
*GSX model will be available in the near future
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
alliedtelesis.com
© 2013 Allied Telesis, Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000474 RevF
Core Telecom Systems partnered with Allied Telesis
(888) 375-8826
www.coretelecom.net
Download PDF