NO291.How to connect PTZ analog camera to both a

Joystick
NO291.How to connect PTZ analog camera to
both a joystick and a DVR?
1. Connect camera's female power cord to male power cord of long cable;
2. Connect camera's female BNC video cord to male BNC video cord of long cable;
3. Connect camera's RS485 cord to RS485 cord of long cable;
4. Connect long cable's femal power cord to power source;
5. Connect long cable's female BNC video cord to DVR's BNC video-in port;
6. Connect long cable's female RS485 cord to joystick's RS485-in port
7. set protocol and baud rate
Finally, you can use joystick to move camera.
8. get another RS485 to connect RS485 out port of joystick and RS485 port of DVR
9. go to DVR's setting to set protocol and baud rate.
Finally, DVR can move camera.
Baud rate: 1200bps、2400bps、4800bps、9600bps、19200pbs、38400pbs
Protocol:Pelco-D 、Pelco-P 、SAMSUNG、AD、PANASONIC
If joystick or DVR can not move camera,
1. check if RS485's positive and netagtive is opposite
2. notice if camera spin by itself when it gets power. if not, camera is broken.
3. check if protocol and baud rate is correct.
Page 1 / 2
(c) 2017 Annke KB Team <support@annke.com> | 2017-07-26 04:12
URL: http://www.annke.com/kb/index.php?action=artikel&cat=36&id=358&artlang=en
Joystick
Unique solution ID: #1360
Author: LeiTian
Last update: 2017-01-31 08:22
Page 2 / 2
(c) 2017 Annke KB Team <support@annke.com> | 2017-07-26 04:12
URL: http://www.annke.com/kb/index.php?action=artikel&cat=36&id=358&artlang=en
Powered by TCPDF (www.tcpdf.org)
Download PDF