Reply® Interact: Product Information Sheet

Reply® Interact: Product Information Sheet
Reply® Interact: Product Information Sheet
Product Appearance
Keypad Comparison
Keypad Functions
Technical Information
Management Functions
System Structure
Certification and Copyright
Press on one of the dedicated buttons above to navigate to the desired section
1. PRODUCT APPEARANCE
Please note: Available keypad functionality is subject to the functionality provided by the software
selected.
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 1 of 9
Reply® Interact: Product Information Sheet
2. KEYPAD COMPARISON
Interact Mini
Interact
Interact Plus
Interact Pro
3.2.1 Generic Sign In
3.2.2 Unique Sign In
3.3 Single Choice
1 out of 5
3.4 Muliple Choice
5 out of 5
3.5 Judge Y/N/A
3.6 Numeric Input
3.7 Sequence
3.8 Raise Hand
3.9 Texting
3.10 Live Examination
up to 10 questions
3.11 Homework
3.12 Messaging
Batch Voting Y/N/A
Batch Evaluation
Elections
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 2 of 9
Reply® Interact: Product Information Sheet
3. KEYPAD FUNCTIONS
3.1
TURN ON/OFF:
-
Press any key to turn on the keypad
-
The Keypad can be turned off through software by the operator or by holding the “C” key for
3 seconds.
3.2
SIGN IN:
The Reply® Interact has two different sign in functions.
1) Generic Sign In
This allows the operator through software to check attendance prior to the meeting.
Sign in is achieved by pressing the OK key when a sign In Question is activated.
2) Unique Sign In
This functional requires the participants to input a code or id that is verified by software.
Using the Unique Sign In function, ensures that the participants can only move forward
and participate on the questionnaires/presentation after they have submitted a valid
login code/id.
3.3
SINGLE CHOICE:
-
Choose 1 out of maximum 10 possible answers (The 0/J key is used when selecting 10).
-
Press an option to submit the desired choice
o
The software allows for the operator to choose:
▪
between Letters and Number
▪
to require OK to submit the vote
▪
to show/highlight the correct answer upon closing the vote
▪
to allow the participant to revise their vote by pressing a new option to
overwrite their previous selection
3.4
MULTIPLE CHOICE:
-
Choose maximum 10 answers out of 10 options (The 0/J key is used when selecting 10)
o
Rule: Number of answers must be lower or equal to Number of Options and lower or
equal to 10
-
Press the Numeric keys to enter the selected options and press OK to submit all choices.
-
Press C to delete the last selection
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 3 of 9
Reply® Interact: Product Information Sheet
-
The software allows for the operator to choose:
o
To show Letters or Numbers in the Display
o
to show/highlight the correct answer upon closing the vote
o
to allow the participant to revise their vote by pressing a new option or series of
options to overwrite their previous selection/selections
o
to allow for submitting the vote only, when the minimum number of answers have
been selected.
3.5
JUDGE MODE (Y/N/A)
-
This mode is used for dedicated Yes, No, Abstain Questions.
-
The software enables the Operator to choose to allow only Yes and No votes, or Yes, No and
Abstain votes.
o
The user is presses 1 for Yes, 2 for No, 3 for Abstain (optional). The Keypad will
display “Y” for Yes, “N” for No and “A” for Abstain
-
Operator can choose to require the user to confirm their Vote with OK or, automatically send
the vote immediately once the key is pressed.
-
3.6
Operator can choose to allow the users to revise their vote or not
NUMERICAL INPUT
-
Enter a free combination of numbers, decimal points and where relevant the minus symbol
-
The vote is submitted once the OK is pressed to confirm the vote
-
The user can delete and revise their last entry in the LCD by pressing C – Key before
confirming the vote with OK
-
Supports up to 16 Digits of input (14 in SN submission mode)
-
Operator can choose to allow the users to revise their vote or not
3.7
SEQUENCE
-
Supports up to 10 answers in random sequence.
-
This mode is used to send a sequence of answers (e.g. to sort the answers in the correct
order).
-
The function allows the operator to:
o
switch between numbers and letters
o
limit the maximum number of options the user can put into the keypad
o
force the user to insert a specific number of answers before he can send the answer
(e.g. for prioritizing a set number of options)
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 4 of 9
Reply® Interact: Product Information Sheet
3.8
o
allow or disallow repeated selection (e.g. for rating on multiple items)
o
allow or disallow the user to revise their votes
RAISE HAND
After the vote has been opened, the participants can press OK to raise their hand to answer a
question.
3.9
LIVE EXAMINATION
With the live examination, the operator can start a self – paced questionnaire where the audience
can answer up to 99 questions in single/multi – choice and sequencing mode.
-
Press the alphanumeric keys to input the selection (max. 10 options) and press the Up or
Down key to go to the next/previous question. Press the Menu – key and select 2-Find to
input the question number and jump to specific question.
-
Keypad will submit the result when moving to the next question.
-
Operator can send the correct answers for review when the vote is stopped to each keypad
individually.
-
The user can review each question and will be notified for a correct or incorrect answer
4. TECHNICAL INFORMATION
4.1 ENCLOSURE
✓
✓
✓
✓
Material: ABS plastics
Dimensions: 92mm ×54mm × 8mm (L×W×H)
Weight: net weight 33g (38g with battery)
Color: black
4.2 KEYPAD ID
✓ Each keypad has a unique ID number between 1 – 9999.
✓ The ID number of each keypad is used as its identification evidence when the keypad
responds.
✓ Support multiple base stations operating at the same place simultaneously without mutual
interference in match mode.
4.3 USER INPUT
✓ 10 voting response buttons: 1/A~10/J.
✓ 2 functional operation buttons: OK for confirmation, C for cancel.
✓ 2 symbol input buttons: decimal point [Up] button, minus [Down] button.
4.4 DISPLAY
✓ 16 Segment LCD with display dimension: 38mm x 16mm.
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 5 of 9
Reply® Interact: Product Information Sheet
✓ Display: up to 5 Characters, Numbers and icons
✓ Able to display: signal strength, channel number, keypad ID, battery status, successful
submission.
4.5 COMMUNICATION PARAMETER
✓ Specific communication protocol:
✓ Once the base station successfully received the response data, it will return confirmation
message and indicate it on the keypad.
✓ Keypad can auto track and lock the channel of the base station in matching mode.
✓ Employs international two way RF 2.4GHz digital communication technology with multiple
channels.
✓ Channels: 80 channels (the corresponding base station should support with 80 channels), RF
power < 1mW (1dBm).
✓ Operation distance: reliable operation within 70 meter radius from the base station
✓ Speed: 160 keypad data collected within 1 seconds during practical test while working with
RPI-1000 base station.
4.6 BATTERY PARAMETER
✓
✓
✓
✓
Battery type: use 2 pieces of replaceable button batteries, type CR2032.
Battery life (2 batteries, depends on battery quality and brand):
250-hour continuous working time
400 hours stand-by time in theory (online)
Six to twelve months’ shelf life after shutdown
4.7 ANTI-INTERFERENCE PARAMETER
✓ As per test result, the keypads will not be influenced by communication devices such as
phones and phone jammers.
✓ If the interference signal of 2.4G devices (such as wireless router) is strong, it is useful to
adjust the base station channel.
4.8 KEYPAD REMOVAL AND MANAGEMENT
✓ The battery cover is equipped with screw hole to meet the requirements of children use.
· Built-in lanyard hole for optional and fashion lanyard.
· Optional carry cases.
4.9 PRODUCT PROTECTION
✓ Testing through practical drop from 1 meter high as a pass.
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 6 of 9
Reply® Interact: Product Information Sheet
5. MANAGEMENT FUNCTIONS
5.1 BASE STATION MODES
1) Match Mode (default): The keypads will be linked to the base station(s), so the user does not
need to change the keypad Channel. When changing the channel on the base station, the
keypads will automatically follow.
2) Channel Mode: This mode is designed for environments where multiple systems will be used
next to each other or one system needs to be divided into multiple rooms. When changing
the channel in this mode, the keypads will not follow the channel automatically. The user
needs to change the channel by holding the Down/CH – Key for 3 seconds.
5.2 KEYPAD ADDRESS
Each keypad has a pre-programmed Address and a unique Serial Number. The Keypad Address can
be changed by holding the Down/CH-Key + 1 for 3 seconds.
5.3 FUNCTIONAL AND BATTERY TEST
The Operator/Software can test the battery and working status of each keypad automatically or
simulate an operation.
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 7 of 9
Reply® Interact: Product Information Sheet
6. SYSTEM STRUCTURE
6.1
BASE STATIONS
RPI 1000
When using a
single base
station, the RPI
1000 together
with IN2100
(Reply® Interact)
keypads, is
suitable for rooms
up to 100 meters
by 100 meters
with a maximum
of 400 people.
RPI 4000
When using a
single base
station, the RPI
4000 together
with IN2100
(Reply® Interact)
keypads, is
suitable for rooms
up to 100 meters
by 100 meters
with a maximum
of 2000 people.
Room Size: 100m x 100 m
Up to 400 with a
Keypads: single base
station
Base station 1 x RPI 1000
Location of Located
Base station centrally (50m x
50m if located
in a corner),
recommended
to place base
station 1.5m
high.
Room Size: 100m x 100 m
Up to 2000 with
Seats: a single base
station
Base station 1 x RPI 4000
Location of Located
Base station centrally (50m x
50m if located
in a corner),
recommended
to place base
station 1.5m
high.
For larger rooms or rooms with obstructions (e.g. columns), or where more keypad capacity is
required, it is recommended that the system is configured with multiple RPI 4000 base stations.
7. CERTIFICATION AND COPYRIGHT
7.1 SERVICE & SUPPORT
✓ Certificate: FCC/CE/ROHS
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 8 of 9
Reply® Interact: Product Information Sheet
✓ Warranty: 2 years (limit maintenance, component and manpower)
✓ Please contact us for details: Sales and agent service: sales@replysystems.com
✓ Technical support service: support@replysystems.com
7.2 CERTIFICATIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
7.3 COPYRIGHT NOTICE
All information related to the products and technology in this document belongs to the copyright of
Infowhyse GmbH. Anyone who browses, reproduces, prints and distributes this document without
due authorization might constitute an infringement of copyright.
The technical parameters in this document may vary due to the actual use, environment, service life
and production batches. If you have any doubt, please do not hesitate to consult Infowhyse GmbH
staff.
Infowhyse GmbH reserves the final right of interpretation of this document.
©2017 Infowhyse GmbH
+49 (6032) 92 59 28 12
Page 9 of 9
Download PDF