CS1290C
CINEMA OVERHEAD SURROUND SPEAKER SYSTEM
SLS AUDIO A DIVISION OF DOLBY LABORATORIES 1650 W. JACKSON OZARK, MO 65721 417-323-7000
TECH DATA SHEET
Specifications/CS1290C*
Operating Range
55Hz to 20kHz
Sensitivity (1W@1M)1
98dB
Horizontal Coverage
-6dB2
40degs
Vertical Coverage
-6dB2
90degs
Power Handling3
400W (56.6V) AES/2
Recommended Amplifier
800W @ 8 ohms
Max SPL (calculated) 1M
124dB continuous/130dB peak
Nominal Impedance
8 ohms
Crossover Frequency
Passive 1500Hz
Transducers
LF 12” Woofer
HF PRD500 Ribbon Driver
Input
Barrier Strip
The CS1290C is a high quality single 12” two-way passive design.
It serves as an overhead surround sound source module for larger
auditoriums.
Dims
22.5” (57cm ) H
15.5” (39.4cm) W
12.39” (31.5cm) D
Enclosure
Baltic birch
The CS1290C high frequency section features a high performance
PRD500 planar ribbon transducer designed and manufactured by
SLS Loudspeakers. The unique design and properties of the planar
ribbon driver allows for a very clear delivery and transient
accuracy even at the limits of its performance. The PRD500 is
contained within a 90 degree die cast aluminum waveguide
rotated so that the 90 degree pattern is in the vertical plane.
Net Weight
43 lbs.
Rigging
U-Bracket Side Mounts & Rear mounts
For 3rd party mounting systems
Optional Accessories
U Bracket (BKT.CS1290-UB)
Adaptive Technologies MultiMountTM
(MM-060)
Finish Options
Flat Black Latex
Description:
Key Features:
u
PRD500 planar ribbon, high frequency driver delivers
unsurpassed sound quality
u
Open and transparent sound even at high SPL due to
advanced transducer technology
u
Optional U-Bracket for easy installation and aiming
u
Attachment points for 3rd party bracket
Applications:
u
Developed for high performance cinema applications where
the highest quality and intelligibility of sound is required
u
Large Format Overhead Surround Source
Rev: 1608
*Due to product improvement research, SLS Audio reserves the right to make changes to existing
products without notice.
1. A sine wave sweep is applied to a voltage level measured at the loudspeaker terminals
corresponding to 1W@1M as referenced to the loudspeakers nominal impedance and the
measuring distance. SPL is measured in an anechoic environment in the loudspeakers far field
with the exception of subwoofers which are measured in half space. Sensitivity is determined by
a Log/Log averaging method from 315Hz to 16kHz in the anechoic environment. Subwoofers use
the same method with the half space measurement but within their specified operating
bandwidth.
2. Averaged from 500Hz to 8kHz
3. AES established in accordance with AES/2-2012 standard.
CS1290C
CINEMA OVERHEAD SURROUND SPEAKER SYSTEM
SLS AUDIO A DIVISION OF DOLBY LABORATORIES 1650 W. JACKSON OZARK, MO 65721 417-323-7000
TECH DATA SHEET
3/8-16 2
PLACES
FOR MOUNTING
BRACKET
2.47
[62.7mm]
1.47
[37.3mm]
10.50
[266.7mm]
12.39
[314.8mm]
12.00
[304.8mm]
TOP
SIDE
15.50
[393.7mm]
2.75
[69.9mm]
3/8-16 4
PLACES
FLY POINT
2.47
[62.7mm]
22.50
[571.5mm]
1/4-20 4
PLACES
FOR
MOUNTING
BRACKET
1.47
[37.3mm]
5.00
[127.0mm]
FRONT
BACK
Rev: 1608
SLS and the SLS Audio symbol are trademarks of Dolby Laboratories Licensing Corporation.
Dolby and Dolby Atmos are registered trademarks of Dolby Laboratories.
All other trademarks remain the property of their respective owners.
© Dolby Laboratories 2016 All rights reserved.
Download PDF