GENERAL INFORMATION
Main Features
For your Safety
Unpacking
General Operation
RCU
1
1
2
4
4
5
INSTALLATION
Front Panel
Rear Panel
Connecting to TV& VCR using SCART support
Connecting to TV using RCA support
Connecting to Digital Amplifier
MENU INFORMATION
Main Menu
1. Channel List
1.1 TV Channel List
1.2 Radio Channel List
1.3 Delete All
2. Installation
2.1 Antenna Connection
2.2 Satellite List
2.3 Antenna Setup
2.4 Single Satellite Search
2.5 Multi Satellite Search
2.6 TP List
3. System Setup
3.1 Language
3.2 TV
3.3 Local Time setting
3.4 Timer Setting
3.5 Parental Control
3.6 OSD Setting
3.7 Favorite
3.8 Other
6
8
6
6
7
7
8
8
9
9
11
11
11
12
12
13
14
15
15
16
16
17
17
17
18
18
19
19
4. Tools
4.1 Information
4.2 Factory Setting
4.3 Upgrade by USB
4.4 Conditional Access
4.5 USB
5. Game
6. REC
6.1 Record Mangager
6.2 HDD Information
6.3 HDD Format
7. Hot key
7.1 Info
7.2 EPG
7.3 Find
7.4 Numer
7.5 TV/Radio
7.6 Up/Down
7.7 Left/Right
7.8 Mute
7.9 Pause
7.10 OK
7.11 Audio
7.12 Recall
7.13 Fav
19
19
19
20
20
21
22
22
22
23
23
23
23
24
24
24
25
25
25
25
25
25
26
26
26
27
A Digital Satellite Receiver is a convenient product that allows you to view a variety
of programs provided through satellite. This user's guide covers the installation of
the DSR and the necessary steps to implement various features. This also explains
special features available only in this DSR in detail, which will allow you to make full
use of these feature.
Information confirmed in this document is subject to change. We reserves the right,
without notice, to make change in product design or performances as progress in
engineering or technology.
Main Features
MPEG-2 digital & fully DVB-S compliant
SCPC and MCPC receivable from C/Ku band satellite
Automatic PAL/NTSC conversion
4000 channels TV and Radio programmable
32 different favorite groups selection
On Screen Display with multi-language
Fully support to 7 days Electronic Program Guide(EPG)
Picture in Graphics(PIG) support
256 colors On Screen Display
Automatic network search for newly added transponders
DiSEqC 1.2 fully support, 13/18V, 0/22K, 0/12V LNB control
Various channel editing function(favorite, move, lock, rename and sort)
Parental control for channels
Easy to use Menu System
Software upgrades through RS232 port and Receiver to receiver
Automatic turn on/off by Timer setting(multiple options)
Subtitle support DVB EN300743 and EBU
Teletext support DVB ETS300472 by VBI and OSD
Automatic save for last channel
Channel list can be sorted by alphabetic A-Z
Up to 3X3 pictures on screen, only 1 active
Video zoom function with 1/2/4/6/8/12/16 ratio
Supprot FAT16/FAT32/FAT12
Only list JPEG/BMP files
Default 2 hours, user can setting the end time(Support subtitle)
Based on size of HDD, 512M~8G size will reserve for time shifted
recording(Support subtitle)
Lock/Delete/Rename,Preview playback,Browse record files information
Play/Pause/Stop/Step
Fast Forward/Fast Backward 2/4/8/16/24, Slow Forward/Slow Backward
1/2, 1/4, 1/8, Jump to user selected time point
480i/p, 576i/p, upscale to 720p, 1080i
For Your Safety
To avoid electric-shock hazards, do not
open the cabinet, refer servicing to qualified
personnel only.
Keep the receiver away from flower vases,
tubs, sinks, etc., in order to avoid damaging
the equipment.
Do not expose the receiver un-der the
sunlight. And keep it away from the heat
source.
Do not block ventilation holes of the
Receiver so that air can circulate freely.
When the abnormal phenomenon occur,
you should cut off the power immediately.
Do not touch the receiver during thunder,
since that might create electric-shock
hazards.
Switch the receiver off whenever it remains
out of service for an extended period.
Be sure to turn the Receiver off and
disconnect the AC power cord before
cleaning the Receiver surface. If the
surface is dirty, wipe clean with a cloth
which has been dipped in a weak soap-andwater solution and wrung out thoroughly,
and then wipe again with a dry cloth.
Warning statement
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Remote Control
Batteries
Guide
AV cable
General Operation
Throughout this manual you will notice that the everyday operation of the receiver is
based on a series of user friendly on screen display and menus. These menus will
help you get the most from your receiver, guiding you through installation, channel
organizing, viewing and many other functions.
All function can be carried out using the buttons on the RCU, and some of the
function can also be carried out using the buttons on the front panel.
The receiver is easy to use, always at your command and adaptable for future
advances.
Please be aware that new software may change the functionality of the receiver.
Should you experience any difficulties with the operation of your receiver, please
consult the relevant section of this manual, including the Problem Shooting, or
alternatively call your dealer or a customer service adviser.
RCU
Key
Function
Turns power ON/OFF of the DSR
When watching a channel, mute the sound
0~9
TV/RADIO
PR
FAV
Enter number of the required menu item or
select a channel number to watch
Switches between TV and Radio mode
Switches back to previous channel
Displays the favorite group list
SHIFT
Timeshift function key
FIND
Display the Find window
INFO
Show information of the current channel
MENU
Press this key one time to run menu onscreen
Moves up / down a page in the list
OK, LIST
PR+, PR-
EXIT
EPG
L
R
Executes the selected item in the menu screen
or enters the desired value in any input mode
When watching a channel, change channels or
move to the next higher or lower item in the menu
When watching a channel, adjust the volume or
move to the left or right item in the menu
Return to the previous menu on the menu
screen or escape from the menu
Call up the EPG (Electronic Program Guide)
Display the Audio window.
TV/AV
Switch between TV and AV modes
TXT
Switch to teletext or subtitle mode
ZOOM
Enter into the zoom in mode
PAUSE
Press once to pause the screen picture, press
once again to go to the normal mode
SLEEP
Enter into the sleep in mode
Enter into the nine-pictures mode displayed
on the screen.
RECORD
,
Record the program
Play and stop the program
Press to fast Forward or fast backward
Press to slow forward or slow backward
Rear Panel
Front
Panel
Rear Panel
LNB IN: CONNECT TO SATELLITE ANTENNA
LNB OUT:CONNECT TO THE OTHER RECEIVER
CONNECT TO A PC FOR S/W UPGRADE
CONNECT TO USB DEVICE
CONNECT TO TV
USING A SCART CABLE
CONNECT TO TV SET HDMI-OUT INPUT
POWER ON/OFF
CONNECT VIDEO TO TV USING RCA JACK
CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER
CONNECT TO A DIGITAL AMPLIFIER
RF OUT: CONNECT TO TV ANT INPUT
Connecting to TV using SCART support
Satellite
Dish
DSR
IN
TV
SCART
Connecting to TV using RCA support
Satellite
Dish
IN
VIDEO
AUDIO
TV
R
L
Connecting to Digital Amplifier
Satellite
Dish
IN
TV
DIGITAL AUDIO
CONVERTOR OR
AMPLIFIER
SPEAKER
L
R
DIGITAL AUDIO
Main Menu
Make sure that you have properly installed and connected the cables of the receiver
well. If the receiver is the factory status or there is no program list, when power on,
the Main Menu window will be displayed on the screen.
During the normal TV/Radio mode, press MENU key on the RCU to enter into the
Main Menu window.
This menu consists of 6 major main menus
as follow.
- Edit Channel
- Installation
- System Setup
- Tools
- Game
- REC
During the installation the OK key confirms a selection and LIST key shows Down
List Box if the column has 34 mark. You can also use the numeric keys on the
RCU to enter numeric value.
Use the PR+, PR- key to move upwards and downwards from one line to another
line and use
key to move from main menu to sub menu and move from left
side to right side or versa.
Meantime, you want to escape the menu system, please press MENU or EXIT key
on the RCU.
If there is no program, you can not exit from the Main Menu window by pressing
MENU or EXIT key. System will inform "No channel" and the following items turn grey.
Sub-menu
Turn grey when there is no program
Channel List
TV Channel List
Radio Channel List
Delete all
Antenna Connection
Satellite List
Antenna Setup
Single Satellite Search
Multi Satellite Search
TP List
Installation
System
Language
Local Time Setting
Parental Lock
Favorite
Tools
Information
Upgrade by USB
TV System
Timer Setting
OSD Setting
Other
Factory Setting
Conditional CA
Game
Tetris
REC
Record Manager HHD Information
HHD Format PVR Setting
Othello
Sudoku
USB
1. Channel List
1. Press OK key or
key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted. The
default password is "0000".
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or
key to move the focus to
the left menu.
1.1 TV Channel List
1. Press
keys to select satellite.
2. Press PR+, PR- keys to select the program that
you want to play, and then press OK key to view it in
the small window. If move the yellow cursor to
select up or down, you will see a gray line which
indicates the playing program in the small window.
3. Press FAV key to move the FAV button upward.
Select the program and press OK key to pop up the
favourite group list. In the list, select the group that
you want to add into and press OK key, and then
you will find the favourite mark is displayed at the
right side of the selected program.
Press FAV key again to exit from the fav mode, and
you will find the FAV button return to the origin
position.
4. Press red colour key to move the Lock button
upward. Select the program and press OK key to
mark this program with the Lock mark. You can
cancel this mark by pressing OK key once more.
Press red colour key again to exit from the lock
mode, and you will find the Lock button return to
the origin position.
5. Press green colour key to move the Skip button
upward. Select the program and press OK key to
mark this program with the skip mark. You can
cancel this mark by pressing OK key once more.
Press green colour key again to exit from the skip
mode, and you will find the Skip button return to
the origin position.
6. Press yellow colour key to move the Move
button upward. Select the program and press OK
key to mark this program with the move mark. Press
PR+, PR- keys to move the cursor to the position
where you want to locate and press OK key to
confirm.
Press yellow colour key again to exit from the
yellow mode, and you will find the yellow button
return to the origin position.
7. Press blue colour key to enter into the Edit
channel window.
i . Sort (red colour key)
Press red colour key to pop up the Sort drop-down
list.
Name(A-Z): The ascending order, omitting the $
character, the number is ahead, then the capital
letter, at last the lowercase.
Name (Z-A): The opposite order of the above Name
(A-Z).
Free/Scramble: All FTA programs are listed ahead,
while all scrambled programs are listed last.
Lock: all locked programs are listed at the last.
ii. Edit (green colour key)
Press green colour key to move the Edit button
upward. Select the program and press OK key to
pop up the Rename window.
In Rename window, press red colour key to switch
between capital letter and lower letter; press green
colour key to delete the character on the cursor;
press
keys to move the cursor left or right;
press numeric keys (0-9) to input the character,
please refer to the down table. Press yellow colour
key to save and exit, or press blue key to cancel
and exit.
Numeric keys
Press numeric key repeatedly, display in circle
1
.,*?!@1
2
ABC2
3
DEF3
4
GHI4
5
JKL5
6
MNO6
7
PQRS7
8
TUV8
9
WXYZ9
0
[space]_-0
If the name is empty, system will pop up a dialogue informing "Name" once yellow
colour key is pressed. Press OK key to close this dialogue.
iii. Delete (blue colour key)
In Delete window, press blue colour key to move the
Delete button upward. Select the program and press
OK key to mark this program with the deletion mark.
You can cancel this mark by pressing OK key again.
Press EXIT key to pop up the dialogue "Are you sure
to save?". Select Yes button and press OK key to
save, or select NO button and press OK key to exit
without saving.
1.2 Radio Channel List
Sine the same operation as 1.1 TV Channel List, here we don't explain any more.
1.3 Delete All
Move cursor to the Delete All item, and press OK Key
to pop up the dialogue "Warning! Do you really want
to delete all channel?".
Press EXIT key to pop up the dialogue "Are you sure
to save?". Select Yes button and press OK key to
save, or select NO button and press OK key to exit
without saving.
2. Installation
1. Press OK key or
Password" dialogue,
key to pop up the "Input
you can not enter into the
menu unless the correct password is inputted. The
default password is "0000".
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or
key to move the focus to the left menu.
2.1 Antenna Connection
Press
keys to select between Motor Antenna
and Fixed Antenna.
2.2 Satellite List
1. Press PR+, PR- keys to select the satellite up or
down. Press OK key to select and mark, and you can
press OK key again to cancel the selection and the
mark.
2. If there is no satellite, the red colour and blue
colour keys will be invalid.
3. Press red colour key to pop up the Edit Satellite
window. Press PR+, PR- keys to move cursor up or
down.
Name: User numeric keys to change the name of the
satellite, please refer to the Edit Channel Name.
Longitude: You can press
keys to switch
between east longitude and west longitude. After
pressing OK key, you can use numeric keys to edit
the longitude, press EXIT key or the PR+, PR- keys
to exit editing mode. The range of the longitude is from 1to 180 degree. If beyond
this range, system will inform you "out of range" when you press yellow colour key
on the RCU. After setting, press yellow colour key to save and exit, while press blue
colour key to exit without saving.
4. Press green colour key to pop up the Add
Satellite window. Since the same operation as the
above Edit Satellite window, here we don't explain
any more.
5. Press blue colour key to pop up the dialogue "Are
you sure to delete?". Select Yes button and press OK
key to delete the selected satellite. You can cancel
this operation by pressing OK key at the NO button.
2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed Antenna in
the Antenna Connection window.
1. Satellite: All selected satellites in the satellite list
are displayed in this item.
Press
keys to select the satellite in circle. Or
press OK key to pop up the drop-down list, then select the desired satellite in the
list and press OK key to confirm.
2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
3. 22K, 0/12V, Polarity: You can press
keys to select in circle.
Part B: Motor
Suppose that you have selected Moter Antenna in
the Antenna Connection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2 and
USALS. If you select DiSEqC1.2, the following Local
Longitude and Local Latitude items will turn grey.
3. Delete All: Press OK key to pop up the dialogue
"Are you sure to clear set satellite position of this
tuner?". Press OK key at the Yes button to clear all
the memories about the position of the satellites that
has connected to the current turner.
4. Motor Setting: Press OK key to the Motor Setting
window.
Satellite: Press
keys to select the satellite in
circle. Or press OK key to pop up the drop-down list,
then select the desired satellite in the list and press
OK key to confirm.
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position.
You can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position
(reference or from 1to 63) to realize the selected position.
West <Save> East: Press
key to turn west, while press
key to turn east.
Press OK key to pop up the dialogue "Are you sure to change this satellite's
position?". Press OK key at the Yes button to save the current position, or press OK
key at the No button to cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.
5. Limit Setup: Press OK key to pop up the Limit
Setup window.
Limit Setup: Press
keys to switch among
Disable Limit, East Limit and West Limit.
Limit Setup: Move cursor to the Limit Setup button.
You can press
key to turn west , or press
key
to turn east.
Go to Reference: Press OK key to go to reference.
If you select Disable Limit in the above Limit Setup
item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press
keys to switch between West and East, or
press
keys to switch between North and
South. Press OK key to enter into the editing mode.
Use numeric keys (0-9) to input the longitude or
latitude, press MENU key or EXIT key to exit. The
range of the longitude is from 0 to 180,while the
range of the latitude is from 0 to 90. If the inputted
value is not in this range, system will pop up a
dialogue "Out of Range" when exit from this
window. You can press OK key to close this
dialogue.
7. Motor Setting: Press OK key to enter into the
Motor setting window.
Satellite, Transponder: Press
keys to
select satellite or transponder, or press OK key to
pop up the drop-down list and select in the list.
2.4 Single Satellite Search
1. Satellite : Press
keys to select the
satellite in circle. Or press OK key to pop up the
drop-down list, then select the desired satellite
in the list and press OK key to confirm.
2. FTA Only: Press
keys to select between
Yes and No.
3. Scan Channel: Press
keys to select
among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes.
This item turns grey when Auto Scan is selected in
the following Scan mode item.
5. Scan Mode: Press
keys to select between
Auto Scan and Preset Scan. Auto Scan is Blind
scan, while Preset Scan is to search the preset
frequencies.
6. Search: Press OK key to start searching.
2.5 Multi Satellite Search
From the Multi Satellite Search window, you can
search several satellites at the one time.
1. Satellite: All selected satellites in the satellite
list window are displayed on the down part. You
can press
keys to switch among them.
2. FTA Only: Press
keys to select between
Yes and No.
3. Scan Channel: Press
keys to select
among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This item turns grey when Auto
Scan is selected in the following Scan mode item.
5. Scan Mode: Press
keys to select between Auto Scan and Preset Scan.
Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.
6. Search: Press OK key to start searching.
2.6 TP List
1. Press PR+,PR- keys to select the proper satellite.
2. Press red colour key to pop up the Edit TP
window.
Frequency, Symbol rate: Press
keys to add
or reduce by step one. Or press numeric keys (0-9)
to input
the desired value. The range of the
frequency is 3000-13450, while the range of the
symbol rate is 1000~45000. The inputted value is
beyond this range, the value will return to the origin
value.
Polarity: Press
Vertical and Horizontal.
keys to switch between
3. Press green colour key to pop up the Add TP
window. Since the same operation as the above Edit
TP window, here we don't explain any more.
4. Press yellow colour key to pop up dialogue " Are
you sure to delete?". Press OK key at the Yes button
to delete the selected TP, or press EXIT key to
cancel the operation.
5. Press blue colour key to pop up the TP Search
window.
FTA only, Scan Channel, Network Search: Press
keys to select the proper option.
Press OK key at the OK button to start searching.
3. System Setup
1. Press OK key or
key to move the cursor to
the right menu.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or
key to move the focus
to the left menu.
3.1 Language
1. Press OK key to enter into the Language
window. Press
keys to select the language in
circle, while press PR+, PR-
keys to move the
cursor up or down in circle.
2. Press MENU key or EXIT key to save and exit.
3. The types of the language, pleaser refer to the
configuration of the customer.
3.2 TV
Press PR+, PR- key to move the cursor up or down,
while press
keys to change the setting and
the setting will take effect immediately.
1. Display Mode: Select among Auto,PAL, PAL-M,
PAL-N, NTSC.
2. Aspect Mode: Select among 4:3LetterBox,
4:3PanScan, 16:9.
3. Video Output: Select between RGB and CVBS.
4.RF System: Select among PAL,PAL- M,PAL-N,NTSC and Auto.
5.RF Channel:PAL:21-69,NTSC:14-83.
6.DV-OUT: Select among 480P/576P,720P,1080i and 480i/576i
3.3 Local Time Setting
1. Summer Time: Select between ON and OFF.
"OFF" delegates the normal time. If select ON, time
will add one hour.
2. GMT Offset: When select "ON" in GMT Usage
item, system will get the date and time information
from the screen automatically. Date and Time two
items will turn grey. Select the proper option in the
GMT Offset item. The default setting is GMT ON.
3.Date, Time: When select "OFF" in GMT Usage, Date and Time two items take
effect, while GMT Usage turns grey. Use numeric keys to input the desired value.5.
After setting, press MENU key or EXIT key to exit and save. If the value is invalid,
system will inform "Invalid input! Continue to edit?". Press OK key at the Yes button
to continue the modification, or press OK key at the No button to exit without saving.
3.4 Timer Setting
If there is no program, you can not enter into this
window. There are 8 timers that can be set. Select
Timer up or down, and press OK key to enter into the
setting window.
1. Timer mode: The default mode is off. You can set
the timer once, daily, weekly, monthly and yearly.
2. Timer Service: Select between Channel and
Message. If Channel is selected, the Wakeup
Channel is displayed in the following item. If
Message is selected, the Wakeup Message is
displayed in the following item. In wakeup message,
you can select among Birthday, Anniversary, General.
At the same time the duration item turns grey.
3. Wakeup Date, On Time: Use numeric keys to
input the valid date.
Duration: Set the gap time. After waking up, system will power off automatically
after the duration time.
Press MENU or EXIT key to save and exit.
3.5 Parental Lock
Before entering into the Parental Lock window, you
need input the correct password. The default
password is 0000.
1. Menu Lock: Press
keys to select between
Off and On. If select "On" , you can not enter into
the most window before entering the password.
2. Channel Lock: Press
keys to select
between Off and On. The default value is Off.
If select "On", you can not view the locked channel set in Chanel List Edit window
until you have inputted the correct password.
3. New Password: User numeric key (0-9) to input the new password.
4. Confirm Password: Input the new password once again. Confirm password
must be the same as the New password. System will inform you "Change password
successfully!" while they are the same, or inform you to input the password of
Confirm password once again when they are not the same.
3.6 OSD Setting
1. Subtitle Display: Press
keys to select
between On and Off.
2. OSD Timeout: Press
keys toselect from 1
to 10 by step1. The default values Is 5.
3. OSD Transparency: Press
keys to select
among Off, 10%, 20%, 30%, 40%. The default
option is Off.
Press MENU or EXIT key to save and exit.
3.7 Favorite
There are 32 favorites group listed in this window.
Press PR+, PR- keys to select one and press OK
key to the Rename window. Since the same
operation as the above the Add Satellite window,
here we don't explain any more.
3.8 Other
1. LNB Power: Select between Off and On.
2. Channel Play Type: Select among All, Free,
Scramble.
3. Channel Change: Select between Freeze and
Black screen.
4. Beeper: Select between Off and On.
4. Tools
1. Press OK key or
key to pop up the "Input
Password" dialogue, you can not enter into the menu
unless the correct password is inputted. The default
password is 0000.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or
key to move the focus to
the left menu.
4.1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to the
factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel and
exit.
4.3 Upgrade by USB
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode and Dump. When users switch the
upgrade mode, Upgrade File will show the corresponding file according to the
table below:
Upgrade Mode
File feature
All code :
File named as "*.abs"
Main Code:
File named as
Radio back:
*.bin
File named as "*.m2v", the picture
will be used as both radio back and
menu back
Default db:
File named as "*.bin"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
4.4 Conditional Access
Select Conditional Access item and press OK key, then you will enter into its
sub-menu which consists four items of About CA Info, Change PIN, Change
Signature PIN, Maturity Level.
4.4.1 About CA Info
In About CA Info sub-menu, you can know the
basic information about this conditional access
such as Card Status, CAS System ID, Interface
Version, Card Number, Number of sessions,
Country Indicator, and Maturity Level.
4.4.2 Change PIN
Changes PIN window is designed for changing the
smart card's PIN, which is required if you want
change the maturity level settings.
In order to change the PIN, you must know the
current PIN also called the old PIN. Input the new
PIN and twice the PIN (New PIN and Confirm PIN
must be the same) your want to set. Move cursor to
OK button and press OK key, and then system will
pop up a dialogue informing you the changing
result.
Note that the PIN can only constructed with Arabic numerals.
4.4.3 Change Signature PIN
Do the same way as the above Change PIN.
Note: The signature PIN will be locked after the
three erroneous attempts to enter the correct PIN.
If locked, please call the dealer for help.
4.4.4 Maturity Level
Input the PIN then Move cursor to Select Maturity level,you can select AOver18,X-Erotic,G-General audience,PG-Parental Guidance,move cursor to
Change Maturity level button and press OK key,and then system will pop up a
dialogue informing you the changing result.
Subscription Status, Even Status, Tokens Status
4.5 USB
USB menu will be automatically shown when insert U
disk to USB port except auto scan, multi picture,
upgrade. Or open USB menu according to Menu ->
Tools-> USB. Press OK to enter into this window.
USB menu will be disabled when no USB device is
plugged. Media Play List will not be saved when USB
plug out or standby or power off.
Move scroll bar when press up/down key, page up or down by page key. Go into
sub-directory when press
ok key in the file directory , play the selected file when
scroll bar is on the file, automatic return USB
menu after play is over.
Function Key
Yellow key: Press to show the Play List
Red key: Press to show the
Green key: Press to show
add all music to th Play List
2.Press number key 1 to add all images to th Play List.
3.Press number key 2 to
.
FAV:Press FAV key add
Play List
Press PR+,PR- key to select the image you want, and
press FAV key to add the image to Play List . Press [OK]
on Play List button you can see the image you selected
and in this list you can play and delete them.
Red key: Playing the image in full screen.
Yellow key: Delete the image you selected.
Blue key: Delete all the image in the list.
.
Setup
Slide Show Time: Select among 0-9sec.
Slide Show Repeat: Select between on and off.
Sort
Pressing [OK] on Sort button, it will pop up the Sort
drop-down list.
Name(A-Z): The ascending order, omitting the $
character, the number is ahead, then the capital
letter, at last the lowercase.
Name (Z-A): The opposite order of the above Name
(A-Z).
5. Game
1. Press OK key or
key to enter into the game.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or
key to move the focus
to the left menu.
4. Select the game that you want to play and press
OK key to enter into the window.
6. REC
6.1. Record Manager
1. Press PR+, PR- keys to select up or down,
2. Press green color key to lock the channel you
selected, the lock symbol will be marked behind
the channel. Before you lock the channel you must
input the correct password, the default password
is 0000.
3.Press blue color key to delete the channel you selected.
4.Press red color key to pop up the window for renaming the channel you
selected,press numeric keys (0-9) to input the character .
5.Press [Play] key to preview. Press [OK] to play the recorder in full screen as below
picture.
6.Press [Pause] key to pause. Press [Pause] key repeatedly to realize the step
function. Press
/
key to fast Forward or fast backward. Press /
key to slow
forward or slow backward .
6.2 HDD Information
Show you the information in windows as besides.
6.3 HDD format
You can know the information about USB disk in this
window.
Red key: Press red key to format the disk.
Green key: Press green key pop up DVR Set window,
you can select DVR type in this window
7. Hot Key
7.1 Info
Press INFO key to pop up the Info bar.
Press INFO key again to pop up the program guide
of the current program.
7.2 EPG
Press EPG key to enter into the EPG window.
1. Press PR+, PR-,
keys to select up or
down, left or right.
2. Press red colour key to pop up the Time Bar
window. Press PR+, PR- keys to select up or down,
while press
keys to select left or right in the
time bar.
: Press OK key at this button to return to the
EPG window.
: Press OK key at this button to move the
cursor to the current time line.
: Press OK key to push the time forward or
backward by half an hour.
: Press OK key to push the time forward or
backward by half an hour.
: Press OK key to push the time forward or
backward by a day. From the current day, you can
switch among the future 14 days in circle.
3. Detail Information: In the EPG window, press PR+, PR-
keys to select
the channel and program, and press OK key to know the detail information of the
current program.
4. Press green colour key to enter into the Timer window. You can add the current
program to the Timer. If 8 timers is already, system will inform "Timer is full!'.
7.3 Find
Press FIND key on to pop up the Find window. Use
numeric keys to enter into the character and use
the colour keys to realized the corresponding
operation.
7.4 Number
Use the numeric keys (0-9) to input the number of the desired channel. If the
inputted number is beyond the valid channel number, system will "No such a
channel" and press OK key to close this message.
7.5 TV/RADIO
In normal mode, press TV/RADIO key to switch between TV mode and Radio mode.
7.6 Up/Down (Channel Change)
Press PR+, PR- keys to change the channel up or down. If in the all satellites group,
you can select channel in all searched channels. If in the specific satellite, only can
select channel in the satellite group.
7.7 Left/Righ (Volume+/-)
Press
keys to change the volume. Press
while press
key to decrease the volume ,
keys to increase the volume .
7.8 Mute
Press
key to close the volume. You can press
volume, or press
key once again to restore the
keys to open the volume.
7.9 Pause
During the viewing, you can press PAUSE key to stop the picture while the volume
continues. You can play the picture by pressing PAUSE key once again.
7.10 OK
1. During the viewing or listening, press OK key to pop up the TV program list or the
Radio program list.
2. Press PR+, PR- keys to select the channel up or down, and then press OK key to
play this channel in full-screen.
3. Press
keys to select the satellite.
4. Press MENU or EXIT key to close this window.
7.11 Audio
1. Press keys to enter into the Audio window.
2. Press
keys to select among Left, Right,
Stereo, and Mono.
3. Changing the audio mode is only connected with
the current channel, not all the channels.
4. Press MENU or EXIT key to close this window.
7.12 Recall
Press
key to switch the current channel to the previous channel.
7.13 FAV
1. Press FAV key to pop up the favourite group
window.
2. Press
keys to select the favorite group.
Press PR+, PR- keys to select the channel up or
down.. Press OK key at the selected channel to
view it in full-screen. Press MENU or EXIT key to
exit.
3. If there is no favorite channel, system will inform "
No FAV Channel!" when you press FAV key.
7.14 Teletext
Press TXT key to open the teletext on the screen. If there is no teletext, system will
inform "No Teletext Data". Press EXIT key to exit.
7.15 Zoom
1. Press ZOOM key to switch among Zoom*1, Zoom*2, Zoom*3, Zoom*4, Zoom*5,
Zoom*6, Zoom*8, Zoom*12, Zoom*16.
2. In zoom mode, press PR+, PRkeys to move the cursor up, left, right,
down.
3. Press MENU or EXIT key to exit
26
Problem
Possible causes
What to do
The display on the front
panel does not light up.
Main cable is not connected.
Check that the main cable is plugged into
the power socket.
No sound or picture, but the
front panel shows red light.
The receiver is in standby mode.
Press the standby button.
The satellite dish is not pointing at the
satellite.
Adjust the dish. Check the signal
level in the Antenna Setup menu.
No signal or weak signal.
Check the cable connections, LNB and
other equipment connected between the
LNB and the receiver, or adjust the dish.
No sound or picture.
Bad picture / blocking
error.
The satellite dish is not pointing at
the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to the LNB
input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor too high.
Change to an LNB with lower noise
factor.
The LNB is faulty.
Change the LNB.
The picture is not
showed on the screen,
when switching on.
The system is connected by RF
leads.
Check the UHF channel fixed in your
system and tune the UHF channel
properly.
There is interference on
your digital satellite
channels, an existing
terrestrial channel or video
signal.
The system is connected by RF
leads and the output channel of the
receiver interferes with an existing
terrestrial channels or Video signal.
Change the receiver output channel to
a more suitable channel, or connect the
system by SCART leads.
Battery exhausted.
Change the batteries.
RCU is incorrectly aimed.
Aim RCU at the receiver, or check that
nothing blocks the front panel.
The RCU is not working.
Note : If you have tried all of the actions suggested above, without solving the
problem, please contact your dealer or service provider.
27
Download PDF