LED-PRO - Lang AG

preliminary
LED-PRO™
User-friendly solution to drive Barco LED walls
Powerful performance
Utilizes Athena, proprietary high performance image processing technology
Low Video Delay (3 input fields max)
10-bit processing
Motion Adaptive de-interlacing (SD&HD)
Decodes NTSC, PAL
Ethernet for real-time control
64 Independent Memory Presets
Contrast and Gamma Adjustments
Professional effects
Pan and zoom
Freeze
Logo Store
Transition to/from Stored Logo
Extreme versatility
64 independent memory presets
Scaler Sharpness Control
User-defined aspect ratio conversion and adjustments
Video Decoder Adjustments (NTSC, PAL) Brightness, Contrast, Hue, Saturation
User Control
1 of 4 input sources or internal logo image may be selected
Folsom
LED-PRO Specifications
VIDEO INPUT
Universal A/V Inputs
Three universal inputs support RGBHV/RGBS/RGsB computer video, Component video
(std or HDTV), S-video, or Composite video
Input 1 DVI-I connectors support both universal Analog and DVI input with loop-through.
Input 2 on 15-pin HD connectors with buffered loop-through.
Input 3 on five BNC connectors with buffered loop-through.
SDI/HDSDI Input on BNC Connector with buffered loop-through.
Genlock on BNC connector
Horizontal Frequency
15 kHz to 120 kHz
Vertical Frequency
25 Hz to 120 Hz
Standard Resolution Video Input
NTSC, PAL
Input Resolution Range
VGA (640x480), SVGA(800x600), XGA(1024x768), SXGA(1280x1204),
Input Termination
75 Ohm
Digital Video
SDI, HDSDI, DVI
Input Sync
Sync-on-Video, Separate C or H/V
Genlock Input
NTSC/PAL
VIDEO OUTPUT
Main Outputs
Output 1 - RGBHV on HD-15 connector.
Output 2 – Proprietary Barco LED interface DVI-I connector.
Input Loop
Buffered, 75 Ohm output impedance
Standard Resolution
NTSC, PAL
High Resolution
800x600 Timing Format
Digital Video
Proprietary Barco LED interface DVI-I connector
Sync
RGBHV
USER CONTROL
Intial Calibration and Setup
Xlite Toolset provides integrated control for initial calibration of tiles and setup of LED-PRO parameters.
Operation
Once calibration is complete the operator can easily select from 4 different video sources via the LEDPRO front panel controls. See Interface Description Document for more details
Computer or
Third Party Control System
RS-232 port (DB-9) or Ethernet (RJ-45)
Folsom
www.barco.com
Barco Media and Entertainment
11101 Trade Center Drive Rancho Cordova, CA 95670
Tel. 916 859 2500 Fax 916 859 2515
Download PDF