BEETLE i815E motherboard onboard graphics driver

BEETLE i815E motherboard onboard graphics driver
Release 6.7 Release Kit 5403 for all BEETLE i815 motherboards
Contents of DOWNLOAD.ZIP:
Windows 2000 and Windows XP
(package 6.7)
Win2KXp
Windows NT4
(package 6.7)
WinNT4
Windows 98SE and other 9x
(package 6.7)
Win9x
NEW WN*.INF file for monitor installation
AddOns.WN
This information…
README.PDF
For WN motherboards D2, D2*, D2basic, ... using analogue “CRT”- or PLINK-bridge.
Always download also general D2 installation hints:
This is a collection of useful remarks, needed information, etc. to be found at
download area: "CPU onboard components --> D2 (i815) --> installation hints"
Mechanical setup for WN displays before first start up
Since beginning of year 2005, you will receive new WN DDC display types that
support plug and play by DDC, instead of older non-DDC ones, that needed to
be configured by jumpers on motherboard!
Unfortunately, there may be…
(a) An old display that do not send DDC data ...................“BA7xA” (“BAx2A-2” do)
(b) An old cables that do not forward DDC data
(c) An old D2 PLINK bridges that do not forward DDC data
The driver release 6.13.01.3196 from Windows package 6.7 supports DDC.
(Previous information were based on older driver releases, please ignore!!!)
Check the whole BEETLE D2 configuration (“DDC chain”):
Æ BRIDGE Æ DRIVER
Æ CABLE
DISPLAY
DDC type!
onboard
6.7 package
Æ
OS setup
Win registry
If you replace one of the old components only, the plug and play feature will not work
as you may expected it and you need to setup the onboard jumper:
The 12” model BA72A-2 needs a different refresh rate:
New BA72A-2 (BA72A-1) .......................................... 59Hz
Old BA72A.............................................47Hz (interlaced)
Onboard jumper for WN TFT displays:
PT321
WN type
Size
Mode
Resolution
BA72A
12"
SVGA
800x600x47Hz
BA73A
15"
XGA
1024x768x60Hz
BA72A-1
12"
SVGA
800x600x59Hz
Banking PB
10"
VGA
640x480
---
848x480
1
1
1
1
1
Plasma TFT
Å Used for BA72A-2
Å Projects only
Å Projects only
Wrong jumper setup may cause corrupted screen output if the DDC chain is broken.
BEETLE i815E motherboard onboard graphics driver
Release 6.7 Release Kit 5403 for all BEETLE i815 motherboards
Installation sequence for all D2 motherboard drivers:
1. Before installing any operating system, it is good practise to have a look for
D2 BIOS updates at WN INTRANET / EXTRANET.
If you found a new release, run flash update before installation of operating
system. This prevents PnP operating systems from detecting new hardware after
complete installation procedure. Even non PnP ones may show strange effects
after flash update!
2. After you installed the operating system…
3. Install chipset drivers (INF tool) first. This is not needed for Windows NT4.
4. Reboot the system
5. Now, you should install video driver to see a “beautiful” desktop...
6. You may install the monitor by using WNFPDSP.INF (from DOWNLOAD.ZIP)
See “Windows XP WN display installation” …
7. Reboot the system, when asked
BEETLE i815E motherboard onboard graphics driver
Release 6.7 Release Kit 5403 for all BEETLE i815 motherboards
WN display installation for Windows XP
The driver package includes a file WN*.INF, which is provided in DOWNLOAD.ZIP,
but not only made for D2 motherboard onboard video. It sets up parameters for all
WN displays connected to WN motherboards.
How to install a WN display?
1. Open [display] [properties] dialogue
2. If more than one display is connected,
select the video controller the display is connected to.
This (Æ) is an example of what
you see if WN BA73A is to be
installed at PLINK bridge of E1
motherboard with BA73A as
2nd screen at SM712
controller:
3. Select [Advanced] options
4. Select the [Monitor] tab and
click [Properties] of monitor.
5. Select [Driver] tab and
next [Update Driver]
6. Enable [Install from … a
specific location]
7. Enable [Don’t search…]
8. Disable [Show
compatible
devices] !!!
9. Select WincorNixdorf related WN
display and
terminate it all by
[Next] …
Download PDF