IP CAMERA User Manual - GLOBAL Export

1. Download the APP “IEye”, install and register.
Google Play IEye
Appstore IEye
Scan QR code
Register an account by phone number or Email.
IP CAMERA User Manual
2. Add and Delete a New Device
1). Add a new device by Smartlink
2). Add a new device by QR code.
to add a new device. Smartlink helps new starters to connect the
camera to WIFI easily. Power on the new camera, enter WIFI SSID & password
(the same WIFI as your smartphone has connected to). Wait for connection.
More →Add camera by QR Code →Enter WIFI SSID & password →Next, a QR
Code emerges, scan the QR code →Heard, wait for connection → Connected
(NET indicator light on), enter the password of the camera(default 123456)→
Save the device → It is online.
After hearing a ding sound from the camera, its net indicator light turns on. The
camera connects to WIFI successfully.
Name the camera whatever you like, for example “Cam1098735”, enter its
password”123456” (default). Press
. The camera is online.
3). Manual Add
4). Delete a device
This is used to add a new
camera that is already on
line. (Which means the
camera has already been
connected to WIFI, and
you know the ID and
password of the camera.)
Android------Long-press the
camera that is to be deleted, a
prompt comes out, press OK.
IOS------Choose the camera,
slide to left to delete.
3 . Live - view and its settings
4 . General Settings
Click to live view
Online/ offline
camera name
, prompt
Defence on/off
Click to live view
You can see the recording list on
General seetings for the
the SD card.
HD 720P
ne on/off
Date & Time
Resolution indicator
Positions Preset
Attention: Position preset is a very practical function.
【 DO NOT hand-rotate the head of the camera!!】
Rotate the camera on phone app to the place you
want , then press button 1, press OK. A camera can
support 5 positions preset.
You can edit name and
password for the camera.
5 . Alarm Settings
1). Defence Area
General settings
Choose the right
Change admin
time, press “Apply”
Attention: wrong time
Set guest password
may affect rec ording
(it enables users only
to view, lis ten and
talk, not to set or to
Learn code with other alarm detectors
The camera can support max. 64 channels of wireless alarm detectors. All
the external detectors must learn code with the camera before normal use.
For example, to set up a door sensor as the first detector of the hall, choose
the hall, click button “1”, press “ OK” to code. Trigger the door sensor,
the camera will remember the code and learning is successful. There is
a blue
left to button “1”.
Binding preset can be done here. Press“ OK” and make the door
sensor in position 1. It means the door sensor is set to be in position 1
view recordings)
6 . Record Settings
2). Alarm Settings
3). Alarm pushing settings
【 A ndroid 】 Enable A larm Vibrate , A larm Ring,
se t A larm Ring.
Plug in the SD card when the camera is power off. Normally the SD card is
with capacity 8-32GB, max 128GB (If the SD card capacity is above 32GB,
please format the SD card on PC as FAT32 first.)
SD card in and working well------ record indicator lights on
Recording ------record indicator flickers
【 IO S 】 A larm Vibrate and A larm Ring is not
configurable in Iphone .
Manual Recording
Alarm Recording
Scheduled Recording
4).If you set the right alarm pushing but can not receive alarm
messages, try to check here.
7 . Device Update
Set alarm interval (default 10s)。
Check if you blocked the camera. If yes, just
delete it, then you can receive alarm messages.
9. Q & A
8 . APP Functions
1). Can’t discover the camera in same LAN?
Make sure that your phone and the camera connect to the same router.
Device list
Alarm pushing
More system settings
2). The camera can’t record?
Format SD card on phone APP or take out the SD card and format it on PC. Then plug in the
SD card. If record indicator is off, it means something wrong with the SD card itself. Power
off the camera when plug in or take out the SD card.
3). Scanning QR code doesn’t work?
Check if the camera is facing straight to the QR code, and then move your phone.
4). Camera list shows offline ?
Make sure if the camera is successfully connected to network. The camera must connect to
the router, not directly to modern.
5). Camera list shows
First check if the network indicator light is on. If not, it means the camera is not connected
to network.
Second check if you enter the right password.
Sign out
6). Forget the password of the camera?
There is a reset button hole on the bottom of the camera. Reset the camera , then the
camera restores the default password “123456”
7). Mobile phone APP “IEye” and CMS on PC can’t access to the camera simultaneously?
An account can be used by only one user at the same time. Register more accounts for
8). Can’t receive alarm emails?
Check if the emails are in your spam folder.