37” High Resolution XGA CMP307XU

PLASMA
Display
CMP307XU
37” High Resolution XGA
*
High resolution XGA (1024 x 768)
*
4:3 aspect ratio
*
160 degree viewing angle
*
Theater operation (capable of 16 million colors)
*
Multiscan capability (PC Analog RGB)
*
Standard video inputs (BNC, s-video)
*
Built-in screen saver
*
Internal speakers
37-Inch High Definition Plasma Display
Model
CMP307XU
External dimensions
General
34.8"
Power supply
Frequency
Power consumption
Dimensions
Weight
AC100~120V
50/60Hz
34.8" (W) x 26.9" (H) x 3.9" (D)(excluding stand)
65 lbs., 9 ozs. (excluding stand)
Signal input and terminals
Video
Analog (PC) RGB 1
30.1"
26.9"
390W (typical)
Display characteristics
Effective display area
Aspect ratio
Number of pixels
Pixel pitch
Number of colors (gray levels)
Brightness
Contrast ratio
Viewing angle
29.6" (horizontal) x 22.2" (vertical)
4:3
1024 (horizontal) x 768 (vertical) pixels
0.735 (horizontal) x 0.735 (vertical) mm
2.09 million colors (128 gray levels)/16.7 million colors (256 gray levels)
150cd/m2 (typical) at white peak (with front filter, 2.09-million-color mode)
400 : 1 (typical, no ambient light, 2.09-million-color mode)
More than 160˚
Corresponding personal computer signals
Signal mode
Signal Resolution
Vertical
Horizontal Dot clock
frequencies frequencies frequencies frequencies
Hz
MHz
MHz
MHz
640 x 400
70.08
31.47
25.18
640 x 480
59.94
31.47
25.18
640 x 400
72.81
37.86
31.50
Connector: 15 pin mini D-Sub
640 x 480
75.00
37.50
31.50
Format/frequency: R, G, B, H, V/fH: 24 - 80kHz; fV: 50 - 75Hz
800 x 600
56.25
35.16
36.00
Level/impedance: R, G, B = 0.7Vp-p/75Ω
800 x 600
60.32
37.88
40.00
Synchronization: H/V separate sync.: TTL, H/V composite sync.: TTL, G sync.: 0.3Vp-p
800 x 600
72.19
48.08
50.00
Connector: BNC x 5
800 x 600
75.00
46.88
49.50
Format: video or S-video (NTSC/PAL/SECAM)
1024 x 768
60.00
48.36
65.00
Level/impedance: 1.0Vp-p/75Ω
1024 x 768
70.07
56.48
75.00
Synchronization: Composite sync. signal
1024 x 768
75.03
60.02
78.75
Connector: RCA pin x 1, S terminal x 1
1280 x 1024
60.02
63.98
108.00
30.24
Format/frequency: R, G, B, H, V/fH: 24 - 80kHz; fV: 50 - 75Hz
VGA
Level/impedance: R, G, B = 0.7Vp-p/75Ω
Synchronization: H/V separate sync.: TTL, H/V composite sync.: TTL, G sync.: 0.3Vp-p
Analog (PC) RGB 2
Video 1 composite
Video 2 component
Audio
3.9"
200-240V
3 inputs
640 x 480
74.55
35.00
Level/impedance: Y = 1.0V; PB/CP, PR/CR = 0.7Vp-p/75Ω
832 x 624
74.93
49.73
57.28
Synchronization: Weighted on Y signal
1024 x 768
56.42
60.24
80.00
Format: Y, PB, PR or Y, CB, CR
Apple
Connector: RCA pin x 3
* Due to the interpolation necessary for the operation of digital
Stereo signal supplied with video 2 input and RGB 1 input: L/R 470mV high impedance
display devises such as PDP at full screen, it is recommended
that display monitors utilize the native resolution (1024x768 for
CMP307XU) capabiliy of the panel and are operated at their
optimal resolution when text or fine lines are being viewed.
Connector: RCA pin (L/R) x 3
Control terminal
VESA
Connector: 8 pin mini DIN
Signal output
Speaker output
Controls
Switches/Buttons
2W + 2W (built-in 3.9" x 1.2" speakers x 2)
Main Power switch, Sub Power button
Adjustment buttons (Input Changeover, Adjustment Menu, Selection, Sound Volume Adjustment)
Main adjustment
Video signal
RGB signal
Contrast, brightness, color, color tone, sharpness
Contrast, brightness, display size, vertical position, horizontal position,
clock frequencies, clock phase
Audio signal
Remote control
Power management
Volume, balance, high, low, mute
Infrared remote control unit provided
VESA DPMS, International ENERGY STAR® compliant
Environmental conditions
Temperature
Humidity
Operating temperature: 5 - 35˚
Regulations
Safety
EMI
UL1950, CSA C22.2 No.950
Operating humidity: 20 - 80% (non-condensation)
FCC class A
Supplied accessories
Table stand, AC power cable (L = 5' 11"), interface cable (D-Sub 15P connector; L = 5' 11"),
infrared remote control unit (2x AA batteries included), user manual
Hitachi America, Ltd.
Computer Division
2000 Sierra Point Parkway, MS: 760
Brisbane, CA 94005-1835
Tel. (800) 225-1741
Fax. (650) 244-7776
* When a plasma display is turned on, minute dots light
up on the screen. Please be aware that in some parts
of the screen, dots may not light, while in other parts
dots will always light. This is normal and is not a
malfunction.
* Color tone of actual products may differ from those
shown in this catalogue.
* Do not install these products in areas subject to
vibrations as this can interfere with proper operation of
the product.
* To prevent overheating of the plasma panel an air
cooling system is used. To assure proper operation of
this system, the plasma display should be installed and
operated in a vertical position. If the display is installed
horizontally or at an excessive angle, heat
may not be effectively dissipated and overheating could
occur. This could lead to a malfunction.
* If a stationary pattern is displayed on a plasma display
for a long time, differences in brightness and color
might result between the lit, stationary pattern area and
the non-lit area in the monitor surface (burning).
Running a screen saver program is recommended to
preserve monitor display quality if a stationary pattern
is to be displayed for extended periods of time.
All brand names and product names are trademarks, registered trademarks or trade
names of their respective holders.
Design, specifications and product offerings are subject to change without notice.
Web Site: http://www.hitachi.com
For information on other Hitachi products: 800-HITACHI (800-448-2244)
© 2000 Hitachi America, Ltd. All rights reserved.
Printed in USA. DS.PFam.0600
Download PDF