hd ir camera watch user`s manua

HD IR CAMERA WATCH
USER’S MANUA
z Profile
This product is the world's first high-definition infrared camera watch, and has waterproof features. The design
and manufacturing accord with to 3 degrees waterproof standards (waterproof to 30 meters) related technology,
but because of the special structure of this product, this does not mean you can wear the product when diving for
underwater video recording, also can not guarantee that this product won’t have seepage under water pressure
and maintain normal work, all the waterproof design of the product just to avoid a small amount of liquid or dusts
flying into the product inside the case and damage the product, so it can not be placed in underwater to work, and
you may need guidance in strict accordance with the instructions to use the product, if the product damaged
causing by improper use, we will not provide warranty and after-sales service for this product.
z
Before use please read the following:
This product of ability for playing its waterproof, you need to strictly abide by the following methods:
z
The nut, A:MIC1 and the nut,B:MIC2 are microphone hole nut, the height of them are same.
z
The nut A, MIC1 is with a hole in the center of the nut (the following picture), it is for transmit the
sound. If the environment permits, please use this nut. When you take the video, the equipment
also can record the sound.
z
The nut:MIC2 is without the hole, but it is with a rubber fitting inside which can anti-water, When it
is in the humidity or dust environment, please use this nut. But when you use this nut, the
equipment can not record the sound.
z
Please tighten the nuts when you use the equipment.
z
Before use the nut, please check if the rubber is inside the nut. If not, please change the new one.
Picture1
THE NUT STRUCTURE SHOWED AS FOLLOWING PICTURE:
Picture2
The following Spare Parts introduction showed as the picture3
Introduction
Picture3
A、MODE SWITCH
B、MODE INDICATOR
C、IR/MODE
D、TIME ADJUST E、USB PORT G、IR INDICATOR F、MICROPHONE HOLE H、LENS
OPERATION INTRODUCTION
z
This product is the world's first high-definition night vision and infrared camera watches, digital camera, take
pictures, audio recording function with the watch, it is a simple, small and exquisite, beautiful and
practical, easy to carry features, business, education, security, media , justice, tourism, health care,
utilities and other fields of life, by the majority of users.
z
z
Parts Description:
1.1 LED Description: B is a status indicator , blue lighting for
and blue light both
z
video mode ; red lighting for
camera mode; red
lighting for only voice recording mode
1.2 Button description: A key used for turn on, shutdown, camera, and pause.
C used in video mode, camera
mode, voice recording and infrared enabled.
z
1.3 Socket Description: USB socket E, it is for connecting computer or charger, data transfer, charging, and l
power supply port.
z
1.4 microphone and camera:
microphone G, used to pick up audio; HD camera H, used to pick up video.
z
1.5 Timing handle: handle timing D used to adjust the time of watch.
z
III
z
Read them Before using
z
Recommendation: please connect the data cable to watch first, and then connect to the computer.
z
This product is made of precision electronic components
operating instructions
:
when operation please do not touch strongly action in
order to prevent damage to keys, if not read disk, please take the USB plug out
lighting
z
a little red when blue
can be connected to the computer.
Reset function is available, such as the crash occurred, please press the A button and C button at the same
time to reset watch.
z
Use PC CAMERA (video webcam) function, please install the webcam driver which in the CD, and keep the
watch working when connect the computer.
z
1, video operation: Press A key for about 2 seconds, after the red and blue dual-lamp light flashing blue lighting
directly into the video mode. Short time press the C key, blue light flashing start
while
videoing , video, press double A consecutive
videoing, blue flashing
to stop recording and automatically saved video.
And watch turn standby mode, press A again to restart recording.
z
2, IR LED on / off: When the camera into the normal state of the machine, pressing C key until the red light
flashes 3 times, then the machine become in infrared camera. Then press C button once, the blue light
flashes 3 times. IR camera light off become normal mode.
z
3, camera operation: When the machine into the camera mode, press twice A button , the blue lighting
standby mode, then press C , the indicator light become red, pressing
into
A button while red light flashes
Once, take a photograph and saved successfully .
z
4, separate voice recording: When the machine into the camera mode, press twice A button ,
the standby mode, then press C key
once,
z
blue lighting into
the indicator light is red and blue lighting, pressing
A button
the red and blue lights start flashing alternately . That shown watches work in voice recording.
Note: The camera built-in high-capacity polymer lithium battery, no memory effect, can be used with the charge
when you want, but the initial use of the first five, and then charge the battery to run out of capacity, to
start the battery maximum capacity, access to standard working time.
z
5,U disk and net webcam: in the organs of local state of the computer through the USB cable and good
connections in my computer a "removable disk" drive, U disk to use the machine as. In the machine
turned on the computer through the USB cable and a good connection, my computer will appear
Standard Camera, the machine used as a webcam.
z
Another: differences according to computer configuration or system, the computer can not detect a camera
function, if the occasional computer can not enter into the camera function and a removable disk,
remove the camera and the camera connected to a computer re-boot ; If you are the first to use the
camera on your computer, computer camera, install the CD-ROM or dealers inside the camera driver;
To avoid equipment damage, when you are ready to connect the device to your computer, please first
the supplied data cable to the camera, then connect the other end of cable to your computer.
z
6, set recording time: the camera provides
recording time in video which is displayed in
format: year - month
- day hour: minutes: seconds, set the time as follows:
z
Connected the watch to computer by USB cable well. , in my computer has a “removable disk” drive. open the
notebook of windows
(*. txt format) Input: 2012.01.24 13:30:30 Y
z
Take the file name: time.txt
z
Save the file in the root directory of the removable hard drive,
reboot watch and
then the USB cable connection cut off, then
start recording, video and photographs of the time in bottom right corner is the
new time and date
z
7, a removable disk: in the off state or standby state, you can connect the computer at this time, the computer will
eject the removable disk logo, image file directory is: * plate \ _DCIM \ 100DSCIM;; need to uninstall the
camera, please click lower right corner of the taskbar icon mobile device management, in which the
removable storage device unloaded until the system recognizes the hardware can be safely pulled out,
then disconnect the camera and the computer.
z
Note: According to the differences in computer configuration or system, identifying the removable disk will be
slightly different, please be patient, this period is best not to carry out the operation of the camera, so
the impact on computer recognition hardware. If the time is not recognized to a removable disk, try to
re-insert, if still does not recognize the hardware, make sure your operating system, motherboard
drivers, USB interface cable are all normal; please uninstall the hardware in accordance with standard
procedures, so as not to damage the computer or camera. To avoid equipment damage, when you are
ready to connect the device to your computer, first the supplied data cable to the camera, then connect
the other end of the data cable to your computer
z
z
8, exception handling:
Insufficient storage space camera will blink blue and red light at the same time about 5 seconds,
automatically save the current image file and shut down. If you want to continue to use the camera in
the desired image file on the computer back up and delete the memory of the old files to free up enough
storage space;
z
Camera battery is low margin, will turn blue light and red light flashes about 5 seconds, automatically save
the current image file and shut down. If you want to continue using the camera, charge the battery;
z
Improper operation of the camera due to accidental or other special reason to stop responding, you can
press the mode button and open the key, to reset
z Parameter
Item
Parameter
VIDEO FORM
AVI
Video Coding
M-JPEG
Resolution
1920*1080
Player Software
Operating systems or mainstream movie playback software
Picture Format
JPG
Image Scaling
4:3
Support System
Windows me/2000/xp/2003/vista;Mac os 10.4;Linux;
VOL
DC-5V
Interface-type
Mini
Memory Card Format
Nand flash
Battery
High-capacity polymer lithium battery
USB
z Notice
„
Work place: It is only for legal place.
„
Battery: You need to charge it after it does not work for long time.
„
File safety it is not the professional memory card, so it can not instead of professional memory card
completely. You need to keep back-up.
„
Video quality: It is not the professional video equipment, so it can not instead of professional Video
Equipment completely.
„
Working temperature: 0—45°C, it is better to use in the room temperature.
„
Working humidity:20%-80%, it is with waterproof function .Before you enter into the waterproof status, do
not put it into water or humid place.
„
I luminance: Please to use it in the luminous place.
„
Cleanliness: it is better not to use it in the dust place.
„
Other items: It can not use in the high magnetic fields; uniform electric field .It can not be stroked, quick
hardly.
„
Notice: Please contact the local sellers if you need any other more information or help.
Download PDF