2M-701E-PD/af Single Port PoE Splitter/af

2M-701E-PD/af
DESIGNED FOR LIFE
Single Port PoE Splitter/af
2M-701E-PD/afProduct: PoE Splitter
Model: 2M-701E-PD/af
Description: This is a PoE Ethernet & power splitter device which is based on IEEE802.3 af, it can work with PoE
power supply device (such as PoE switch) which meet the IEEE802.3af standard and provide the network and
power for the device which can not support PoE. This product is widely used in security surveillance and network
engineering.
【Certification】
【Features】
1. Power Supply: Compatible with mode A (End-Span) and mode B(Mid-Span);
2. Standard: IEEE 802.3 af, IEEE 802.3, IEEE 802.3u;
3. Power Output: DC5V, DC9V, DC12V optional;
4. Appearance and Structure: Compact size, easily install;
5. Operation: Plug and play, no need settings.
【Specification】
Item
Protocol
Power Supply
Power Consumption
Input Voltage
Output Voltage
Output Ripple
Ethernet Port
Transmission Speed
Ethernet Port
Transmission Medium
Transmission Distance
Input PoE Power Indicator
LED Status Indicator
Output DC Power Indicator
PoE Power Supply
Protection
Environmental
Mechanical
Stability
【Connection】
ESD
Working Temperature
Storage Temperature
Humidity (non-condensing)
Dimension (L×W×H)
Material
Color
Weight
MTBF
Description
IEEE803.2af
Compatible Mode A (End-Span) and
Mode B (Mid-Span)
≤13W
PoE 36V-57V
DC5V, DC 9V, DC 12V Optional
<5%
1×RJ45 Input
10/100Mbps
Cat5/5e/6 Standard Network Cable
100m (Maximum)
1 (POE IN Port RJ45 Yellow Light)
1 (Ethernet Port RJ45 Yellow Light)
1a Contact discharge Level 3
1b Air discharge Level
Per: IEC61000-4-2
0℃~45℃
-40℃~70℃
0~95%
80mm×55mm×28mm
Plastic
Black
65g
>30000h
【Application】
【Installation Steps】
1) Please turn off the signal source and the device's power, installation with power on may damage the device;
2) Use a network cable to connect the PoE switch, and connect the other side with the splitter's PoE IN port;
3) Use another network cable to connect the IP camera with the PoE splitter's ethernet port;
4) Connect the DC power line with the splitter's DC port, and connect the other side to the IP camera's power
port. Adjust to the proper voltage, DC 12V for example;
5) Check if the instSingle Port PoE Splitter/af
6) Make sure all the network devices have power supply and they are working normal.
【Scenario】
1. Office System
2. Townhouse
【Accessories】
1. Single Port PoE Splitter 1pc
2. DC Power Line 1pc
3. User Manual 1pc
2M Technologies Co., Ltd.
802 Greenview Dr Ste 100 ,
Grand Prairie TX 75050 USA
Tel: +1 972-206-1212
Email: sales@2Mtecnology.net
www.2mtechnology.net
Download PDF