Active VGA+Audio Over Cat5 Extender Manual

Active VGA+Audio Over Cat5 Extender Manual
CAT5 VGA Video Extender extends video signals up to 300 meters (1000ft) using inexpensive CAT5
/ CAT6 UTP cable.
A video extender consists of both a transmitter and receiver. The transmitter connects to your local
video source and allows you to extend to a single remote receivers. Cat5 component video extender
via Cat5 is the ideal solution for applications to display the same image on remote locations.
These AV extenders are commonly used at restaurants, bars, clubs and other HDTV environments
for video broadcasting such as remote monitoring, presentations and advertising.
Active VGA+Audio Over Cat5 Transmitter
Features:
1.Transmission Distance up to 1000ft / 300m when used with Receiver
2.VGA video & audio signal transmission via single UTP cable (CAT5 / CAT5e)
3.350 MHz signal transmission bandwidth
4.With local VGA & audio outputs
5.12V DC Switching power supply included
6.Distance via CAT5 Cable:
640*480 pixels
(VGA)—300M
800*600 pixels
(SVGA)—200M
1024*768 pixels
(XGA)—180M
1280*1024 pixels (SXGA)—120M
1600*1200 pixels (UXGA)—100M
Active VGA+Audio Over Cat5 Receiver
Features:
1.Support 2X VGA+Audio Distribution Amplifier
2.EQ(Sharpness) and GAIN(Brightness) control are Adjustable
3.VGA & Audio signal transmission via single UTP cable (CAT5 / CAT5e)
4.12V DC Switching power supply included
5.Distance via CAT5 Cable:
640*480 pixels
(VGA)—300M
800*600 pixels
(SVGA)—200M
1024*768 pixels
(XGA)—180M
1280*1024 pixels (SXGA)—120M
1600*1200 pixels (UXGA)—100M
Download PDF