Gira door communication In the switch range style

Gira door communication system
The system for every application:
single- and multi-family buildings
surface mounting or flush mounting
integration into its own system and
systems from other manufacturers
audio and video functions
high-quality and vandal-proof
inside and outside
Gira door communication
In the switch range style
The Gira door communication system.
The Gira surface-mounted hands-free feature home station.
2
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 1
The Gira surface-mounted handsfree feature home station is prefabricated and ready to connect
for fast, easy, clean installation
on walls and has a very low height.
Advantages:
Uniform appearance with the
electrical installation
Large variety of designs
Operation is carried out via four
push buttons, and communication
via an intelligent hands-free speech
function. This offers excellent voice
reproduction quality – comparable
to the outstanding level of speech
comprehension provided by modern hands-free systems in cars.
Another advantage: The Gira surface-mounted hands-free feature
home station has no receiver which
could be ripped off or fall due to
careless handling. It’s also made
of shatter-proof material. This
reduces the need for spare parts
and the corresponding frustration
to almost nil.
Low height of just 20 mm
Fast, clean installation
Convenient, voice-controlled
talk-back with no bothersome
receiver cables
Excellent speech quality
Connections for 2-wire bus and
floor-call button
The home station can be installed
either as a base unit without a cover
frame or in the 2-gang cover frame
without a crossbar from the Gira
Standard 55, Gira E2, Gira Event
and Gira Esprit switch ranges.
Installation in the switch frames
enables perfect integration
in the design of the electrical
installation.
Call acceptance
Door opener
Staircase
lighting
Calling tone off,
volume control
Design of surface-mounted hands-free feature home station: Phoenix Product Design, Stuttgart
Surface-mounted
hands-free feature home
station, Gira Standard 55,
pure white glossy
Rocker switch,
Gira Standard 55,
pure white glossy.
20 mm
16,3 mm
3
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 2
The Gira surface-mounted
hands-free feature home station.
The surface-mounted hands-free
feature home station has the handy
size of modern mobile phones and
a height of just 20 mm. In addition,
it can be mounted on the wall as a
base unit without a cover frame in
next to no time. It is operated via
four translucent operating buttons
with LED backlighting for status
indication.
The base unit is available in the
colours pure white matt, pure
white glossy, cream white glossy,
anthracite and aluminium.
With voice-controlled talk-back, the
hands-free speech function offers
an especially convenient, troublefree form of communication.
As a result, communication is
possible even at a greater distance
from the home station and the
user's hands remain free.
Echo compensation and background noise suppression ensure
the highest voice-reproduction
quality.
+
Surface-mounted
hands-free feature
home station as a
stand-alone base unit
without a cover frame.
Steps for the installation of
a home station with cover
frame.
Surface-mounted
hands-free feature home
station in 2-gang cover
frame without crossbar,
Gira Esprit, glass mint.
1.
Place the 2-gang cover
frame without a crossbar
on the wall. Then insert the
mounting plate into the
cover frame and secure
it to the wall with two
screws.
1.
2.
Connect both wires of
the Gira 2-wire bus to the
plugs.
3.
Attach the plug on the
rear of the home station
to the PCB. Then set the
top section on the mounting plate, press on it and
engage it.
2.
3.
4
The use of a cover frame
enables optimal covering
of messy installation
conditions or an existing
flush-mounted box.
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 3
In conjunction with a 2-gang
frame without crossbar from the
Gira Standard 55, E2, Event and
Esprit switch ranges, the design
of the Gira surface-mounted handsfree feature home station can
be exactly matched to the rest of
the installation next to the door.
Due to the large variety of the
available switch frames, the
Gira surface-mounted hands-free
feature home station is available
in more than 40 different design
variants.
Surface-mounted
hands-free feature
home station,
pure white glossy.
Surface-mounted handsfree feature home station,
Gira Standard 55,
pure white glossy.
Surface-mounted handsfree feature home station,
Gira Event, opaque blue/
pure white glossy.
Surface-mounted handsfree feature home station,
Gira E2,
pure white glossy.
Surface-mounted handsfree feature home station,
Gira Esprit, glass mint/
pure white glossy.
5
Push Switches
Gira Esprit wenge wood/colour aluminium.
Gira home station standard with receiver and colour TFT display.
Gira Esprit wenge wood/colour aluminium.
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 4
The Gira door communication system.
6
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 5
Another function in the switch range.
Blind control buttons
Continuous regulator
1-gang push button sensor
Push button sensors 2plus
Instabus info display 2
Automatic control switch
Electronic blind control
SCHUKO socket outlet
Series switch
Wall lights
Flush-mounted radio
7
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 6
The Gira door communication system simply expands the functionality of the Gira switch ranges and
turns the door intercom system
into a permanent part of the switch
installation. That's because the
functions of the Gira door communication system can be integrated
in existing Gira design platforms.
The Gira door communication system.
Integration in the Gira System 55.
The Gira home stations are based
on the Gira System 55 modular
product concept:
All inserts fit in the cover frame
of the Gira Standard 55, Gira E2,
Gira Event and Gira Esprit switch
ranges. In addition, the home
stations for flush-mounted installation can also be integrated
in the cover frames from the
Gira Stainless-Steel range.
That enables the Gira home
stations to be installed in the
same design as, for example,
switches and socket outlets,
and finally ensures a uniform
appearance of the door communication and electrical
installation systems.
In addition, it keeps the product
line lean, which reduces the
necessary effort and costs for
ordering, order processing and
stock-keeping.
Advantages:
Uniform design of door communication and electrical installation
Inserts of hands-free
feature home station,
pure white glossy/
transparent white.
Door communication and other
functions can be combined in
a shared cover frame with the
flush-mounted versions
Large design variety with
simultaneous lean product range
Hands-free feature
home station,
Gira Standard 55,
pure white glossy.
8
Hands-free feature
home station,
Gira Event, opaque blue/
pure white glossy.
Hands-free feature
home station,
Gira E2,
pure white glossy.
Hands-free feature
home station,
Gira Esprit, glass mint/
pure white glossy.
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 7
In addition, due to their integration
in the Gira switch ranges, the
Gira home stations are also available in a wide variety of designs.
Whether with the convenient
hands-free speech function or a
receiver – each Gira home station
is available in more than 40 different design variants with an unusually large variety of shapes, colours
and materials.
If a different design is desired
later, Gira home stations can be
upgraded by simply replacing
the cover frames.
1.
Gira Standard 55
home station standard
with receiver,
pure white glossy.
2.
Gira E2 home station
standard with receiver,
colour aluminium.
3.
Gira E2 home station
standard with receiver,
anthracite.
1.
4.
Gira Event home station
standard with receiver,
opaque amber/
pure white matt.
2.
3.
5.
Gira Event home station
standard with receiver,
opaque blue/
colour aluminium.
6.
Gira Event home station
standard with receiver,
colour aluminium/
anthracite.
4.
5.
6.
9
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 8
The Gira door communication system.
The technology concept.
The technology concept on which
the Gira door communication system is based is characterised by
reliability, flexibility and a guaranteed future.
The system is based on an intelligent 2-wire bus with which modifications can still be carried out
later without problems.
Advantages:
Installation as accustomed for
the electrical installation in 58 mm
flush-mounted boxes
The home station and door station
are also available as ready-toconnect surface-mounted variants
Fast, simple installation of the
surface-mounted versions
Signal transmission for audio
and video via the 2-wire bus
Non-interchangeable installation
Easy retrofitting of an existing
doorbell system
Simple replacement of an existing
intercom system
Low cabling effort and expense for
new installation, as only two wires
are required
10
43879_FI_TKS_Seite_03_11 07.10.2005 16:13 Uhr Seite 9
High-tech in a compact design.
The developments in technology
have lead to a miniaturisation
of the devices and products in
many sectors, e.g. mobile phones,
cameras and electronic blocks.
The Gira door communication
system uses these developments
for the area of door intercom systems and offers state-of-the-art
technology that is so small, it
fits in a 58 mm flush-mounted
box and in extremely flat surfacemounted housings.
That means: The Gira home
and door stations with the handsfree speech feature can both
be installed in common 58 mm
flush-mounted boxes in the wall
and mounted by means of a
pre-assembled unit on the wall.
Audio and video via
just two wires.
Only two lines are required to
supply the components of the
Gira door communication system
with voltage and to transfer all
the audio and video signals.
This means that, for example,
an existing doorbell system can
easily be replaced by the Gira door
communication system. Instead
of laying new lines, the existing
lines of the current system are
simply used.
In new installations the 2-wire
bus technology reduces the usual
cabling required for a door intercom
and allows rapid non-interchangeable installation.
Gordon Smith
11
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 1
The Gira door communication system.
The Gira flush-mounted home stations.
12
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 2
All versions of the Gira home
stations for flush-mounted installation have a modular design:
Their individual functions are
installed in a cover frame of the
Gira Standard 55, E2, Event or
Esprit switch ranges in 58 mm
flush-mounted boxes in the wall.
With the aid of an intermediate
frame, installation is also possible
in a cover frame from the Gira
Stainless-Steel range.
When expanded with additional
functions, e.g. a colour TFT display,
a larger multi-gang cover frame
and additional 58 mm flush-mounted boxes are required.
The flush-mounted inserts and
the door-communication bus
coupler of these home stations
are connected with flat ribbon
cable. Only one door-communication bus coupler is required
per home station – even with
an expansion. A floor-call
button can be connected to it if
necessary via screw terminals.
Advantages:
simple expandability due to modular design
uniform appearance with electrical
installation due to integration in
the Gira switch ranges and in the
module function profile
large variety of designs
cover frames made of shatter-proof
thermoplastic with high resistance
to ultraviolet light and a scratchresistant, care-free surface
Operating buttons available in
transparent mint or transparent
white
+
Design of home station inserts: Phoenix Product Design, Stuttgart
Base function
e.g. hands-free feature
home station,
aluminium/transparent
colour white,
Order No. 1280 126.
+
Expansion function
e.g. colour TFT display,
colour aluminium,
Order No. 1286 26.
=
3-gang cover frame,
e.g. Gira E2,
colour aluminium,
Order No. 0213 25.
Gira hands-free feature
home station with
colour TFT display,
inserts: aluminium/
transparent white,
frame: Gira E2,
colour aluminium.
13
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 3
The Gira flush-mounted home stations.
The base units.
+
+
Hands-free feature
home station and
2-gang cover frame,
Gira Esprit, glass mint.
+
Home station standard
with receiver and
2-gang cover frame,
Gira Esprit, glass mint.
Home station comfort
with receiver and
3-gang cover frame,
Gira Esprit, glass mint.
The base.
The Gira hands-free feature home
station is equipped with a loudspeaker with a microphone and
a 3-gang operating button for the
functions call acceptance and
enforcing of voice traffic in case
of loud background noises, door
opening, switching light, activation and deactivation of call tone,
as well as regulation of call tone
and speech volume.
The Gira home station standard
with receiver is equipped with
a 1-gang operating button integrated in the receiver mount for
switching the light, opening the
door and regulating the call tone
volume.
Next to the receiver, the
Gira home station comfort offers
a 3-gang operating button for the
functions opening door, switching
light, activation and deactivation
of call tone and regulation of call
tone and speech volume.
Note: For the switching light
function the switching actuator
of the door communication
system is also required.
14
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 4
The Gira flush-mounted home stations.
The expanded devices.
+
+
Hands-free feature
home station plus
colour TFT display and
3-gang cover frame,
Gira Esprit, glass mint.
+
+
Standard home station
with receiver plus colour
TFT display and 3-gang
cover frame, Gira Esprit,
glass mint.
The expansion.
In conjunction with a larger
cover frame and an additional
58 mm flush-mounted box, any
of the three Gira home stations
for flush-mounted installation
can, for example, be expanded
with the video function.
For this purpose, the 1.8“ colour
TFT display is used. As the video
signal transfer also takes place
via the 2-wire bus, this expansion
is also possible at a later time.
Note: The use of a video control
device is required for upgrading
the video function.
15
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 5
The Gira flush-mounted home stations.
The base functions.
The Gira home stations for
flush-mounted installation enable
a free choice between modern
hands-free feature, comparable
with today's mobile phones, and
the classic variant with a receiver.
Here the hands-free speech function with its convenient operation
is becoming increasingly popular:
With a technical new development
the conversation can take place
without a button having to be
pressed and held.
Whether with the hands-free
feature or a receiver – the
Gira home stations convince
with optimised audio technology and can be expanded
with additional functions.
The hands-free feature.
The receiver.
The practical hands-free feature of
the Gira home station offers excellent speech quality comparable to
that familiar from mobile phones
and modern hands-free units in
cars.
The receiver compresses demanding technology into a small
space and achieves the compact
design of a mobile phone with
simultaneous excellent speech
transmission quality.
As a result, the loudspeaker
with an integrated microphone
achieves an outstanding level of
speech comprehension for voicecontrolled talk-back with echo
compensation and suppression
of background noises.
The receiver is combined with a
magnetic receiver mount, which is
equipped with an integrated cradle
for accepting or ending calls.
If the ambient noises at the door
station are too loud, the user
can enforce his/her contribution
to the conversation by means of
an enforcement function. This can
be activated with the operating
button. In addition, the operating
button is also used for call acceptance, volume control of the call
tone and voice reproduction, for
opening the door, activating and
deactivating the call tone and, in
conjunction with the switching
actuator, for switching the light.
The operating button is available
in transparent mint or transparent
white.
16
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 6
The Gira flush-mounted home stations.
The expansion functions.
Separate flat
The TFT colour display.
The 1.8“ colour TFT display enables
one to see from the inside who is
outside in front of the door. It is
activated automatically as soon
as someone rings, but can be
activated manually at any time.
The display is equipped with
LED background illumination and
a resolution of 557 x 234 pixels
– comparable to the high-tech
displays of the latest digital cameras and camcorders. The TFT technology ensures that colour distortion does not arise – even with
a slanted angle of view of the
display.
The activation button can furthermore be used to switch over from
one connected camera to a maximum of three further ones. The
currently switched-on camera is
shown in the display.
The display is adjusted by means
of a cursor key and menu control.
This means that e.g. the brightness, contrast and colour intensity
can be set by text presentation,
as with modern camcorders of
television sets.
The call button for in-house
calling or switching functions.
The TC-gateway.
With the Gira TC-gateway the
Gira door communication system
can be integrated in the existing
telephone system. It enables call
acceptance and control of the
door opening via a local, wired
or mobile telephone. The door
call can also be forwarded to programmed telephone numbers.
The call button be used to call from
one home station to another one
in the house, e.g. from a home
station in the attic to the hobby
cellar.
The call button can, for example,
also switch lights in combination
with a switching actuator.
The Gira TC-gateway distinguishes
between an outside call and a door
call and makes this clear with the
calling tone in exchange mode.
In addition, it supports the call
waiting function during an existing
outside call when someone rings
at the door.
The surface of the call and operating button is finished by means of
the in-mould process, resulting in
a high degree of robustness, high
resistance to ultraviolet light and
excellent resistance to scratching
and shocks.
The call button is available in
transparent mint or transparent
white.
The inscription service.
The surface-mounted gong.
The Gira inscription service
provides professionally designed
inscription of the call buttons.
Ideally suited for notification
in out-of-the-way rooms: The
Gira surface-mounted gong
signals both acoustically and
via LED when someone rings
at the door. Different call tones
signal whether it is a door call,
an internal call or a floor call.
It prints the inscription labels
according to your personal specifications. Quick, simple processing
is possible: A postcard for this
purpose is included with the
call buttons. This is filled out and
returned to the Gira inscription
service. The personal inscription
label will be sent back
immediately.
In addition, the inscription
can also be produced with the
optionally available inscription
software and the accompanying,
pre-stamped inscription sheets.
1.
2.
3.
Achim Steinmetzler
Via the operating buttons,
the ringing tone melody at the
Gira surface-mounted gong
can be selected from up to five
different ringing tone melodies,
the ringing tone can be switched
on or off and the volume of the
ringing tone can be regulated.
The operating buttons feature
integrated LEDs for status indication.
5.
4.
12 V AC
6.
7.
1.
2.
3.
4.
5.
6.
7.
Gira home station
Telephones inside the house
Public telephone network
Gira door station
Gira TC-gateway
Door opener
Gira audio control device
The Gira surface-mounted gong is
completely pre-assembled and can
be installed quickly and cleanly via
pull-off screw terminals.
17
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 7
The Gira flush-mounted home stations.
Integration in the modular function profile.
1
Light
2
Dialog radio
door module
Hands-free feature
home station with
colour TFT display
in 3-gang empty unit
Push button sensors,
automatic switch
in 3-gang empty unit
SCHUKO
socket outlet in
1-gang empty unit
Especially at central locations
and next to front doors, there is
a demand for a wide range of
functions. Up until now these
have been installed distributed
non-uniformly on the wall (Fig. 1).
Here the module function profile
from Gira now offers you a fascinating, complete solution: The
flush-mounted Gira home stations
can be integrated in it and combined with a broad range of other
functions to form an attractive
unit on the wall, for example,
with a special Gira light, the radio
controller from the Gira radio bus
system and the Dialog glass radio
door module from the Gira radio
alarm system (Fig. 2).
As the basis an installation profile
is screwed onto the wall and the
Gira home station is installed in an
empty unit of the modular function
profile, which is then secured in
the installation profile. Additional
functions from the Gira System 55
can be integrated by this method.
The distances between the modules are bridged with blind cover
plates.
With the aid of a special mounting
frame, the entire devices and
empty units can also be installed
individually on the wall.
The modular function profile
can also easily be reused after
remodelling or relocating.
18
Gira hands-free feature home station with additional colour TFT display.
Integrated in the Gira modular function profile.
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 8
19
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 9
The Gira door communication system.
Good reasons for home construction.
Advantages:
Long service life thanks to
receiver-free and shatter-proof
home stations
Low costs and minimal expenditure thanks to quick, easy and
clean surface-mounted installation
Uniform appearance of the entire
installation via integration of the
home stations into the Gira switch
ranges
Individualised design options via
integration into a home station in
a host of different switch frames
The Gira door communication
system offers economical and
easily upgradeable solutions for
the modernisation and renovation
of existing buildings, e.g. the
Gira surface-mounted hands-free
feature home station.
Surface-mounted
hands-free feature
home station,
Gira Standard 55,
pure white glossy
It is especially affordable, easy
to install and does not have a
receiver which could be damaged
by being pulled out or a retainer
which could be damaged. This
ensures a long service life and reduces the requirement for spare
parts to almost nil. In addition, it
can be perfectly matched to the
rest of the electrical installation
via integration into the Gira switch
range.
Gira is thus expanding the product
range for upgrading modern living
comfort and now offers complete
technical building outfitting for
home construction: from upgradeable door intercom systems to
light, blind, heater, power supply
and security equipment controllers
which can be installed at a later
time.
This enables a new quality of life
in home construction for all age
groups up to senior citizen communities.
Rocker switch,
Gira Standard 55,
pure white glossy.
20
Automatic control switches in
the style of door communication
equipment.
In addition to the Gira home
stations, there are also automatic
control switches in the style of the
Gira switch ranges are also available. They switch the light on in
stairwells, cellars, entrance areas
etc. as soon as they detect movement and switch them off again
when no one is around. This is
convenient for tenants and reduces
power consumption.
Gira automatic control switches
can be installed in existing buildings without great expenditure:
Existing light switches can simply
be replaced by automatic control
switches.
If automatic control switches are
also to be mounted in addition
to existing light switches, we recommend using battery-powered
Gira radio automatic control
switches. They do not require
a power connection and can be
adhered or screwed on anywhere.
43879_FI_TKS_Seite_12_21 07.10.2005 16:56 Uhr Seite 10
Gira also offers economical and
individualised solutions for outdoor door intercom systems,
which can be upgraded quickly
and easily in existing housing
units.
More information is provided
on the following pages.
Panic switch
Heating controls in the style of
door communication equipment.
Blind controls in the style of door
communication equipment.
For convenient heating control in
individual rooms, the Gira switch
ranges offer room temperature
controllers with an adjustment
wheel or electronic time delay
switch.
A variety of control devices in the
style of the Gira switch ranges are
also available for controlling blinds
and shutters; from a simple blind
switch with a knob to control
buttons to electronic blind control.
They are compatible with the
connections of electronic heating
regulators from other manufacturers and can replace them as part
of a modernisation project. A previously existing standard device
can be replaced by a higher-quality
Gira controller with a clock, for
example. Times at which the desired room temperature is to be
reached can easily be set with it.
Blinds and shutters can be controlled individually or together in
groups with electronic Gira blind
controllers. This control can be
manual or time- or sensor-based.
Ideal for subsequent installation
are the radio room temperature
sensor and the radio motor valve
drive: All power connection for the
radio room temperature sensor
is needed. The radio motor valve
drive is battery powered and is
simply attached to the heating
valve. It actuates this as soon
as it receives a control command
via radio from the radio room
temperature sensor.
For subsequent upgrading of blind
control, Gira even supplies the
appropriate tube motors.
Radio wall transmitter in the
style of door communication
equipment.
RCD protection socket outlet in
the style of door communication
equipment.
Functions from the Gira radio bus
system are especially well suited
toward the modernisation of existing buildings: Battery-powered
radio wall transmitters for the
control of lights, blinds and other
devices do not require a power
connection and can be adhered
to glass surfaces or screwed to
the wall anywhere in the home .
The residual current protection can
be upgraded in older buildings with
the Gira RCD protection socket outlet wherever an especially great
risk is present: in the WC and
children’s rooms, in the kitchen
and outside. The socket outlets
previously installed are simply replaced by RCD protection socket
outlets.
A radio wall transmitter can be
programmed as a panic switch,
for example, and mounted next
to the bed. At the push of a button,
it switches on all lights in the
home. This provides a sense security when you hear suspicious
sounds at night.
To make the power supply in living
rooms and bedrooms even safer,
socket outlets can be easily replaced with Gira SCHUKO socket
outlets with child-safety feature or
voltage overload protection.
These socket outlets are part of all
Gira switch ranges.
If the Gira radio wall transmitter
is programmed as the central off
switch, it switches off all lights
and dangerous devices in the
home simultaneously at the push
of a button. This provides a sense
of security when you leave your
home.
21
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 1
The Gira door communication system.
Integration in front panels,
letterbox systems and existing systems.
22
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 2
The Gira door communication
system offers intelligent door
station solutions for every application – whether for the one-family
or 30 unit house.
The Gira flush-mounted door stations can be integrated in a broad
range of letterbox systems or in
individually produced front panels
from various manufacturers. These
are available in a wide choice of
design and material variants.
In addition, the Gira door communication system can also be used in
letterbox systems, speech compartments, door-side installations
and front panels with the aid of
the Gira built-in loudspeaker.
As a result, the Gira door communication system offers door station
solutions exactly tailored to the
respective installation area and
customer requirements. The ideal
solution for large buildings with a
large number of residential units.
12
Michael Brown
Ben Cooper
Marc Spencer
Kate Johnson
Claire Miller
Mike Hunter
Frank Miller
Susan Smith
Susan Armstrong
Eddy Clark
Christine Basil
Micheal Smith
Mary Black
Peter Colins
Ann Potter
Stephen Smith
Front panel solution in
cooperation with the
SKS-Kinkel company.
Front building
Gira built-in loud speaker
integrated into the antivandalism door station from
the SKS-Kinkel company
with stainlesssteel front
panel.
Gira flush-mounted
door station with colour
camera and 4 2/3-gang
call buttons integrated
in an aluminium front
panel.
Mary Hutson
Michael Potter
Frank Kelly
Susan Miller
Light
LIght
Michael Potter
Mary Hutson
Susan Miller
Frank Kelly
Letterbox solution in
cooperation with the
Renz company.
Gira flush-mounted
door station with colour
camera and 2/3-gang call
button integrated in a
Renz letterbox system
of model group 14,
front variant aluminium.
Gira built-in loudspeaker
integrated into a letterbox
system from the Renz
company, model group 14,
front variant stainless steel.
Installation solution
also suitable for letterbox
systems of other manufacturers.
23
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 3
The Gira flush-mounted door stations.
Integration in front panels from the manufacturer SKS-Kinkel.
Additional information available
from:
SKS – Kinkel Elektronik GmbH
Im Industriegebiet 9
56472 Hof / Westerwald Germany
Phone +49 (0) 26 61- 93 93 94
Fax
+49 (0) 26 61- 6 30 73
www.sks-kinkel.de In cooperation with the SKS-Kinkel
company, the Gira telecommunication system offers even greater
freedom for designing the Gira
door stations and enables customtailored production for individual
customer requirements for large
residential units.
Flush-mounted
door station with ten
2/3-gang call buttons,
integrated in an
aluminium front panel.
93
The Gira door stations can be
integrated into front panels
with flush-mounted boxes and
surface-mounted housings.
The front panels, made of materials
such as stainless steel, aluminium
and high-gloss, gold-plated aluminium, can be varied in material
thickness and surface depending
on the customer’s wishes. Coloured surfaces in accordance with
the RAL table are also possible.
A special installation profile is used
for integration of the Gira door
station functions into the front
panels. The fastening system enables easy pre-installation in the
workshop or at the construction
site.
24
If desired, the SKS-Kinkel company
will handle pre-assembly of the
Gira door station components.
If only audio functions are used,
door stations for up to 30 parties
can be produced in this way. When
using video functions, production
of a unique door station for up to
18 parties is possible.
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 4
The Gira flush-mounted door stations.
Integration in letterbox systems, e.g. from Renz.
Additional information available
from:
Erwin Renz
Metallwarenfabrik GmbH & Co. KG
Boschstraße 3
D-71737 Kirchberg/Murr
Germany
Phone +49 (0) 71 44 - 301- 0
Fax
+49 (0) 71 44 - 301-185
www.renz-briefkasten.de
Through cooperation with the
Renz company, for example,
Gira flush-mounted door stations
can be integrated as desired in a
variety of letterbox systems for
flush-mounted, surface-mounted
or free-standing installation.
Flush-mounted door station
with 2/3-gang call button and
colour camera integrated in a
Renz letterbox of model
group 14, aluminium.
Michael Smith
Ann White
Light
Michael Smith
Mounting of the installation profile
is easy: Insert the cover plates of
the functions into the front panel,
set the installation profile on the
inside of the front panel and screw
down and then insert the flushmounted inserts of the functions
onto the cover plates.
The housings are available for order
from the Renz company with cutouts, into which the individual
functions of the Gira door station,
such as call buttons, door speakers,
info modules and colour cameras,
can be inserted.
A special installation profile available in 1-gang to 4-gang versions
is used for mounting these functions in the device platforms of
other manufacturers. If no attachment screws are visible and bolts
cannot be set, an adhesion-attachment set is available.
Ann White
25
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 5
Advantages:
The Gira door communication system.
Integration in existing systems.
Integration of the Gira door communication system in a variety of
systems from other manufacturers,
e.g. anti-vandalism door stations
from the SKS-Kinkel company;
existing systems can be expanded/
converted comfortably and
economically
Built-in loudspeaker for use with
up to 8 residential units
Add-on module for use with
12 additional residential units
Cascading of several add-on units
for use with even more residential
units
Colour camera for Gira flush-mounted door station can be connected
With the aid of a built-in loudspeaker and an add-on module, the
Gira door communication system
can also be used in letterbox
systems, speech compartments,
door-side installations and front
panels of well-known manufacturers, such as Renz, JUMetallwaren, SKS-Kinkel and
Normbau, already installed in
the building.
The built-in loudspeaker.
In the process, the built-in loudspeaker acts as an adapter between
the mechanical call buttons of the
existing system and the Gira 2-wire
bus and enables all Gira home
stations to be controlled.
This opens up new applications
for the Gira door communication
system and expands the design
possibilities – whether for retrofitting, conversion or new installations.
The compact, weatherproof builtin loudspeaker with an adjustable
speech volume is screwed in behind the speaker and microphone
covers of the existing systems and
can be connected to up to eight
mechanical call buttons via screw
terminals. When these call buttons
are pressed, the built-in speaker
emits an acknowledgement signal
for confirmation. Polling of the
inputs occurs via alternating
current. This allows trouble-free
long-term operation.
The built-in loudspeaker can be
connected to the colour camera of
the Gira flush-mounted door station
via a connection cable. This is
integrated into a cut-out in the doorside installation or in the front panel
of the existing system, for example.
For integration in the system and
for signal transmission and supply,
the built-in loudspeaker is connected to the Gira 2-wire bus.
26
The add-on module for
built-in loudspeaker.
The add-on module is required
when more than eight call buttons
are to be integrated in the Gira door
communication system.
It provides connections for an
additional 12 call buttons and is
installed in the speech compartment of the system in addition to
the built-in speaker. The installation
of the add-on module is simple
even with narrow speech compartments due to the flat, minimised
design.
The add-on module can only
be used in conjunction with the
built-in speaker and is connected
to it via a 6-pole connection cable.
Up to two add-on modules can be
connected to the built-in speaker
in this way.
43879_FI_TKS_Seite_22_27 07.10.2005 17:27 Uhr Seite 6
Additional information available
from:
SKS – Kinkel Elektronik GmbH
Im Industriegebiet 9
56472 Hof / Westerwald Germany
Phone +49 (0) 26 61-93 93 94
Fax
+49 (0) 26 61-6 30 73
www.sks-kinkel.de Erwin Renz
Metallwarenfabrik GmbH & Co. KG
Boschstraße 3
71737 Kirchberg / Murr
Germany
Phone +49 (0) 71 44 - 301- 0
Fax
+49 (0) 71 44 - 301-185
www.renz-briefkasten.de
Gira built-in loudspeaker
integrated into a letterbox
system from the Renz
company, model group 14,
front variant stainless steel.
Gira built-in loud speaker
integrated into the antivandalism door station from
the SKS-Kinkel company with
stainless-steel front panel.
Holly Baker
Frank Smith
12
The Gira built-in loudspeaker can
be integrated into the anti-vandalism door stations from the
SKS-Kinkel company. In this way,
vandal-proof door stations can be
installed surface-mounted, flushmounted or as door-side installations outside, which can be easily
integrated into the Gira door communication system.
Light
Holly Baker
Frank Smith
They are ideal for the owners of
public buildings and for housing
associations and owners of real
estate, who have greater requirements for the protection of door
stations from damage.
In addition, the Gira built-in loudspeaker also fits into existing doorside installations, front plates and
bell panels from a hosts of companies, e.g. from SKS-Kinkel, and
in letterbox systems with a speech
compartment, e.g. from the Renz
company.
Thus the Gira door communication
system can be upgraded outside
economically without great expenditure.
27
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 1
The Gira door communication system.
The Gira door stations.
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 2
Gira door stations are installed
next to the front door.
They have a modular, flush-mounted design. Their functions are
installed in combination with
a cover frame from the Gira TX_44
switch range in 58 mm flushmounted boxes. Here the basis
is formed by a door speaker and
a call button with door-communication bus couplers to which the
2-wire bus is connected. Gira flushmounted door stations can be
expanded with additional functions,
e.g. with a colour camera. All
inserts and the door-communication bus coupler are interconnected
via flat ribbon cables included with
the devices.
Gira surface-mounted door stations
are pre-assembled and ready to
connect for quick installation on
the wall.
+
+
Advantages:
Shatter-proof, scratch-resistant,
UV-stable and weather-resistant
Theft protection by fixing the cover
frame with Torx screws; optional
increased theft protection by fixing
the frame with Tri-Wing screws
Available in the colours: Pure white
(similar to RAL 9010), anthracite
(lacquered), aluminium (lacquered)
water-resistant in accordance
with IP 44
Flush-mounted variants:
modular design, can be expanded
with additional functions at any
time
Surface-mounted variants:
pre-assembled and ready-toconnect for quick installation
=
Collin Price
Design of door stations: Phoenix Product Design, Stuttgart
Base functions,
e.g. flush-mounted door
station with 1-gang call
button, pure white,
Order No. 1260 66.
Expansion function,
e.g. colour camera,
pure white,
Order No. 1265 66.
3-gang cover frame,
e.g. Gira TX_44,
pure white,
Order No. 0213 66.
Flush-mounted door
station with 1-gang call
button and colour camera,
Gira TX_44,
pure white.
Collin Price
Complete unit,
e.g. surface-mounted door
with station colour camera
and 1-gang call button,
pure white,
Order No. 1269 66.
29
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 3
The Gira flush-mounted door stations.
The base units.
+
The base units.
As base unit for single-family
houses, the Gira flush-mounted
door station is equipped with a
door speaker with a microphone
and a 1-gang call button. This
can be simultaneously controlled
by up to three Gira home stations.
+
Flush-mounted door station
with 1-gang call button
2-gang cover frame,
Gira TX_44,
colour aluminium.
Flush-mounted door station
with 2/3-gang call button
and 2-gang cover frame,
Gira TX_44,
colour aluminium.
As a base unit for single to
three-family houses, the Gira flushmounted door station is equipped
with both a door speaker and a
2/3-gang call button for separate
ringing at three different home
stations. Each call button can
be assigned a total of up to three
simultaneously operated Gira home
stations.
If a call button of the door station
is free, for example in a two-family
home, this call button, in combination with the switching actuator,
can assume a switching function,
e.g. switching a light. However,
it can also be covered with an
optionally available call button
cover.
30
Celin Smith
Micheal Brown
Jack Hunter
Holly Clark
David Hutson
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 4
The Gira flush-mounted door stations.
The expanded devices.
+
The expansion.
In conjunction with additional flushmounted boxes, the functionality
of the Gira flush-mounted door
station can be expanded with additional call buttons, info modules or
a colour camera, even after installation. The use of a video control
device is required for using the
colour camera.
+
Flush-mounted door station
with 2/3-gang call button
plus 2 2/3-gang call buttons
and 4-gang cover frame,
Gira TX_44,
colour aluminium.
+
+
Flush-mounted door station
with 2/3-gang call button
plus info module and 3-gang
cover frame,
Gira TX_44,
colour aluminium.
+
+
Flush-mounted door station
with 1-gang call button
plus colour camera and 3-gang
cover frame,
Gira TX_44,
colour aluminium.
93
Control and signal transmission is
carried out via the same two cables
with which the audio function has
already been connected.
Note: If the colour camera is used,
the video control device is required.
When upgrading the Gira door
communication system, corresponding mounting plates are
available to cover installation
openings already present in
the building.
Michael White
Kate Smith
Susan Miller
Kate Potter
Ann Cooper
John Hutson
Frank Miller
Susan Smith
Susan Smith
Frank Miller
Ben Hunter
George Brown
Ann Hutson
Claire Armstrong
31
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 5
The Gira door stations.
The base functions.
Dr. Richard Holder
Dr. Peter Armstrong
Dentists
Consulting hours
on appointment
The call button.
All functions of the Gira door stations are shatter-proof, UV-stable,
shock-resistant and scratch-resistant, as well as water-protected
in accordance with IP 44.
The bell is rung at the Gira door
stations by means of a call button.
Anthony Smith
The base functions include the door
speaker and the call button. They
can be combined with additional
functions due to the modular design of the Gira flush-mounted door
stations, e.g. with a colour camera
for identifying persons or an info
module.
As the Gira flush-mounted door
stations are compatible with the
Gira TX_44 switch range, they can
also be combined with any desired
TX_44 functions in one cover frame
at any time. For example, with an
automatic control switch, which
automatically switches on the lighting at the front door when someone
approaches the house.
32
The hands-free feature.
The Gira door stations offer a topquality hands-free feature which is
comparable with the clear speech
quality of modern mobile phones
and hands-free units.
Thus the door speaker with an
integrated microphone disposes
of an optimised speech recording
and rendition thanks to language
controlled direction changeover
thanks to echo compensation and
background noise suppression.
The call button is evenly illuminated
from behind in white or blue with
maintenance-free, energy-saving
LED technology. As a result, the
inscription can be clearly read even
at night. When the inscription has
to be changed, the name plate can
easily be replaced without having
to remove the cover frame. The
inscription can be professionally
produced via the Gira inscription
service.
The call button is available in
the versions 1-gang and 2/3-gang.
If only two buttons are required,
the third can be covered with an
optionally available call button
cover.
The inscription can be produced
with the optionally available
inscription software and the related,
pre-stamped inscription sheets.
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 6
The Gira door stations.
The expansion functions.
93
The colour camera with day/night
switching.
The info module.
The info module can, for example,
be used to display the house number or the business and consulting
hours. The background lighting
via maintenance-free and powersaving LEDs, either in white or blue,
ensures that this information can
also be recognized well in the dark.
The camera is equipped with a
wide-angle lens with an aperture
angle of 150°. In combination with
the 1/3" CCD sensor of the camera
module, an effective camera angle
of detection of 100° results.
Normal visibility is like this.
The lens can be swivelled manually
in any direction by 20° during the
installation in order to align the
colour camera directly and to specify the angular coverage. Once the
camera has been positioned optimally, motorized operation is not
necessary thanks to the wide-angle
lens.
The camera dome can be replaced
independently of the electronics in
case of damage.
The colour camera has a unique
day/night switchover feature:
If the ambient brightness drops
below a value of 1 lux, it automatically switches over from the day to
the night mode.
During daylight the colour camera
ensures optimal colour rendering
through its automatic background
lighting, gain control and white
balance. At night it provides blackand-white images which, due to
the high light sensitivity in this
mode, also demonstrate excellent
quality even under poor lighting
conditions. In order for the CCD
sensor to detect all the details
in the dark, the colour camera is
equipped with LEDs for uniform
illumination of the camera
coverage.
A wide-angle lens simply shows
even more details.
20°
20°
100°
40°
100°
The range of coverage of
the camera can be swivelled
by 20° in all directions depending
on the conditions during installation.
At below-freezing temperatures an
integrated, temperature dependent
camera heater ensures proper
operation.
33
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 7
In addition to the Gira flush-mounted door stations, the Gira door
communication system also offers
door stations for surface-mounted
installation: These are completely
pre-assembled and have an especially low height of just 19 mm.
The Gira surface-mounted door stations.
The variants.
Gira surface-mounted door stations
are available in the colours:
Pure white (similar to RAL 9010),
anthracite (lacquered), aluminium
(lacquered).
Note: The surface-mounted door
stations are exclusively available
with a call-button background
lighting in white.
The variants.
Gira surface-mounted door station
with 1-gang call button
Surface-mounted door
station with 1-gang
call button, anthracite.
Surface-mounted
door station with two
2/3-gang call buttons,
anthracite.
Surface-mounted door
station with 1-gang
call button and colour
camera, anthracite.
Gira surface-mounted door station
with 2/3-gang call button
Gira surface-mounted door station
with two 2/3-gang call buttons
Gira surface-mounted door station
with 1-gang call button and colour
camera
Gira surface-mounted door station
with 2/3-gang call button and
colour camera
Michael Smith
Micheal Lennon
Marc Spencer
Mary Tailor
Andy Hills
Susan Armstrong
Anthony Smith
Frank Miller
Eddy Marks
34
43879_FI_TKS_Seite_28_35 07.10.2005 17:43 Uhr Seite 8
The basis of a Gira door station
surface-mounted is a torsionally
rigid anodised 2-gang or 3-gang
aluminium bearer profile which
is screwed to the wall
The Gira surface-mounted door stations.
Mounted on the wall in one unit.
A PCB unit specially protected
against the influence of the weather
is positioned on the carrier-plate
profile. It contains the functions
door speaker, call button and, depending on the door station variant,
a colour camera. The bearer profile
is equipped with a guide rail on
both sides. To simplify installation,
it is equipped wit a special cable
conduit for routing the cables to
the rear.
1.
2.
3.
The PCB unit can be slid downward
approx. 15 mm for screwing on and
connection to the 2-wire bus. This
increases the connection space and
simplifies mounting and installation. However, when doing so the
PCB cannot be removed from the
carrier-plate profile.
When the bearer profile has been
mounted on the wall and the device
has been wired, the housing cover
plate is simply placed on and
fastened using the Torx screws.
4.
15 mm
5.
19 mm
1.
For screwing down
and connection of
the cables, slide the
PCB unit downward
on the bearer profile.
2.
Screw carrier-plate
profile to wall.
4.
Push PCB unit into its
initial position again.
5.
Screw carrier-plate
profile to wall at
bottom and fit
device cover.
3.
Connect cables.
35
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 1
The Gira flush-mounted door
stations can also be integrated
in the Gira energy profiles.
The Gira flush-mounted door stations.
Integration in the Gira energy profile.
The energy profiles have corresponding empty units which can be
equipped with call buttons, a door
speaker or an info module from the
Gira flush-mounted door stations.
In addition, it is possible to integrate the colour camera in the
energy profiles without a light
element.
The door station profiles assembled
in this way are particularly wellsuited for use at driveways or
entrance gates.
The variants.
Other functions from the switch
range Gira TX_44 can also be used,
e.g. an automatic control switch
which automatically activates and
de-activates the light element of
the energy profile when a movement is detected.
The requirements and applications
differ. Therefore, three variations
are available:
1,400 mm high energy profiles with
empty units for the integration of
four functions
1,600 mm high energy profiles with
empty units for the integration of
six functions
1,600 mm high energy profiles with
light element and empty units for
the integration of three functions
with the exception of the colour
camera.
93
Base dimensions (W x H x D):
229 x 10 x 155 mm,
dimension of profiles (W x H x D):
142 x 1600 x 75 mm
142 x 1400 x 75 mm
Michael Lennon
Hillary Richards
John Hunter
Frank Armstrong
Susan Smith
Gordon Miller
Frank Miller
William Johnson
Mark Smith
Mathew Miller
Mary Miller
Anthony Armstrong
36
Mary Miller
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 2
The material.
The housing and the cover of the
energy profiles consist of robust,
weathering resistant aluminium
with a carefree surface. It is
scratch-resistant and dirt-resistant.
The profile base is manufactured
of galvanized steel in order to fulfil
the higher requirements.
The TX_44 device unit is also
distinguished by its robustness:
Shatter-proof, UV-stable and shockresistant thermoplastic resists the
influences of weathering, and
therefore ensures a long service
life.
All variants are water-protected
according to IP 44 and available in
the colours pure white (varnished,
similar to RAL 9010), anthracite
(varnished) and aluminium
(varnished).
The design awards.
The Gira energy profile, height
1,600 mm, with a light element,
equipped with an automatic control
switch, door speaker and 1-gang
call button was awarded the 2003
iF Product Design Award and the
Red Dot: best of the best 2003.
Gira energy profile 1,600 mm with light element,
outfitted with an automatic control switch, door speaker and 1-gang call button.
Doc Miller
37
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 3
The integration of the Gira flushmounted door stations in the
Gira Panel allows uniform installation of door communication and
illumination next to the front door.
The Gira flush-mounted door stations.
Integration in the Gira Panel.
The Gira Panel can be outfitted
individually in accordance with the
requirements: In addition to a light
element, the Gira Panel is equipped
with an empty unit for three functions, e.g. door speaker, call buttons
and info module or other functions
from the Gira TX_44 switch range
with the exception of the colour
camera.
It is, for example, also possible to
insert an automatic control switch
into the empty unit. Which automatically activates the light
element of the panel if anybody
approaches the house door during
darkness.
The Gira Panel is easily installed
on two mounting points on
the wall and is water-protected
in accordance with IP 44.
Dimensions (W x H x D):
112 x 990 x 70 mm
Light element for
illuminating the
entrance area.
93
3-gang empty unit
for the integration of
a Gira flush-mounted
door station or other
functions from the
Gira TX_44 switch
range.
38
John Masters
Anthony Miller
Marc Richards
Herbert Klein
Herbert Klein
H. Smith
H. Smith
Dr. Schneider
Dr. Atkins
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 4
The material.
The Gira Panel consists of shatterproof and shock-resistant thermoplastic with a high resistance to
ultraviolet light and weathering,
as well as an easy-care surface.
Gordon Miller
Gira Panel with light, equipped with automatic control wwitch and flush-mounted door station with 1-gang call button.
Aluminium colour.
It is available in the colours
pure white (varnished, similar to
RAL 9010), anthracite (varnished)
and aluminium (varnished).
39
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 5
The Gira door communication system.
The control devices.
The switching actuator.
The audio control device.
The video control device.
The switching actuator is used
when a switching function is to be
carried out on the Gira home station
or via an unassigned call button,
such as switching the staircase
light or opening the garage door.
The audio control device is used
to supply the 2-wire bus if all the
installed home and door stations
only have audio components.
Up to 32 devices, i.e. home stations,
door station and switching actuator,
can be connected to the audio
control device.
If video components (colour camera
or colour TFT display) are also used
in addition to audio components,
the higher-powered video control
device is required in place of an
audio control device. It is designed
for a considerably higher continuous load of 700 mA. Up to two
door stations with a colour camera
and 18 home stations with a colour
TFT display can be connected
to the video control device. The
connection and operating options
are virtually the same as those of
the audio control device.
Together with a common doorbell
transformer, the switching actuator
can also be used to control additional door openers, for example
for a driveway gate or the door of
a side entrance.
The switching actuator can be
programmed for one of the function types Switching, Timer/sec.,
Timer/min., Pulse, Controlling an
automatic staircase unit and the
function Door opener via push
buttons on the housing. The active
operating mode is indicated by
means of an illuminated LED.
In addition the switching actuator
has a binary input with which all
the function types can be executed
via a mechanical push button.
Dimensions: DRA with 2 modules.
A button on the device is used to
switch the entire system into the
programming mode, e.g. in order
to assign the call buttons of the
door station to the home stations.
In addition, the audio control device
disposes of a button for the door
opener programming: Either a
common door opener or a door
opener with other connection
values can also be connected
via the integrated relay contact.
The activation time of the door
opening is determined with an
adjuster. The status is displayed
with an LED.
Dimensions: DRA with 8 modules.
The control unit is equipped with
an electronic, self-resetting overload protection which protects the
electronics against short-circuits
and overloading on the bus line.
It is activated when, for example,
the bus lines are short-circuited
due to an installation error or too
many bus users have been
connected.
When using several cameras and
for the supply of the call button
lighting in large buildings, a
24 V DC power supply is required.
In addition, the power supply is
also required when the video control device is operated in combination with the TC-gateway.
Dimensions: DRA with 6 modules.
40
If the video cabling is carried
out as a branch line installation,
if several cameras are operated
in the system or if the cable must
be properly terminated, a video
distributor is required.
24 V DC power supply for
door communication.
43879_FI_TKS_Seite_36_41 07.10.2005 18:09 Uhr Seite 6
The configuration of the Gira door
communication system is particularly simply and is conceived in that
way only one installer is necessary.
Easy and fast.
The one-man commissioning concept.
This saves manpower and saves
costs. In addition it pays off when
the requirements of the user change
and the system must be adapted
or when maintenance is required.
Commissioning is carried out
by sequentially working through
simple steps (see below).
Simultaneously operated home
stations are also assigned to the
call buttons on the door stations
and the floor-call button during
a sequential commissioning.
Step 1:
Press and hold the ”System
Programming“ button on the
control device for 3 seconds.
Step 2:
Press the call buttons on the
door station for 3 seconds each in
the sequence in which the home
stations are then to be assigned.
Flat 3
Step 3:
Go to the individual home stations
in the specified order and press the
”Light“ button there for 3 seconds.
Step 4:
Once all home stations are assigned, end the programming mode
by briefly pressing the ”System
Programming“ button on the control device again.
3.
Flat 2
Flat 1
Clark Kent
2.
Gordon Brown
Frank Miller
Susan Smith
1.+ 4.
41
43879_FI_TKS_Seite_42 07.10.2005 18:28 Uhr Seite 1
The Gira door communication system.
Equipment examples.
6-family house with audio function, Gira built-in loudspeaker,
surface-mounted Hands-free feature home stations, Gira Standard 55
1-family house with audio function, surface-mounted door station,
surface-mounted Hands-free feature home station, Gira Standard 55
Quantity
Quantity
6
6
1
1
1
Order
Number
Component
1250 03 Surface-mounted Hands-free feature home stations �,
pure white glossy
1002 03 Gira Standard 55 2-gang cover frames without crossbar,
glossy pure white
1258 00 Built-in loudspeaker �
1287 00 Audio control device �
Common door opener, 12 V AC, max. 1.6 A
1
1
1
1
1
Order
Number
Component
1266 66 Surface-mounted door station with door speaker �
and 1-gang call button, pure white
1250 03 Surface-mounted Hands-free feature home station �,
pure white glossy
1002 03 Gira Standard 55 2-gang cover frames without crossbar,
glossy pure white
1287 00 Audio control device �
Common door opener, 12 V AC, max. 1.6 A
1-family house with audio function and telecommunication gateway,
surface-mounted door station
Quantity
1
1
1
1
1
42
Order
Number
Component
1266 65 Surface-mounted door station with door speaker �
and 1-gang call button, aluminium colour
1290 00 TC-gateway �
1287 00 Audio control device �
Common door opener, 12 V AC, max. 1.6 A
Wired or mobile telephone
FCB = floor call button
VD = video distributor
HS = home station
AS = additional supply
DO = door opener
The Gira door communication system.
Audio installation scenarios.
Cable length from audio control device to most distant device:
max. 170 m with cable diameter of 0.6 mm, max. 300 m
with cable diameter of 0.8 mm
HS 3
2
FCB
2
Bus
HS 2
2
AS
FCB
2
HS 1
Bus
FCB
Bus
Bridge
2
FCB
2
2
1287 00
HS 3
HS 2
HS 1
Connection of the home station,
loop-through solution
Audio control
device
Bridge set: Call button
illumination switched on.
Bridge not set: Call button
illumination switched off.
2
DO
Connection of the door station,
loop-through solution
Loop-through solution
HS 3
2
2
FCB
2
HS 2
2
2
AS
FCB
2
HS1
Bus
FCB
Bus
Bridge
2
2
FCB
2
2
2
1287 00
HS 3
HS 2
HS 1
DO
2
Audio control
device
Connection of the home station,
branch line solution
Connection of the door station,
branch line solution
Bridge set: Call button
illumination switched on.
Bridge not set: Call button
illumination switched off.
Branch line solution
43
Other installation situations and
comprehensive mounting and
planning aids are found in the basic
principles and planning examples
brochure, Order No. 1736 90.
The Gira door communication system.
Video installation scenarios.
The maximum cable length between the colour camera and
TFT display is 100 m.
HS 3 video
Resistance = yes
2
FCB
HS 2 video
Resistance = no
2
2
FCB
Bus
HS 1 video
Resistance = no
2
AS
2
2
2
1288 00
HS 3
HS 2
HS 1
Door station
Bridge
FCB
Video control
device
Bus
FCB
Bus
Bridge
2
DO
Connection of the home station,
loop-through solution
Connection of the door station,
loop-through solution
HS 3 video
Resistance = yes
2
2
FCB
HS 2 video
Resistance = yes
2
2
FCB
HS 1 video
Resistance = yes
AS
2
2
VD
2
1288 00
HS 3
HS 2
HS 1
Door station
DO
Bridge
FCB
2
Video control
device
Bus
FDB
Bus
Bridge
2
Branch line solution
Connection of the home station,
branch line solution
Connection of the door station,
branch line solution
With branch lines, the video distributor (VD) must be provided
in the respective branch to ensure proper cable termination.
Note: The bridge may not be removed in conjunction with video
components, as otherwise the TFT display or the colour camera
will not operate.
44
The Gira door communication system.
Equipment examples.
3-family house with audio function, flush-mounted door station,
standard home station with receiver, Gira Event
6-family house with audio function and door station profile,
Hands-free feature home stations, Gira Esprit
Quantity
Quantity
1
1
3
3
1
1
Order
Number
Component
1261 65 Flush-mounted door station �
with 2/3-gang call button, aluminium colour
0212 65 Gira TX_44 2-gang cover frame, aluminium colour �
1281 26 Standard home stations with receiver,
aluminium colour
0212 93 Gira Event 2-gang cover frame,
opaque blue central inserts, aluminium colour
1287 00 Audio control device �
Common door opener, 12 V AC, max. 1.6 A
1
1
1
1
6
6
1
1
Order
Number
Component
1354 26 Gira energy profile with four empty units �,
height 1,400 mm, aluminium colour.
Gira TX_44 4-gang cover frame, aluminium colour
1261 65 Flush-mounted door station with door speaker
and call button 2/3-gang, aluminium colour
1263 00 2/3-gang call button for flush-mounted door station
1264 00 Info module flush-mounted door station
0212 18 Gira Esprit 2-gang cover frame, glass mint
1280 03 Hands-free feature home station �,
pure white glossy
1287 00 Audio control device �
Common door opener, 12 V AC, max. 1.6 A
1-family house with video function, flush-mounted door station,
Hands-free feature home station and colour TFT display, Gira Esprit
Quantity
1
1
1
1
1
1
1
1
Order
Number
Component
1260 65 Flush-mounted door station with door speaker �
and 1-gang call button, aluminium colour
1265 65 Colour camera, aluminium colour
0213 65 Gira TX_44 3-gang cover frame, aluminium colour
1280 03 Hands-free feature home station �,
pure white glossy
1286 03 Colour TFT display, pure white glossy
0213 18 Gira Esprit 3-gang cover frame, glass mint
1288 00 Video control device �
Common door opener, 12 V, max. 1.1 A
45
Gira
Giersiepen GmbH & Co. KG
Electrical-InstallationSystems
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Germany
Tel +49 (0) 21 95 - 602 - 0
Fax +49 (0) 21 95 - 602 - 119
www.gira.com
info @ gira.com
Concept, design & editing:
schmitz Visuelle Kommunikation
www.hgschmitz.de
Picture credits
Artur, Architekturbilder Agentur GmbH, Köln 18, 38
Fotografie Jörg Hempel 18
Architektur Reinhold Weiss 18
Fotografie Wolfgang Schwager 38
Architektur Planteam 38
Renz Metallwarenfabrik, Kirchheim 26
Zefa, Düsseldorf, Fotografie H.G. Rossi 33
Product photography
Udo Kowalski, Wuppertal
Lithography
Damo Digital Technik, Duisburg
Printing
Druckerei Rasch, Bramsche
Order No. 1737 90 08/05 6. 23
Illustrations
Peter Krämer, Düsseldorf 11, 29-34, 36-39
Download PDF