Ladders – Ladders – Mobile Stands Without Handrails NH

Ladders – Mobile Stands Without Handrails
NH Mobile Ladder Stands* – No Handrail
• 1" x 16 ga. round tube construction
• 15" platform depth
• 3" spring-loaded non-marking casters
• 24"x 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
• 26" overall width
• 400 lb. capacity
• Durable blue powder coat finish
Part
OPTIONS:
~ Extended platforms
Please call for details.
Number
No. of
Steps
Platform
Height
(in.)
Base
Size (in.)
LxW
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
1NH
1
9
18x28
25
18x28x10
2NH
2
18
24x28
30
24x28x19
3NH
3
27
31x28
40
31x28x28
4NH
4
36
37x28
55
37x28x37
5NH
5
45
43x28
65
43x28x46
Parts for all NH ladders
3NH
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
5NH
NH-SS Stainless Steel
Mobile Ladder Stands*
– No Handrail
ANH Aluminum Mobile
Ladder Stands* – No
Handrail
• 1" stainless steel round tube construction
• Clean room finish
• 304 #4 brushed finish
• 24" x 7-1/2" deep, non-slip, raised, perforated, dimpled
tread pattern
• 3" spring-loaded non-marking casters
• 15" platform depth
• All components except casters and springs are fabricated
from high quality stainless steel
• 400 lbs. capacity
• Ships all welded
Part
Number
No. of
Steps
Platform
Height
(in.)
Base Size
(in.)
LxW
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
1NH-SS
1
9
18x28
30
18x28x10
2NH-SS
2
18
24x28
40
24x28x19
3NH-SS
3
27
31x28
53
31x28x28
4NH-SS
4
36
37x28
62
37x28x37
5NH-SS
5
45
43x28
95
43x28x46
No. of
Steps
Platform
Height
(in.)
Base
Size (in.)
LxW
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
1ANH
1
9
18x28
14
18x28x10
2ANH
2
18
24x28
24
24x28x19
3ANH
3
27
31x28
32
31x28x28
4ANH
4
36
37x28
37
37x28x37
5ANH
5
45
43x28
57
43x28x46
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational
Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario,
Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel;
maximum rated load: 300 lbs. (one person only) aluminum
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders
• 1" aluminum round tube construction
• 24" x 7-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 3" spring-loaded non-marking casters
• 15" platform depth
• 300 lbs. capacity
• Ships all welded
• Durable blue powder coat finish
OPTIONS:
~ Extended platforms
~ 316 #4 brushed finish
Please call for details.
Part
Number
RP2534: Rubber Pad
assembly
www.canwayequipment.com 12.1
Ladders – Safety Angle Mobile Stands Without Handrails
SNH Safety Angle Mobile Ladder Stands* – No Handrail
• 50° safety angle
• 1" x 16 ga. round tube construction
• 19" platform depth
• 3" spring-loaded non-marking casters
• 24" x 9-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 26" overall width
• 400 lb. capacity
• Durable blue powder
coat finish
2SNH
Diamond Channel
Grating
DCG-H 7-1/2" deep
tread standard
DCG-SH 9-1/2" deep
tread for safety ladders
• 1" Type 304 stainless steel round tube construction
• Clean room finish
• 304 #4 brushed finish
• 24" x 9-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 3" spring-loaded non-marking casters
• 19" platform depth
• 400 lbs. capacity
• All components except casters and springs are
fabricated from high quality stainless steel
• Ships all welded
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
2SNH-SS
2
20
31x28
47
31x28x21
3SNH-SS
3
30
41x28
57
41x28x31
4SNH-SS
4
40
50x28
67
50x28x41
Ladders
No. of
Steps
12.2
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
2SNH
2
20
31x28
47
31x28x21
3SNH
3
30
41x28
57
41x28x31
4SNH
4
40
50x28
67
50x28x41
Parts for all SNH ladders
3SNH
SNH-SS Stainless Steel Safety
Angle Mobile Ladder Stands*
– No Handrail
Part
Number
Part
Number
Shipping Details:
1-5 step ladders ship fully assembled.
6 step and larger ladders ship knocked down.
Shipping 6 step and larger ladders fully assembled
is only available on select sizes. Extra freight
charges will be incurred.
• H Mobile Ladder Stands: 6H – 14H
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
• HR RIP Mobile Ladder Stands: 6HR – 14HR
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
www.canwayequipment.com
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
RP2534: Rubber Pad
assembly
ASNH Aluminum Safety
Angle Mobile Ladder
Stands* – No Handrail
• 1" aluminum round tube construction
• 24" x 9-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 3" spring-loaded non-marking casters
• 19" platform depth
• 300 lbs. capacity
• Ships all welded
• Durable blue powder coat finish
Part
Number
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size (in.)
LxWxH
2ASNH
2
20
31x28
28
31x28x21
3ASNH
3
30
41x28
34
41x28x31
4ASNH
4
40
50x28
40
50x28x41
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational
Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario,
Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel;
maximum rated load: 300 lbs. (one person only) aluminum
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders – Mobile Ladder Stands With Handrails
H Mobile Ladder Stands* – With Handrails
• 1" x 16 ga. round tube construction
• 42" high handrail
• 15" platform depth
• 5"x1-1/4" RSX rubber swivel
casters on trip step mechanism
• 3" spring-loaded casters on 1H-3H
• Positive floor locking trip step
mechanism on 4H and up
• 7-1/2" deep, non-slip, raised,
perforated, dimpled tread pattern
• 400 lb. capacity
Diamond Channel
Grating
• 1H – 5H ship fully assembled;
6H – 20H ship knocked down
• Durable blue powder coat finish
6H
3H
OPTIONS:
~ Front or side walk-through
~ Fold-down handrail
~ Extended platform
Please call for details.
Part
Number
Parts for 1H – 3H ladders
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
Parts for 4H – 20H ladders
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Parts for H ladders
RP2534: Rubber
Pad assembly
No.
of
Steps
Platform
Height
(in.)
DCG-H 7-1/2" deep
tread standard
DCG-SH 9-1/2" deep
tread for safety ladders
Step
Width
(in.)
Base
Size
(in.)
Wheel
Description
For all wheel &
caster info &
details, please
see Section 13.
6PO
6" polyolefin wheel
(4H-7H ladders)
8PO
8" polyolefin wheel
(8H-20H ladders)
Weight
(lbs.)
Wheel/
Caster Type
& Size (in.)
Shipping
Size (in.)
LxWxH
3" springloaded
non-marking
casters
18x28x51
5" rubber
casters
6" polyolefin
wheels
37x34x78
1H
1
9
24
18x28
35
2H
2
18
24
24x28
50
3H
3
27
24
31x28
60
4H
4
36
24
37x34
85
5H
5
45
24
43x34
95
6H
6
54
24
48x34
115
7H
7
63
24
53x34
125
110x34x39
8H
8
72
28
59x38
150
124x38x39
9H
9
81
28
65x38
170
136x38x39
10H
10
90
28
70x38
175
11H
11
99
28
75x38
180
5" rubber
casters
8" polyolefin
wheels
24x28x60
31x28x69
43x34x87
102x34x39
144x38x39
155x38x39
12H
12
108
28
81x38
200
13H
13
117
28
86x38
215
166x38x39
177x38x39
14H
14
126
28
89x38
250
187x38x39
15H
15
135
28
94x38
260
197x38x39
16H
16
144
28
100x38
270
208x38x39
The following ladders are special order and cannot be returned –
please check measurements carefully.
16H
17
153
28
106x46
219x46x39
315
18H
18
162
28
111x46
325
19H
19
171
28
117x46
345
20H
20
180
28
122x46
355
5" rubber
casters
8" polyolefin
wheels
229x46x39
240x46x39
249x46x39
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health
and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and
United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel; maximum rated
load: 300 lbs. (one person only) aluminum
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders
17H
www.canwayequipment.com 12.3
Ladders – Mobile Ladder Stands With Handrails
H-SS Stainless Steel Mobile Ladder Stands* – With Handrails
6H-SS
Part
Number
1H-SS
No. Platform Step
of
Height Width
Steps
(in.)
(in.)
1
9
24
Base
Size
(in.)
18x28
Weight Wheel/Caster
(lbs.)
Type & Size
(in.)
35
2H-SS
2
18
24
24x28
50
3H-SS
3
27
24
31x28
60
4H-SS
4
36
24
37x34
85
5H-SS
5
45
24
43x34
95
Shipping
Size (in.)
LxWxH
3" springloaded
non-marking
casters
5" rubber
casters
6" polyolefin
wheels
24x28x60
31x28x69
37x34x78
43x34x87
6H-SS
6
54
24
48x34
115
7
63
24
53x34
125
8H-SS
8
72
28
59x38
150
124x38x39
9H-SS
9
81
28
65x38
170
136x38x39
10H-SS
10
90
28
70x38
175
11
99
28
75x38
180
12H-SS
12
108
28
81x38
200
13H-SS
13
117
28
86x38
215
14H-SS
14
126
28
89x38
250
5" rubber
casters
8" polyolefin
wheels
For all wheel & caster
info & details, please
see Section 13.
18x28x51
7H-SS
11H-SS
Wheel
Description
102x34x39
110x34x39
6PO or 8PO
6" or 8"
polyolefin wheel
144x38x39
155x38x39
Parts for 1H – 3H ladders
166x38x39
CAS-3TPR-SET
3" swivel,
spring-loaded
caster, c/w
spring & cotter
pin
177x38x39
187x38x39
15H-SS
15
135
28
94x38
260
197x38x39
16H-SS
16
144
28
100x38
270
208x38x39
Parts for 4H – 16H ladders
• 400 lbs. capacity
• 1" stainless steel round tube
• All components except casters
construction
and springs are fabricated from
• Clean room finish
high quality stainless steel
• 304 #4 brushed finish
• 7-1/2" deep, non-slip, raised,
OPTIONS:
perforated, dimpled tread pattern
~ Front or side walk-through
• Positive floor locking trip step
(comes with safety chains or gate)
mechanism on 4H and up
~ Extended platform
• 15” platform depth
• 1H-SS – 5H-SS ship fully assembled; ~ Fold-down handrail
Please call for details.
6H-SS – 16H-SS ship knocked down
AH Aluminum Mobile
Ladder Stands* –
With Handrails
Ladders
• 1" aluminum round tube construction
• 7-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• Positive floor locking trip step mechanism
on 4H and up
• 15” platform depth
• 300 lbs. capacity
• 1AH – 5AH ship fully assembled;
6AH – 16AH ship knocked down
• Durable blue powder coat finish
OPTIONS:
~ Front or side walk-through
(comes with safety chains or gate)
~ Extended platform.
~ Fold-down handrail
~ 316 #4 brushed finish Please call for details.
Part
Number
No.
of
Steps
Platform
Height
(in.)
Step
Width
(in.)
Base
Size
(in.)
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Parts for H ladders
RP2534: Rubber
Pad assembly
Weight Wheel/Caster
(lbs.)
Type & Size
(in.)
1AH
1
9
24
18x28
21
2AH
2
18
24
24x28
30
3AH
3
27
24
31x28
36
4AH
4
36
24
37x34
51
5AH
5
45
24
43x34
57
6AH
6
54
24
48x34
69
7AH
7
63
24
53x34
75
8AH
8
72
28
59x38
90
3" springloaded
non-marking
casters
18x28x51
5" rubber
casters
6" polyolefin
wheels
37x34x78
www.canwayequipment.com
24x28x60
31x28x69
43x34x87
102x34x39
110x34x39
124x38x39
9AH
9
81
28
65x38
102
136x38x39
10AH
10
90
28
70x38
105
144x38x39
11AH
11
99
28
75x38
108
12AH
12
108
28
81x38
120
13AH
13
117
28
86x38
129
14AH
14
126
28
89x38
150
187x38x39
15AH
15
135
28
94x38
156
197x38x39
16AH
16
144
28
100x38
160
208x38x39
5" rubber
casters
8" polyolefin
wheels
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel only
• Maximum rated load: 400 lbs (one person only) steel and stainless steel; maximum rated load: 300 lbs. (one person only) aluminum
See website for more information.
12.4
Shipping
Size (in.)
LxWxH
Stock item
155x38x39
166x38x39
177x38x39
Ladders – Safety Angle Mobile Stands with Handrails
• 50° safety angle ladder allows user to
face forward while descending
• 1" x 16 ga. round tube construction
• 42" high handrail
• 19" platform depth
• Positive floor locking trip step
mechanism
• 9-1/2" deep, non-slip, raised,
perforated, dimpled tread pattern
• 400 lb. capacity
• 2SH – 5H ship fully assembled;
6SH – 16SH ship knocked down
• Durable blue powder coat finish
OPTIONS:
~ Front or side walk-through
(comes with safety chains or gate)
~ Extended platform
~ Fold-down handrail
Please call for details.
3SH
Diamond Channel
Grating
Parts for 2SH – 3SH ladders 4SH – 16SH ladders
6SH
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
DCG-H 7-1/2" deep
tread standard
DCG-SH 9-1/2" deep
tread for safety ladders
8SH
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Wheel
Description
For all wheel &
caster info &
details, please
see Section 13.
6PO
6" polyolefin wheel
(4H-7H ladders)
8PO
8" polyolefin wheel
(8H-20H ladders)
Parts for SH ladders
RP2534: Rubber
Pad assembly
Part
Number
No.
of
Steps
Platform
Height
(in.)
Step
Width
(in.)
Base
Size
(in.)
Weight
(lbs.)
Wheel/Caster Type &
Size (in.)
Shipping
Size (in.)
LxWxH
2SH
2
20
24
31x28
50
3
30
24
41x28
65
3" spring-loaded
non-marking casters
31x28x62
3SH
4SH
4
40
24
53x34
105
53X34x82
5SH
5
50
24
59x34
120
6SH
6
60
24
69x34
135
7SH
7
70
24
76x34
145
5" rubber
casters
6" polyolefin
wheels
8SH
8
80
28
86x38
175
142x38x47
9SH
9
90
28
94x38
205
155x38x47
10SH
10
100
28
102x38
230
11SH
11
110
28
109x38
250
12SH
12
120
28
119x38
270
13SH
13
130
28
128x38
290
14SH
14
140
28
136x38
315
221x38x47
15SH
15
150
28
144x44
340
234x44x47
16SH
16
160
28
153x46
365
247x46x47
5" rubber
casters
8" polyolefin
wheels
41x28x72
59X34x92
116X34x47
129X34x47
168x38x47
181x38x47
195x38x47
208x38x47
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and
Safety Act, Regulation 851
• Tested and approved by an Ontario Professional
Shipping Details:
Engineer covering Ontario, Canada and United
1-5 step ladders ship fully assembled.
States of America, steel and stainless steel only
6 step and larger ladders ship knocked down.
•Maximum rated load: 400 lbs (one person only)
Shipping 6 step and larger ladders fully assembled
steel and stainless steel; maximum rated load:
is only available on select sizes. Extra freight
300 lbs. (one person only) aluminum
charges will be incurred.
See website for:
• H Mobile Ladder Stands: 6H – 14H
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
isometric view
• HR RIP Mobile Ladder Stands: 6HR – 14HR
•Canway Certification Statement covering
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
Mobile Ladder Stands
Stock item
Ladders
SH Safety Angle Mobile Ladder Stands*
www.canwayequipment.com 12.5
Ladders – Safety Angle Mobile Stands with Handrails
SH-SS Stainless Steel Safety Angle Mobile
Ladder Stands*
Diamond Channel
Grating
•
•
•
•
•
•
•
•
•
•
•
50° safety angle ladder
1" stainless steel round tube construction
Clean room finish
304 #4 brushed finish
42" high handrail
19" platform depth
Positive floor locking trip-step mechanism
9-1/2" deep, non-slip, raised,
perforated, dimpled tread pattern
400 lbs. capacity
2SH-SS – 5H-SS ship fully assembled; 6SH-SS – 16SH-SS ship knocked down
All components except casters and
springs are fabricated from high
quality stainless steel
DCG-H 7-1/2" deep
tread standard
DCG-SH 9-1/2" deep
tread for safety ladders
Ladders
No. Platform Step
of
Height Width
Steps
(in.)
(in.)
For all wheel & caster
info & details, please
see Section 13.
6PO
6" polyolefin wheel
(4-7SH-SS ladders)
8PO
8" polyolefin wheel
(8-16SH-SS ladders)
OPTIONS:
~ Front or side walk-through
(comes with safety chains
or gate)
~ Extended platform
~ Fold-down handrail
~ 316 #4 brushed finish
Please call for details.
Part
Number
Wheel
Description
12SH-SS
Base
Size
(in.)
LxW
Weight Wheel/Caster Type &
(lbs.)
Size (in.)
2SH-SS
2
20
24
31x28
50
3SH-SS
3
30
24
41x28
65
4SH-SS
4
40
24
53x34
105
5SH-SS
5
50
24
59x34
120
Shipping
Size (in.)
LxWxH
3" spring-loaded
non-marking casters
5" rubber
casters
6" polyolefin
wheels
31x28x62
41x28x72
53x34x82
59x34x92
116x34x47
Parts for 2–3SH-SS ladders
129x34x47
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
6SH-SS
6
60
24
69x34
135
7SH-SS
7
70
24
76x34
145
8SH-SS
8
80
28
86x38
175
142x38x47
9SH-SS
9
90
28
94x38
205
155x38x47
10SH-SS
10
100
28
102x38
230
11SH-SS
11
110
28
109x38
250
12SH-SS
12
120
28
119x38
270
13SH-SS
13
130
28
128x38
290
14SH-SS
14
140
28
136x38
315
221x38x47
15SH-SS
15
150
28
144x44
340
234x44x47
16SH-SS
16
160
28
153x46
365
247x46x47
5" rubber
casters
8" polyolefin
wheels
5SH-SS
168x38x47
181x38x47
195x38x47
208x38x47
Parts for 4–16SH-SS ladders
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Parts for SH-SS ladders
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational
Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario,
Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel;
maximum rated load: 300 lbs. (one person only) aluminum
12.6
www.canwayequipment.com
See website for:
•Ladder Assembly Instructions
and User Guide
•Schematic Drawings with
dimensions and isometric view
•Canway Certification Statement
covering Mobile Ladder Stands
Stock item
RP2534: Rubber
Pad assembly
Ladders – RIP Mobile Ladder Stands
HR RIP Mobile Ladder Stands*
•
•
•
•
•
•
Rotates in Place (RIP) to reduce turning radius in tight situations
1" x 16 ga. round tube construction
Diamond Channel
42" high handrail
Grating
15" platform depth
Positive floor locking trip step mechanism
7-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 400 lb. capacity
DCG-H 7-1/2" deep
• Ships knocked down – assembly required
tread standard
DCG-SH 9-1/2" deep
• Durable blue powder coat finish
Wheel
Description
For all wheel &
caster info & details,
please see
Section 13.
tread for safety ladders
OPTIONS:
~ Front or side walk-through (comes with safety chains or gate)
~ Extended platform ~ Fold-down handrail Please call for details.
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
8HR
6HR
6
54
28
Base
Size
(in.)
LxW
46x36
7HR
7
63
28
50x36
Weight
(lbs.)
Wheel/
Caster
Type &
Size (in.)
Shipping
Size (in.)
LxWxH
165
103x36x37
180
110x36x37
8HR
8
72
28
56x37
205
9HR
9
81
28
62x37
220
10HR
10
90
28
67x37
240
11HR
11
99
28
71x37
255
12HR
12
108
28
78x37
270
13HR
13
117
28
83x37
290
177x37x37
14HR
14
126
28
87x37
310
187x37x37
15HR
15
135
28
92x37
330
197x37x37
16HR
16
144
28
98x37
355
208x37x37
5" rubber
casters
8"
polyolefin
wheels
125x37x37
136x37x37
147x37x37
157x37x37
8PO
8" polyolefin wheel
(8–16HR ladders)
HR & HR-SS ladder
parts
RP2534: Rubber
Pad assembly
166x37x37
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
HR-SS Stainless Steel RIP Mobile Ladder Stands*
Rotates in Place (RIP) to reduce turning
radius in tight situations
1" stainless steel round tube construction
Clean room finish
42" high handrail
5" x 1-1/4" RSX rubber swivel casters
Positive floor locking trip step mechanism
7-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
15" platform depth
400 lb. capacity
All components except casters and springs are
fabricated from high quality stainless steel
• Ships knocked down - assembly required
Shipping Details:
1-5 step ladders ship fully assembled.
6 step and larger ladders ship knocked down.
Shipping 6 step and larger ladders fully assembled
is only available on select sizes. Extra freight
charges will be incurred.
• H Mobile Ladder Stands: 6H – 14H
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
• HR RIP Mobile Ladder Stands: 6HR – 14HR
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
OPTIONS:
~ Front or side walk-through (comes with safety chains or gate)
~ Extended platform ~ Fold-down handrail Please call for details.
Part
Number
6HR-SS
No. Platform
of
Height
Steps
(in.)
6
54
Step
Width
(in.)
Base
Size
(in.)
LxW
Weight
(lbs.)
28
46x36
165
Wheel/
Caster
Type &
Size (in.)
Shipping
Size (in.)
LxWxH
103x36x37
7HR-SS
7
63
28
50x36
180
110x36x37
8HR-SS
8
72
28
56x37
205
125x37x37
9HR-SS
9
81
28
62x37
220
10HR-SS
10
90
28
67x37
240
11HR-SS
11
99
28
71x37
255
12HR-SS
12
108
28
78x37
270
13HR-SS
13
117
28
83x37
290
5" rubber
casters
8"
polyolefin
wheels
136x37x37
147x37x37
157x37x37
166x37x37
177x37x37
14HR-SS
14
126
28
87x37
310
187x37x37
15HR-SS
15
135
28
92x37
330
197x37x37
16HR-SS
16
144
28
98x37
355
208x37x37
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America, steel and stainless steel
only
•Maximum rated load: 400 lbs (one person only) steel and stainless
steel; maximum rated load: 300 lbs. (one person only) aluminum
Stock item
See website for:
•Ladder Assembly Instructions
and User Guide
•Schematic Drawings with
dimensions and isometric view
•Canway Certification Statement
covering Mobile Ladder Stands
Ladders
•
•
•
•
•
•
•
•
•
•
www.canwayequipment.com 12.7
Ladders – RIP Mobile Safety Stands
SHR RIP Safety Angle Mobile Ladder Stands*
•
•
•
•
•
•
•
Rotates in Place (RIP) to reduce turning radius in tight situations
50° safety angle ladder
Diamond Channel
1" x 16 ga. round tube construction
Grating
42" high handrail
19" platform depth
Positive floor locking trip step mechanism
9-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
• 400 lb. capacity
DCG-H 7-1/2" deep
• Ships knocked down – assembly required
tread for standard ladders
DCG-SH 9-1/2" deep
• Durable blue powder coat finish
Wheel
Description
For all wheel &
caster info &
details, please
see Section 13.
tread for safety ladders
OPTIONS:
~ Front or side walk-through (comes with safety chains or gate)
~ Extended platform ~ Fold-down handrail Please call for details.
Part
Number
7SHR
Base
No. Platform Step
Weight
Height Width Size (in.) (lbs.)
of
(in.)
(in.)
LxW
Steps
Wheel/
Caster
Type &
Size (in.)
Shipping
Size (in.)
LxWxH
6SHR
6
60
28
66x37
190
118x37x41
7SHR
7
70
28
72x37
215
131x37x41
8SHR
8
80
28
81x37
240
9SHR
9
90
28
89x37
265
10SHR
10
100
28
97x37
290
11SHR
11
110
28
105x37
315
12SHR
12
120
28
114x37
330
13SHR
13
130
28
123x37
350
210x37x41
14SHR
14
140
28
133x37
365
223x37x41
15SHR
15
150
28
139x37
385
236x37x41
16SHR
16
160
28
148x37
405
249x37x41
144x37x41
5" rubber
casters
8"
polyolefin
wheels
157x37x41
170x37x41
183x37x41
197x37x41
Ladders
SHR-SS Stainless Steel RIP Mobile Ladder Stands*
•
•
•
•
•
•
•
•
•
•
•
•
Rotates in Place (RIP) to reduce turning radius in tight situations
1" stainless steel round tube construction
Part
No.
Clean room finish
Number
of
304 #4 brushed finish
Steps
50° safety angle ladder
6SHR-SS
6
42" high handrail
7SHR-SS
7
19" platform depth
8SHR-SS
8
Positive floor locking trip step mechanism
9SHR-SS
9
9-1/2" deep, non-slip, raised, perforated,
10SHR-SS
10
dimpled tread pattern
11SHR-SS
11
400 lb. capacity
12SHR-SS
12
All components except casters and
13SHR-SS
13
springs are fabricated from high quality
14SHR-SS
14
stainless steel
15SHR-SS
15
Ships knocked down – assembly required
16SHR-SS
OPTIONS:
~ Front or side walk-through
(comes with safety chains or gate)
~ Extended platform
~ Fold-down handrail
~ 316 #4 brushed finish
Please call for details.
12.8
16
SHR & SHR-SS
ladder parts
RP2534: Rubber
Pad assembly
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Base
Wheel/
Shipping
Platform Step
Weight
Height Width Size (in.) (lbs.) Caster Type Size (in.)
(in.)
(in.)
LxW
& Size (in.)
LxWxH
60
28
66x37
190
118x37x41
70
28
72x37
215
131x37x41
80
28
81x37
240
144x37x41
90
28
89x37
265
100
28
97x37
290
110
28
105x37
315
120
28
114x37
330
130
28
123x37
350
140
28
133x37
365
223x37x41
150
28
139x37
385
236x37x41
160
28
148x37
405
249x37x41
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless
steel; maximum rated load: 300 lbs. (one person only) aluminum
www.canwayequipment.com
8PO
8" polyolefin wheel
(8–16SHR ladders)
Stock item
157x37x41
5" rubber
casters
8" polyolefin
wheels
170x37x41
183x37x41
197x37x41
210x37x41
See website for:
•Ladder Assembly Instructions
and User Guide
•Schematic Drawings with
dimensions and isometric view
•Canway Certification Statement
covering Mobile Ladder Stands
Ladders – Mechanic’s Ladder, Tilt and Roll Ladder
ML – Mechanic’s Ladder*
•
•
•
•
•
•
•
•
Shelf Detail
Part
Number
No. Platform
of
Height
(in.)
Steps
Base Size
(in.)
LxW
Tilt and roll mobility
1" x 16 ga. round tube construction
24" wide x 22-1/2" deep platform
7-1/2" deep, non-slip,
perforated steps
26" wide x 10" deep
removable tool shelf
Two 5" diameter rubber wheels
400 lb. capacity
Durable blue powder
coat finish
Overall Weight
Height (lbs.)
(in.)
Shipping
Size (in.)
LxWxH
ML-3H
3
27
44x28
69
85
44x28x69
ML-4H
4
36
48x28
78
95
48x28x78
ML-5H
5
45
52x28
87
105
52x28x87
ML-6H
6
54
56x28
96
115
56x28x96
ML-4H
TR- Tilt and Roll Ladder*
• Tilt and roll into position
• 1" x 16 ga. round tube construction
• Extra large platform 24" wide x 22-1/2" deep
• Ladder rolls on two 5" diameter rubber wheels
• Rests on four 2-1/2" diameter rubber pads to secure
ladder to floor during use
• 42" high handrail
• 24" wide x 7-1/2" deep, non-slip, raised,
perforated, dimpled tread pattern
• 22-1/2" platform depth
• 400 lb capacity
• Durable blue powder coat finish
2H-TR
No. Platform Base
of
Height
Size
Steps
(in.)
(in.)
2
18
40x28
Overall Weight
Height (lbs.)
(in.)
61
51
WHL-5RSX
wheel
RP2534: Rubber
Pad assembly
Shipping
Size (in.)
LxWxH
40x28x61
3H-TR
3
27
44x28
70
65
44x28x70
4H-TR
4
36
47x28
78
80
47x28x78
5H-TR
5
45
51x28
87
95
51x28x87
6H-TR
6
54
55x28
96
110
55x28x96
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and
Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and
United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel; maximum rated load:
300 lbs. (one person only) aluminum
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders
Part
Number
ML & TR ladder parts
5H-TR
www.canwayequipment.com 12.9
Ladders – Tilt ’n’ Roll, Lock ’n’ Stock, Step Stool
2NH Tilt ’n’ Roll*
•
•
•
•
•
•
•
Allows for easy maneuvering of ladder
5"x1-1/4" rubber rigid wheels mounted on left side
2 step ladder, with platform
4 heavy duty rubber grip pads for secure footing
43" upright handle
Heavy duty all-welded construction
Durable blue powder coat finish
Part
Number
2NH-TR
No. Platform
of
Height
Steps
(in.)
2
18
Step
Width
24
Base Weight
Size
(lbs.)
(in.)
33x24
37
2NH-TR
Ladder parts for this
page and next
Shipping
Size (in.)
LxWxH
24x43x34
WHL-5RSX
wheel
Lock ’n’ Stock*
•
•
•
•
•
•
•
•
RP2534: Rubber
Pad assembly
Easy to maneuver
Heavy duty all-welded construction
16” x 7-1/2” deep non-slip raised, perforated, dimpled tread pattern
Locks when in the climbing position
Folds to 10“ deep and locks for compact storage
4 heavy duty rubber grip pads for secure footing
400 lb. capacity
Durable blue powder coat finish
Part
Number
2LNS
No. Platform Step
of
Height Width
Steps
(in.)
(in.)
2
20
16
Base
Size
(in.)
17x22
Weight
(lbs.)
27
3LNS
3
30
16
24x22
35
4LNS
4
40
16
31x22
43
Wheel Type &
Size
5" rubber wheel
Shipping
Size (in.)
LxWxH
23x11x45
23x11x57
23x11x69
3LNS
Shipping Details:
1-5 step ladders ship fully assembled.
6 step and larger ladders ship knocked down.
Shipping 6 step and larger ladders fully assembled
is only available on select sizes. Extra freight
charges will be incurred.
• H Mobile Ladder Stands: 6H – 14H
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
• HR RIP Mobile Ladder Stands: 6HR – 14HR
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
Ladders
Step Stool*
•
•
•
•
•
•
•
•
Lightweight 2 step stool
20” x 9-1/2” platform
18” top step height
Non-slip raised, perforated, dimpled tread pattern
50° safety angle incline
Heavy duty all-welded aluminum
or steel construction
Robust grey glides for secure
footing
Durable blue powder coat finish
2NH-ST
Part
Number
2NH-ST
2ANH-ST
No. Platform Step Base Size Weight
of
Height Width
(in.)
(lbs.)
Steps
(in.)
(in.)
2
18
20
22x20
20.5
2
18
20
22x20
9
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless steel; maximum rated load: 300 lbs. (one person only) aluminum
12.10
www.canwayequipment.com
Stock item
Shipping
Size (in.)
LxWxH
20x22x18
20x22x18
Ladders – Trailer Access & Lever Lift Ladders
Trailer Access Ladder*
•
•
•
•
•
•
•
•
•
1-5 step ladders ship fully assembled.
6 step and larger ladders ship knocked down.
Shipping 6 step and larger ladders fully assembled
is only available on select sizes. Extra freight
charges will be incurred.
• H Mobile Ladder Stands: 6H – 14H
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
• HR RIP Mobile Ladder Stands: 6HR – 14HR
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
Provides a secure access to tractor and cube vans
24" x 22-1/2" platform
50° safety angle ladder allows user to face forward
while descending
Front walk through with safety chains
Heavy duty all-welded construction
400 lb. capacity
9-1/2" deep, non-slip, raised, perforated,
dimpled tread pattern
10” flat free wheels
Durable blue powder coat finish
Part
Number
4SH-TAL
5SH-TAL
Shipping Details:
No. Platform Step
of
Height Width
Steps
(in.)
(in.)
4
40
24
Base
Size
(in.)
34x56
Wheel
Description
For all wheel & caster
info & details, please
see Section 13.
Weight Wheel/Caster
(lbs.)
Type & Size
(in.)
112
5SH-TAL
5
50
24
33x64
125
6SH-TAL
6
60
24
34x73
138
10" flat-free
wheels
Shipping
Size (in.)
WxLxH
34x56x82
32x65x92
34x73x102
10FF
10" flat free polyurethane
Lever Lift Mobile Ladder Stands*
7H-LL
Part
Number
4H-LL
No. of Platform Step
Steps Height Width
(in.)
(in.)
4
36
24
Base
Size
(in.)
37x34
Weight
(lbs.)
85
Caster
Type &
Size (in.)
4” rubber
casters
Shipping
Size (in.)
LxWxH
37x34x78
5H-LL
5
45
24
43x34
95
6H-LL
6
54
24
48x34
115
7H-LL
7
63
24
53x34
125
110x34x39
8H-LL
8
72
28
59x38
150
124x38x39
9H-LL
9
81
28
65x38
170
136x38x39
10H-LL
10
90
28
70x38
175
144x38x39
11H-LL
11
99
28
75x38
180
12H-LL
12
108
28
81x38
200
13H-LL
13
117
28
86x38
215
177x38x39
14H-LL
14
126
28
89x38
250
187x38x39
15H-LL
15
135
28
94x38
260
197x38x39
16H-LL
16
144
28
100x38
270
208x38x39
4SH-LL
4
40
24
53x34
105
53x34x47
5SH-LL
5
50
24
59x34
120
6SH-LL
6
60
24
69x34
135
7SH-LL
7
70
24
76x34
145
129X34x47
SH-LL
• 50° incline angle
• 19" platform depth
• 9-1/2” deep,
non-slip raised,
perforated,
dimpled tread pattern
8SH-LL
8
80
28
86x38
175
142x38x47
9SH-LL
9
90
28
94x38
205
155x38x47
10SH-LL
10
100
28
102x38
230
168x38x47
11SH-LL
11
110
28
109x38
250
12SH-LL
12
120
28
119x38
270
13SH-LL
13
130
28
128x38
290
14SH-LL
14
140
28
136x38
315
221x38x47
OPTION: Fold-down handrail
15SH-LL
15
150
28
144x44
340
234x44x47
16SH-LL
16
160
28
153x46
365
247x46x47
H-LL
• 60° incline angle
• 15" platform depth
• 7-1/2” deep,
non-slip raised,
perforated,
dimpled tread
pattern
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel only
•Maximum rated load: 400 lbs (one person only) steel and stainless
steel; maximum rated load: 300 lbs. (one person only) aluminum
5” rubber
casters
4” rubber
casters
5” rubber
casters
43x34x87
102x34x39
155x38x39
166x38x39
59x34x47
116X34x47
181x38x47
195x38x47
208x38x47
Ladders
• Unique lever lift action for
easy maneuvering
• 1" x 16 ga. round tube
construction
• 42" high handrail
• 15" platform depth
• Heavy duty all-welded
construction
• 400 lb. capacity
• Ships knocked down
– assembly required
• Durable blue
powder coat finish
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
www.canwayequipment.com 12.11
Ladders – Rolling Work Platforms, Ladder Options
Rolling Work Platforms*
• Extra Large platform fits 2 people and equipment.
• 50° safety angle ladder allows user to
face forward while descending
• 36" x 36" platform size
• Positive floor locking trip step mechanism
• Heavy duty all-welded construction
• 9-1/2" deep non-slip diamond channel grating tread
• Complies with OSHA and ANSI standards
• 800 lb. capacity
• Ships fully assembled
• Durable blue powder coat finish
Part
Number
4SH-RWP
3SH-RWP
No. of Platform Step
Steps Height Width
(in.)
(in.)
3
30
36
Base
Size
(in.)
46x62
RP2534: Rubber
Pad assembly
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
Weight Caster Type
(lbs.) & Size (in.)
105
4SH-RWP
4
40
36
46x70
124
5SH-RWP
5
50
36
46x78
143
5” rubber
casters
Shipping
Size (in.)
LxWxH
62x46x72
70x46x82
78x46x92
Ladder Options
Tool Tray
Diamond Channel Grating
• Removable work tray for
additional working area
• Available on all ladders
with handrails
• 10" by 26" or 30"
workable area.
• 7-1/2" deep (DCG-H) for
standard ladders or
9-1/2" deep (DCG-SH)
non-slip tread for safety
ladders
• Durable blue powder
coat finish
Part
Number
TT26
Tray
Size
10x26
Capacity
(lb.)
100
TT26
Weight
(in.)
8
Shipping Size
LxWxH (in.)
26x13x13
TT30
10x30
100
10
30x13x13
TT38
10x38
100
15
38x13x13
Vertical
Pickets
Ladders
• For retail
applications
DCG-H
DCG-SH
Gated Walk-through
Options on H Series Ladders
• Allows for easy access to platforms and other
raised surfaces.
• Available with safety chains or a gate
• Front, left, or right walk-through available
• Side walk-through ladders have an extended platform
Fold-down Handrail
FWT Double Gate
12.12
www.canwayequipment.com
Stock item
LWT Single Gate
Ladders – SL Series Shelf Lift Mobile Ladder Stands
ESL Electric Mobile Ladder Stands*
• 12 volt low maintenance Dry Cell Battery c/w onboard charger system
• Upgraded heavy duty WARN 1200 Series industrial winch
• Industrial contact limit switches at top and bottom position
for additional safety
• Requires 110 volt duplex power outlet for battery charger (not included)
• Power system only requires battery terminal cables to be connected
at time of assembly
• Heavy duty 300 lb. capacity cargo shelf, 30" x 30"
• Integral shelf column mounted vertically on back of ladder stand
c/w extended reinforced chassis
• 1" x 16 ga. round tube construction
• 42" high handrail
• 22-1/2" platform depth
• Two 5" x 1-1/4" RSX rubber swivel casters and
two 6" x 2" mold on rubber casters
• Positive floor locking trip step mechanism
• 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
• Durable blue powder coat finish
• Modular knock down "KD" construction for compact shipping
Control Switch
9H-ESL
Winch & Battery Detail
7H-ESL
No. Platform
of
Height
Steps
(in.)
7
63
Step
Width
(in.)
28
Base Size
(in.)
LxW
87x36
Weight
(lbs.)
455
Shipping Size
(in.)
LxWxH
113x36x61
8H-ESL
8
72
28
92x36
465
127x36x61
9H-ESL
9
81
28
97x36
485
137x36x61
10H-ESL
10
90
28
102x36
515
148x36x61
11H-ESL
11
99
28
107x36
535
158x36x61
12H-ESL
12
108
28
114x36
555
169x36x61
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
•Maximum rated load: 400 lbs (one person only)
Caster
Description
ESL ladder parts
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
RP2534: Rubber
Pad assembly
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
For all wheel & caster
info & details, please
see Section 13.
Ladders
Part
Number
6MR
6" molded rubber
caster
www.canwayequipment.com 12.13
Ladders – SL Series Shelf Lift Mobile Ladder Stands
MSL Manual Mobile Ladder Stands*
• Heavy duty 300 lb. capacity cargo shelf, 30" x 30"
• Integral shelf column mounted vertically on back of ladder
stand c/w extended reinforced chassis
• 1" x 16 ga. round tube construction
• 42" high handrail
• 22-1/2" platform depth
• Two 5" x 1-1/4" RSX rubber swivel casters and
two 6" x 2" mold on rubber casters
• Positive floor locking trip step mechanism
• 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
• Durable blue powder coat finish
• Modular knock down "KD"
construction for compact
shipping
Platform
Detail
Shipping Position
10H-MSL
Wheel
Description
MSL ladder parts
Part
Number
No. Platform
of
Height
Steps
(in.)
7
63
355
Shipping Size
(in.)
LxWxH
113x36x61
8H-MSL
8
72
28
92x36
365
127x36x61
9H-MSL
9
81
28
97x36
385
137x36x61
10H-MSL
10
90
28
102x36
415
148x36x61
11H-MSL
11
99
28
107x36
435
158x36x61
12H-MSL
12
108
28
114x36
455
169x36x61
Ladders
7H-MSL
Step
Width
(in.)
28
Base Size
(in.)
LxW
87x36
Weight
(lbs.)
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
•Maximum rated load: 400 lbs (one person only)
12.14
www.canwayequipment.com
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
RP2534: Rubber
Pad assembly
For all wheel & caster
info & details, please
see Section 13.
6MR
6" molded rubber
caster
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders – Crossover Ladders
Crossover Ladder - 60°
• Provides safe walkway over conveyors,
machinery, pipes, and other obstacles
• 1" x 16 ga. round tube construction
• Standard perforated, raised,
dimpled step
• 60° standard slope
• 400 lb. capacity
• Ships fully assembled
• Durable blue powder coat finish
5SHCO-60
Part
Number
No.
of
Steps
4HCO-30
4
Platform
Size (in.)
LxW
30x24
Clearance Weight
(in.)
(lbs.)
HxW
34.5x13
150
Standing
Size (in.)
LxWlH
62x29x78
Shipping Size
(in.)
LxWxH
62x29x78
4HCO-45
4
45x24
34.5x28
165
77x29x78
77x29x78
4HCO-60
4
60x24
34.5x43
184
92x29x78
92x29x78
5HCO-30
5
30x24
43.5x13
165
73x29x87
73x29x87
5HCO-45
5
45x24
43.5x28
183
87x29x87
87x29x87
102x29x87
5HCO-60
5
60x24
43.5x43
201
102x29x87
6HCO-30
6
30x24
52.5x13
181
83x29x96
83x29x96
6HCO-45
6
45x24
52.5x28
199
98x29x96
98x29x96
6HCO-60
6
60x24
52.5x43
218
113x29x96
113x29x96
Crossover Ladder - 50°
Part
Number
4SHCO-30
No. Platform Clearance Weight Standing Size
Size (in.)
(in.)
(lbs.)
(in.)
of
Steps
WxL
HxW
LxWxH
4
30x24
38.5x10
161
85x29x82
Shipping Size
(in.)
LxWxH
85x29x82
4SHCO-45
4
45x24
38.5x25
179
100x29x82
100x29x82
4SHCO-60
4
69x24
38.5x40
198
115x29x82
115x29x82
5SHCO-30
5
30x24
48.5x10
181
98x29x92
98x29x92
5SHCO-45
5
45x24
48.5x25
218
128x29x92
128x29x92
5SHCO-60
5
60x24
48.5x40
210
129x29x92
129x29x92
6SHCO-30
6
30x24
58.5x10
201
116x29x107
116x29x107
6SHCO-45
6
45x24
58.5x25
219
131x29x102
131x29x102
6SHCO-60
6
60x24
58.5x40
237
146x29x102
146x29x102
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel only
• Maximum rated load: 400 lbs (one person only) steel and stainless steel; maximum rated load: 300 lbs. (one person only) aluminum
See website for:
•Ladder Assembly Instructions and User Guide
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands
Stock item
Ladders
• Provides safe walkway over conveyors,
machinery, pipes, and other obstacles
• 1" x 16 ga. round tube construction
• Standard perforated, raised, dimpled step
• 50° standard slope
• 400 lb. capacity
• Ships fully assembled
• Durable blue powder coat finish
www.canwayequipment.com 12.15
Ladders – Cantilever Ladder
Cantilever Mobile Ladder Stands
6SH-CL-19-6PH
• Cantilever design allows access to hard-to-reach areas
• 50° safety angle ladder allows user to face forward while
descending
• 1" x 16 ga. round tube construction
• 42" high handrail
• 19" platform depth
• Four 6” phenolic casters, 2 swivel with
Diamond Channel
total lock brake and 2 rigid
Grating
• 9-1/2" deep, non-slip, raised,
perforated, dimpled tread pattern
• 400 lb. capacity
• Ships knocked down
DCG-H 7-1/2" deep
• Durable blue powder coat finish
tread standard
DCG-SH 9-1/2" deep
tread for safety ladders
Part
Number
6PH
6" phenolic caster
12.16
Shipping Details:
1-5 step ladders ship fully assembled.
6 step and larger ladders ship knocked down.
Shipping 6 step and larger ladders fully assembled
is only available on select sizes. Extra freight
charges will be incurred.
• H Mobile Ladder Stands: 6H – 14H
• SH Safety Angle Mobile Ladder Stands: 6SH – 8SH
• HR RIP Mobile Ladder Stands: 6HR – 14HR
• SHR RIP Mobile Ladder Stands: 6SHR – 9SHR
www.canwayequipment.com
47.5” Overhang
Ladders
14SH-CL-47-6PH
28.5” Overhang
For all wheel & caster
info & details, please
see Section 13.
38” Overhang
Caster
Description
19” Overhang
6SH-CL-19
No. Overhang Platform
of
Clearance Height
Steps HxD (in.)
(in.)
6
58x16.5
60
Overall
Dimensions
(in.) LxWxH
81x39x103
Shipping
Size (in.)
LxWxH
116x39x79
7SH-CL-19
7
68x16.5
70
89x39x113
129x39x79
8SH-CL-19
8
78x16.5
80
98x39x123
142x39x79
9SH-CL-19
9
88x16.5
90
106x39x133
155x39x79
10SH-CL-19
10
98x16.5
100
114x39x143
168x39x79
11SH-CL-19
11
108x16.5
110
123x39x153
181x39x79
12SH-CL-19
12
118x16.5
120
131x39x163
194x39x79
13SH-CL-19
13
128x16.5
130
140x39x173
207x39x79
14SH-CL-19
14
138x16.5
140
148x39x183
220x39x79
6SH-CL-28
6
58x26
60
90x39x103
125x39x79
7SH-CL-28
7
68x26
70
99x39x113
138x39x79
8SH-CL-28
8
78x26
80
107x39x123
151x39x79
9SH-CL-28
9
88x26
90
116x39x133
164x39x79
10SH-CL-28
10
98x26
100
124x39x143
177x39x79
11SH-CL-28
11
108x26
110
132x39x153
190x39x79
12SH-CL-28
12
118x26
120
141x39x163
203x39x79
13SH-CL-28
13
128x26
130
149x39x173
216x39x79
14SH-CL-28
14
138x26
140
157x39x183
229x39x79
6SH-CL-38
6
58x35.5
60
100x39x103
134x39x79
7SH-CL-38
7
68x35.5
70
108x39x113
147x39x79
8SH-CL-38
8
78x35.5
80
117x39x123
160x39x79
9SH-CL-38
9
88x35.5
90
125x39x133
173x39x79
10SH-CL-38
10
98x35.5
100
133x39x143x
186x39x79
199x39x79
11SH-CL-38
11
108x35.5
110
142x39x153
12SH-CL-38
12
118x35.5
120
150x39x163
212x39x79
13SH-CL-38
13
128x35.5
130
159x39x173
225x39x79
14SH-CL-38
14
138x35.5
140
167x39x183
238x39x79
6SH-CL-47
6
58x45
60
109x39x103
143x39x79
7SH-CL-47
7
68x45
70
118x39x113
156x39x79
8SH-CL-47
8
78x45
80
126x39x123
169x39x79
9SH-CL-47
9
88x45
90
135x39x133
182x39x79
10SH-CL-47
10
98x45
100
143x39x143
195x39x79
11SH-CL-47
11
108x45
110
151x39x153
208x39x79
12SH-CL-47
12
118x45
120
160x39x163
221x39x79
13SH-CL-47
13
128x45
130
168x39x173
234x39x79
14SH-CL-47
14
138x45
140
176x39x183
247x39x79
Stock item
Ladders – Rolling Dock Ladder
RDL Rolling Dock
Ladder
Ladders
• Safe alternative for sealing and unsealing
open top shipping containers
• Extendable platform c/w incremental
locking pin
• Compact side wall mount design “Easy
Roll” track system to maintain optimum
clearance
• Typically installed in pairs for optimum
efficiency when in use
• Special orders available for unique
applications
Stock item
www.canwayequipment.com 12.17
Ladders – Bus Access Platform
BAP – Bus Access Platform
Ladders
• Provides safe, enclosed work area for roof-top access and maintenance
• Lockable swing gates
• Platform includes heavy-duty phenolic swivel caster c/w foot brakes and 24" adjustable outriggers for optimal stability
• Electric shelf lift for battery maintenance and replacement
• 12 volt low maintenance dry cell battery c/w onboard charger system
• Upgraded heavy duty WARN
1200 Series industrial winch
• Industrial contact limit switches at
top and bottom position for
additional safety
• Requires 110 volt duplex
power outlet for battery
charger (not included)
• Power system only
requires battery terminal
cables to be connected
at time of assembly
• Heavy duty 300 lbs.
capacity cargo shelf
• Integral shelf column
mounted vertically on
back of ladder stand, c/w
extended reinforced chassis
Top View
12.18
www.canwayequipment.com
Stock item
Ladders – Narrow Aisle Mobile Ladder Stand
Narrow Aisle Mobile Ladder Stand
• Narrow rolling ladder allows user to navigate
through narrow aisles
• Overall width of 30-1/4"
• 1" x 16 ga. round tube construction
• 42" high handrail
• 15" platform depth
• Positive floor locking trip step mechanism
• 7-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• Heavy duty all-welded construction
• 400 lb. capacity
• Durable blue powder coat finish
OPTIONS:
~ Locking swivel casters
Please call for details.
Parts for 1H – 3H ladders
Wheel
Description
For all wheel &
caster info &
details, please
see Section 13.
CAS-3TPR-SET
3" swivel
spring-loaded
caster, c/w spring
& cotter pin
6PO
Parts for 4H – 10H ladders
6" polyolefin wheel
(4H-7H ladders)
CAS-5RSX-TS
5RSX swivel
c/w threaded
stem
7H-20
Parts for all H ladders
Part
Number
3H-20
No. of
Steps
Platform
Height
(in.)
Step
Width
(in.)
Base Size
(in.) LxW
Weight
(lb.)
Caster Type
and Size
Shipping Size
(in.) LxWxH
3
27
20
31x24
55
3” spring-loaded
non-marking casters
31x24x69
4H-20
4
36
20
39x30-1/4
80
5H-20
5
45
20
45x30-1/4
90
6H-20
6
54
20
50x30-1/4
105
7H-20
7
63
20
55x30-1/4
115
8H-20
8
72
20
61x30-1/4
120
9H-20
9
81
20
66x30-1/4
135
10H-20
10
90
20
72x30-1/4
142
Stock item
39x31x78
5” rubber caster
6” polyolefin wheels
45x31x87
102x31x39
110x31x39
5” rubber caster
8” polyolefin wheels
124x31x39
Ladders
8PO
8" polyolefin wheel
(8H-20H ladders)
RP2534: Rubber
Pad assembly
136x31x39
144x31x39
www.canwayequipment.com 12.19
Download PDF