K-SERIES
Prophon portable systems
Complete range of portable passive and active sound systems
The K-series are an affordable range of high quality,
active and passive speakers, consisting of subwoofers,
stage-monitors, fullrange speakers and active systems.
Designed for portable ”plug´n play” usage in the event
industry, for bands, DJ´s and rental companies.
Or for fixed installations in bars, restaurants, lounges,
schools, nightclubs, live stages, theme parks and training
facilities.
The systems are easy to use and setup, and they are
compatible to be used together in a variety of ways,
depending on demand, application and size of the event.
Each speaker was carefully designed due to a demand
from our customers in our domestic market, asking for a
high quality systems with lower prices compared to our
High-end tour systems.
58
KS-SERIES
active and passive subwoofers for PA and installation
K-Series subwoofers
Available both in active (self-powered) versions and passive (bi-amplified) versions.
We have designed the subwoofers to reproduce an accurate and precise base with rapid cone control and natural frequency
response. They are perfect for portable use with any of the K-series or KX-series fullrange speakers and stage monitors,
either in an active self-powered system or in fixed installations with external amplifiers and DSP´s.
All cabinets are painted with a special hardened lacque for withstanding ”on the road” handling,
each subwoofer have two handles, speaker stand top-hat, four rubber feet, fully covering protective front grille
with speaker foam behind, castor plates, ”gig-bags”, rigging- & installation- hardware are available as options.
There are four models available in the K-series of subwoofers:
KS15
• 15” woofer,
• 99dB sensitivity,
• 4” voice coil,
• 132dB max SPL,
• Passive,
• 8 ohm,
• Weight: 31 kg. • Size: H55xW45xD64
• 600W / 2400W peak,
• Frequency response: 45-180Hz
KS15A
With same data as the KS15 but with three built in amplifiers of totally 1000W: 600W for subwoofer + 200W + 200W to stereo top
speakers, also driving two K10 fullrange speakers in an active system (K1000) with balanced XLR left/right in and unbalanced RCA
left/right input, adjustable LP-crossover frequency 80-180Hz, 24dB/oct, 2 x speakon out, adjustable HP-crossover for speakon output
to top speakers 20Hz/80Hz/120Hz, 2 x mic in with separate volume, separate volume for subwoofer, master volume,
3-band EQ on top speaker output.
KS18
• 18” subwoofer,
• 4” voice coil,
• 8 ohm,
• 650W / 2600W peak,
• 133dB max SPL,
• Weight: 40 kg.
• Frequency response: 40-180Hz
• Passive,
• 99dB sensitivity,
• Size: H65xW54xH65
KS18A
With same data as the KS18 but with a built in 600W mono amplifier,
with balanced XLR left/right in and unbalanced RCA left/right input,
adjustable LP-crossover frequency 80-180Hz, 24dB/oct,
adjustable HP-crossover for XLR output to active fullrange speakers
off/80Hz/120Hz, 2 x mic in with separate volume controls,
separate volume for subwoofer, separate master volume.
The K1000 active sound system with 1000W amplifier
(600W+200W+200W) a combination of KS15A and two pcs of
the K10, 10”/1” fullrange speaker.(see portable sound systems)
59
K-SERIES
Prophon portable systems
Complete range of portable passive and active sound systems
K-Series fullrange speakers
The K-series fullrange speakers was designed to be used for portable live music and recorded applications and for installation.
With the 12 x M10 flying points K-series fullrange speakers can be installed in a variety of ways, either as fullrange speakers,
or as top speakers with any of the K-series subwoofers for extended low frequency response.
Perfect for bands, DJ´s troubadours, rental and event companies, or for installing in nightclubs, lounges, schools, live performance
stages, theatres, conference centres, churches etc.
Fitted with top hat for mounting on speaker stands, handles and 12 x M10 rigging points, the drivers are protected by a fully
covering speaker-grille with speaker foam behind.
The self powered version features:
• 300W+50W amplifiers
• 2 x mic input with separate volume
• 230V/115V select switch
• XLR line in / XLR mix out
• 3 x Led for active, signal and clip.
• AC in with fuse slot
K10
K12
K12A
Construction
two-way passive,
front-loaded bass reflex
Two-way passive,
front-loaded bass reflex
Two way active
front-loaded bass reflex
Components
LF: 10” (320mm)
HF: 1” (25 mm.)
LF: 12” (320mm)
HF: 1” (25 mm.)
LF: 12” (320mm)
HF: 1” (25 mm.)
Nominal impedance
8 ohm
8 ohm
8 ohm
Power handling RMS
200W
300W
300W
Power handling cont..
400W
600W
600W
Frequency response
70Hz-20kHz
60Hz-20kHz
60Hz-20kHz
Axial sensitivity
95 dB, 1W/1m.
97dB, 1W/1m.
97dB, 1W/1m.
Max calc. SPL
124dB
128dB
128dB
Dispersion H x V
80 x 60
90 x 80
90 x 80
Connectors
2 x NL4MP speakon
1+/1- input, 2+/2- link
2 x NL4MP speakon
1+/1- input, 2+/2- link
XLR line in, XLR Mix out
2 x 6,3 mm. tele in for mic
Weight
16 kg.
19,5kg.
19,5kg.
Dimensions mm.
H485 x W300 x D321
H565 x W350 x D376
H565 x W350 x D376
Extended features
active version
60
• Bass and treble control (+/-10dB)
• Line volume & master volume
• Power on/off switch
Bass/treble controls (+/-10dB)
Mic1/Mic2 volume controls
Line volume, Master volume
KX-SERIES
Complete range of portable passive and active sound systems
KX-Series multipurpose stage monitors
Low profile active stage monitors, for live stages, bands, trubadours, DJ´s, TV-studios, schools, rental companies,
the event industry, or for other demanding performances.
The coaxial design with a conical dispersion of 80x80 generates a coherent and symmetrical dispersion pattern.
The KX-series has a balanced frequency response with a rich, transparent sound, ideal for vocal monitoring as well as instruments
or recorded music. Fullrange frequency response in combination with an abundance of features makes the KX-series versatile in
usage, as a stage monitor, as a stand-alone fullrange speaker mounted on speaker stands for vocal or acoustical performances,
or together with subwoofers (KS15A or KS18A) in a powerful active sound system.
Fitted with 14 x M10 cage nuts for rigging, flying or installing, fully covering protective perfored steel grille with speaker foam behind, two handles, top hat for mounting on stand.
Features:
• Built-in amplifiers
• Top hat for mounting on speaker stand
• Low profile cabinets
• Mick/Line select on input
• Fullrange frequency response
• 14 x M10 rigging/flying points
KX10A
KX12A
Construction
two-way active, coaxial,
front-loaded bass reflex
Two-way active, coaxial,
front-loaded bass reflex
Components
LF: 10” (320mm)
HF: 1” (25 mm.)
LF: 12” (320mm)
HF: 1” (25 mm.)
Nominal impedance
8 ohm
8 ohm
Power handling RMS
200W
250W
Power handling cont..
400W
500W
Frequency response
70Hz-20kHz
60Hz-20kHz
Axial sensitivity
96 dB, 1W/1m.
97dB, 1W/1m.
Max calc. SPL
122dB
124dB
Dispersion H x V
80 x 80
80 x 80
Connectors
Balanced XLR/TELE in
XLR link out
Balanced XLR/TELE in
XLR link out
features
Line / mick select
Master volume
Ground lift
Line mick select
Master volume
Ground lift
Weight
12 kg.
17 kg.
Dimensions mm.
H360 x W420 x D290
H400 x W502 x D345
• Wedged stage monitor
• Two handles.
• 350W amplifiers
61
Download PDF