Headline eng

A339227 - 05/10
FRACARRO’S PROFESSIONAL SOLUTION FOR EVERY HEADEND APPLICATION
-
COFDM modulators
PAL modulators
DVB-S, DVB-S2, DVB-T receivers
IP encoders
- Fibre optic
- Controller host
- Subracks
- Accessories
»
Headline is the new professional range for television signal distribution in:
Large residential dwellings
Holiday villages
Prestigious installations (airports, embassies, agencies, etc.)
»
»
»
Hospitality
»KEY POINTS
Professional installations
Flexibility
System reliability
Constant operation of the installation
Remote control
Compact size
»
»
»
»
»
»
19” rack mounting
Easy integration of different modules
Modules powered by their own power supply unit
Hot insertion
Controller host unit to get access to the headend via PC, Ethernet or GSM
Maximises the number of modules contained in one 19” rack
1«
A complete range of products
to receive and distribute
television signals in large
networks. Advanced technology
makes the Headline range
powerful and highly innovative.
»2
»
HIGHLY
PROFESSIONAL
INNOVATIVE
FLEXIBILE
The new modular Headline range
has been designed for installation
in a 19” rack cabinet. High
performances are required on each
product in this range.
Different technological solutions
(analogue and digital modulators, IP
encoders, fibre optic modules) make
Headline highly innovative
The Headline range is extremely
flexibile to install as different types
of modules can be integrated easily.
VERY
EFFICIENT
COMPACT SIZE
EASY INSTALLATION
EASY MAINTENANCE WITH
REMOTE CONTROL
To guarantee the constant operation
of the installation (even if a few
modules are temporarily unavailable), each device is equipped with
its own power supply. Therefore, no
need for power supply redundancy.
Moreover, the hot insertion of
modules means they can be installed
or replaced while the whole system
continues to operate.
Compact devices - height 13cm
(3U), width 3.5cm (7e) – allows large
numbers of modules to be installed.
11 units can be fitted in one row and
up to 95 modules can be fitted in a
cabinet.
Premounted 19” subrack to install the
modules in a 19” rack cabinet with
interconnection module included,
enables the installer to easily fit the
racks in the cabinet and to add new
headline modules.
Thanks to a controller host unit, all
modules can be remotely controlled
and monitored via PC, Ethernet or
GSM
3«
PAL
cofdm*
ip*
ts*
dvb-s*
sig7310/30
sig7321/30
+
sig728x
sig7330
+
sig7120
sig7710
sig7330
dvb-s_ci*
sig7320/40
sig7320/40
+
sig728x
sig7340
+
sig7120
sig7340
+
sig7720
sig7340
dvb-s2_ci*
sig7100
sig7100
+
sig728x
sig7100
+
sig7120
sig7100
+
sig7720
sig7100
dvb-t *
sig7530/31
sig7530/31
+
sig728x
sig7531
+
sig7120
sig7730
sig7531
dvb-t_ci*
sig7540
sig7540
+
sig728x
sig7540
+
sig7120
sig7540
+
sig7720
sig7540
Analogue
a/v
-
sig7281
sig7282
sig7282s
sig7404
+
sig7121
sig7404
+
sig7121
sig7404
Professional
asi*
-
-
sig7121
sig7721
-
ts*
-
-
sig7120
sig7720
-
sat
Headline
Solutions
»
out
A/V
in
ddt
* MPEG2/MPEG4 compliant
»4
»SIG7120
(code 283950)
Modulator TS
COFDM
Item
SIG7120
Transport
Stream
input
The SIG7120 modulates to DVB-T
standard (using COFDM modulation)
a signal received from the transport
stream on the back panel. It is mainly
used with signals coming from the
digital receiver SIG7100. Up to 3
modulators can be used with one
receiver and are connected through the
back panel.
On the front panel there are F
connectors for mixing in signals and
COFDM. LCN embedded and MPEG4
compliant.
»
TECHNICAL DATA
»
Output signal
General
features
Connector
Type
Maximum bitrate
Output connector
Output frequency
Frequency step
Maximum output level
Level adjustment
Loop-through loss
Carrier
Modulation
FEC
Guard interval
Spectrum
MER
Mains voltage
Power consumption
Dimensions (rack version)
Operating temperature
48 poles on the back-panel
Parallel
100Mbit/s
F female
108–862MHz
10KHz
85dBµV
0-15dB
< 1.5dB
2K, 8K
QPSK, 16QAM, 64QAM
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8,1/16, 1/32
Normal/Inverted
38dB
220-240V~, 50-60Hz
11W
35.5 (7e) × 133.3 (3U) × 240mm
-10 to +45°C
KEY POINTS
• Modulator with TS input on the back panel
• LCN embedded
• Remote configuration and monitoring (via controller host SIG7905 and
FHM software).
• F connector for mixing in signals and COFDM signals
• HD compliant
• Modular solution (up to 3 modules can share the same TS Input)
• MPEG2/MPEG4 compliant
5«
»SIG7282
»SIG7282S
(code 283943)
(code 283944)
Audio Video Modulators
»SIG7281
(code 283933)
Extracting hole
Audio video modulators. Double
conversion, double saw filter
and tracking filter built in.
One module covers the whole
47-862MHz band, very high C/N
ratio to allow the distribution of
more than 95channels.
Available in PAL B/G mono
(SIG7282), PAL B/G stereo
(SIG7282S) and multistandard
(SIG7281).
»
Audio/video input,
RCA connectors.
FRONT PANEL
RF input, to mix
the existing signal from
the other modules
RF output
Extracting hole
KEY POINTS
• Fully agile VSB modulators with double conversion, saw filter and tracking
filter built in, to distribute more than
95 channels in one headend. One
module covers the whole 47-862MHz
band simplifying the installation and
maintenance of the system
• Audio carrier level adjustment
• Very high C/N in any output setting
condition (80-95dBuV)
• High output level, 95dBuV
• RCA (cinch) connectors for audio and
video input/output, F connectors for
RF input/output
• Modulators are available in PAL B/G
mono, PAL B/G stereo and multistandard
• Cable and accessories included in the
packaging
• Remote configuration and monitoring
Accessories included in the
packaging:
• KPR41 solid bridge used to mix the
signal
• CV-RCA/HQ high quality RCA cable
»6
»
»
»
Item
SIG7282 (code 283943)
SIG7282S (code 283944)
SIG7281 (code 283933)
SIG7282
Video signal input
Left and right audio input
Audio Video Modulators
Impedence
Level
Impedence
Nominal input level
Audio carrier frequency
B/G standard mono or left carrier
right carrier
Standard H
Standard L D/K
Standard I
Standard N
Video/audio power carrier ratio
TRACKING FILTER
FUNCTIONALITY
»TARGET:
to cut
the noise
in the band
TECHNICAL DATA
»
Standard N
Standard H
Standard I
Standard D/K
Standard L
Standard B/G:
Mono (5.5MHz)
Stereo (5.742MHz)
Modulation with audio input 1kHz, 0.5Vrms
B/G
N (FM)
H
I, D/K (FM)
L (AM)
SIG7281
75 Ohm
0.7-1.4Vpp
Standard
SIG7282S
PAL B/G
mono
10KOhm
0.5-3.5Vpp
B/G
Stereo A2
5.50MHz
-
5.50MHz
5.74MHz
-
5.50MHz
6.50MHz
6.00MHz
4.50MHz
13dB
-
13dB
20dB
10dB
14dB
14dB
13dB
8dB
-
45KHz
-
45KHz
-
49KHz
42KHz
44KHz
>47KHz
80%
SIG7282
SIG7282S
D/K, I, L, N, H
Item
Output frequency (channels)
Output level
Level adjustment
Loop-through attenuation
Return loss
C/N in the channel N ±3
C/N ±40MHz
S/N in the channel
S/N with 80 channels
Spurious rejection
Mains
Consumption
Operating temperature
Dimensions (rack version)
EMC
SIG7281
47-862MHz (E2-E69)
95dBµV+/-2dB
15dB by 1dB steps
<1.5dB @ 860MHz
>10dB
>66dB
>70dB
50dB
48dB
>60dB
220-240Vac, 50-60Hz
8W
-10 to +45°C
35.5 (7e) x 133.3 (3U) x 240mm
EN50083-2, EN60065
7«
»SIG7100
(code 283949)
Receiver DVB-S/S2
TS
Extracting hole
The SIG7100 module, using its Common
Interface slot, distributes a free-to-air or
encrypted digital signal from satellite in
DVB-S1 or DVB-S2 standard.
It enables the audio/video signal to be
available in a transport stream form
distributed on the back-panel.
In a typical application, it can be
connected to an SIG7120 module
(modulator) that, using the transport
stream flow, creates a COFDM multiplex.
It can also be connected to an IP Encoder
SIG7720 creating more IP multicast
streaming.
SAT in, SAT out
»
Common Interface
FRONT PANEL
RCA outputs
Extracting hole
»8
KEY POINTS
• CI slot available to decode
the
encrypted
programs.
Compatible with more than
150 existing CAM
• Guaranteed compatibility
with future CAM’s by software
update
• It can generate 14 or 18V,
22KHz tone and DiSEqC 1.0,
suitable to feed LNB or to
control multiswitch output
• Loop-through input for the
connection of several receivers
on the same SAT polarity
• P r o g r a m m a b l e v i a F H M
software
• MPEG2/MPEG4 compliant
»SIG7100
(code 283949)
Receiver DVB-S/S2
TS
Item
SIG7100
SAT input
»
Common Interface
TECHNICAL DATA
Audio/video output
TS output
General features
Frequency input
Input level
Input frequency step
Loop-through insertion loss
AFC
Symbol rate for DVB-S
Symbol rate for DVB-S2
DiSEqC
Connector
Standard
Output connector
Standard Video
Video format
Video level
Audio format
Audio level
SINAD
Video decoder
Audio decoder
Connector
Type
Mains voltage
Power consumption
Dimensions (rack version)
Operating temperature
950-2150MHz
48-85dBµV
1MHz
2dB
±5MHz
2-40MSy/s
2-30MSy/s
1.0 4 position 0/14/18V 0/22KHz
PCMCIA
EN50221, TS101699
RCA Female
PAL, SECAM, NTSC
16/9, Letter Box, Pan & Scan
1Vpp typical
Mono, Mono lang.
550mV rms max.
45dB
MPEG-2 ML@MP
MPEG-2 Layer I and II
48 pin on the back-panel
Parallel
220-240V~, 50-60Hz
11W
35.5 (7e) × 133.3 (3U) × 240mm
-10 to +45°C
9«
»SIG7320
(code 283940)
»SIG7340
(code 283955)
QPSK receivers with CI
Extracting hole
QPSK receivers with Common Interface
slot to receive free-to-air or encrypted
digital satellite programs available
on audio/video outputs (RCA cinch
connectors) or on Transport Stream
(SIG7340).
Loop-through output for the connection
of several receivers at the same SAT
polarity.
SAT in, SAT out
»
Common Interface
FRONT PANEL
Audio/video output,
RCA connectors
Extracting hole
» 10
KEY POINTS
• CI slot available to decode
the
encrypted
programs.
Compatible with more than
150 existing CAM
• Guaranteed compatibility
with future CAM’s by software
update
• It can generate 14 or 18V,
22KHz tone and DiSEqC 1.0,
suitable to feed LNB or to
control multiswitch output
• Loop-through input for the
connection of several receivers
on the same SAT polarity
• P r o g r a m m a b l e v i a F H M
software
• HD compliant
• RCA outputs
• MPEG2/MPEG4 compliant
»SIG7320
»SIG7340
(code 283940)
(code 283955)
QPSK receivers with CI
Item
SAT input (QPSK)
TECHNICAL DATA
»
Common interface
SIG7320
Input frequency
Input level
Input frequency step
Loop-through insertion loss
DiSEqC
AFC
Symbol rate
Connector
Standard
Output connector
Colour standard
Video format
Audio/video outputs
Transport Stream output
General features
Output video level
S/N not weighted
Audio format
Max. audio level
Sinad
Video decoder
Audio decoder
Connector
Type
Mains voltage ~
LNB power supply
Power consumption
Compliant
Dimensions (rack version)
Operating temperature
30-85dBµV
SIG7340
950–2150MHz
48-85dBµV
1MHz
2dB
1.0 4 position - 0/14/18V 0/22KHz
±3MHz
±5MHz
2-40 MS/s
PCMCIA
EN50221, TS101699
RCA Female
PAL, SECAM, NTSC
16/9, letter box, pan scan,
16/9, letter box, pan scan
combined, 16/9
1Vpp@75Ω
1Vpp typical
>65dB
Mono/Mono Language 1/ Mono Language 2/Stereo
550mV rms
45dB
MPEG-2 ML@MP
MPEG-2 Layer I and II
48 pin on the back-panel
Parallel
220-240Vac, 50-60Hz
max. 200mA@14V
11W
EN50083-2, EN60065
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45°C
11«
»SIG7310
(code 283938)
»SIG7330
(code 283954)
QPSK free-to-air receivers
Extracting hole
SAT in, SAT out
QPSK receivers with audio/video
outputs on RCA (cinch) connectors or on
Transport Stream (SIG7330) to receive
free-to-air digital satellite programs.
One input and one loop-through output
to connect several receivers
on the same SAT polarity.
»
FRONT PANEL
Audio/video output,
RCA connectors.
Extracting hole
» 12
KEY POINTS
• It can generate 14 or 18V,
22KHz tone and DiSEqC 1.0,
suitable to feed LNB or to
control multiswitch output
• Loop-through input for the
connection of several receivers
on the same SAT polarity
• P r o g r a m m a b l e v i a F H M
software
• HD compliant
• RCA outputs
• MPEG2/MPEG4 compliant
Accessories included
in the packaging:
• KPR41 solid bridge used to
loop-through the input satellite
signal
»SIG7310
»SIG7330
(code 283938)
(code 283954)
QPSK free-to-air receivers
Item
QPSK input
TECHNICAL DATA
»
SIG7310
Input frequency
Input level
Input frequency step
Loop-through loss
AFC
Symbol rate
LNB power supply
DiSEqC
Demodulation
Video decoder
Mpeg2
Video bit rate
Colour system
Output connector
Video type
Video format
Audio/Video output
Output video level
S/N weighted
Video decoder
Audio format
Transport stream output
General features
Max. audio level
Audio decoder
Connector
Type
Mains
Compliant
Consumption
Dimensions (rack version)
Operating temperature
43-84dBµV
SIG7330
950-2150MHz
1MHz
48-85dBµV
+4 to -6dB
2dB
±3MHz
±5MHz
1-40Ms/s
2–40Ms/s
0/14/18V, 0/22KHz, max. 200mA@14V
1.0 4 positions
ETS 300421
ISO-IEC 13818-1
Main level @ Main profile
1.5-15Mbit/s
PAL, SECAM, NTSC
RCA Female
Composite
Normal, letter box,
16/9, letter box,
pan scan
pan scan, combined, 16/9
1Vpp – 75Ω on RCA connector
>65dB
45dB
MPEG-2 ML@MP
Mono, Mono lang 1, Mono
Mono/Stereo/Dual sound
lang 2, Stereo
600mV rms
550mV rms
MPEG-2 Layer I and II
48 pin on the back-panel
Parallel
220-240Vac, 50/60Hz
EN60065: 2004-06, EN50083-2: 2002-05
10W
11W
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45ºC
13«
»SIG7530
(code 283937)
»SIG7531
(code 283952)
»SIG7540
(code 283951)
COFDM receivers
Extracting hole
KEY POINTS
COFDM receivers with audio/video
outputs on RCA (cinch) connectors or on
Transport Stream to receiver free-toair (SIG7530, SIG7531) and encrypted
(SG7540) digital terrestrial programs.
One input and one loop-through output
to connect several receivers to the
same antenna.
TV in, TV out
»
Common Interface
FRONT PANEL
Audio/video output,
RCA connectors.
Extracting hole
» 14
• Software download possible
on the installation site
• Loop-through input for
the connection of several
receivers
• HD compliant
• RCA outputs for testing
or the distribution of one
MPEG2 compressed
program
• MPEG2/MPEG4 compliant
»SIG7530
»SIG7531
»SIG7540
(code 283937)
(code 283952)
(code 283951)
COFDM receivers
Item
COFDM input
TECHNICAL DATA
»
Common
interface
Video output
Audio output
Transport
Stream output
General
features
SIG7530
Input frequency
Input level
Bandwidth
Loop-through bandwidth
Input frequency step
AFC
Loop-through loss
Number of carriers
Symbol rate
Modulation
Hierarchy
Guard interval
FEC
Demodulation
Mpeg2
Connector
Standard
Output connector
Colour system
Video format
Output video level
S/N unweighted
Video Decoder
Audio format
Max. audio level
Audio Decoder
Connector
Type
Mains voltage
Compliant
Consumption
Dimensions (rack version)
Operating temperature
SIG7531
35-80dBµV
-2 to 3dB
Normal, letter box,
pan scan, wide
>65dB
Mono/Stereo/Dual
sound
600mV rms
5W
SIG7540
174-230MHz + 470-862MHz
30–80dBµV
7MHz - 8MHz
47-862MHz
167KHz
±285KHz (2K) / ±142KHz (8K)
1dB
2K, 8K
2-30Ms/s
QPSK, 16QAM, 64QAM
High priority - Low priority
¼, 1/8, 1/16, 1/32
½, 2/3, ¾, 5/6, 7/8, auto
ETS 300744
Main level @ Main profile
PCMCIA
EN50221, TS10169
RCA female
PAL, SECAM, NTSC
16/9, letter box, pan scan, combined, 16/9
1Vpp – 75Ω on RCA connector
45dB
MPEG-2 ML@MP
Mono, Mono lang 1, Mono lang 2, Stereo
550mV rms
MPEG-2 Layer I and II
48 pin on the back-panel
Parallel
220-240Vac, 50-60Hz
EN60065: 2004-06, EN50083-2: 2002-05
11W
35.5 (7e) × 133.3 (3U) × 240mm
-10 to +45 ºC
15«
»SIG7404
Analogue
(code 287075)
MPEG-2 TS Encoder
Item
SIG7404
The SIG7404 module encodes 4 analogue
inputs.
It enables the audio/video signals to
be available in the transport stream in
an MPEG2 form, distributed on the ASI
output.
In a typical application, it can be
connected to the SIG7121 module
(modulator) that, using transport stream
flow, creates a COFDM multiplex. It
can be also connected to an IP encoder
SIG7721 creating many IP multicast
streams.
It supports PAL and NTSC standards
Input
»
TECHNICAL DATA
»
Output
Coding
General
features
Video connectors
Video format
Audio connectors
Type
Max. bit rate
Effective bit rate
Connector
ASI mode
Video standard
Video bit rate
Audio
Audio rate
Audio sampling rate
Output connector
Standard Video
Video format
Mains voltage
Power consumption
Dimensions
Operating temperature
CVBS, S-Video
PAL, NTSC
Analog balanced
DVB-ASI
170Mbps
1-15Mbps
BNC, 75 Ohm
BYTE
MPEG-1, MPEG-2 MP@ML(4:2:0)
2.5-15Mbps
MPEG-1 Layer I, Layer II
32, 64, 128, 192, 256, 384Kbps
32, 44.1, 48KHz
ASI
PAL, NTSC
Full D1, Half D1, SIF, QSIF
220-240V~, 50-60Hz
30W
318 × 483 × 44mm
-10 to +45°C
KEY POINTS
• Supports 4 input AV signals with coding and multiplexing
• Ideal solution for AV to COFDM conversion (with SIG7121) and AV to IP
conversion (with SIG7721)
• Standard video channel MPEG-2 coding
• Bit rate 1 - 15Mbps
• Formats supported are Full D1, Half D1, SIF, QSIF
• Supports PAL and NTSC
» 16
»SIG7121
(code 283953)
COFDM modulator with ASI input
Item
SIG7121
ASI input
Back panel
TS input
The SIG7121 modulates to DVB-T
standard (using COFDM modulation) a
signal received in the ASI input. It is
mainly used with signals coming from an
SIG7404 analogue to ASI 4 IN converter.
Additional COFDM modulator can use
the same ASI input through back panel
connection. LCN embedded.
»
TECHNICAL DATA
»
Output signal
General
features
ASI connector
Max. bit rate
Connector
Type
Maximum bit rate
Output connector
Output frequency
Frequency step
Maximum output level
Level adjustment
Loop-through loss
Carrier
Modulation
FEC
Guard interval
Spectrum
MER
Mains voltage
Power consumption
Dimensions (rack version)
Operating temperature
BNC, 75 Ohm
216
48 poles on the back-panel
Parallel
100Mbit/s
F female
108–862MHz
10KHz
85dBµV
0-15dB
< 1.5dB
2K, 8K
QPSK, 16QAM, 64QAM
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8,1/16, 1/32
Normal/Inverted
38dB
220-240V~, 50-60Hz
11W
35.5 (7e) × 133.3 (3U) × 240mm
-10 to +45°C
KEY POINTS
• COFDM modulator with ASI input on the front panel
• LCN embedded
• Up to 3 additional COFDM modulators (SIG7120) can share the same ASI/
TS input
• Remote configuration and monitoring (via controller host SIG7905 and
FHM software)
• HD compliant
• F connector for mixing in signals and an RF output for modulated signals
• MPEG2/MPEG4 compliant
17«
»SIG7710
(code 283945)
IP encoders
»SIG7730
(code 283946)
»SIG7720
(code 283947)
Extracting hole
Encoders that work as a DVB-S (SIG7710)
and as a DVB-T (SIG7730) to IP gateway.
Satellite and Digital Terrestrial
Television signals are received on the
F connector input, converted to IP
standard signals and streamed through
RJ45 output port into LAN.
SIG7720 is an encoder that works from
Transport Stream (TS) to IP gateway.
Input signals can be received from
either an SIG7100 module (DVB-S2 to
TS) or an SIG7540 module (DVB-T).
KEY POINTS
RF in
»
RF out
FRONT PANEL
Ethernet out
Extracting hole
» 18
• Programs and services
delivered as multicast
• Bandwidth optimisation,
streaming the modules only
upon customers’ request
• Very easy and user-friendly
system set-up
• Remote control and
monitoring
• HD compliant
• MPEG2/MPEG4 compliant
SIG7710
»
SIG7730
»
»SIG7720
(code 283945)
(code 283946)
(code 283947)
IP encoders
Item
Input frequency
Input frequency step
AFC
2K
8K
Loop-through loss
Input level
Return loss
TECHNICAL DATA
»
Input
LNB power supply
DiSEqC
Demodulation
Symbol rate
FEC
Common Interface
Output
General features
Carrier
Modulation
Hierarchy
Timeguard
Connector
Standard
Connectors
Encoding standard
Type of streaming
LAN interface
Encoding
Web services
Power supply
Consumption
Dimensions (rack version)
Operating temperature
SIG7710
SIG7730
950–2150MHz
1MHz
±3MHz
174-230MHz, 470-862MHz
166.7KHz
SIG7100 + SIG7720
SIG7540 + SIG7720
950–2150MHz
174-230MHz, 470-862MHz
1MHz
166.7KHz
±5MHz
±285KHz
±285KHz
±142KHz
±142KHz
<1.5dB
<1.5dB
<2dB
<1dB
40-84dBμV
0-80dBμV
48-85dBμV
30-80dBμV
10dB
0/14/18V, 0/22KHz,
14/18V, 0/22KHz,
200V@14V
200V@14V
1.0
1.0
ETS 300421
ETS 300744
ETS 300421
ETS 300744
2–35 MS/s
2–40MS/s
2-30Ms/s
1/2, 2/3, 3/4, 5/6, 7/8,
1/2, 2/3, 3/4, 5/6, 7/8,
1/2, 2/3, 3/4, 5/6, 7/8, auto
auto
auto
2K, 8K
2K, 8K
QPSK, 16QAM, 64QAM
QPSK, 16QAM, 64QAM
High / low priority
High / low priority
1/4, 1/8,1/16, 1/32
1/4, 1/8,1/16, 1/32
PCMCIA
EN50221, TS101699
RJ 45 Ethernet LAN IEEE 802.3 100 base T
ETSI TS102034
Multicast/Unicast
IEEE 802.3 100BaseT
ETSI TS102034
DVB Encapsulation, http, TELNET, FTP, SAP
220-240Vac, 50-60Hz
11W
4W
8W
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45°C
* Technical specifications written in light grey refer to SIG7100 and SIG7540 items
19«
»SIG7600 - HTX
(code 270678)
HTX Optical transmitter
SIGNAL TO NOISE RATIO
TECHNICAL DATA
Optical transmitter
that converts an
RF TV-SAT frequency
band into an optical
signal.
»
Optical wavelength
Optical output power
Optical return loss
RF bandwidth
Flatness TV (47-862)
Flatness SAT (950-2150)
Link flatness* (47-2150)
RF Input level**
RF Return loss
SNR
Input impedance
RF Connector
Optical connector
Operating voltage
Power consumption
Operating temperature
Dimensions (rack version)
Mounting***
1,100-1,600nm
1,310mw (dBm)
>55dB
47-2150MHz
±1dB
±2dB
±2.5dB
80-85dBμV (opt. 85)
>10dB
see table
75 Ohm
F female
SC/APC single mode
220-240Vac, 50-60Hz
4W
-10 to +45°C
35.5 (7e) x 133.3 (3U) x 240mm
Rack 3u
68
70
10dB
64
66
68
12dB
60
62
64
66
14dB
56
58
60
62
63
16dB
102
»
98
94
6dB
8dB
106
90
52
54
56
58
59
60
18dB
86
50
52
54
55
56
57
20dB
82
48
50
51
52
53
53
78
46
47
48
49
49
74
43
44
45
45
70
40
41
41
81
85
89
93
97
110
CH
Max
42
CH
Max
15
CH
Max
5
CH
Max
2
CH
Max
77
* link made with HTX-KRX
** 42 channels, regulation EN50083-3, CTB > 60dB, CSO > 60dB
*** mandatory to use subrack code no. 283930
» 20
Optical attenuation (dB)
KRX
Output level
per channel (dBμV)
HTX
Input level
per channel
(dBμV)
Number of
channels
2
4
6
8
10
15
20
30
42
56
77
110
Max. level
per channel
(dBμV)
97
94
92
91
90
89
88
86
85
84
83
81
»SIG7622
(code 270687)
Optical splitters
Optical splitters
split the optical
signal into two
outputs (SIG7622)
or into four
outputs (SIG7624)
»SIG7624
(code 270688)
Item
»
TECHNICAL DATA
»
SIG7622
Wavelength
No. of outputs
Insertion loss
Return loss
Isolation
Operating temperature
Dimensions (rack version)
SIG7624
1310, 1550mm
1310, 1550mm
2
4
3.2dB
6.4dB
>50dB
>50dB
>50dB
>50dB
-10 to +45°C
35.5 (7e) x 133.3 (3U) x 240mm
l
21«
»SIG7905
(code 283941)
Controller Host
Item
SIG7905
Module for local and remote
connectivity of the professional
Headline headends via Ethernet
(LAN or WAN) and GSM.
Fracarro Headend Management
(FHM) software enables the
headend devices’ firmware to be
updated remotely.
Firmware can also be upgraded
(both for SIG7905 and for the other
modules) by using USB memory
stick.
For monitoring and remote
configuration of all Headline
modules.
» 22
»
TECHNICAL DATA
General
features
Mass memory
Connection to external peripheral
units
Connection to the Ethernet network
Connection to pen drive
Digital video input
Front key to change status (temporary
suspension of the Controller Host –
Master/Slave activities)
Mains
Consumption
Dimensions (rack version)
Operating temperature
Compliant to
SD slot (SD card not supplied)
RS-232 serial port
Ethernet RJ-45
USB 1 (200mA), USB2 (400mA)
RJ-45 10-pole connector
Key to change status
220-240Vac, 50-60Hz
4W
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45°C
EN50083-2, EN60065
»Fracarro Headend Management
(code 289888)
Programming software for Fracarro headends
This software allows full
management of K Series, SAF,
SIG9708CI and Headline headends.
Fracarro Headend Management
(FHM) enables all configuration
parameters to be changed both
locally and remotely by using
Controller Host SIG7905.
KEY POINTS
»
• For remote configuration and
monitoring
• Using FHM with the controller
host SIG7905 critical
parameters of connected
modules can be viewed both
locally and remotely
• For user defined parameters,
an upper and lower alarm
limit can be set
23«
»SIG7901
(code 283930)
19” Sub-rack
DIMENSIONS SIG7901
SLOTS AVAILABLE
19”sub-rack to be installed in a 19”
rack cabinet. Interconnection module
SIG7900 included. 11 modules can be
fitted.
SIG7901 is fully mounted, with all the
accessories included in the packaging.
»
Length
Height
Depth
12 (one
48.3cm
13.3cm
28.8cm
SIG7900 + eleven other modules)
TECHNICAL DATA FOR INTERCONNECTION MODULE SIG7900
TECHNICAL DATA
Mains
Consumption
Back panel connections
Dimensions (rack version)
Operating temperature
Compliant to 220-240Vac, 50/60Hz, class II
2W max. (standalone)
100W max. (with all the modules connected)
220Vac, RS485, address line
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45°C
EN50083-1, EN50083-2, EN60065
Accessories included in the packaging:
• Mains cord
• Extracting tools, to extract the module from the sub-rack
• Channel and module labels
• Interconnection module SIG7900
» 24
»SIG7902
(code 283939)
Wall mount for 6 modules
DIMENSIONS SIG7902
SLOTS AVAILABLE
19”sub-rack to be installed on a
wall. Interconnection module SIG7900
included. 6 modules can be fitted.
SIG7902 is fully mounted, with all the
accessories included in the packaging.
»
Length 31.4cm
Height 13.3cm
Depth 29.8cm
7 (one SIG7900 + six other modules)
TECHNICAL DATA FOR INTERCONNECTION MODULE SIG7900
TECHNICAL DATA
Mains
Consumption
Back panel connections
Dimensions (rack version)
Operating temperature
Compliant to 220-240Vac, 50/60Hz, class II
2W max. (standalone)
100W max. (with all the modules connected)
220Vac, RS485, address line
35.5 (7e) x 133.3 (3U) x 240mm
-10 to +45°C
EN50083-1, EN50083-2, EN60065
Accessories included in the packaging:
• Mains cord
• Extracting tools, to extract the module from the sub-rack
• Channel and module labels
• Interconnection module SIG7900
25«
»Accessories
»SIG7900
(code 283935)
Interconnection module
FRONT PANEL
Interconnection module to power
and address the Headline modules,
installed in the SIG7901 and
SIG7902 sub-rack. Allows the
distribution of mains voltage to
power all the modules installed in
the same row.
Moreover, it distributes the data
bus to address and control the
modules. Available in single
packaging.
» 26
Mains
220-240Vac, 50/60Hz, class II
»
Consumption
2W max (stand alone)
100W max (with all the modules
connected)
TECHNICAL DATA
Operating temperature
-10 to +45°C
Back panel connections
220Vac, RS485, address line
Dimensions
35.5 (7e) x 133.3 (3U) x 240mm
Compliant to
EN50083-1, EN50083-2, EN60065
Extracting hole
Mains socket
RJ45 input socket, to connect the
module to the previous SIG7900
in the headend
Display to show the line number to
get access to the modules in the
row
RJ45 output socket, to connect the
module to the following SIG7900
in the headend
Extracting hole
»Accessories
»SIG7903
(code 283928)
Spacer kit
Spacer kit to allow
the 19”subrack
SIG7901 to be mounted
further back than the
other equipment
in the 19”rack cabinet.
»SIG7904
(code 283927)
Front plate
»
Front plate to be used with
SIG7901 and SIG7902 to
cover empty slots.
Height = 3U
Width = 7e
Packaging = 5 pieces
Screws included in the bag
»
27«
»Accessories
»TPE
(code 282733)
Programming unit for K series
and Headline series
Programming unit with numeric
keypad and graphic display.
Enables the programming
of all modules in the Headline range.
» 28
»
Power supply
Consumption
Operating temperature
Connection
Display
Keypad
Interface
TECHNICAL DATA
5V (RJ45 connector, pin 1)
600mW
-10 to +45°C
RJ45, USB type B
LCD graphic backlit display, 16x4 characters
18 buttons
RS485 (RJ45 pin2=A, pin3=B)
UART (RJ45 pin5=RX, pin6=TX)
USB
Features
• Compatible with all K-series modules
(emulates the KTP for original modules)
• Compatible with all headline modules
• USB drivers available for PC connection
• USB rate: from 9,600 to 115,200bit/s
• RS485 rate: from 9,600 to 115,200bit/s
• UART rate: from 9,600 to 115,200bit/s. TTL level (0-5V)
• Menu language available: Italian, English, German, French, Spanish and
Portuguese
• Max addressable modules: 253
• Copy function available, to copy the settings from one device to another
• Adjustable contrast (31 steps)
»
29«
A339227 - 05/10
www.fracarro.com
FRACARRO RADIOINDUSTRIE S.p.A.
Via Cazzaro 3, p.o. box 213
31033 Castelfranco Veneto (TV)
Tel +39 0423 7361, fax +39 0423 736 220
info@fracarro.com
Società a socio unico
»
Fracarro France S.A.S.
7-14 rue du Fossé Blanc
92622 Gennevilliers
Cedex
France
Tel +33 1 47283400
Fax +33 1 47283421
Fracarro Iberica
Poligono Tactica
Ciudad de los negocios
46988 Paterna - Valencia
España
Tel. +34 961340104
Fax +34 961340691
Fracarro Polska
Sp. z o.o
ul. PÅowiecka 109A
04-501 Warszawa
Polska
Tel. +48 22 812 07 48
Fax +48 22 812 65 27
Fracarro Tecnologia
e Antenas de Televisao
Lda
Rua Alexandre
Herculano, n° 1-1° B
Edificio Central park
2795-242 Linda-a-Velha
Portugal
Tel. +35 121 4156800
Fax +35 121 4156809
Fracarro (UK) Ltd
Unit A.
Ibex House, Keller Close
Kiln Farm, Milton
Keynes.
MK11 3LL
UK
Tel. +44(0)1908 571571
Fax +44(0)1908 571570
Also for Headline headends, Fracarro has extended its warranty to 4 years.
For further information visit our website www.fracarro.com
Download PDF