914G
®
Wheel Loader
IT14G
Integrated Toolcarrier
Cat® 3054C DIT Engine
Gross Power
Net Power
Maximum Operating Weight
914G
IT14G
Bucket Capacities
75 kW/101 hp
72 kW/96 hp
7950 kg
8450 kg
1.2 to 1.4 m3
914G Wheel Loader and IT14G Integrated Toolcarrier
The 914G/IT14G defines world-class performance, value and reliability.
Performance
✔ The Cat 3054C DIT engine meets
the latest Stage II emissions criteria
and is performance matched with
a Cat hystat transmission for
smoothness and operator comfort.
pg. 4
Operator Station
Work Tools
Ergonomically designed for total
machine control in a comfortable,
spacious environment. All controls,
levers, switches, and gauges are
positioned to maximize productivity.
pg. 6
Caterpillar’s selection of general
purpose and multi purpose buckets are
designed to optimize performance.
A quick coupler (optional on the 914G)
maximizes productivity. pg. 8
The 914G and IT14G set the standard in it’s class
for rugged, reliable performance, responsiveness
and operating comfort.
✔ New feature
2
Owning and Operating Costs
✔ Cost saving features help improve
your bottom line. pg. 10
Serviceability
✔ Improved access and fewer
maintenance requirements provide
unparalleled ease of service.
pg. 10
Environmentally Responsible Design
Caterpillar machines not only help you
build a better world, they help maintain
and preserve our fragile environment.
pg. 11
Complete Customer Support
Caterpillar dealer services ensure
a longer machine operating life with
lower costs. pg. 12
3
Performance
Exceptionally tough, the rugged performance and improved gradeability of the 914G/IT14G
helps increase productivity.
Pistons. The pistons are three-ring,
controlled-expansion design.
Oil Pump. The 3054C uses a gear-driven
oil pump located in the oil pan.
Being mounted below the crankshaft
centerline allows the pump to prime
quicker and get up to pressure faster
to help reduce wear and extend engine
service life.
Fuel Pump and Fuel Filter. The 3054C
uses a highly dependable rotary
distributor-type fuel pump. The fuel
filter is integrated with an electric lift
pump located on the hystat cover for
easy serviceability. The electric lift
pump provides exceptional cold start
performance and automatic priming
during filter changes.
Water Pump. The gear-driven water
pump provides reliable performance
compared with belts that can break
and disable the engine.
Caterpillar Engine. The Caterpillar
3054C DIT (Direct Injection Turbocharged) engine has a proven reputation
for rugged, reliable operation while
providing peak performance in a wide
range of operating conditions.
Low Emission, Stage II Engine.
The standard 3054C DIT is a very low
emission engine designed to meet
today’s Stage 2 worldwide environmental
emission standards.
4
Cylinder Block. The 3054C cylinder
block features a deep skirted, internally
stiffened cast iron block. Extra stock is
used in the main bearing bulkheads for
added rigidity.
Steel Crankshaft. The 3054C features
a large diameter, hardened forged
chrome-molybdenum steel crankshaft
with wide main and rod bearings for
long service life.
Starting System. The starting system
for the 3054C is a 24V, 4.5 kW gear
reduction starter that incorporates
internal shielding to prevent inadvertent
starts. A glow plug starting aid is
standard for improved starting in
extremely cold temperatures.
Hydrostatic Transmission. The highpressure closed-loop hydrostatic
transmission delivers high performance
with a broader range of power and
performance to the ground.
Axles. Heavy-duty design features
strong gears and bearings for durable
performance. Oscillating rear axle helps
assure four-wheel ground contact for
optimum traction and stability.
Duo-Cone Seals on Axles. Patented
Duo-Cone Seals on the axle
and housing keep oil in and lock
contaminants out.
Differentials. A choice of standard
conventional or Limited Slip
Differentials adapts the machine
to a wide range of operating
conditions.
Final Drives. Planetary final drives
consist of ring gears and planetary
carrier assemblies.
Fixed Front, Oscillating Rear Axle.
The fixed front, oscillating rear axle
(±11 degrees) ensures four-wheel
ground contact for optimum traction
and stability.
Parking Brake. Parking brake features
include the following:
• Mechanical, shoe-type brake
• Mounted on drive line for positive
manual operation
• Transmission is automatically
neutralized when parking brake
is applied
Service Intervals. The recommended
engine oil change requirement is every
500 hours of operation.
Disc Brakes. Hydraulically-actuated
disc brakes are standard on both
front and rear axles which provide
improved performance and low-effort
operation.
5
Operator Station
Ergonomic design emphasizes comfort, visibility and easy operation.
Cab. The ergonomic cab provides
a comfortable work environment
with large windows, spacious
interior room, generous storage areas
and low interior sound levels.
6
Low-Effort Operation. Hydraulic pilot controls
give the 914G/IT14G uncompromised ease
of operation of lift and tilt functions. A remote
transmission control option adds a forward/
neutral/reverse control switch on the implement
lever for easier operation and enhanced
productivity. Third and fourth function controls
are also available for use with special work tools.
Hydrostatic, closed-center steering system
with flow amplification provides fast or slow
steering response, depending on the operational
requirement.
Right Side Console
Steering System. The adjustable
steering console lifts easily out of
the way. Dual suspended brake pedals
function as a brake and a transmission
neutralizer so the operator can maintain
high engine rpm for full hydraulic flow
and fast cycle times.
Optional Engine Speed Control (ESC).
A specific engine rpm can be set and
maintained with a switch in the cab.
Optional Creeper Control. The creeper
control option allows variable function
of travel speeds with full engine rpm.
Seating Options. The Comfort Series Seat
option is designed for maximum comfort
and fully-adjustable support.
Seat Belt. All seats include a comfortable
75 mm wide retractable seat belt.
Visibility. Visibility to critical areas such
as the bucket is optimized. Lift arm
spacing is wide and lineage geometry
maximizes visibility throughout the
production cycle.
Windows. Large windows with fulllength glass windshield featuring bonded,
tinted glass with silicon joints and fewer
obstructions allows expansive peripheral
visibility.
Access/Egress. A two-door design allows
easy access/egress. Both doors open fully
and lock flush against the cab. Steps
leading up to the cab are wide and angled
out for secure footing.
Customize the Cab. The cab can be
customized with:
• 12V converter for powering electronics
such as cellular phones, two-way radios
and music systems
• Radio installation package
• Sun visor for windshield
• Roll-down sun screen for rear window
• External mirror package
• Auxiliary lighting packages
Wipers. Front and rear wipers with
washers are standard on the G-Series
Cab. The front wiper is intermittent.
Storage. Generous storage space includes
a lockable compartment, coat hook and
special molded compartments designed
to hold a lunchbox/cooler, cup or can.
A tool box is also provided.
7
Work Tools
Caterpillar offers a wide range of work tools to match the 914G/IT14G to the job and
your specific application.
Buckets. With exceptional rimpull and high
breakout and lift forces, the 914G/IT14G
demonstrates strong performance as a bucket
loading machine. A wide range of Caterpillar
buckets are available including:
• General purpose
• Multi purpose
• Light material
• Material handling
Buckets resist high load twisting and distortion
and feature integral spill plates to help reduce
spillage. Choice of ground engaging tools
includes:
• Bolt-on cutting edges
• Bolt-on teeth
• Bolt-on segments
• Weld-on flush-mounted teeth
Versatility. With a variety of
work tools offered by Caterpillar,
the 914G/IT14G is ideal for
a wide range of applications.
8
Quick Coupler. Work tools can be
changed quickly and easily with
the integral quick coupler system,
standard on the IT14G and optional
on the 914G. A switch in the IT14G
cab activates a hydraulic cylinder
for positive tool engagement or
disengagement.
Material Handling. Exceptional visibility
and heavy-lift capabilities enable you to
work quickly and efficiently in material
handling applications. The additional range
of tools available on the IT14G include:
• Pallet forks
• Material handling arm
• Hydraulic brooms
Auxiliary Hydraulics. Optional 3rd (standard on
IT14G) and 4th function hydraulics are available for
use with work tools that require hydraulic power,
such as rotary brooms, augers, high dump and side
dump buckets.
Work Tool Controls. Work tool controls feature pilot
operated lift and tilt circuits with low effort singlelever control. Controls can be locked for roading.
IT14G 8-bar Parallel Linkage. 8-bar parallel linkage
on the IT14G simplifies keeping forks level throughout the range of lift, without adjustment. Longer lift
arms, taller front tower and higher pivot points offer
more lift, height and reach than conventional loaders.
Having more tilt capacity than lift in almost every
position provides superior load control.
9
Serviceability
Improved access and fewer maintenance requirements provide unparalleled ease of service.
S•O•SSM Ports. Scheduled Oil Sampling
ports are factory installed for improved
access to engine, transmission and
hydraulic oils. S•O•S ports make oil
sampling quicker, cleaner and provide
the best oil sample for analysis.
Oil Filters. Spin-on filters for engine oil and
hydraulic oil are vertically mounted for
easier servicing.
Extended Life Coolant/Antifreeze.
Cat Extended Life Coolant/Antifreeze
allows extended operation (up to
6000 hours) between changes.
Other Service Features. Other service
features include:
• Maintenance free driveshaft
• Stationary radiator and coolant hoses
• Standard hydraulic oil cooler
• Adjustment free brakes
• Grouped grease fittings
• Positive torque hose clamps
• Braided, color coded and numbered wiring
• Self priming electric fuel lift pump
Easy Access. One-piece engine
enclosure hood with gas struts lift
for exceptional access to filters
and service points. Radiator and
oil coolers are easily accessible
for cleaning.
Simplified Routine Service. All service
points are accessible from the ground
level. Easily check radiator coolant and
hydraulic oil levels with sight gauges.
Swing-Out Oil Cooler. A swing-out oil
cooler allows quick, easy cleaning and
service to the radiator.
Electrical System. The electrical system
is a 24-volt system. Standard machines
include two 12V (900 CCA) Caterpillar
maintenance-free batteries, easily accessible
inside the engine enclosure, and a charging
system equipped with an 80-amp alternator.
Owning and Operating Costs
Cost saving features help improve your bottom line.
Low Fuel Consumption. The 3054C DIT engine features
low fuel consumption for more economical operation.
Increased Power, Faster Cycle Times. Higher horsepower
and increased torque rise results in more power and faster
speed-on-a-grade, allowing the operator to get more work
done in a day.
10
Extended Service Intervals. Service intervals have been extended
to reduce machine service time and increase machine availability:
• 4000 hour hydraulic oil change (S•O•S sampling required)
• 1000 hour hydraulic filter change
• 500 hour engine oil change
Machine Security System Option. The Machine Security System
(MSS) option inhibits unauthorized machine use by immobilizing
vital electrical circuits.
Environmentally Responsible Design
Caterpillar machines not only help you build a better world, they help maintain and
preserve our fragile environment.
Low Exhaust Emissions. The Cat
3054C DIT is a low emission engine
designed to meet current worldwide
emission regulations and is Stage II
compliant.
Low Fuel Consumption. The 914G
and the IT14G get more work done in
a day resulting in less fuel consumed
and minimal impact on the
environment.
Ozone Protection. To help protect
the earth’s ozone layer, the air
conditioning unit uses only R-134a
refrigerant which does not contain
harmful chlorofluorocarbons (CFC’s).
Fewer Leaks and Spills. Engine oil
and hydraulic filters are positioned
vertically and are easily removed
without spillage. Cat O-ring face seals,
XT hose and hydraulic cylinders are
all designed to help prevent fluid leaks
that can weaken machine performance
and cause harm to the environment.
Rebuildable Components.
All major components are designed
for rebuildability.
Biodegradable Hydraulic Oil.
Caterpillar biodegradable hydraulic oil
can be used in the 914G/IT14G,
providing an environmentally-sound
alternative to mineral-based oils.
11
Complete Customer Support
Cat dealer services help you operate longer with lower costs.
Maintenance. More and more
equipment buyers are planning for
effective maintenance before buying
equipment. Choose from your dealer’s
wide range of maintenance services at
the time you purchase your machine.
Repair option programs guarantee
the cost of repairs up front.
Diagnostic programs such as S•O•S
Fluid Analysis and Technical Analysis
help you avoid unscheduled repairs.
Selection. Make detailed
comparisons of the machines you
are considering before you buy.
How long do components last?
What is the cost of preventive
maintenance? Your Cat dealer
can give you precise answers
to these questions to make sure
you operate your machines at
the lowest cost.
Services. Customer Service is critical
today in every business. That’s why so
many people buy Cat equipment.
They know they are getting quality
reliability and performance backed-up
with the best Customer Service.
Your Caterpillar dealer offers a wide
range of services that can be set up
under a Customer Support Agreement.
The dealer will help you choose a plan
that can cover the whole machine
including work tools, to help you to get
the best out of your investment.
12
Product Support. You will find a solution
for your parts requirements at your dealer.
Cat dealers utilize a worldwide network to
find in-stock parts to minimize downtime.
In addition your dealer can offer alternative
solutions like Reman, Classic Parts and
quality used parts to save money on
original Caterpillar components.
Service Capability. Whether in the dealer’s
fully equipped shop or in the field, you
will get highly trained service technicians
using the latest technology and tools.
Purchase. Consider the financing
options available as well as day-to-day
operating costs. This is also the time
to look at dealer services that can be
included in the cost of the machine
to yield lower equipment and owning
and operating costs over the long run.
Operation. Improving operating
techniques can boost your profits.
Your Cat dealer has training material
and ideas to help you increase
productivity.
Replacement. Repair, rebuild or
replace? Your Cat dealer can help
you evaluate the cost involved so
you can make the right choice.
Engine
Steering
Cat Engine 3054C DIT
Gross Power
Net Power
ISO 9249
EEC 80/1269
Bore
Stroke
Displacement
Steering Articulation
Steering Angle, each direction
Steering Cylinders, two, bore
Hydraulic Output at 2300 engine rpm
and 6900 kPa
75 kW/100 hp
72 kW/96 hp
72 kW/96 hp
105 mm
127 mm
4.4 Liter
• Caterpillar four-stroke cycle, four cylinder 3054C DIT
diesel engine. Stage II compliant.
• Ratings at 2300 rpm.
• Net power shown is the power available at the flywheel
when the engine is equipped with air clean, fan, muffler and
alternator.
• No derating required up to 2300 m altitude.
• Direct injection rotary fuel pump with individual
adjustment-free injection valves.
• Cast iron block with internally stiffened deep skirt design.
• Field replaceable dry cylinder liners.
• Replaceable valve guides and seats.
• Large diameter, hardened chrome-molybdenum steel
crankshaft.
• Three-ring controlled-expansion pistons lubricated
from oil jets.
• Helical steel front gear train.
• Electric fuel priming pump and fuel/water separator
are standard.
• Gear-driven oil pump located in oil pan.
• Gear-driven water pump.
• Direct electric 24V starting and charging system with two
12V 900 CCA Caterpillar maintenance free batteries and
80A alternator.
• Glow plug starting aid is standard for improved starting
in extremely cold temperatures.
Sound
Operator Sound
The operator sound level measured according to the procedures
specified in ISO 6396 is typically 74 dB(A), for cab offered by
Caterpillar with doors and windows closed.
Exterior Sound
Labeled spectator sound power level measured according
to the test procedures and conditions specified in 2000/14/EC
is 105 dB(A) for the standard European Union configuration
and 103 dB(A) for the optional sound suppression attachment.
40°
40°
63.5 mm
57 L/min
• Fully hydraulic power steering features center-point frame
articulation, front/rear wheel track and dedicated fixed
displacement steering pump to provide flow at all engine
and ground speeds.
• Adjustable steering column for operator comfort.
• High impact rubber steering stops.
• Optional secondary steering system available.
Loader Hydraulic System
914G
IT14G
Output at 2300 engine rpm and
6900 kPa with SAE 10W oil at 65° 90 L/min
90 L/min
Hydraulic Cycle Time
10.9 sec
12.5 sec
Implement pump
Pump Flow
90 L/min
90 L/min
Relief Pressure
245 bar
245 bar
Hydraulic Cycle Time
10.9 sec
12.5 sec
Raise
5.6 sec
6.9 sec
Dump
2.1 sec
2.5 sec
Seconds Lower,
empty, float down
3.2 sec
3.1 sec
Total
10.9 sec
12.5 sec
Relief Valve Setting
245 bar
245 bar
Lift Cylinders,
double acting
89 x 672 mm 85 x 795 mm
Tilt Cylinder,
double acting
102 x 400 mm 76 x 805 mm
• Open centered system with low effort pilot operated
hydraulic controls.
• Fixed displacement implement, gear-type pump is directly
connected to engine output.
• Features pilot safety valve to disable implement functions
and standard hydraulic oil cooler that tilts out for easy
cleaning of heat exchangers and full flow filtering.
• Optional Ride Control system for smooth operation in rough
roading conditions.
914G/IT14G specifications
13
Transmission
Final Drives
914G
IT14G
km/h
km/h
9
35
9
35
9
32
9
32
Standard Transmission
Maximum Travel Speeds
Forward 1 (turtle)
Forward 2 (rabbit)
Reverse 1 (turtle)
Reverse 2 (rabbit)
• Maximum travel speeds with 17.5-25 tires.
• Closed-loop hydrostatic system delivers high performance.
• Single-path, variable displacement pump (axial piston type)
and two variable displacement motors (bent axis type)
driving fixed ratio gear box on rear axle.
• Single lever control for precise, easy control for full power
directional changes.
• Full power directional changes.
• HIGH/LOW speed switch for roading or working transmission modes. Full rimpull is available in either mode.
• Inching function allows momentary travel speeds
as low as zero with full engine rpm.
• Optional creeper control allows variable function of travel
speeds with full engine rpm.
• Optional remote transmission control adds a forward/
neutral/reverse switch on the implement lever and
directional indicators on the instrument cluster.
Brakes
Axles
Axle Oscillation
11°
•
•
•
•
•
Fixed front, oscillating rear (±11 degrees).
Caterpillar axle with fully-enclosed brakes and final drives.
Patented Duo-Cone Seals between axle and housing.
Rear wheel can raise or lower a total of 350 mm.
Optional Limited Slip Differentials on front, rear or both
axles. Conventional differentials are standard.
• Rear axle trunnion has remote lubrication fitting.
Service Refill Capacities
• Service brake features completely closed and sealed
standard inboard oil-immersed disc brakes on front and
rear axles that are adjustment free.
• Dual pedal low-effort hydraulic braking system.
• Hydrostatic drive is variably neutralized during braking.
• Hydrostatic system provides additional hydraulic braking
• Parking brake is mechanical, shoe-type mounted on drive
line for positive manual operation. The transmission
on 914G is automatically neutralized when parking brake
is applied.
• Meets ISO 3450 requirements.
14
• Planetary final drives consist of ring gears pressed and
doweled into axle housing and planetary carrier assemblies
including planet gears with full-floating bronze sleeve
bearings.
• High contact ratio gearset reduces noise levels during
meshing.
• Planetary reduction gears are inboard mounted for optimal
protection and durability.
914G/IT14G specifications
Liter
Fuel tank
Cooling system
Crankcase
Differentials and final drives
Front
Rear
Hydraulic system (including tank)
Hydraulic tank
• Transfer Gearbox
Standard speed version – 2.5 Liter
High speed version – 4.0 Liter
150
23
7
15
15
100
70
Dimensions
Operating Specifications
Overall Height
Wheelbase
Width Over Tires
Bucket Width
Overall Length
Dump Clearance at
Maximum Lift and 45° Dump
Bucket Clearance at
Maximum Lift and Carry
Overall Height –
Bucket Raised
914G
IT14G
mm
mm
3100
2600
2260
2401
6229
3100
2600
2260
2401
6424
2659
2921
973
787
4390
4802
Tires
Size
Tread Width
Choice of
Maximum Operating Weight*
Breakout Force
Static Tipping Load/Full Turn
Reach Full Lift/45° Dump Angle
Dump Clearance Full Lift
45° Dump Angle
Articulation Angle
Bucket Capacity With Bolt-on
Cutting Edge
914G
7950 kg
62 kN
5323 kg
973 mm
IT14G
8450 kg
77 kN
4792 kg
787 mm
2659 mm
40°
2921 mm
40°
1.3 m3
1.3 m3
* 914G with 1.4 m3 bucket with bolt-on cutting edge and
optional 150 kg counterweight.
IT14G with 1.4 m3 bucket with bolt-on cutting edge and
standard 150 kg counterweight.
ROPS/FOPS
17.5-25
1800 mm
Tubeless, nylon loader-design tires
ROPS meets ISO3471:1994 and
FOPS meets ISO3449:1992 Level II
Typical material densities-loose
kg/m3
Basalt
Bauxite, Kaolin
Clay
natural bed
dry
wet
Clay and gravel
dry
wet
Decomposed rock
75% rock, 25% earth
50% rock, 50% earth
25% rock, 75% earth
1960
1420
1660
1480
1660
1420
1540
1960
1720
1570
kg/m3
Earth
dry, packed
wet, excavated
Granite
broken
Gravel
pitrun
dry
dry, 6-50 mm
wet, 6-50 mm
Gypsum
broken
crushed
Limestone
broken
crushed
1510
1600
1660
1930
1510
1690
2020
1810
1600
1540
1540
kg/m3
Sand
dry, loose
damp
wet
Sand and clay
loose
Sand and gravel
dry
wet
Sandstone
Shale
Slag
broken
Stone
crushed
914G/IT14G specifications
1420
1690
1840
1600
1720
2020
1510
1250
1750
1600
15
914G – Operating Specifications
Penetration Buckets
General Purpose Buckets
With Bolt-On Cutting
Edge
With Bolt-On Teeth,
Segments
With Flush Mounted
Teeth
With Bolt-On
Teeth
Rated bucket capacity
m3
1.3
1.4
1.3
1.4
1.2
1.3
1.3
1.4
Struck capacity
m3
1.1
1.2
1.1
1.2
1.0
1.1
1.1
1.2
Width
mm
2401
2401
2424
2424
2424
2424
2434
2434
Dump clearance at full lift
and 45° discharge
mm
2659
2623
2667
2632
2715
2680
2680
2680
Reach at full lift
and 45° discharge
mm
973
1008
964
1000
944
979
979
979
Reach at 45° discharge
and 2130 mm clearance
mm
1331
1348
1282
1297
1259
1275
1287
1249
Reach with lift arms horizontal
and bucket level
mm
1980
2030
1970
2020
1920
1970
1970
1970
Digging depth
mm
89
89
89
89
70
70
70
70
Overall length
mm
6229
6279
6328
6378
6310
6360
6358
6438
Overall height with bucket
at full raise
mm
4390
4442
4390
4442
4390
4442
4442
4442
Loader clearance circle
with bucket in carry position
m
10.34
10.37
10.42
10.45
10.42
10.45
10.44
10.49
Static tipping load straight*
kg
6098
6069
6059
6029
6169
6166
6183
6011
Static tipping load full 40° turn*
kg
5323
5295
5284
5256
5415
5387
5404
5232
Breakout force
kN
64
60
64
60
69
65
65
64
Operating weight*
kg
7378
7391
7409
7422
7336
7349
7336
7500
* Static tipping and operating weights
shown are for high-speed version 914G
and include lubricants, full fuel tank,
ROPS cab, 80 kg operator and 17.5 - R25
(L2 equivalent) tires.
914G – Bucket Size Selector
Bucket Capacity
1.2 m3
115%
100%
95%
1.3 m3
% = Bucket Fill Factor
1.4 m3
1600
1800
2000
2200
Material Density
16
914G specifications
2400
2600 kg/m 3
IT14G – Operating Specifications
Penetration
Buckets
General Purpose Buckets
With Bolt-On Cutting
Edge
With Bolt-On
Teeth
With Flush
Mounted Teeth
With Bolt-On Teeth,
Segments
Rated bucket capacity
m3
1.3
1.4
1.2
1.3
1.3
1.4
1.3
Struck capacity
m3
1.1
1.2
1.0
1.1
1.1
1.2
1.1
Width
mm
2401
2401
2424
2424
2424
2424
2434
Dump clearance at full lift
and 45° discharge
mm
2921
2886
2977
2942
2930
2895
2942
Reach at full lift
and 45° discharge
mm
787
823
757
792
779
814
792
Reach at 45° discharge
and 2130 mm clearance
mm
1426
1443
1351
1368
1375
1390
1380
Reach with lift arms horizontal
and bucket level
mm
2151
2201
2090
2140
2139
2189
2140
Digging depth
mm
174
174
155
155
174
174
155
Overall length
mm
6424
6474
6506
6556
6524
6574
6554
Overall height with bucket
at full raise
mm
4802
4855
4802
4855
4802
4855
4855
Loader clearance circle
with bucket in carry position
m
10.40
10.42
10.47
10.50
10.47
10.50
10.49
Static tipping load straight*
kg
5541
5495
5637
5589
5503
5456
5605
Static tipping load full 40° turn*
kg
4792
4750
4882
4840
4754
4712
4855
Breakout force
kN
79
74
85
80
79
75
80
Operating weight*
kg
8032
8044
7990
8003
8063
8076
7990
* Static tipping and operating weights
shown are for high-speed version IT14G
and include lubricants, full fuel tank,
ROPS cab, 80 kg operator, standard
250 kg counterweight and 17.5 - R25
(L2 equivalent) tires.
IT14G – Bucket Size Selector
Bucket Capacity
1.2 m3
115%
100%
95%
1.3 m3
% = Bucket Fill Factor
1.4 m3
1400
1600
1800
2000
2200
2400 kg/m 3
Material Density
IT14G specifications
17
914G – Dimensions with Bucket
All dimensions are approximate.
◆
Dimensions vary with bucket.
Refer to Operating Specifications chart on pg.16.
60o
◆
48o
3435 mm
◆
3100 mm
3236 mm
914G
2255 mm
46o
2080 mm
◆
41o
620 mm
30o
374 mm
◆
1300 mm
1658 mm
2600 mm
◆
Tread width
Width over tires
Ground clearance
Change in vertical
dimensions
mm
mm
mm
mm
1800
1800
2223
2258
414
456
-42
–
15.5 - 25, 12 PR (L-2)
17.5 - R25 (L-2 equivalent)
914G – Supplemental Specifications
Change in Operating Weight
kg
Air conditioner
Canopy, ROPS (less cab)
Counterweight, 150 kg
Ride control
Secondary steering
Tires & rims, 15.5 - 25, 12 PR (L-2)
Tires & rims, 15.5 - 25, 12 PR (L-3)
Tires & rims, 15.5 - R25, radial (L-2 equivalent)
Tires & rims, 15.5 - R25, radial (L-3 equivalent)
Tires & rims, 17.5 - 25, 12 PR (L-2)
Tires & rims, 17.5 - 25, 12 PR (L-3)
Tires & rims, 17.5 - R25, radial (L-3 equivalent)
Tires & rims, 17.5 - R25, radial (L-2/L-3 equivalent)
18
914G specifications
+55
-199
+152
+32
+30
-159
-78
-84
-36
-126
+12
+156
+95
Change in Articulated Static
Tipping Load
kg
+71
-174
+287
+6
+44
-99
-48
-52
-23
-78
+7
+96
+58
IT14G – Dimensions with Bucket
All dimensions are approximate.
◆
Dimensions vary with bucket.
Refer to Operating Specifications chart on pg.17.
57o
◆
48o
3798 mm
◆
3100 mm
3565 mm
IT14G
2255 mm
54o
49o
2080 mm
620 mm
30o
1300 mm
1658 mm
◆
374 mm
◆
2600 mm
◆
15.5 - 25, 8 PR (L-2)
17.5 - R25 (L-2 equivalent)
Tread width
Width over tires
Ground clearance
Change in vertical
dimensions
mm
mm
mm
mm
1800
1800
2222
2298
414
456
-42
–
IT14G – Supplemental Specifications
Air conditioner
Canopy, ROPS (less cab)
Ride control
Powertrain guard
Secondary steering
Tires & rims, 15.5 - 25, 12PR (L-2)
Tires & rims, 15.5 - 25, 12PR (L-3)
Tires & rims, 15.5 - 25, R25 (L-2 equivalent)
Tires & rims, 15.5 - 25, R25 (L-3 equivalent)
Tires & rims, 17.5 - 25, 12 PR (L-2)
Tires & rims, 17.5 - 25, 12 PR (L-3)
Tires & rims, 17.5 - 25, R25 (L-3 equivalent)
Tires & rims, 17.5 - 25, R25 (L-2/L-3 equivalent)
Change in Operating Weight
kg
Change in Articulated Static
Tipping Load
kg
+55
-122
+28
+17
+30
-140
-76
-84
-4
-40
+32
+100
+76
+62
-89
+5
+15
+38
-84
-46
-44
-2
-21
+17
+54
+41
Static tipping load changes are for an IT14G with lubricants, full fuel tank, ROPS cab, 80 kg operator,
standard 250 kg counterweight, 17.5 R25 L-2 equivalent tires and a 1.3 m3 general purpose bucket with bolt-on cutting edge.
IT14G specifications
19
IT14G – Dimensions with Forks
All dimensions are approximate.
◆ Refer to operating specifications chart below.
586 mm
1490 mm
3708 mm
IT14G
745 mm
1808 mm
34 mm
◆
IT14G – Operating Specifications with Forks
Fork Tine Length
Operating load
Per SAE J1197 FEB91 (50% of full turn static tipping load)
Per CEN 474-3, rough terrain (60% of full turn static tipping load)
Per CEN 474-3, firm and level ground (80% of full turn static tipping load)
Overall length
Load center
Static tipping load with level arms and forks, 600 mm load center, straight*
Static tipping load with level arms and forks, 600 mm load center, full 40° turn*
Operating weight*
* Static tipping and operating weights shown are for an IT14G with lubricants, full fuel tank,
ROPS cab, 80 kg operator, standard 250 kg counterweight and 17.5 R25 (L2 equivalent) tires.
20
IT14G specifications
1050 mm
1200 mm
1350 mm
1927 kg
2312 kg
3082 kg
6723 mm
525 mm
4447 kg
3853 kg
7898 kg
1870 kg
2244 kg
2992 kg
6873 mm
600 mm
4309 kg
3734 kg
7915 kg
1810 kg
2172 kg
2896 kg
7023 mm
675 mm
4179 kg
3620 kg
7928 kg
IT14G – Dimensions with Material Handling Arm
All dimensions are approximate.
2522 mm
1962 mm
1402 mm
6840 mm
6012 mm
5185 mm
IT14G
3179 mm
1585 mm
4178 mm
5178 mm
1874 mm
2670 mm
1514 mm
3468 mm
2116 mm
2719 mm
IT14G – Operating Specifications with Material Handling Arm
Material Handling Arm Position
Operating load at 40° full turn
Static tipping load, straight*
Static tipping load, full 40° full turn*
Operating weight*
Retracted
Mid-Position
Extended
1370 kg
3158 kg
2740 kg
7770 kg
1076 kg
2484 kg
2153 kg
7770 kg
888 kg
2051 kg
1777 kg
7770 kg
* Static tipping and operating weights shown include lubricants, full fuel tank, ROPS cab,
80 kg operator, standard 250 kg counterweight and 17.5 - R25 (L2 equivalent) tires.
Machine stability and operating weights are affected by tire size, tire ballast and other attachments.
IT14G specifications
21
Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for specifics.
24V direct electric starting
Air cleaner, radial seal
Alarm, back-up
Alternator, 80-ampere
Antifreeze (protected to –36° C)
Extended life coolant antifreeze
Batteries, two 900 CCA maintenance free
Battery disconnect switch
Brakes
Enclosed/sealed
Parking – mechanical on drive line, secondary
Service – inboard, oil-immersed, enclosed,
wet-disc full hydraulic
Bucket control, single lever, pilot
Bucket/fork positioner, automatic
Cab, ROPS (sound suppressed and pressurized)
Adjustable steering column
Cigar lighter
Cup holder
Ground level door release
Heater/defroster
Rearview mirrors, inside (2)
Storage space, lockable
Seat, adjustable fabric suspension
Seat belt, 75 mm, retractable
Tinted front safety glass
Two doors, fixed glass
Wiper and washer (front and rear), front intermittent
Counterweight (150 kg); standard on IT14G only
Defroster, rear window, wired glass
Differentials, conventional (front and rear)
Driveshaft; lubed for life
Electric fuel pump
Engine: Caterpillar 3054C DIT diesel
Low emission
Turbocharged
Engine enclosure, lockable
Fenders (front/rear)
Glow plug starting aid
Hitch, drawbar
Horn, front, warning (electrical)
Hydraulic control, pilot-operated, single lever, 2 valve
Third function hydraulics, standard on IT14G only
Pilot control detents
Float
Rackback
Raise
Hydraulic oil cooler, tiltable
Hydraulic diagnostic connectors
22
914G/IT14G specifications
Ignition key start/stop switch
Indicators
Air cleaner
Air filter
Brake charge pressure
Engine oil pressure
Electrical system voltage
Hystat oil filter bypass
Parking brake
Primary steering
Instrumentation
Battery voltage gauge
Engine coolant temperature gauge
Fuel level gauge
Hour meter, digital
Hydraulic oil level sight gauge
Hydraulic oil temperature gauge
Lift kickout, automatic
Lift/tilt kickout neutralizer
Lighting system
Brake lights
Interior light
Turn signals (front and rear)
Working lights, halogen (front and rear)
Linkage
Sealed Z-bar design loader linkage (914G only)
8 bar parallel lift linkage with sealed pins (IT14G only)
Muffler
Pilot hydraulic implement controls
Power receptacles; internal and external
Pressure test points
Radiator, serviceable unit core
Radiator expansion bottle
Single lever transmission control
S•O•S ports
Engine oil
Hydraulic oil
Hydraulic oil cooler
Steering, hydraulic
Suction fan
Transmission, hydrostatic
Vandalism protection-locked service points
Optional Equipment
Optional Equipment may vary. Consult your Caterpillar dealer for specifics.
Air Conditioner, R-134a refrigerant
Bottom guard, hystat
Canopy, ROPS
Counterweight, 150 kg (optional 914G only)
Creeper Control, transmission
Differential, Limited Slip (front and/or rear axle)
Drain valves, ecological
Engine Speed Control (ESC)
Electrical accessories package
(12V converter, accessory plug outlet, wiring)
Fenders, roading
Forward/Neutral/Reverse (FNR) remote transmission control
Guard, windshield (optional 914G only)
Ground engaging tools, bucket
Hydraulic third and fourth valves
(Hydraulic third valve standard on IT14G)
- quick disconnects
- hydraulic lines and control
Lighting
Auxiliary front: 2 cab-mounted halogen, working
Machine Security System
Includes 2 preprogrammed keys, additional keys are
available through parts distribution (206-5162)
Requires Caterpillar Service Tool, Electronic Technician
(ET) to activate and modify programming of keys
Mirrors
External (2)
Quick Coupler (standard on IT14G)
Radio prep package (12V)
- includes speakers, antenna, converter and mounts
(Radio not included)
Remote Forward/Neutral/Reverse transmission control
Ride Control system
Rotating beacon, magnetic
Seats:
- heated, fabric, with parking brake alarm
- Caterpillar Comfort Series, fabric, air suspension
Sliding door window
Speedometer
Starting aid
Engine block heater (120V or 240V)
Steering, secondary
Sun screen, rear window
Sun visor
Tires:
- bias ply, 15.5 x 25 and 17.5 x 25
- radial, 15.5 x R25 and 17.5 x R25
Tire rims, 1- and 3-piece
Tool box, lockable
Tool kit
914G/IT14G specifications
23
914G Wheel Loader
IT14G Integrated Toolcarrier
HEHL3082 (08/2004) hr
Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.
www.CAT.com
© 2004 Caterpillar Inc.
All Rights Reserved
®
Download PDF