Data Sheet FUJITSU Mainboard D3446-S ATX
Data Sheet
FUJITSU Mainboard D3446-S ATX
Industrial Series
Powered by the Intel® C236 Express Chipset supporting DDR4 2133 SDRAM Memory
and 6th generation Intel® CoreTM i3 / i5 / i7 and Xeon® E3-1200 V5 Processors
(Socket LGA1151)
Designed for 24/7 continuous operation and enhanced operating temperature range
Chipset:
Intel® C236 Express Chipset
Processors:
Intel® Xeon® E3-1200 V5 processor series
Intel® Core™ i7 / i5 / i3 – (6th gen.) processor series
Intel® Pentium® / Intel® Celeron® processors
Socket LGA1151 – up to 80W TDP
Memory:
DDR4 2133 SDRAM (UDIMM)
ECC / Non-ECC
Product Features:
Intel® iAMT 11.0
Onboard support for Mini-PCI Express and mSATA
Onboard SATA-III incl. RAIS support
Intel® HD Graphics; PCI Express Gen3
Multichannel Audio & Dual Intel GbE LAN onboard
USB 2.0/3.0 and USB 2.0 socket (stick) onboard
Trusted Platform Module V2.0 (Infineon) onboard
BIOS-POST/-Boot & OS – HW Watchdog onboard
(planned)
Page 1 of 3
www.asem.it
Data Sheet FUJITSU Mainboard D3446-S ATX
Features and benefits
Board Size ATX: 9.6“ x 12“ (243.8 x 304.8 mm)
Chipset
Intel® C236 Express Chipset
Memory
4 DIMM Sockets DDR4, max. 64GB, Dual Channel, 2133MHz (CL15), UDIMM,
1.2V/2.5V, 288-pin, ECC (appropriate processor required) / non-ECC.
Effective memory speed depends on installed processor
Processor
Intel® Xeon® E3-1200 V5 processor series
Intel® Core™ i7 / i5 / i3 – (6th generation) processor series
Intel® Pentium® / Intel® Celeron® processor series
Socket LGA1151, max. 80W TDP
Power Specification
ATX- 24 Pin or ATX- 20 Pin + 4 Pin (12V) Power Connector required
Support for Soft-Off Power Supplies
12V and 3.3V Supply Voltage on PCIe Slots
3.3V Auxiliary Supply Voltage on PCIe Slots (Wake-Up Function)
On board CPU Voltage Regulator, 5V / 2A Auxiliary Power
required for USB Wake-Up from Save-to-RAM, Save-to-Disk
Power Supply Requirements
for onboard components (worst case incl. processor & memory; w/o USB devices;
w/o PCIe cards; w/o SATA drives; w/o mSATA / mPCIe;)
Mainboard
Source
Voltage Min. PS Max.Voltage
Max. Mainboard
Capacitive
Load
Tolerance
Current
Load
+ 12V
0.05A
±5%
5.000µF
10A/15A 1)
Main Power
- 12V
0A
± 10 %
470µF
0.3A
Supply
+ 5V
0.2A
±5%
3.000µF
6.0A
Aux. Power
+ 3.3V
+ 5Vaux
0A
0A
±5%
+5 % / -3%
3.000µF
3.000µF
0.5A
2.5A
1) Max. Cont. Current = 10A; max. Surge Current = 12A (<100sec) / 15A (<10ms)
BIOS
AMI Aptio 5.x (UEFI) BIOS
modified and adapted by Fujitsu Technology Solutions; Recovery BIOS, SM-BIOS
(DMI), BIOS and CPU Microcode Update, Quick Boot, Logo Boot, Quiet Boot, Plug
& Play, Automatic DRAM and PCIe Configuration, BIOS Support for S.M.A.R.T.,
Advanced Power Management, ACPI S3/S4, Wake on time from S5.
Boot support for M.2 Carrier Board D3352-A1 (PCIe-based SSD modules, AHCI).
BIOS integrated HW Diagnostic Tool
Security Features
Recovery BIOS, System and BIOS Password, Boot Sequence Control, Serial-/
Parallel-/ USB- Port Access, Boot Sector Virus Warning, Write Protection for Flash
BIOS, EraseDisk (BIOS Feature); TPM V2.0 (Infineon SLB 9665; TCG compliant).
Special Features
Silent Fan
System Guard
Silent Drives
Recovery BIOS
Desk Update
Multi Boot
HDD Password
CSA / UL / FCC certified
Independent temperature related processor fan and
system fan supervision and control
View and adjust Silent Fan features
Noise reduction for optical and hard disk drives
Restores a corrupted BIOS
Simple driver update with Driver&Utilities DVD
Comfortable boot from any boot device
Access protection for disk drives
cCSAus 60950-1/ FCC-B (planned)
Supported / Released Operating Systems
OS
MS Windows XP
MS Windows 7-32
MS Windows 7-64
MS Windows 8.1-64
MS Windows 10-64
MS Server 2008 R2
MS Server 2012 R2
MS Server 2016
Linux-32
Linux-64
Page 2 of 3
“Runnable”
-X
X
X
X
X
X
planned
X
X
“Tested/Released by Fujitsu”
-X
X
X
X
basic capability approved
basic capability approved
planned
Designed for Industrial Applications
Longlife components
Designed for 24/7 use in industrial applications
Tin-plated PCB
Improved durability of PCB surface
Revision control
Strict control and pre-announcement
Extended lifecycle
Mainboard available for more than four years
Industrial grade EMI immunity
Enhanced operating temperature range (0°C-60°C) 1)
Graphics
Intel® HD Graphics (depends on installed processor), DX12
Audio
Realtek ALC671, 5.1-channel, High Definition Audio Codec
LAN
Intel i219LM & i210AT with 10/100/1000 MBit/s, iAMT 11 Support,
Wake-on-LAN (WoL) by interesting Packets, Link Status Change and
Magic Packet™, PXE Support, BIOS MAC Address Display, Teaming Support
Drives
6 x SATA SATA-III; NCQ, AHCI, RAID 0/1/5/10
1 x mSATA (half-/fullsize); SATA-III (shared with one SATA port), incl. USB2.0
Features
Chipset / Board Size
VGA 2) / DVI-I / DVI-D / DP V1.2 / 2nd DP V1.2 / LVDS
Buzzer / int. Speaker Support / 5.1 Multichannel Audio
Dual LAN Gbit / 100 Mbit / 10 Mbit / WoL / LAN Boot
iAMT 11.0 / Intel Standard Manageability / DASH V1.1
SATA / ATA / RAID / eSATA-Support / mSATA / M.2 SSD 3)
FireWire™ / USB 2.0 / USB 3.0
FAN monitored & controlled PSU 4) / CPU / AUX1 / AUX2 / AUX3
TEMP monitored CPU / onboard sensors / external sensor
Special Features
Silent Fan / Silent Fan LT / System Guard / Silent Drives
Recovery BIOS / Desk Update / Multi Boot
HDD Password / HDD Encryption / EraseDisk / TPM
BIOS POST Watchdog / BIOS Boot Watchdog / OS HW Watchdog
Logo Boot Option / Intel On Screen Branding
High Efficiency Core Voltage Regulator Design
Operating Mode 24-7 / 8-5 (hrs per day - days per week)
Mainboard operating temperature range (chassis inside)
Internal Connectors
DIMM Sockets (DDR4-2133)
PCI Express x16 (16 Lanes, Gen3) / x16 (4 Lanes, Gen3)
PCI Express x8 (1 Lane Gen3)
PCI Express x4 (4 Lanes, Gen3) / x4 (1 Lane Gen3)
PCI Slots (32Bit, 33 MHz, Rev. 2.3) / Mini-PCI Express 5)
SATA-600 / SATA-300 / mSATA 5) / M.2 SSD 3)
S/PDIF (digital Audio) OUT / IN
Frontpanel Audio (9-Pin, HD Audio & Legacy Audio AC97)
USB 2.0 channels / USB 3.0 channels / USB Stick (2.0)
Serial (COM2, RS232)
FAN PSU 4) / CPU / AUX1 / AUX2 7) / AUX3
Intrusion (Case Open) / GPIO' (8Bit) / SMBus (Case Temp.)
Parallel Port Pin Connector 6)
ATX Power Supply (24 pin + 4 pin) / 12V-only Power Supply
External Connectors
VGA Sub D 2) / DVI-I / DVI-D / DisplayPort V1.2
Audio Mic. In / Line in / Line out (or driver configuration)
LAN (RJ-45)
PS/2 Mouse / Keyboard
USB 2.0 / USB 3.0
Serial (COM1, RS232)
Parallel (EPP/ECP) 6)
1)
2)
3)
4)
5)
6)
7)
D3446-S
iC236 / ATX
-/-//////
////
//
/-////-//
////
///-//
//
/-//
//
/

/0°C – 60°C
4
1/1
1
1/1
2/1
6/-/1/1/1
2/2/1
1
1/1/1/1/1
1/1/1
/-/-/1/2
1/1/1
2
1/1
4/4
1
-
Forced cooling required, see technical documentation for detailed requirements
VGA possible via optional converter board D3453 or DP-VGA-converter (dongle)
M.2 support possible via D3352 M.2 Carrier Board (for PCIe/AHCI-based SSD module)
Not supported by standard Power Supplies
mSATA / Mini-PCI Express = shared socket (halfsize / fullsize support)
External parallel port possible via optional connector cable
Note: Intel limitation  ECP-DMA-Mode no longer supported
One fan useable in PWM- or 3-pin mode (BIOS Option)
www.asem.it
Data Sheet FUJITSU Mainboard D3446-S ATX
External Connectors
Mouse
Kbd
4x USB2.0
COM1
2x DisplayPort V1.2
DVI-D
LAN2
LAN1 (iAMT)
4x USB 3.0
Audio
Connector / Socket Diagram
Contact
ASEM S.p.A. Industrial Automation
Tel:
+39 0432 9671
Fax:
+39 0432 967226
Email: IndustrialAutomation@asem.it
Website: http://www.asem.it
Page 3 of 3
Disclaimer
The information provided in the documentation are subject to change without notice and does not represent
any obligation on the part of ASEM SpA. ASEM S.p.A. is not responsible for technical errors or other omissions
and assumes no liability resulting from its use. ASEM S.p.A. not be liable for lost profits or damages, direct or
indirect, of any kind (including loss or corruption of data) arising out of the information contained in the
documentation.
www.asem.it
Download PDF