For the latest prices, please check AutomationDirect.com.
Enclosure Accessories - Panel Mounting
WAJCDFK
JIC and NEMA Swing-Out
Panel Kits
WANADFK
Swing-out panel kits are designed to allow
mounting of switches, pilot lights and other
components near the front of the enclosure for
easy access or meter reading.
Sealing washers are included to ensure that
the enclosure will meet the original NEMA
rating after installation.
These kits are designed for use with standard
Hubbell-Wiegmann JIC and NEMA panels.
They do not work with N412xxxC Ultimate
Series enclosures or HW-XXXX series non-metal
enclosures.
Panel Kits
Price
WAJCDFK
$36.50
WANADFK
$49.00
Description
Weight [lb]
Hubbell-Wiegmann enclosure swing-out
panel kit, plated steel, for use on NEMA
continuous hinge style enclosures.
Includes (2) hinge brackets, (2) fixed
brackets, and mounting hardware. Panel
sold separately.
Hubbell-Wiegmann enclosure swing-out
panel kit, plated steel, for use on NEMA
single and two-door style enclosures.
Includes (2) hinge brackets, (2) fixed
brackets, and mounting hardware. Panel
sold separately.
1
3
Note: Panels must be ordered separately from enclosure.
Enclosure Shipping Schedule
Panel Supports
Same day
Panel
supports
provide
additional support for panels
on which heavy instruments are
mounted.
They are adjustable so the
weight of the panel is partially
supported by the bottom of the
enclosure.
1 - 7 days
1 -10 days
Color indicates shipping lead time in business days.
Panel
Supports
Price
Description
Wt. [lb]
WAPS03
$34.00
Hubbell-Wiegmann enclosure panel support foot, white
polyester powder finish, for single and two-door enclosures
where distance between bottom of panel and enclosure is less
than 2.25 inches. Package of 2. Load limit: 250 lbs.
1
WAPS09
$49.00
Hubbell-Wiegmann enclosure panel support foot, white
polyester powder finish, for free-standing enclosures where
distance between bottom of panel and enclosure is less than
8.5 inches and greater than 2.88 inches. Package of 2. Load
limit: 250 lbs.
2
WAPS03
Center Panel Supports for Freestanding Enclosures
Center Panel Supports Price
WA60FSCPS
WA72FSCPS
WA90FSCPS
Description
Hubbell-Wiegmann enclosure center panel support, white
polyester powder finish, for 60 inch high enclosures. Allows two
$135.00
single-wide sub-panels (including swing-out panels and rack
mount frames) to be mounted in a double-door enclosure.
Hubbell-Wiegmann enclosure center panel support, white
polyester powder finish, for 72 inch high enclosures. Allows two
$150.00
single-wide sub-panels (including swing-out panels and rack
mount frames) to be mounted in a double-door enclosure.
Hubbell-Wiegmann enclosure center panel support, white
polyester powder finish, for 90 inch high enclosures. Allows two
$179.00
single-wide sub-panels (including swing-out panels and rack
mount frames) to be mounted in a double-door enclosure.
Weight [lb]
15
21
WA60FSCPS
22
See our website: www.AutomationDirect.com for complete engineering drawings.
Book 3 (14.1)
www.automationdirect.com/enclosures
Enclosures Accessories
eEN-276
For the latest prices, please check AutomationDirect.com.
Enclosure Accessories - Panel Mounting
Adjustable Depth Mounting Kit
Sets of Brackets,
Adjustable
Mounting Clips, Wt.
Depth
Price Enclosure
Depth
and Hardware [lb]
Mounting Kit
Included in Kit
Adjustable depth mounting kits allow
mounting of accessories at variable
depths from front to back. They fit
Wiegmann Ultimate Series NEMA 412
enclosures of all depths.
Kits may be used to mount the
following: swing-out panels, DIN rails,
rack angles, mounting channels and
grid straps.
Kits include either two or four sets
of brackets, mounting clips, and
hardware. One set required for each
enclosure collar stud.
HFWADM64C
HFWADM64C
$55.00
6 or more inches
4
HFWADM84C
$60.00
8 or more inches
4
HFWADM82C
$30.00
8 or more inches
2
HFWADM104C
$63.00 10 or more inches
4
HFWADM102C
$31.50 10 or more inches
2
HFWADM124C
$66.00 12 or more inches
4
HFWADM122C
$33.00 12 or more inches
2
2
1
2
Finish: White Polyester Powder
Note: Dead front kit CANNOT be mounted on
adjustable depth mounting kit.
Dead Front Kit
ead front kits allow fixed sub-mounting
D
surface for installation directly behind the door
of Ultimate Series NEMA 412 enclosures.
Dead Front
Kit
The clearance from the dead panel face to the
interior door face is 1-5/16-inch on solid doors,
and 1-1/16-inch on window doors.
Enclosure Size
Price For(HxW)
in [mm]
Wt.
[lb]
HFWDF1212C
$58.00
12 X 12 (304 x 304)
3
HFWDF1612C
$66.00
16 X 12 (406 x 304)
5
20 X 16 (508 x 406)
7
HFWDF2016C
$85.00
Each kit includes mounting brackets, grounding
hardware, and a carbon steel panel with white
polyester powder finish.
HFWDF2020C
$98.00
20 X 20 (508 x 508)
9
HFWDF2420C
$110.00
24 X 20 (609 x 508)
11
• Dead fronts meet NEMA 1 with enclosure
door open.
HFWDF2424C
$125.00
24 X 24 (609 x 609)
12
HFWDF3024C
$147.00
30 X 24 (762 x 609)
16
Note: Dead front kit CANNOT be mounted on adjustable mounting kit.
HFWDF1212C
Panel Conversion Kit
Panel
Wt.
Conversion Kit Price For Enclosure Size [lb]
Panel conversion kits allow
installation of standard NP series
subpanels within Ultimate Series
NEMA 12 enclosures. Conversion
brackets bolt over the top of existing
studs, then install the subpanel. Kit
includes four adapter plates and
hardware for mounting subpanels.
HFWCNP4C
HFWCNP4C
Hubbell-Wiegmann enclosure
panel conversion kit, white
polyester powder finish. Allows
standard NP series sub panels
$43.00 to mount in N412 series
enclosures up to 30 x 30 inch
(HxW) nominal size. Includes
(4) brackets and mounting
hardware.
2
Enclosure Shipping Schedule
1 -10 days
Color indicates shipping lead time in business days.
Book 3 (14.1)
eEN-277
Enclosures Accessories
1-800-633-0405
Download PDF