Documentation programming adapter PLVC/EV1D

Documentation
programming adapter
PLVC/EV1D
Programming adapter
PLVC/EV1D
Contents:
1. Technical information ........................................................................................... 3
2. Installation ............................................................................................................ 4
3
Use of the programming adapter ......................................................................... 6
4
Overview programming adapter ........................................................................... 7
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
-2HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Programming adapter
PLVC/EV1D
1. Technical information
Product:
Programmieradapter PLVC/EV1D
Material number:
6217 2075-00
Order number:
6962 5690-00
Size:
67x43x20 (l*w*d)
USB:
USB1.1, USB2.0
Supported systems:
Windows7, Windows7 x64, Windows Vista,
Windows Vista x64, Windows XP, Windows XP x64
Windows 2000, Windows Server 2008, Windows
Server 2003, Windows Server 2003 x64 S
Voltage supply:
Internal via USB-Bus 5V
Bus system:
USB to RS232
Baud rate:
Default 19200 bits/sec,
Min. 9.600 bits/sec
Max. 57600 bits/sec
Galvanic isolation:
In and output signal not completely isolated to each other
Chipset:
FTDI - FT232BL
Ambient temperatures:
0-50°C
Scope of supply:
1 programming adapter (USB cable 0.4m, EV1D cable
0.4m), documentation, driver
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
-3HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Programming adapter
PLVC/EV1D
2. Installation
Note: Do not connect the USB programming adapter with your computer
while installing the driver
2.1. Extract the .zip file and install the driver CDM20802.exe
Following window will open:
The window will close after installing the driver successfully
2.2. Connect the programming adapter with a USB port on your computer. It
should be detected automatically
2.3. Open your Windows Device manager
Under “Ports (COM und LPT)“, the programming adapter will be shown
“Prolific USB-to-Serial Comm Port (COM H)“
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
-4HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Programming adapter
PLVC/EV1D
2.2 Change the settings like shown in the following picture
• Bits per second (Baud rate): 19200b/sec
• Data bits: 8,
• Parity: non,
• Stop bits: 1,
• Flow regulation: non,
• Com-Port: only COM 1HCOM 4 are possible
The programming adapter is now installed and completely parameterized
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
-5HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Programming adapter
PLVC/EV1D
3 Use of the programming adapter
3.1 PLVC
Connect the 9 pin D-Sub plug with the PLVC.
Note: Do not connect the colour 6 pin flat ribbon cable with an EV1D while the
programming adapter is connected to a PLVC!
Establish a connection via HAWE Terminal Tool or HAWE Visual Tool.
Please be careful to set the correct communication settings (COM-Port, Baud
rate H)
Pinning:
PLVC X1.1 (RxD)
PLVC X1.2 (TxD)
PLVC X1.3 (GND)
Programming adapter 9 pin D-Sub pin 3 (TxD)
Programming adapter 9 pin D-Sub pin 2 (RxD)
Programming adapter 9 pin D-Sub pin 5 (GND)
3.2 EV1D
Connect the colour 6 pin flat ribbon cable with X3 on the EV1D.
Please take care to set the plug correctly. The “nose” has to show to the digital
display.
Start the HAWE program “EV1D-Digit.exe” and set the communication
parameter.
Now you have the ability to set EV1D parameter.
Pinning:
EV1D X3.1 (TxD)
EV1D X3.2 n.c.
EV1D X3.3 (RxD)
EV1D X3.4 (DTR)
EV1D X3.5 (GND)
EV1D X3.6 (RTS)
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
Programming adapter 6 pin plug pin 1 (RxD)
Programming adapter 6 pin plug pin 2 n.c.
Programming adapter 6 pin plug pin 3 (TxD)
Programming adapter 6 pin plug pin 4 (DTR)
Programming adapter 6 pin plug pin 5 (GND)
Programming adapter 6 pin plug pin 6 (RTS)
-6HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Programming adapter
PLVC/EV1D
Nose
Pin 1
4 Details programming adapter
Receive data
Send data
Power on
EV1D
connector
PC connection
via USB
Marcus Hofmann
m.hofmann@hawe.de
+49 (0)89/ 37 91 00 – 2136
PLVC connector
via 9 pin D-Sub
-7HAWE Hydraulik SE – Streitfeldstraße 25 – 81673 München
© HAWE SE 2010
18.10.2012
Version 1.2
Download PDF