i.MX6UL SODIMM Module

System On Module iW-RainboW-G18M-SM
i.MX6UL SODIMM Module
iWave's i.MX6UL based SODIMM CPU module integrates power efficient high
performance ARM Cortex A7 CPU core operating up to 528MHz speed. The
SOM is ultra-compact in size and integrated with on-board PMIC, Flash,
DDR3 and dual Ethernet PHY. The SOM is ideally suitable for the cost & power
optimized general embedded and industrial applications.
APPLICATIONS: Industrial HMI, Access Control, Mobile POS, Secure
e-commerce, Energy Management, IOT gateway, Industrial control &
automation, Medical & Healthcare equipment, White goods and Smart
appliances
iW-RainboW-G18M-SM
HIGHLIGHTS
Power efficient Cortex-A7 @ 528MHz
Compatible with Cortex A9 i.MX6Q/D/S
SODIMM SOM
Ultra Compact form factor 67.6mm X
29mm
Advanced hardware enabled security
PMIC with DVFS support
Industrial temperature support available
Technical and quick customization
support
10+ years, long term support
CPU:
Freescale’s i.MX6UL1/2/3 @ 528MHz
ARM Cortex A7
PMIC:
Freescale PF3001
RAM:
256MB DDR3 (Expandable)
256MB NAND Flash (Expandable)
Micro SD Slot (Optional)
eMMC Flash (Optional)
QSPI Flash (Optional)
Power Input:
3.3V @ 1A through SODIMM Edge
Operating Temperature:
0°C to +70°C Commercial
-40°C to +85°C Industrial
Form Factor:
67.6mm x 29mm
1
1
SODIMM Edge Interfaces:
Debug UART
Data UART - 3 Ports
CAN - 2 Ports
SD(4-Bit) - 1 Port
2
10/100 Ethernet - Up to 2 Ports
USB OTG - 2 Ports
24bpp RGB display port
8Bit Parallel Camera Port
I2S Audio or JTAG
I2C x 1 Port
PWM - 2 Ports
GPIOs
Boot mode signals
Operating System:
Linux 3.14.38
Note1: At a time either NAND Flash or eMMC & QSPI flash or µSD & QSPI flash can be used in the SOM. By default NAND Flash is supported.
Note2: Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface.
i.MX6UL SODIMM Module BLOCK DIAGRAM
DDR3 RAM
(256MB)
DDR3 (16bit)
NAND Flash 1
(256MB)
NAND (8bit)
QSPI (4bit)
eMMC 2
(Optional)
MMC (8bit)
µSD Connector 1
(Optional)
ENET1
MMDC
QSPI 2
(Optional)
RMII
RAWNAND/
µSDHC2/
QSPI_A
10/100Mbps
Ethernet PHY
RMII
ENET2
10/100Mbps
Ethernet1
10/100Mbps
Ethernet PHY
10/100Mbps
Ethernet2 2
RMII/DATA UART x 3/Keypad (4x4)
SD (4bit)
2
USB OTG1
USB OTG1
HS PHY
CPU
i.MX6UL
USB OTG2
HS PHY
USB OTG2
SAI2/
JTAG
I2S
SODIMM
PCB Edge
Connector
(200Pin)
JTAG
RGB LCD (24bpp)
LCDIF
Camera (8bit)/eCSPI x 2
CSIO
SD (4bit)
µSDHC1
CAN x 2
FLEXCAN1,
FLEXCAN2
Debug UART
UART1
Note2: Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) not used,
it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface.
DATA UART x 3 (with CTS & RTS)
UART2, 3, 5
I2C x 1
I2C1
PWM x 2
PWM4,
PWM5
Tamper/GPIOs
Tamper/
GPIOs
Power to
Peripherals
Linux 3.14.38
i.MX6UL SODIMM Module
Board Support Packages
User Manual
On-board
PMIC
3.3V
i.MX6UL Development Kit
4.3" LCD Display Kit
Ordering the i.MX6UL SODIMM SOM
The board can be ordered online from the iWave Website
http://www.iwavesystems.com/webforms
iWave Systems Tech. Pvt. Ltd.,
7/B, 29thMain, BTM Layout 2 nd Stage,
Bangalore-560076, India.
Ph:+91-80-26683700, 26786245
Email: mktg@iwavesystems.com
www.iwavesystems.com
iWave Europe
Postbus 6197
3130 DD Vlaardingen
The Netherlands
Ph: +31 10 28403383
Email: info@iwavesystems.eu
iW-G18M-SODIMM-BR-R1.1
Note1: At a time either NAND Flash or eMMC & QSPI flash or µSD &
QSPI flash can be used in the SOM.By default NAND Flash is supported.
Download PDF