Enphase Q Aggregator and Q Cable Accessories

Data Sheet
Enphase Q Cable Accessories
Enphase Q Aggregator
and Q Cable Accessories
The Enphase Q Aggregator™ and Enphase Q Cable™
are part of the sixth generation Enphase IQ System™.
These accessories provide simplicity, reliability, and
faster installation times.
.
Enphase Q Aggregator
• Reduces electrical labor and eliminates wire
nuts for safer, faster installations
• Aggregates up to three fully populated 20A
branch circuits
• Supports solar arrays of up to 11.5 kW with a
single rooftop aggregator
Enphase Q Cable
• Two-wire Enphase Q Cable is 50% lighter than
the previous generation Enphase cable
• New cable numbering and plug and play
connectors speed up installation and simplify
wire management
S.
• Link connectors eliminate cable waste
Field-Wireable Connectors
• Easily connect Q cables on the roof without
complex wiring
• Make connections from any open connector
and center feed any section of cable within
branch limits
• Available in male and female connector types
To learn more about Enphase offerings, visit enphase.com
Enphase Q Cable Accessories
Q AGGREGATOR SPECIFICATIONS
Model number
Q-BA-3-1P-60
Dimensions
190 mm (W) x 227 mm (D) x 80 mm (H) (7.5 in (W) x 9 in (D) x 3.2 in (H))
Enclosure rating
NEMA3 (up to 45° from horizontal)
Temperature range
-40° C to +55° C (-40° F to +122° F)
Compliance
UL1703, EN62109, UL6703A
Q CABLE SPECIFICATIONS
Voltage rating
600V (connector rating 250 V)
Cable temperature rating
90° C (194° F)
Certification
UL3003, DG cable
Flame test rating
FT4
Compliance
RoHS, OIL RES I, CE, UV resistant, combined UL for Canada and United States
Cable insulator rating
THHN/THWN-2 dry/wet
Q CABLE T YPES / ORDE RING OPTIONS
Model Number
Voltage
Connector Spacing
PV Module Orientation
Connector Count per Box
Q-12-10-240
240 (max rating 250 VAC)
1.3 m (4.2 ft)
Portrait
240
Q-12-17-240
240 (max rating 250 VAC)
2.0 m (6.5 ft)
Landscape (60-cell)
240
Q-12-20-200
240 (max rating 250 VAC)
2.3 m (7.5 ft)
Landscape (72-cell)
200
Name
Model Number
Description
Enphase Q Aggregator
Q-BA-3-1P-60
Combines up to three microinverter branches into one home run.
Field-wireable connector (male)
Q-CONN-10M
Make connections from any Q Aggregator open connector
Field-wireable connector (female)
Q-CONN-10F
Make connections from any Q Cable open connector
Cable clip
Q-CLIP-100
Used to fasten cabling to the racking or to secure looped cabling
Disconnect tool
Q-DISC-10
Disconnect tool for Q Cable connectors, DC connectors, and AC module mount
Q Aggregator sealing caps (male)
Q-BA-CAP-10
Sealing cap for unused aggregator connections
Q Cable sealing caps (female)
Q-SEAL-10
One needed to cover each unused connector on the cabling
Terminator
Q-TERM-10
Terminator cap for unused cable ends
Replacement DC Adaptor (MC4)
Q-DCC-2
DC adaptor to MC4 (max voltage 100 VDC)
Replacement DC Adaptor (UTX)
Q-DCC-5
DC adaptor to UTX (max voltage 100 VDC)
E NPHASE Q CABLE ACCESSORIES
TE RMINATOR
SE ALING CAPS
Terminator cap for unused cable
ends, sold in packs of ten
Sealing caps for unused
aggregator and cable connections
(Q-BA-CAP-10 and Q-SEAL-10)
Q-TERM-10
DISCONNECT TOOL
CABLE CLIP
Plan to use at least one per
installation, sold in packs of ten
(Q-DISC-10)
Used to fasten cabling to the racking
or to secure looped cabling, sold in
packs of ten (Q-CLIP-100)
To learn more about Enphase offerings, visit enphase.com
© 2017 Enphase Energy. All rights reserved. All trademarks or brands used are the property of Enphase Energy, Inc.
2017-03-09
Download PDF