Model
FS-4301VPT
Features
1-CH Passive Video & Power Transmitter (12V/24V
DC/AC)
•Color video signal up to 1312ft(400m)via UTP cat5e/6
•Power up to 656ft(200m) with 12VDC power balun receiver hub for 12VDC camera
•Male BNC with extended mini-coax pigtail
•RJ45 Jack for UTP cable
•NTSC, PAL & SECAM video format compatible
•Real-time transmission
•No power required
•Exceptional interference rejection
•Built-in TVS for surge protection
•Lightning protection design Grade:Ⅲ
•50 dB crosstalk and noise immunity
•Wave Filter Design, Anti-Static Design
•Compact size and easy installation
•ABS Engineering plastic housing
Overview
The FS-4301VPT video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signal via cost-effective
Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.
Used with 4/8/16 port 12VDC power balun receiver hub, FS-4301VPT eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 1312ft (400m),
and power transmission up to 656ft(200m).
The superior interference rejection and low emissions of the FS-4301VPT allow video signals to coexist in the same wire bundle as telephone, datacom,
or low-voltage power circuits. This allows the use of a shared or existing cable plant. FS-4301VPT has built-in surge suppressor to protect video equipment
against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
Applications
• Security Monitoring System
• Multimedia Network Teaching System
• Medical Monitoring Display System
• Industrial Automation Control System
• Banking, securities, financial information display system
• Remote Network Server Monitoring
• Department Store Security
• Casino Security
• Hospitals, Airports and banks
• School Campuses
Wire and Cable Recommendations
FS-4301VPT is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should
be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video
signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down
block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.
For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.
1
2
3
4
5
6
7
8
T568A:
White Green
Green
White Orange
Blue
White Blue
Orange
White Brown
Brown
T568B:
White Orange
Orange
White Green
Blue
White Blue
Green
White Brown
Brown
Technical Specifications
Model
Video
FS-4301VPT
Product Name
Single Channel Passive Video and Power Transmitter
Applied Devices
CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video Format
PAL, NTSC, SECAM
Operating Frequency
DC to 5MHz
Max Distance
Common-mode/Differential-mode rejection
Impedance
Wire Type
Power
Connector
Protection
Mechanical
Environmental
UTP Category 5e (24AWG) Color: 1312ft(400m) B&W: 1968ft(600m)
15 KHz to 5 MHz
60 dB typ
Coax, Male BNC 75Ω unbalanced
UTP,RJ45
100Ω balanced
Attenuation
1.5 dB typ Max
Network Wiring
One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
Category Type
2 or better
Impedance
100 ± 20 ohms
DC Loop Resistance
52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance
19 pF/ft max (62 pF/m max)
Power Input
No external power required
Power transmission
12V/24V,DC/AC, up to 656ft(200m) via UTP cat5e/6
Video input/output
Male BNC connector
Video input/output
RJ45 Jack
Surge Protection
renewable solid state surge protection
Video Input
2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Video Output
2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Housing
ABS engineering plastic
Body Color
Black
Dimensions(L*W*H)
60.4*29*20.4mm (BNC connector & cable excluded)
Net Weight
60g
Operating Temperature
-20º ~ 70º C
Relative Humidity
0~95% (non-condensing)
Storage Temperature
-40º ~ 150º C
Application Diagram
Download PDF