sigPOD 1618 Encoder Expansion Module Datasheet

sigPOD 1618
EXPAND YOUR SIGPOD MEASUREMENT HORIZONS WITH
THE NEW 1618 ENCODER EXPANSION MODULE
HIGHLIGHTS
•
Expands the capabilities of any sigPOD 1200, 1400, or 1500 module by
adding 8 quadrature encoder input channels
•
Connects to a sigPOD via USB. Up to eight (8) 1618 modules are supported
when connected to a powered USB hub.
•
Offers performance and flexibility in a compact package
APPLICATIONS
•
Gauging and profiling
•
Powertrain manufacturing quality checks
•
Planarity checks
-
Piston protrusion, valve lash
•
Component dimensional inspection
-
Back-lash verification
-
Shim determination for component positioning
FEATURES
•
Inputs switchable between singleended or differential
•
Up to 10 MHz input frequency,
±12 V input range
•
32-bit counters
•
Two encoder modes (quadrature and
counter)
•
Internal or external pacing and
triggers
TORQUE
TO TURN
CRIMPING
SOUND &
VIBRATION
•
Status LEDs for each encoder input
•
USB bus powered
•
Optional DIN rail mount
•
Encoder power distribution: routes
power to encoders from an external
supply
•
Stream data to sigPOD host at up
to 8 MS/s
WELD
DISPENSE
MONITORING
•
Comes with 1618S Clock
Synchronization module that
synchronizes up to eight (8) 1618
encoder expansion modules and
a host sigPOD
PRESS
FITTING
PROFILING
FUNCTIONAL
TESTING
sigPOD 1618
TECHNICAL SPECIFICATIONS
Encoder Input
• Number of channels:8
• Signal type: Quadrature (X4) and single-phase
• Sensors: Rotary encoders and linear scales
• Index options: Collectable
• Resolution: 32 bit counters (±2 × 109 counts)
• Maximum input frequency:
• 2.5 MHz, Quadrature mode
• 10 MHz, Counter mode
• Input type:
Single-ended or differential (switch selectable)
• Meets or exceeds ANSI EIA-TIA-422-B,
EIA/TIA-423-B, RS-485
• Meets ITU recommendations V.10, V.11,
X.26, X.27
• Maximum input voltage relative to common:
±12 V
• Maximum differential input voltage: ±12 V
• Differential signal threshold: ±200 mV
• Single-ended signal threshold:
< 2.8 V (low)
> 3.2 V (high)
• Input hysteresis: 50 mV, typical
• Input impedance: 12 kΩ, minimum
Synchronization Output (DIO6)
• Output characteristics:
Open-collector; Pulled up to 5 V DC through 10 kΩ
• Output low: <0.8 V
• Output sink current: 500 mA
Synchronization Input: (XPCR)
• General: Latch counter values for read back
• Synchronization input voltage range:
–0.5 V to 7.0 V
• External synchronization input frequency:
8 MHz, maximum
Indicator LEDs
• Power LED:
Indicates that the device microcontroller has
power and is running
• Status LED:
Indicates that the USB is configured; blinks to
indicate USB traffic
• Channel LEDs:
Indicates that the encoder is receiving a valid
signal on any of the inputs
Accessories
• 10500-1618-HUB0 Moxa Uport 407
industrial-grade USB hub 7-port 24-V-powered USB hub with 500 mA current
per USB port
• 10500-1618-DIN0 DIN Rail Mount for Model 1618
Power
• Supply (USB):
4.5 V to 5.25 V at 480 mA maximum (225 mA
typical)
Sensor Excitation
• Sensor power (internal): +5 V DC at 20 mA max
• Sensor power (external): 42 V DC at 2 A
• Protection: Protection diodes (30BQ060, 0.5 V DC
max drop) protecting against reverse polarity
Environmental
• Operating temperature: 0 to 60°C
• Storage temperature: –40 to 85°C
• Humidity: 0 to 90% non-condensing
General
• Dimensions:
245 mm (L) x 146 mm (W) x 50 mm (H)
(9.6” x 5.7” x 2.0”)
• Wire gauge range for screw terminals:
16 AWG to 28 AWG
USB Specifications
• USB compatibility: USB 2.0 high-speed
• USB cable type: A-B cable, UL type AWM 2725
or equivalent (minimum 24 AWG VBUS/GND,
minimum 28 AWG D+/D-)
• Max USB cable length: 3 m (9.84 ft)
ABOUT SCIEMETRIC
Since 1981, Sciemetric’ s process monitoring and quality management systems and software have enabled some of the world’s leading
automotive, medical and industrial manufacturers to gain visibility into and control over their manufacturing processes. On the
production floor, Process Signature Verification (PSV™) technology provides the most accurate determination of process health and part
quality while collecting all data. Manufacturing managers use Sciemetric’s analytic tools to transform the data into actionable information
to reduce costs, manage quality, and maximize yield while providing proof of process compliance and complete line-wide traceability.
www.sciemetric.com
inquiries@sciemetric.com
1-877-931-9200
© 2012 Sciemetric Instruments, Inc. All brand and product names are trademarks or registered trademarks of their respective companies.
Products and specifications subject to change without notice.
Printed in Canada. September, 2012
Download PDF