Quick-Start The adapter in detail Troubleshooting tips

Powerline
Connection Adapter
500 Mbps Chipset
Quick-Start
The adapter in
detail
Troubleshooting
tips
Installing the adapter
Ports, button and LED
Reconnect the adapters to
each other (Pairing)
FAQ and Support
In case the adapters no longer communicate with
each other or have been reset, you have to pair them
again. To execute the Pairing process, plug the
adapters directly into the wall sockets in the same
room.
Always connect the Powerline adapters to the wall
socket - why?
Important
Plug the adapter directly into the
wall power socket to reduce interferences.
Installation manual
Istruzioni d’installazione (retro)
Manuel d’installation (2ème dépliant)
Installationsanleitung (2-tes Faltblatt)
Push the
button of the adapter connected
with the DSL-/Fiber-Gateway for 2 seconds.
Plug the new adapter directly into any wall
power socket next to the device you want to
connect.
Connect the adapter to any device that can
access the Internet (e.g. PC, Internet-TV-Box
or game console) using the provided network
cable.
The LED starts to blink white.
If it does not blink, please repeat this step.
LED
Off
Not powered
button of the adapter
Push the
connected with the DSL-/Fiber-Gateway for 2
seconds.
White
Powerline connection OK
Blinks white fast
Pairing Mode
Blinks white slowly
Eco/Energy Saving Mode
The LED starts to blink white.
Blinks red
No Powerline connection
If it does not blink, please repeat this step.
Powerline adapters react sensitively to
interference sources that are also connected
to your electrical network. Those interference
sources can be power adapters, chargers
etc. When you plug the Powerline adapters
directly into the wall socket and then connect
the devices to the Powerline adapter, the
interferences are minimized thanks to the
integrated filter - so the adapters work more
reliably. For this reason the adapters cover all 3
plugs of your wall socket.
Possible interferences
Interferences occur mainly when you are using
the following devices - microwave oven, hair
dryer, vacuum cleaner, iron, power drill ...
Those interference sources can lead to a brief
interruption of the connection or - in case you
are watching Internet-based TV - to a sound or
picture freeze.
sec.
Powerline is not working
sec.
Push the
seconds.
button of the 2nd adapter for 2
The LED starts to blink white.
Ethernet-Port
If it does not blink, please repeat this step.
Connect your DSL-/Fiber-Gateway or any other
device with an Ethernet port (e.g. PC, Internet-TV-Box
or game console).
Push the
seconds.
The good functioning of Powerline strongly
depends on the existing electrical network. If
the adapters are not working, plug 2 adapters
to wall sockets in the same room. If the LED
lights up continuously in white, the Powerline
adapters are working without any problems. The
reason is most probably your electrical network
that may contain old fuses or phase jumps. In
this case your electrician might be able to help.
Otherwise you can return the adapters after 14
days and get your money back.
You can find more information about using or
troubleshooting the Powerline adapters online on
button of the new adapter for 2
www.mystrom.ch/en/help/faq
sec.
The LED starts to blink white.
Support
If you have a general question please use our
contact form on www.mystrom.ch/en/help/
contacts
sec.
The LEDs of both adapters light up
continuously in white as soon as the Powerline
connection has been successfully established.
If the Pairing was not successful, please try
again. And before Pairing them again, please
reset both adapters.
Button
4
myStrom AG
Alte Tiefenaustrasse 6
3050 Bern / Switzerland
www.mystrom.ch
The LEDs of both adapters light up
continuously in white as soon as the Powerline
connection is established. Your device is now
connected to the Internet.
Pairing
Reconnect the adapters or connect them to an
existing Powerline network – press 2 s
Reset
Sets the adapter to its factory setting. Pairing is
lost – press 10 s
In order to do so, press the
adapter for 10 seconds.
button of each
All
done!
V9 – 03.2015
Download PDF