USER MAINTENANCE
CUSTOMER SERVICE
Cleaning
Many household cleaners contain abrasives and chemical substances,
and should not be used for cleaning plated or plastic fittings. These finishes
should be cleaned with a mild washing up detergent or soap solution, and
then wiped dry using a soft cloth.
SPECIFICATION - PRESSURES
Minimum maintained pressure: 0.1 bar (10 kPa) - Maximum maintained
pressure: 5.0 bar (500 kPa)
SPARE PARTS
Basin / Bath Pillar
Bath 1792.184
Basin 1792.186
1792.189
Bath Filler / Bath Shower Mixer
1815.014
Bath 1792.184
1792.218
Guarantee
Your product has the benefit of our
manufacture's
guarantee
which
starts from the date of purchase. This
guarantee only applies in the United
Kingdom and Republic of Ireland.
Within the guarantee period we
will resolve defects in materials or
workmanship, free of charge, by
repairing or replacing parts or product
as we may choose.
This guarantee is in addition to your
statutory rights and is subject to the
following conditions :
The guarantee applies solely to the
original installation under normal use
and to the original purchaser only.
The product must be installed and
maintained in accordance with the
instructions given in this guide.
Replacement under this guarantee
does not extend the original expiry date.
The guarantee on any replacement
parts or product ends at the original
expiry date.
The guarantee does not cover:
Non product faults (such as damage
or performance issues arising from
incorrect installation, improper
use, inappropriate cleaning, lack of
maintenance, build up of limescale, frost
damage, corrosion, chemical attack,
system debris or blocked filters) or where
no fault has been found with the product.
Water or electrical supply, waste and
isolation issues.
Compensation for loss of use of the
product or consequential or indirect loss
of any kind.
Wear and Tear.
Accidental or wilful damage.
Products purchased ex-showroom
display.
What to do if something goes wrong
If your product does not function
correctly when you first use it, contact
your installer to check that it is installed
in accordance with the instructions in
this manual. If this does not resolve the
issue, contact us for help and advice.
Helpdesk Service
Ring our Customer Services Team for
product advice, to purchase spare parts
or accessories. We will need you to have
your model name or number and date of
purchase.
Mira Honesty Taps
Mira Showers Website
(www.mirashowers.co.uk)
From our website you can download
additional user guides, diagnose faults,
purchase our full range of accessories
and popular spares and refer to our
FAQ’s.
Spares and Accessories
We hold the largest stocks of genuine
Mira spares and accessories.
Contact us for a price or visit our
website to purchase items from our
accessory range and popular spares
(Only available in the United Kingdom).
To Contact Us: UK
Telephone: 0844 571 5000
Fax: 01242 282595
Email – Visit www.mirashowers.co.uk/
contactus
By Post: Mira Customer Services
Dept, Cromwell Road, Cheltenham,
Gloucestershire GL52 5EP
To Contact Us: Eire Only
Telephone: 01 531 9337
E-mail: CustomerServiceEire@
mirashowers.com
TOOLS REQUIRED
GENERAL
Make sure that the item is installed by a competent installer.
Shut off the main water supply.
The installation must comply with the “Water Supply Regulations 1999
(Water Fittings)” or any particular regulations and practices specified by
the local water company or water undertakers.
1792.275
These instructions must be left with the user
1792.220
1792.189
Mira is a registered trade mark of Kohler Mira
Limited.
The company reserves the right to alter product
specifications without notice.
www.mirashowers.co.uk
1211367-W2-C
© Kohler Mira Limited, July 2014
Installation and User Guide
Bath Filler
Water supplies shall be at reasonably balanced pressures from a common
source (e.g. hot and cold supplies both from the same storage or both
from a supply pipe). Where the fitting is supplied from unbalanced supplies
(e.g. hot and cold supplies from separate sources) an ‘Approved’ single
check valve or some other no less effective backflow prevention device
shall be fitted immediately upstream of both hot and cold water inlets.
PATENTS
Design Registration:
001352462
GUARANTEE
Guarantee
The Mira Honesty has been designed for domestic use only, Mira
Showers guarantee the Mira Honesty against any defect in materials or
workmanship for a period of five years from the date of purchase.
For non-domestic installations, Mira Showers guarantee the Mira Honesty
against any defect in materials or workmanship for a period of one year
from the date of purchase.
Bath Shower Mixer
Because the shower hose and handset is capable of dropping below the
spill-over level of the bath which could lead to contamination from backsiphonage of Fluid Category 3 water, an ‘Approved’ single check valve
or some other no less effective backflow prevention device shall be fitted
immediately upstream of both hot and cold water inlets.
A minimum gap of 40 mm is required between the showerhead and the
spillover level of any toilet, bidet or other appliance with a Fluid Category
5 backflow risk.
1
For terms and conditions, refer to the back cover of this guide.
5
6
COLD
HOT
2
7
8
4
9
10
Recommended Usage




Domestic
Light Commercial
Heavy Commercial
Healthcare
COLD
INSTALLATION
Basin Pillar / Bath Pillar
1
HOT
2
3
7
Download PDF