EGLL1 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, contact us at
www.echogear.com. We’re ready to help!
CAUTION:
IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this mount is perfect for you!
weigh MORE than
150 lbs. (68 kg)?
150 lbs.
(68 kg)
is your
2 What
wall made of?
Yes? This mount is NOT compatible.
Visit echogear.com to find a compatible
mount.
Drywall with
wood studs?
DO NOT
install into
drywall alone
Perfect!
Solid concrete or
concrete block?
CAUTION:
Perfect!
you have
3 Do
all the tools
needed?
Tape
Measure
4
Ready to begin?
Pencil
Level
Screw
driver
Electric
Drill
1/2 in.
(13 mm)
Socket
Wrench
Stud
Finder
Awl
?
7/32 in.
(5.5 mm)
Wood
Drill Bit
Concrete Install
(including accessories)
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
No? Perfect – you may continue.
Wood Stud Install
1 Does your TV
Unsure?
Contact customer
service: www.
echogear.com
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at www.echogear.com.
CAUTION: Avoid potential personal injury or property damage!
●
●
●
●
2
This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
The wall must be capable of supporting five times the weight of the TV and mount combined
Do not use this product for any purpose not explicitly specified by manufacturer
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Dimensions
TV INTERFACE
3.9 in.
[100 mm]
15.7 in.
[400 mm]
3.9 in.
[100 mm]
16.9 in.
[430.0 mm]
23.6 in.
[600 mm]
SIDE VIEW
WALL PLATE
1.1 in.
[28.4 mm]
25.6 in.
[650 mm]
16.0 in.
[406 mm] 16.0 in.
[406 mm]
1.9 in.
[48.0 mm]
5.1 in.
[130 mm]
10.7 in.
[271.0 mm]
24.0 in.
[610 mm]
8.7 in.
[222.0 mm]
16.0 in.
[406.0 mm]
3
STEP 1 Attach Brackets to TV
STEP 1 Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Washers
TV Screws
M4/M5
TV
M4 x 12mm
Brackets
02 x4
M4 x 35mm
06 x4
09 x4
M6 x 12mm
M6/M8
03 x4
M6 x 35mm
07 x4
M8 x 16mm
10 x4
04 x4
M8 x 35mm
Spacers
08 x4
01 x2
4
M8 x 20mm
05 x4
22mm
11 x4
1.1 Select TV Screws
1.2 Spacers
M4
M6
M8
a
b
Long S
Screw
crew
Washer
Short Screw
Bracket
Washer
Bracket
Spacer
5
1.3 Attach the TV Brackets
a
Flat Back
02 03 04 05
01
09 10
b
Round Back / Extra Space
06 07 08
11
09 10
CAUTION: Ensure TV brackets are securely
fastened before moving on to the next step.
6
STEP 2 Attach Wall Plate to Wall
For wood stud installations, follow STEP 2A on PAGE 9
For concrete installations, follow STEP 2B on PAGE 12
STEP 2 Parts and Hardware
Lag Screws
Wall Plate
Sections
Connection Plate
Screws
15 x4
Lag Screw Washers
13 x1
12 x1
5/16 x 2¾ in.
M5 x 8mm
14 x4
16 x4
Concrete Installation Kit CMK1 (NOT INCLUDED)
Contact Customer Service at www.echogear.com to have these additional pieces shipped directly to you.
x4
5/16 x 2¾ in.
5/16 x 2¾ in.
x4
.695 x .350 x .075 in.
.695 x .350 x.075 in.
x4
Fischer UX 10 x 60R Anchor
7
STEP 2.1 Assemble Your Wallplate
12
13
14
8
STEP 2A
Wood Stud Option
Min. Wood Stud Size:
nominal 2 in. (51 mm)
actual 1 ½ in. (38 mm)
Min. Wood Stud Size:
nominal 4 in. (102 mm)
actual 3 ½ in. (89 mm)
16 - 24 in. (406 - 610 mm)
Max. 5/8 in. (16 mm)
1
2
3
9
4
5
3 in. (75 mm)
12
13
10
5.5 mm
(7/32 in.)
CAUTION: Avoid potential personal injury or property damage! All four lag screws
15 MUST BE firmly tightened to prevent unwanted
movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
6
12
13
15
16
11
STEP 2B
Solid Concrete or Concrete Block Option
Concrete Installation Kit CMK1 is not included
CAUTION: Avoid potential personal injuries and property
damage! Mount the wall plate assembly directly onto the concrete
surface.
(see page 7) Contact Customer Service at
www.echogear.com to have the additional
hardware shipped directly to you.
CAUTION: Never drill into the mortar between blocks.
Min.
Min.
8 in.
(203 mm)
8 in.
(203 mm)
Min.
16 in.
(406 mm)
1
2
Min.
8 in.
(203 mm)
12
13
3 in. (75 mm)
3/8 in.
(10 mm)
12
CAUTION: Avoid potential personal injury or property damage! All four lag screws 15 MUST BE firmly tightened to prevent unwanted
movement of the wall plate assembly . Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
*Contact Customer Service at www.echogear.com to have the Concrete Installation Kit shipped directly to you.
3
4
*
15
16
13
STEP 3 Attach TV to Wall Plate
HEAVY! You may
need assistance
with this step.
01
CAUTION: Avoid potential personal injury or property damage!
Always make sure your TV brackets 01 are in the locked position so
the TV is securely fastened to the wall plate assembly.
14
Removing the TV
CAUTION: To prevent breaking the locking latch: always pull and hold the
release cords R down while pulling the TV away from the wall.
HEAVY! You may
need assistance
with this step.
R
R
15
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to
make this manual accurate and complete. However, Milestone makes no claim that the information contained
herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in
connection with the installation or use of this product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed
or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this document.
©2016 Milestone AV Technologies. All rights reserved. ECHOGEAR is a Milestone brand. ECHOGEAR and the
ECHOGEAR logo are trademarks of Milestone.
Made in China.
Milestone Global Headquarters • 6436 City West Parkway • Eden Prairie, MN 55344 USA
6901-002639 01
Download PDF