Notes on USB Cable

Notes on USB Cable
FAQ
Notes on USB Cable
The following are some important points relevant to USB cable:
HI-SPEED USB Revision 2.0 SHIELDED 24AWG
1.
The PC must support USB 2.0 or USB 3.0.
2.
Use a double shielding USB cable: Foil+ Braid Shield.
3.
The length of the cable should be limited to less than 1.8 meters.
4.
If a desktop is used, the USB cable must be plugged into the back panel
instead of the front. If a laptop is used, please remove the external
power supply.
5.
When downloading a project through USB cable, please remove all the
other devices that are connected to HMI.
6.
If download fails, the possible cause can be the incompatible USB driver
on PC. Go to Computer Management » Device Manager to check if the
correct USB driver is installed. If not, please go to the installation folder
of EasyBuilder and find the usbdriver folder, to manually update the
driver.
www.weintek.com
Notes on USB Cable
FAQ
www.weintek.com
Download PDF