LIRDCSFP Color Camera

Specification
LIRDCSFP Color Camera
Model
LIRDCSFP
Pick up Element
1/3" SONY 1.3Megapixel CMOS Sensor
Effective Picture Elements
(H×V)
1305(H) X1049(V)
Resolution
720P
Minimum Illumination
0.01 Lux/F1.2
S/N Ratio
More than 50dB
Scanning System
2:1 interface
Synchronous System
Internal, Negative sync.
Auto Electronic Shutter
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Gama Characteristic
0.45
IR Distance
30 Meters (with¢5x 36 PCS Infrared LED )
Video Output
1Vpp, 75Ω
Auto Gain Control
Auto
Power/Current
DC12V(+/-10%)/450mA
Lens
2.8-12mm Manual Zoom Lens
Dimension (mm)
¢131x 93(H)
Weight (g)
800
Storage Temperature
-30~+60℃
RH95% MAX
Operating Temperature
-10~+50℃
RH95% MAX
Vandalproof IR Dome Color Camera
Notes:Before providing power for the
camera, please read this User Guide in
detail!
Franchiser:
Packing List
No
Name
Model
Number
1.
Vandalproof
IR Dome Color Camera
LIRDCSFP
1
User Guide
LIRDCSFP
1
2.
Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.
BRIEF OF PRODUCT
INTRODUCTION
CONNECTING
* Sensor (CMOS)
Adopt SONY 1/3" CMOS Sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Scanning Mode
NTSC or PAL mode.
Monitor
Video
KEY BOARD
DC12V
UP
LIRDCSFP
MENU
* OSD SETTING
RIGHT
LEFT
Link wire rule:
Congratulations on your purchase of this product.
This User Guide suits LIRDCSFP product. We adopt the
latest SONY technical of sensor and driver. The most attractive characteristics are small and easy hidden, suits
the elevator and corridor. In addition, it owns the characters of high definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model are convenient too. It is very good for you to apply to your CCTV
system.
Please read this instruction manual carefully to ensure proper use of the product.
Video
To prevent fire or shock hazarded. Do not expose the unit
Power
3D-NR
AE MODE
ON/OFF
MIRROR
FLIP
BRIGHTNESS
ZOOM IN
ON/OFF
50. 60. 70. 80. 90. 100
IR-CUT
AWB-PRO
AWB-AI
AWB-GW
AWB-CCT
ZONE
MASKING
DIRECTION
COLOR
AREA NO.0 - AREA
NO.7
AREA NO.0 - AREA
NO.3
LANGUAGE
important operating and maintenance (servicing)
TROUBLE AND SOLUTION
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
MOSAIC/WHITE/YELLOW/CYAN/GREEN/
MAGENTA/RED/BLUE/BLACK
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
SAVE&EXIT
enclosure that may be of sufficient Magnitude to constia risk of electric shock to persons.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Note:
Notes:
LOAD DEFAULT
SOFT VERION
uninsulated ‘dangerous voltage’ within the product’s
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
ENGLISH
CHINESE
Instructions in the literature accompanying the appliance.
The symbol is intended to alert the user to the presence of
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
AWB-SZ
OSD
SET
The symbol is intended to alert the user to the presence of
CAUTION:
AWB-TEMPORAL
WB
DC12V Power Supply
ON/OFF
0.10.20......250
AUTO
DAY&NI
GHT
PRESS
GLOBAL/CENTER/CENTERWEIGHT/BLACK
LIGHT/FRONT LIGHT/DISTINGUISH
IMAGE ENHANCE SHARPNESS/CONTRAST/SATURATION
IMAGE
to rain or moisture.
DOWN
●The power supply must through safe attestation. Its output voltage,
current, voltage polarity and operating temperature must match the
camera’s requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high
or too low temperatures. The operating temperature is 30~+60℃. (Recommendatory operating temperature is 10~+50℃.)
● Never make the camera face the sun or bright object. Otherwise, it will damage the CMOS.
● Do not mount the camera near by the radiator or heater.