55” (139cm) UHD LED LCD TV

Table of Contents
55” (139cm) UHD LED LCD TV
Television Overview
2
Instruction Manual
Remote Control
4
L55UTV17b
Important Safety Instructions
6
24 Month Manufacturer’s Warranty
Contents in the Box
9
Basic Setup Guide
10
Caring for the Environment
12
Connection Overview
13
Input Source
16
Channel Menu
17
Picture Menu
21
Sound Menu
23
Time Menu
26
Option Menu
29
Lock Menu
35
Hotel Mode
38
Media Operation
40
Photo Menu
45
Music Menu
46
Movie Menu
47
Text Menu
47
EPG
48
USB Record Function
51
USB Multimedia Playback Format
54
Resolution
55
Troubleshooting
56
Technical Specifications
57
Television Overview
Back Inputs & Outputs
Television Overview
Side Buttons
6
7
8
9
USB2
USB1
10 11
13
12
14
15
16
#4%
Back
5
Side
1.
4
3
Power Button: Turn television on / off
6.
HDMI 4: HDMI connection port
7.
VGA Input
8.
ANT 75: Antenna (RF) connection
9.
2.
Source: Source select
10.
3.
Menu: Enter or exit from Menu
- Use CH +/- to select an option
- Use VOL +/- to adjust an item
11.
4.
CH +/- : Select channel
5.
VOL +/- : Adjust volume
2
USB: USB 2.0
Earphone Output
Optical: Optical cable out
12. AV Input: External AV signal input and relevant right / left sound channel inputs
13. Video/Y - Pb - Pr: Component input and relevant video input
14. HDMI 1 : HDMI connection port
15. HDMI 2: HDMI connection port
16. HDMI 3: HDMI connection port
1
2
3
Remote Control Overview
1.
Power: Turn your television on or put on standby
mode.
17. EPG: (a) Launches the Electronic Programme Guide
(b) Rewind in PVR or Media Player mode.
2.
Mute: To mute sound. Press again or press VOL + to
unmute.
18. TIMESHIFT: (a) DTV channel Timeshift Function.
(b) Play / pause during PVR or media playback.
3
3.
0-9: Select a channel directly while watching television. The channel will change after 2 seconds.
5
4.
DTV / ATV: Switch between analog or digital television.
19. CANCEL: When a page is selected in text mode, it may
take some time before it becomes available. CANCEL
button will return to TV mode. When the required page
is found, the page number will appear at the top of the
television. Press the CANCEL key to return to the text
mode.
2
1
DTV/ATV
4
6
9
P.MODE
S.MODE
SLEEP
7
MENU
SOURCE
11
10
12
13
ENTER
EXIT
DISPLAY
8
14
5.
6.
Return to the previously viewed programme.
S.MODE: Scroll through the different sound
settings.
20. INDEX: (a) Request the index page in Teletext mode.
(b) Exit while in PVR or Media Player.
7.
SLEEP: Select a timer before television turns itself off
automatically.
21. SIZE: Change the size of display in Teletext mode.
8.
MTS: Scroll through Audio modes.
9.
MTS
P.MODE: Scroll through different picture settings.
10. MENU: Opens the Main Menu.
RECLIST
FAV/LIST
REC
FREEZE
EPG
ASPECT
CANCEL
SUB.PG
INDEX
TIMESHIFT
TV/RADIO
SUBTITLE
REVEAL
SIZE
HOLD
RED
GREEN
YELLOW
TEXT
CYAN
Remote Control Overview
11. SOURCE: Press to view and select available input
sources
12. ENTER and
: Allows you to navigate the
on-screen Menus and adjust the system settings to
your preference.
13. EXIT: Exit from the menu or sub-menu and cancel the
current in process ( if applicable )
14. DISPLAY: Press to display the source and channel’s
info.
15. VOL + / - : Increase / decrease the volume.
16. TV / RADIO: Allows you to switch between TV and
Radio modes while watching television.
Remove the battery compartment cover on the rear of the remote control by unlocking the clip and
pulling off. Insert two AAA batteries inside the battery compartment with their + and – ends aligned
as indicated. Do not mix old and new batteries or different types of batteries. Press the cover until you
hear it click into place.
4
P.MODE
S.MODE
MENU
SLEEP
SOURCE
ENTER
22. REVEAL: Reveal or Hide the hidden words.
EXIT
23. COLOURED BUTTONS: In the on-screen menus, these
buttons have different functions as specified by the
colours shown on-screen.
24. CH+ / - : Scan through channels.
25. FAV/LIST: Open the favourite list to select your
favourite channel(s)
26. ASPECT: (a) Adjust picture scale.
(b) Fast forward in Media Player mode.
27. FREEZE: Pause the programme.
28. SUB.PG: (a) Access the sub page.
(b) Next chapter in PVR or Media Player.
29. SUB TITLE: To show subtitles when watching digital
television (depending on availability).
30. HOLD: Hold On or Off for current page display.
31. TEXT: Switch Teletext On and Off.
Battery Installation
DTV/ATV
32. REC LIST: Shows the list of recorded programmes.
33. REC: Begin recording current programme to a
connected USB storage device in PVR Mode.
Note: Teletext is not currently available in Australia.
5
DISPLAY
MTS
15
18
32
33
26
17
19
20
21
22
23
24
RECLIST
FAV/LIST
REC
FREEZE
EPG
ASPECT
CANCEL
SUB.PG
INDEX
TIMESHIFT
TV/RADIO
SUBTITLE
REVEAL
SIZE
HOLD
RED
GREEN
YELLOW
TEXT
CYAN
27
16
25
28
29
30
31
Important Safety Instructions
other materials between the television
and the supporting furniture.
- Educating children about the
dangers of climbing on furniture to
reach for the television and/or its
controls
5.
WARNING! Do not insert any objects into
any openings of the television.
14. Use the power cord with care - do not damage the power cord in any way. If the power
cord is damaged, it must be replaced by
either the manufacturer, the
manufacturer’s service agent or qualified
service personnel. The power cord must be
replaced only with an authorised
replacement from an authorised
service agent.
6.
WARNING! Do not touch any moving parts
of the television.
15. Only use attachments/accessories
specified by the manufacturer.
7.
WARNING! Do not use this television near
water, or in an area exposed to water
splashes or dripping. To avoid the risk of fire
or electric shock, do not expose this television to rain and/or moisture.
16. Unplug this television during lightning
storms or when unused for long periods of
time.
Symbols
The symbols used in this manual or on the back cover of the television set means:
Read this Instruction Manual before use
Enclosures contain dangerous voltages
Please refer to important operating and maintenance/servicing instructions that
accompany the appliance
8.
When using any electrical apparatus, always observer safety regulations and use basic safety precautions to reduce the risk of fire, electric shock, and/or personal injury including any of the following:
1.
Read, keep and follow this Instruction Manual, ensuring to heed all warnings.
2.
Keep out of reach of young children. This
television is not suitable for use by young
children or infirm persons without
supervision. Young children must be
supervised to ensure that they do not play
with the television.
3.
4.
television falling. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
- Using a stable and appropriately
sized television cabinet. Ensure its
stability by using a television safety
strap to attach the television to the
cabinet.
- Use the stand which has been
supplied with your television set.
- Ensuring the television is not
hanging over the edge of supporting
furniture.
- Not placing the television on tall
furniture (e.g. cupboards, book cases
etc.) without anchoring both the
furniture and the television to a suit
able support.
- Ensure that the television is placed
directly on supporting furniture,
avoiding placing fabric, cloth or
This television is not intended for use by
persons (including young children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they are supervised or
have been given instructions concerning
the use of the television by a person who is
responsible for their safety.
Ensure that the television is positioned in a
stable location to avoid the risk of the
6
9.
17. Please consider the environment when
disposing of any batteries.
WARNING! Do not place objects filled
with liquid, such as vases, on or above the
television.
18. Refer all servicing to qualified personnel.
Servicing is required when the apparatus
has been damaged in any way, such as
when the power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
DO NOT immerse in any liquid whilst in use
or whilst cleaning. Clean only with a damp
cloth and dry with a dry towel. Do not use
harsh abrasives as these may
damage plastic parts.
10. DO NOT block ventilation openings. Keep
away from curtains, newspapers and
restricted areas. Install in accordance with
specific manufacturer instructions. Always
allow sufficient space around the
television to avoid overheating.
19. WARNING! Do not use the television
outdoors.
20. For household use only; this television is not
intended for commercial use.
11. DO NOT install near heat sources such as
radiators, gas heaters, stoves or other
apparatus (including amplifiers) that
produce heat. Do not place the television in
direct sunlight.
21. This television is intended to be used in
household and similar applications such as;
- offices and other working
environments;
- farm houses;
- by clients in hotels, motels, bed
and breakfast and other residential
type environments.
12. WARNING! Do not place naked flame
sources, such as lit candles, on the
television.
22. If this apparatus is to be used by a third
party, please supply these instructions
with it.
13. WARNING! Connect to a suitable
100-240V ~ 50/60 Hz power supply only.
7
23. No liability will be accepted for any
personal injury or damage caused by
failure to follow these instructions.
Contents in the Box
26. The mains plus is used as the disconnect
device, the disconnect device shall remain
readily operable.
Check that you have been provided with the following:
24. Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
25. Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
Television
DTV/ATV
P.MODE
S.MODE
MENU
SLEEP
SOURCE
ENTER
EXIT
DISPLAY
MTS
RECLIST
FAV/LIST
REC
FREEZE
EPG
ASPECT
CANCEL
SUB.PG
INDEX
TIMESHIFT
TV/RADIO
SUBTITLE
REVEAL
SIZE
REDG
REEN
HOLD
YELLOWC
TEXT
YAN
Remote Control
Left and Right Feet
Screws
(4 qty)
AAA Batteries
(2 qty)
b
b
Quick Start Guide
Instruction Manual
8
9
Basic Setup Guide
Basic Setup Guide
Attach Feet
Connecting the Antenna and Power
Follow these instructions carefully to assemble the feet to the television.
Each foot has a front and back side - they are not interchangeable. Ensure that you align the
front of the foot with the front of the television, and the back of the foot with the back of the television.
1. Connect one end of the antenna cable to the antenna socket (RF IN) at the back of the television set.
Please note that the antenna cable is not included with your television.
2. Plug the power lead into your nearest power
outlet. For your safety, we recommend using a
power outlet with a power surge protector.
TV signal output
AC power outlet
Turning your Television On & First Time Installation
1.
Lay your television screen down onto a soft and clean surface.
2.
Use the correct sized screw driver to affix the foot, using 2 screws for each side. Repeat the
process for the other side.
IMPORTANT: Ensure that you do not over-tighten the screws.
Press the
power button on the remote control to turn your television on. The television screen will
show the First Time Installation Menu.
•
Use the
buttons to select the OSD
Language to be used for On Screen
Display (OSD).
•
Scroll down and use the
Australi a
buttons to select the Country.
Position and Placement
•
Scroll down using the
select the OK.
buttons to
•
Use the
buttons to select the TV
Connection type.
Make sure that you place your television on supporting furniture that can bear its weight.
Do not expose the television near water, fire places and/or heating apparatuses such as
heaters, candles, lighting etc.
Ensure that the back of the television is free from obstructions in order to keep the
ventilation from being blocked.
•
•
10
Scroll down and use the
buttons to select the Tune Type.
Scroll down using the
the OK.
buttons to select
11
Basic Setup Guide
Connection Overview
The following pages outline the basic connection options available with this Linden television.
After the OSD Language, Country, TV
Connection Type and Tune Type have been
set, your television will start to automatically
tune channels onto your television.
Audio/Video (AV) Input
Press the SOURCE button using either the remote control or the button located on the side of the television set and select the AV option.
#4%
If you don’t want to start Auto Tuning, press
MENU or EXIT and select Yes to exit or Do it
Next Time.
Caring for the Environment
Responsible Disposal of Packaging
The packaging of your television has been selected from environmentally friendly materials and can
usually be recycled. Please ensure the packaging is disposed of correctly. Plastic wrap can be a suffocation hazard for babies and young children, so please ensure packaging materials are out of reach
Earphone Output
and are safely disposed of, and are recycled where possible.
Responsible Disposal of Appliances
At the end of its working life, do not throw out this television with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and
used again. Electrical and electronic appliances contain materials and substances which, if handled or
disposed of incorrectly, could be potentially hazardous on the environment and human health.
Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it
#4%
appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area.
The plug must be rendered useless and the cable cut off directly behind the television to prevent misuse.
12
13
Connection Overview
Connection Overview
PC Input
HDMI Input
Press the SOURCE button on either the remote control or the button located on the side of the
television set and select the PC option.
Press the SOURCE button on either the remote control or the button located on the side of the
television set and select the appropriate HDMI option.
For HDMI1(ARC) Function,
please refer to HDMI CEC
Section on Page 33.
Component Video Input
USB2
Press the SOURCE button on either the remote control or the button located on the side of the television
set and select COMPONENT source.
USB1
Audio Output
YPbPr Output
14
15
Channel Menu
Connection Overview
USB Input
Press the MENU button to enter the Main Menu. Use the
buttons to select the Channel Menu.
Press the SOURCE button on either the remote control or the button located on the side of the television
set and select the MEDIA option.
USB
USB2
USB1
Input Source
Press SOURCE button to display the input source list:
DTV
Digital Television Source
ATV
Analogue Television Source
AV
Audio/Video Input Source
Component
Component Input Source
HDMI1/2/3/4
HDMI Input Source
PC
PC Input Source
USB
USB Input Source
Press
1. Use the
buttons to select the option you want to adjust in the Channel Menu.
2. Press the ENTER button to adjust.
3. Press the ENTER button to save your adjustment and return to the previous menu.
Auto Tuning
This allows you to automatically tune channels onto your television.
From the Channel Menu, use the
buttons to select Auto Tuning then
press the ENTER button to enter the
Auto Tuning sub-menu.
or SOURCE button to scroll through Input Source options.
Press ENTER button to select the highlighted input source. Check the selected Input Source has an
active device attached.
Press EXIT button to quit the Input Source menu.
16
Select from Analogue TV (ATV) or
Digital TV (DTV) tune type and select
the country.
Press the ENTER button to start auto
tuning.
17
Channel Menu
Channel Menu
Programme Edit / Channel Edit
This Channel Tuning page will appear when your
television is auto tuning. There is a progress bar
along the bottom showing the progress rate of
the television channel tuning.
The Programme Edit sub-menu allows you to delete, move or skip television channels which have been
tuned onto your television. From the Channel Menu, use the
buttons to scroll and select Programme Edit, then press the ENTER button to enter the Programme Edit sub-menu.
From the Programme Edit sub-menu, use the
buttons to select the desired channel to edit.
Press the RED button to delete
the selected channel.
DTV Manual Tuning
Press the BLUE button to skip
the selected channel.
This is used to manually tune digital television channels.
From the Channel Menu, use the
buttons
to select DTV Manual Tuning then press the
ENTER button to enter the DTV Manual Tuning
sub-menu.
Use the
buttons to select the channel, then
press the ENTER button to manually tune the
channel. A Signal Strength Indicator is shown
along the bottom of the DTV Manual Tuning
page.
Press the FAV button to add or remove the channel
to your favourite list. Removing a channel will make
your television skip the channel automatically when
using the CH+/- buttons to scroll through the channels.
Signal Information
This allows you to see the strength of the signal received by your television, and is only available when
there is signal from digital television.
From the Channel Menu, use the
buttons to select Signal Information then press the ENTER button
to enter the Signal Information sub-menu.
ATV Manual Tuning
This is used to manually tune analogue television channels.
Logical Channel Numbering (LCN)
From the Channel Menu, use the
buttons to select ATV Manual Tuning then press the
ENTER button to enter the ATV Manual Tuning sub-menu.
This allows the television to automatically match the television’s channel numbers to the local broadcast’s Electronic Programme Guide (EPG) channel numbers.
Use the
From the Channel Menu, use the
buttons to select LCN then press the ENTER button to enter the
LCN sub-menu and select ON or OFF.
buttons to select the channel, then press the ENTER button to manually tune the channel.
18
19
Channel Menu
Software Update
For Service Use Only. Please contact our Customer Support Line on1300 530 800 for further details.
Picture Menu
Press MENU button to display the Main Menu.
Press
buttons select Picture in the Main Menu, then press ENTER or
button to enter.
Please note that programming incorrect software onto the television can compromise the functions of
the television and void the warranty.
1.
Press
2.
Press ENTER and
buttons to select options in the PICTURE menu.
3.
Press MENU button to save your adjustments and return back to the previous menu.
buttons to adjust settings for Brightness, Contrast etc.
Picture Mode
From the Picture Menu, use the
enter the Picture Mode sub-menu.
buttons to select Picture Mode then press the ENTER button to
Alternatively, press PMODE button on your remote to enter Picture Mode.
You can adjust the Picture Mode to Standard, Dynamic, Mild, User.
You can adjust Contrast, Brightness, Colour, Sharpness from User Mode
Use the
buttons to select your desired option, then press
buttons to adjust.
Contrast
Colour
Adjusts the highlight intensity of the picture, however, shadows of the picture is unaffected.
Adjusts colour saturation of the picture.
Sharpness
Brightness
Adjusts the optical fibre output of the entire picture, affecting dark areas of the picture.
20
Adjust the peaking in the detail of the picture.
21
Picture Menu
Color Temperature
Sound Menu
Press MENU button to display the Main Menu.
You can adjust the overall colour hue of the television’s picture from Color Temperature.
Use the
buttons select Sound, then press ENTER or
to enter.
From the Picture Menu, use the
buttons to select Color Temperature then press the ENTER button
to enter the Colour Temp sub-menu.
From the Color Temperature sub-menu, use the use the
buttons to choose between Cold, Normal
and Warm and press ENTER.
To adjust the value of Cold, Normal, and Warm, use the buttons, then press MENU to save your
changes.
Cold
Increases blue tones
Normal
Balances blue and red tones
Warm
Increases red tones
Aspect Ratio
The Aspect Ratio is the proportion between the height and width of a picture.
1.
Press
2.
Press ENTER button to adjust.
3.
Press MENU button to save your adjustments and return to the previous menu.
From the Picture Menu, use the
buttons to select Aspect Ratio then press the ENTER button to
enter the Aspect Ratio sub-menu. Use the
buttons to select between Auto, 4:3, 16:9, Zoom1 and
Zoom2
buttons to select the option that you want to adjust in the Sound Menu.
Sound Mode
From the Sound Menu, use the
buttons to select Sound Mode then press the ENTER button to
enter the Sound Mode sub-menu, or press SMODE on your remote control. Use the
buttons to
select between:
Noise Reduction
This is used to reduce image noise and soften images on the television to improve picture quality.
Music
Preserves original sound
From the Picture Menu, use the
Movie
Enhances treble and base for a rich sound experience
buttons to select Noise Reduction then press the ENTER
button to enter the Noise Reduction sub-menu. Use the
Off
No noise reduction
Low
Detect and reduce some image noise
Middle
Detect and reduce moderate image noise
High
Detect and reduce enhanced image noise
22
buttons to select between:
Sport
Enhances vocals - ideal for sports programmes
Standard
Produces a balanced sound in most environments
User
Select to customise your Sound Settings.
23
Sound Menu
Sound Menu
Balance
Audio Description (AD) Switch
This allows you to adjust your speaker’s output for optimal sound based on your position in
the room.
From the Sound Menu, use the
Balance sub-menu.
Use the
buttons to select Balance then press the ENTER button to enter the
buttons to adjust.
Certain broadcast programmes have Audio Descriptions available.
The AD (Audio Description) describes the sounds of the scenes which are being played on the
television eg. explosion, people walking, jazz music playing etc.
From the Sound Menu, use the
the AD Switch sub-menu.
Auto Volume Level
Use the
buttons to select AD Switch then press the ENTER button to enter
buttons to turn Audio Descriptions ON or OFF.
This reduces the difference in volume between the channel and the programme automatically.
From the Sound Menu, use the
buttons to select Auto Volume Level then press the ENTER button to
enter the Auto Volume Level sub-menu.
Use the
If a broadcasted programme has Audio Descriptions available, audio descriptions will be displayed on
screen.
buttons to turn Auto Volume ON or OFF.
TV Speaker
Surround Sound
This helps create an effect where the sounds surrounds the viewer.
This allows you to switch between using the television’s built-in speakers for sound, or a speaker that is
connected to the television via the HDMI 1 (ARC) output.
From the Sound Menu, use the
buttons to select Surround Sound then press the ENTER button
to enter the Surround Sound Level sub-menu.
From the Sound Menu, use the
the TV Speaker sub-menu.
Use the
Use the
buttons to turn Surround Sound ON or OFF.
buttons to select TV Speaker then press the ENTER button to enter
buttons to switch between External Amp or the television’s built-in speakers.
SPDIF Mode
From the Sound Menu, use the
the SPDIF Mode sub-menu.
Use the
buttons to select SPDIF Mode then press the ENTER button to enter
buttons to select between PCM / AUTO.
24
25
Time Menu
Time Menu
Off Time and On Time
Press MENU button to display the Main Menu.
Use the
buttons select Time, then press ENTER or
to enter.
This allows you to set a time to automatically turn your television OFF or ON.
From the Time Menu, use the
buttons to select Off Time or On Time then press the ENTER button
to enter the Off Time or On Time sub-menu.
Use the
buttons to set the date, month, year
and time you want to set the television to automatically turn OFF or ON.
1.
Press
2.
Press ENTER button to adjust.
buttons to select the option that you want to adjust in the Time Menu.
3.
Press MENU button to save your adjustments and return to the previous menu.
Sleep Timer
This allows you to set a timer to automatically turn your television to Sleep Mode.
From the Time Menu, use the
buttons to select Sleep Timer then press the ENTER button to enter
the Sleep Timer sub-menu.
Select from Off, 15 min - 240 mins. Then, the timer will start.
Clock
This allows you to set the time on your television.
From the Time Menu, use the
Auto Standby
buttons to select Clock then press the ENTER button to enter the
Clock sub-menu.
This allows you to set a timer to automatically set your television to standby.
From the Time Menu, use the
Use the
buttons to set the correct date,
month, year and time.
buttons to select Auto Standby then press the ENTER button to enter
the Auto Standby sub-menu and select from the timer options.
Auto Standby and Sleep Timer - Differences
If you set your television to Auto Standby and use the remote control, the timer starts again. If you
do not use your remote control after you have set your television to Auto Standby, your television will
switch to Standby Mode.
If you want to use your remote control but want your television to switch to sleep within your
selected time, use the Sleep Timer function instead.
26
27
Time Menu
Option Menu
Time Zone
Press MENU button to display the Main Menu.
Use the
This allows you to set the time zone on your television.
From the Time Menu, use the
buttons select Option, then press ENTER or
to enter.
buttons to select Time Zone then press the ENTER button to enter the
Clock sub-menu.
Use the
zone.
buttons to set the correct time
1.
Press
buttons to select the option that you want to adjust in the Option Menu.
2.
Press ENTER button to adjust.
3.
Press MENU button to save your adjustments and return to the previous menu.
On Screen Display (OSD) Language
This allows you set the language displayed in your On Screen Display (OSD).
From the Option Menu, use the
buttons to select OSD Language then press
the ENTER button to enter the Language
sub-menu.
Use the
buttons to select your
desired language, then press ENTER to set.
28
29
Option Menu
Option Menu
Audio Languages
Personal Video Recording (PVR) File System
Certain broadcast programmes have different audio languages available.
From the Option Menu, use the
buttons to select Audio Languages then press the ENTER button to enter the Audio Languages sub-menu.
Use the
The PVR File System allows you to use a check and format a USB hard drive that is plugged into your
television. To record a television programme, you must have USB storage device connected to the television as the television set has no built-in memory.
buttons to select your desired language, then press ENTER to set.
From the Option Menu, use the
buttons to select PVR
File System then press the ENTER button to enter the PVR
Subtitle Language
File System sub-menu.
Certain broadcast programmes have subtitles available in different languages. This allows you to set
the language of the subtitles, if available.
Scroll down to Check PVR File System and press ENTER.
From the Option Menu, use the
buttons to select Subtitle Language then press the ENTER button to enter the Subtitle Language sub-menu.
Use the
buttons to select your desired language, then press ENTER to set.
Hearing Impaired
Certain programmes broadcasted have subtitles available for those who are hearing impaired.
To turn this function on, from the Option Menu, use the
buttons to select Hearing Impaired
then press the ENTER button to enter the Hearing Impaired sub-menu.
Use the
buttons to turn ON or OFF.
This dialogue box will appear, showing the details of the
USB hard drive, particularly the size (how many minutes
of recording time) the USB hard drive has.
Standard Definition (SD)
Subtitles will display if a broadcasted programme has this feature available.
The recordable time available if you are recording an SD
television programme.
ECO Mode
High Definition (HD)
This allows you to change the light output level of the television screen.
From the Option Menu, use the
buttons to select ECO Mode then use the
buttons to select
The recordable time available if you are recording an HD
television programme.
between Low, Middle, High.
OSD Time (On Screen Display Menu)
This allows you to set how long your On Screen Display Menu (OSD) is active before it switches off and
returns to the programme you’re currently watching.
From the Option Menu, use the
the OSD Timer sub-menu.
buttons to select OSD Timer then press the ENTER button to enter
Use the
buttons to select be the timer options: 5 seconds, 15 seconds, 20 seconds, 30
seconds, Off.
30
31
Option Menu
Option Menu
Formatting a USB Storage Device
If you are having problems recording, check that there is sufficient memory left on the USB storage device.
If required, format the USB storage device by:
Restore Factory Default
This allows you to reset all the settings in the Option Menu back to factory default.
From the Option Menu, use the
buttons to select Reset then press the ENTER button to enter the
Reset Factory Default sub-menu.
1.
Save any data currently stored on your USB
storage device onto another storage device,
as any data will be deleted during formatting.
2.
Press MENU and scroll across to the
Option Menu and press ENTER.
3.
Once in the Option Menu, scroll down to PVR
File System and press ENTER.
4.
Once in the PVR File System sub-menu, scroll
down to Format and press ENTER.
5.
The following dialogue box will appear:
Press the button to start formatting the USB
hard drive.
6.
HDMI CEC
HDMI CEC (Consumer Electronics Control) is a feature of HDMI that allows you to control devices connected to the HDMI ARC1 port with your television remote control.
Please note that this function is only available with devices that have HDMI CEC capability.
From the Option Menu, use the
the HDMI CEC sub-menu.
buttons to select HDMI CEC then press the ENTER button to enter
HDMI CEC
Use the
buttons to turn HDMI CEC
ON or OFF.
Auto Standby
This allows you to set your television to
Standby Mode when an HDMI CEC
capable device is set to Standby Mode.
The following progress box will appear:
Use the
buttons to turn Auto
Standby ON or OFF.
Auto TV ON
7.
Once formatting is completed, the dialogue
box will return to the following menu, and
the USB hard drive is ready to use.
This allows you to turn your television ON
when an HDMI CEC capable device is
turned ON.
Use the
buttons to turn TV Auto
Power ON or OFF.
Device Control
This allows you to control HDMI CEC capable devices via your television.
Use the
Device List
buttons to select ON or OFF.
Press the ENTER button to enter the Device
List sub-menu to see the number of devices
connected to your television via HDMI.
32
33
Option Menu
Lock Menu
Store Mode
Press MENU button to display the Main Menu.
For use only in store.
Use the
buttons select Lock, then press ENTER or
to enter.
Blue Screen
When there is no signal available, this allows you to set the screen to blue instead of the white noise
screen. From the Option Menu, use the
buttons to select Blue Screen then use the
buttons to select ON or OFF.
1.
Press
2.
Press ENTER and/or
buttons to select the option that you want to adjust in the Lock Menu.
3.
Press MENU button to save your adjustments and return to the previous menu.
buttons to adjust.
Lock System
This allows you to lock/unlock from making changes in the Lock Menu.
From the Lock Menu, use the
buttons to select System Lock then press the ENTER button to enter
the Lock Menu.
Enter the password to unlock the Lock Menu, then press ENTER.
Default password is 0000.
34
35
Lock Menu
Lock Menu
Set Password
Use the
Key Lock
buttons to select Set Password then press ENTER.
This allows you to lock/unlock the buttons on the back of your television.
Enter the password (default password is 0000) then press ENTER.
From the Lock Menu, use the
Enter new password, and confirm new password, then press
ENTER to set new password.
Lock Menu.
Use the
buttons to select Key Lock then press the ENTER button to enter the
buttons to select ON or OFF.
Master Password
If you forget the password you have set, use
the master code 4711
Channel Lock
This allows you to lock/unlock access to channels on your television.
From the Lock Menu, use the
the Channel Lock sub-menu.
buttons to select Channel Lock then press the ENTER button to enter
Use the
to lock.
Press the
buttons to select the channel you want
button on your remote to lock
the channel.
36
37
Hotel Mode
Hotel Mode
This allows you to control the settings that are on your television. In order to change settings of Hotel
Mode, the System Lock must be set to ON. See Page 35.
Hotel Mode Setting
This switches Hotel Mode ON or OFF. From the Lock Menu, use the
select Hotel Mode Setting. Use the
buttons to select ON or OFF.
buttons to scroll down and
Default Source
This allows you to set which Source Input will be the default for the television when the television is
turned on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Source then use
the
buttons to scroll through the Source options to select the default source.
DTV Type
Set to DTV (digital television).
Default Prog
This allows you to set which television channel will appear when the television is switched on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Prog then
use the
buttons to scroll through the channels to select the default channel.
Max Volume
This allows you to set the maximum volume level on the television.
Input Block
This allows you to lock/unlock the Input Source available on the television.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Max Volume then use
the
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Input Block then press the
ENTER button to enter the Input Block sub-menu.
Use the
buttons to scroll through the
Source options. Use the
buttons to Lock/
Unlock (ON/OFF) the Input Source Options.
buttons to select the maximum volume level.
Default Volume
This allows you to set the default volume level when the television is switched on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to
enter the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Volume then
use the
buttons to select the default volume level.
Clear Lock
This allows you to reset all the settings in Hotel Mode.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to
enter the Hotel Mode sub-menu. Use the
buttons to scroll down and select Clear Lock then press
the ENTER to reset the settings in Hotel Mode.
38
39
Media Operation
Media
Before operating the Media Menu, insert your USB hard drive in to the side of your television.
Press the SOURCE button on your remote control and use the
buttons to select Media then press
ENTER to enter the Media menu.
Media Operation
Use the
buttons to select the file you want to work with and press ENTER to select - a
preview of the file will appear in the centre of the screen and a red tick mark will appear if the file has
been selected correctly.
Press the
button to enter the Sub Menu.
The Sub Menu options will appear on the bottom of the screen - Copy, Delete any file media file on the
USB drive, as well as format the USB drive from the Media Menu.
Media - Sub Menu
Use the
arrows to select Photo, Music, Movie or Text and press the ENTER button.
Use the
buttons to select C drive, and press ENTER.
40
41
Media Operation
Media Operation
Copy
“Ready to paste” will appear on the bottom of the screen. Press the
To copy a file, select the Copy option in the Sub Menu by using the
buttons and press ENTER. A
button to paste the copied
file.
confirmation pop up will appear. Select Start to begin copying the file.
After the file has been copied, the Sub Menu options will now show a Paste option - select Paste, and
press ENTER.
Delete
To delete a file, select the Delete option in the Sub Menu by using the
A confirmation pop up “Determine delete files?” will appear.
Select Yes to delete the file.
42
43
buttons and press ENTER.
Media Operation
Media Operation
Format
Photo Menu
Please note that formatting the USB drive will delete all information on the USB drive. To format the
USB drive, select the Format option in the Sub Menu by using the
buttons and press ENTER. A
confirmation pop up will appear.
This allows you to view image files from your USB device on your television.
From the Media Menu, use the buttons to select Photo then press the ENTER button to enter the Photo
sub-menu.
“Determine formatting U disk” Select Yes to format the USB drive.
Once the format has been completed, be taken back to the C drive menu.
Use the
buttons to select the image file in the Photo sub-menu you want to view, then press
ENTER to select the image. A preview of the image will be shown in the centre off the screen.
Press the
button to make the image full screen.
Press the
button and a range of functions such as Rotate, Zoom in, Zoom Out etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
44
45
Media Operation
Media Operation
Music Menu
Movie Menu
This allows you to play music files from your USB device on your television.
This allows you to watch movie files from your USB device on your television.
From the Media Menu, use the
From the Media Menu, use the
buttons to select Music then press the ENTER button to enter the
Music menu.
Use the
buttons to select Movie then press the ENTER button to enter the
Movie sub-menu.
buttons to select the music file in the Music menu you want to listen to, then press ENTER
Use the
buttons to select the file in the Movie sub-menu you want to view, then press ENTER to
to select the music file. A preview of the music file will be shown in the centre off the screen.
select the music file. A preview of the movie file will be shown in the centre off the screen.
Press the
Press the
button to make the image full screen.
button to make the movie full screen.
Press the
button and a range of functions such as Stop, Play, Pause etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
Text Menu
This allows you to view text files (.txt) on your television.
From the Media Menu, use the
buttons to select Text then press the ENTER button to enter the Text
menu.
Use the
buttons to select the file in the Text sub-menu you want to view, then press ENTER to select
the text file. A preview of the text file will be shown in the centre off the screen.
Press the
button to make the text full screen.
Press the
button and a range of functions such as Fast Forward, Rewind etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
46
47
Media Operation
Electronic Programme Guide (EPG)
Press the EPG button to display the Electronic Programme Guide (EPG).
Press the
button and a range of functions such as Fast Forward, Rewind etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
Recording a Programme - Scheduled
To set a programme to be recorded in the future, connect a USB hard drive to the USB port at the back
of your television.
Press the EPG button, and press the
button and use the
to set the channel,
start time and date, and end time and date.
48
49
Press the
Electronic Programme Guide (EPG)
USB Record Function
Info
Recording a Programme - Current
button, and the programme information and synopsis will be displayed.
To record a programme that is currently being played, connect an USB hard drive to the port on the
back of your television. Press the REC button on your remote control.
The programme will start recording and on-screen functions will appear on the bottom of the screen.
Use the
buttons to switch between Play and Stop. While you are recording a programme, only
Play and Stop will be available.
Remind
This allows you to be reminded of that a programme is about to start being broadcasted. Please note
that this is only a reminder, and will not record the programme.
From the EPG, press the
button, and the following pop up box will be displayed:
A red circle with a white triangle in the middle
the programme is being recorded.
will appear on the top left corner, indicating that
To stop recording, press the REC button and the on-screen functions will appear again on the
Use the
to set the channel, start time
and date for your reminder, and then press
ENTER to set.
bottom. Scroll using the
buttons and select Stop.
The following pop up will appear, confirming to
stop the Personal Video Recording (PVR).
Press the
button to stop the recording.
If you experience any difficulty recording onto
your USB hard drive, follow the USB format
instructions on Page 32.
50
51
USB Record Function
USB Record Function
Playing a Recorded Programme
Timeshift
To view your recorded programme, press
REC LIST, and the following pop up box will appear.
Scroll down to the recording you want to view, and presss
ENTER to play.
Timeshift allows you to pause a broadcasted television program. Timeshift also allows you to resume
watching the program from where it was paused. You need to have a USB hard drive inserted in the
USB port in your television, as your television will essentially start recording the live broadcast programme from where you paused the programme.
Pause a Television Program
Press the TIMESHIFT button on your remote control to pause the television program. A white pause symbol will appear on the top left hand side of the screen to indicate that the programme has been paused.
A white triangle
will appear on the top left corner, indicating that the programme being played
on-screen is a recording.
All the on-screen functions will now be available to use while playing a recorded programme. Press
the REC button and the on-screen functions will appear again on the screen and use the
to scroll
through the functions and press ENTER to activate that function.
To resume watching, press the TIMESHIFT button again. The television will resume playing from where you
have paused the program (playing what it has recorded in that time). A white triangle with a red S in the
middle will appear on the top left hand side of the screen to indicate that the programme playing is from the
Timeshift function, and not live broadcast.
s
Disk not ready - If you press the TIMESHIFT button and a pop up box appears with “Disk not ready”, ensure
that you have a USB hard drive inserted, or your USB storage device may need to be formatted - see Page 32
for details.
52
53
Resolution
USB Multimedia Playback Format
VGA
Resolution
Media
Codec
File
Remark
Ext.
.mp4
Video
800 x 600
1024 x 768
1360 x 768
60
60
60
Vertical Frequency Hz
Audio
MPEG-2, MPEG-4,
HDMI
H.264
.ts/.trp
MPEG-2, H.264
MP3, WMA,
AAC, MP2,
.mov/
MPEG-4, H.264
PCM, AC3
.mpg
MPEG-1, MPEG-2
.dat
MPEG-1
Max Resolution & Frame Rate:
1920 x 1080 @30fps
Resolution
Vertical Frequency Hz
480i
480p
576i
576i
720p
1080i
1080p
2160p
60
60
50
50
50/60
50/60
50/60
20/60
Max Data Rate: 10 Mbps
Movie
YPbPr
Max Resolution: 352 x 288
Max Data Rate: 20 Mbps
MP2
.vob
Resolution
Vertical Frequency Hz
480i
480p
576i
576i
720p
1080i
1080p
60
60
50
50
50/60
50/60
50/60
Max Resolution: 720 x 576
MPEG-2
Max Data Rate: 20 Mbps
Sample Rate: 32K~48KHz
.mp3
-
MP3
-
AAC
Music
.m4a/
.aac
Photo
Bit Rate: 32K~320Kbps
Channel: Mono / Stereo
Sample Rate: 8K~48KHz
Bit Rate: 128K~442Kbps
Channel: Mono / Stereo
.jpg/
Progressive JPEG
Max Resolution: 1024 x 768
.jpeg
Baseline JPEG
Max Resolution: 15360 x 8640
.bmp
-
Max Resolution: 9600 x 6400
Non-Interlaced
Max Resolution: 9600 x 6400
Interlaced
Max Resolution: 1280 x 800
.png
Text
.txt
ANSI / UNICODEGB / UTF8
File Size Max: 1MB
File System: Hi SpeedFS, FAT32, FAT16, NTFS (NTFS compressed files are not supported).
54
55
Troubleshooting
No power
Cannot receive signal
properly
Check if the AC power cable is connected to the television unit and
switched on at the socket outlet. If the television still does not
operate, check the socket outlet has power by trying another
appliance in the socket.
Model
L55UTV17b
Display Screen Type
Direct LED Display
Screen Size
139cm (55”)
Double or Phantom Imaging may occur in high buildings or when
surrounded by mountains. If this scenario occurs, please;
Viewing Angle
178° (Horizontal) / 178° (Vertical)
Aspect Ratio
16:9
Resolution
Ultra High Definition: 3840 (h) x 2160 (v)
Power Requirement
AC 100 - 240V~, 50-60Hz
TV System
PAL / SECAM: BG, DK, I & DVB-T
•
consult television provider; or
•
manually change the direction of external antenna
If you are using an indoor antenna, receiving a signal will be more
difficult. Adjust the antenna until desired picture appears. If image
does not change, an external antenna must be used.
No picture
Check the antenna at the back of the television is connected
properly. Try to select other channels to check whether it is the television or just the channel itself which has problems. Ensure the television
is tuned correctly (follow instructions under Channel Menu on Pages
17 - 20).
Video is working, but no
Try increasing the volume on your remote control. Check that Mute
audio
function on your remote has not been selected.
Press Mute button mute / unmute sound.
Television is not
responding to the
remote.
Operate the remote directly facing the sensor on the front of the television. Check that the batteries’ polarity are installed correctly. Try using
a new set of batteries. The television will return to Standby mode if
there has been no response from the remote.
No video in (PC Mode)
Please check if the display cable connected to the VGA is inserted correctly, and check that the cable is free from bends and not
damaged.
Lost password
Technical Specifications
Master Password: 4711
Use the master password to unlock the television if the password is
lost.
56
Frequency Range
Analogue: 48.25 Mhz - 863.25 Mhz
Digital: VHF (174MHz - 230MHz) UHF (474MHz - 862MHz)
Video In System
PAL / SECAM
Preset Channels
ATV: 200 / DVB-T: 500
Antenna Input Impedance
75Ω
Speaker Output
2 x 8W
Inputs
HDMI x 4, AV Composite, VGA (D-sub), YPbPr, PC Audio, USB x 2
Outputs
Headphone, Optical
Power Consumption
160W
Power Supply - Remote Control
DC 3V (2 x AAA size batteries)
Power Supply - Remote Control
2 x AAA batteries
Dimensions ( L x W x H )
Net Weight
Television With Stand:
1247 x 265.6 x 780mm
Television Without Stand: 1247 x 86.5 x 723mm
Television With Stand:
15.3 kg
Television Without Stand: 14.8 kg
Wall Mounting
VESA Wall Mount Pattern: 200 x 200mm
Specifications
Metric M6 x 4 qty (not included)
Operating Environment
0 - 40 degrees Celsius
57
Note: The LCD panel is a high technology product, giving you finely detailed images. Occasionally,
a few non-active pixels may appear on the screen as a fixed point of colour. This does not affect the
performance of your product.
This Instruction Manual is for reference only. Specifications are subject to change without notice.
Distributed by:
M.E.W. (Australia) Pty Ltd,
15 Vaughan St, Essendon Fields, VIC 3041
ACN 152 719 036
Customer care: Aus-1300 530 800
customercare@lindenproducts.com.au
lindenproducts.com.au
58
While every effort has been made in the preparation of this instruction manual, the publishers
cannot be held responsible for the accuracy of the information contained herein or any
consequences arising from it.
Download PDF