HDMI-TPS-TX95, HDMI-TPS-RX95

HDMI-TPS-TX95, HDMI-TPS-RX95
TPS extenders for single CATx cable
Part No: 9154 0005 (TX95), 9154 0006 (RX95)
Highlight features
■■ DVI and HDMI extension supporting 4K and 3D
■■ Extends DVI or HDMI + Ethernet + RS-232 + IR over
one CATx cable up to 170 m distance
■■ 10/100 Ethernet transmission
■■ Bi-directional RS-232 and IR
■■ HDCP compliant, CEC, EDID transparent
■■ Operation mode switch (Auto or forced Long reach mode)
Lightware HDMI-TPS-TX95 and HDMI-TPS-RX95 twisted pair HDBaseTTM extenders provide extension of
uncompressed Full-HD video for long distances over a single CATx cable. The unit offers bi-directional RS-232,
IR, and Ethernet pass-through all on the same CATx cable that carries the video signal. The TPS extenders support
full HDCP and EDID compliance and works at all standard AV resolutions up to 4096x2130@30Hz and 48-bit color
depth handling all standard audio formats as well as 120 Hz 3D signals. Remote powering is available through the
single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used
standalone formats.
The Auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end
device is in Auto mode or it is a third party HDBaseT device the link will be set to HDBT mode. If the far device is
in forced Long reach mode then the Auto operation will set the Link to Long reach mode.
Stand alone diagram
IR cable
IR emitter
Serial
cable
IR detector
Touch panel
IR cable
Blu-Ray or DVD Player
I
M
D
H
HDMI-HDMI
cable
HDMI-HDMI cable
12V DC
Power adaptor
LAN
HDMI-TPS-TX95
TPS connection
CATx up to 170m
LAN
Ethernet switch
LAN
Serial cable
HDMI-TPS-RX95
Remote powered
HD Projector
Internet
Projection screen
Peterdy 15, Budapest H-1071, Hungary
+36 1 255 3800
sales@lightware.eu
www.lightware.eu
1/3
HDMI-TPS-TX95, HDMI-TPS-RX95
Specification
Applications
■■
■■
■■
■■
■■
Post production studios
Control room
Digital Signage
Multiroom video
Conference rooms, collaborative telepresence
Features
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
DVI and HDMI extension over a single CAT7 cable
Two available operation modes to maximize potential cable length
Operation mode switch (Auto or forced Long reach mode)
Low power mode in Auto operation mode
10/100 Ethernet extension
Bi-directional RS-232 pass-through
Bi-directional IR pass-through
Supports all DVI resolutions up to 1080p or 1920x1200
Supports all HDMI 1.4 resolutions
Compatible with 120 Hz 3D video signals
Remote powered through CATx cable
HDCP compliant, CEC, EDID transparent
Uncompressed video/audio up to 10,2 Gbps
Live, Link detection, Video and HDCP detection LEDs
Rack mounting options
Locking DC connector
Locking DC plug
Data rate:
3.4 Gbps per color
Resolution:
All HDMI 1.4a resolutions supported
Equalization:
Adaptive, automatic
EDID support:
Transparent
HDCP pass through:
Yes
Ethernet pass-through:
Yes
RS-232 pass through:
Yes
IR pass through:
Yes
Overall signal delay:
10µs (including 100m CATx cable)
Power:
Universal power adaptor, DC 12 V 2.5 A
Power consumption (-TX): 3.6 W (typ) 4.2 W (max)
Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
Enclosure:
1 mm metal
Dimensions:
100.4 W x 100.4 D x 26 H mm
Weight:
330 g / product
Compliance:
CE
Warranty:
3 years
Connectors
TX input, RX output:
HDMI connector
TX output, RX input:
RJ45 (TPS interface)
Ethernet:
RJ45
IR In, out:
3.5mm TRS connector (1/8’’ mini-jack)
Serial port:
9-pole D-sub
Power:
Locking DC connector (2.1 / 5.5 mm)
Twist 90° clockwise to lock
Transmitters and receivers front and back view
HDMI-TPS-TX95
Peterdy 15, Budapest H-1071, Hungary
HDMI-TPS-RX95
+36 1 255 3800
sales@lightware.eu
www.lightware.eu
2/3
HDMI-TPS-TX95, HDMI-TPS-RX95
Max cable lengths with the available operation modes
Resolution
Pixel clock rate
1024x768@60Hz
1280x720p@60Hz
Cable lengths (Auto / LR link mode)
CAT5e AWG24
CAT7 AWG26**
CAT7 AWG23
65 MHz
100 m / 130 m*
90 m / 120 m*
120 m / 170 m*
73,8 MHz
100 m / 130 m*
90 m / 120 m*
120 m / 170 m*
1920x1080p@60Hz / 24bpp
148,5 MHz
100 m / 130 m*
90 m / 120 m*
120 m / 170 m*
1920x1200@60Hz
152,9 MHz
100 m / NA
90 m / NA
120 m / NA
1600x1200@60Hz
162 MHz
100 m / NA
90 m / NA
120 m / NA
1920x1080@60Hz / 36bpp
223,6 MHz
70 m / NA
70 m / NA
100 m / NA
3840x2160@30Hz UHD
297 MHz
70 m / NA
70 m / NA
100 m / NA
4096x2160@30Hz 4K
297 MHz
70 m / NA
70 m / NA
100 m / NA
* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz.
** when remote powering is used with AWG26 cables, distances are 20% shorter.
Supplied accessories
PSU-12VU Universal DC adaptor (Part No: 1180 0051)
Wall power adaptor with interchangeable plug for international use.
Universal input: 100-240 V AC, 50-60 Hz, output: 12 V DC, 2.5 A
IR emitter and IR eye
(Part No: 1374 0003 TX, 1374 0002 RX)
IR emitter is supplied with TPS-TX, IR eye is supplied with TPS-RX
units. Needed for IR extension.
Optional accessories
Under desk mounting kit (Part No: 5240 0275)
The UD-kit makes it easy to mount a single device on any flat surface
(e.g. furniture).
Under desk mounting kit double (Part No: 5240 0276)
The UD-kit double makes it easy to mount multiple devices on any flat
surface (e.g. furniture).
Rack shelf (Part No: 5240 0269)
1U high rack shelf provides mounting holes for fastening four quarter-rack sized units. Pocket sized devices can also be fastened on the shelf.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance
Peterdy 15, Budapest H-1071, Hungary
+36 1 255 3800
sales@lightware.eu
www.lightware.eu
3/3
Download PDF