2 Channel 10/100 Mbps Ethernet Electrical To Optical Media

2 Channel 10/100 Mbps Ethernet Electrical To Optical
Media Converter with Optional Power over Ethernet (PoE+)
CNFE200(X)(M,S)(1,2)[POE][HO][/M] Series
HARDENED
803.2at
803.2at
CONVERTER
2
The ComNet Ethernet CNFE200X media converter series are two-channel Ethernet
electrical to optical media converters with optional PoE+. These auto-negotiating
devices accept two 10/100 Mbps electrical inputs and convert this to a single 100
Mbps optical output. This series of media converters are available as multimode
or single-mode and one and two fiber SC and ST optical connectors. The ComNet
exclusive Demux feature allows for port isolation, replicating two media converters
over one fiber. The ComNet exclusive Mux feature prevents network video flooding
of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink
path. The CNFE200(X) series can be powered by wide range AC or DC input while
the CNFE200(X)POE units meet the 802.3at standard and provide 30 watts of PoE+
power, with an option for a 60 watt CNFE200(X)POEHO model. The PoE models
can be powered by a sold seperately 48 to 56 volt DC power supply.
FEATURES
› Optional 30W or 60W PoE+ on ports 1 and 2
› 10/100 Mbps Ethernet
• 2 × 10/100 BASE-T/TX electrical ports
• 100 BASE-FX optical port
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and
other voltage transient events.
› No in-field optical adjustments required
› Electrical ports support Auto-Negotiation for 10 Mbps or
100 Mbps, full duplex or half duplex data.
› Full size units feature a contact closure output for remote
side link failure detection
› Optical port supports 100 Mbps full duplex data
› Standard size is hot-swappable rack module
› Automatic MDI/MDI-X crossover
› Standard size is interchangeable between stand-alone or
rack mount use – ComFit
› Distances up to: 3 km (2 mi) Multimode
20 km (12 mi) Single Mode
› Link Fault Pass-Through feature detects if either of the
copper ports are down and triggers the optical port to
switch states to indicate the failure to the head-end.
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/lowline
voltage conditions and transient voltage protection) of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment.
› S
T or SC optical connectors
› 1 or 2 fiber design
› IEEE 802.3 compliant
› L
ifetime Warranty
APPLICATIONS
› Optical transmission of Ethernet-compatible industrial
security access control systems, intercom systems, VOIP
(Voice over IP) telephony networks, and IP-compatible CCTV
camera surveillance networks
› Optical Ethernet transmission to wireless LAN access points
› Optical transmission of any Ethernet-compatible equipment
with a maximum data rate of 100 Mbps
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
2 Channel 10/100 Mbps Ethernet Electrical To Optical
Media Converter with Optional Power over Ethernet (PoE+)
CNFE200(X)(M,S)(1,2)[POE][HO][/M] Series
SPECIFICATIONS
Ethernet
Electrical & Mechanical
Current ProtectionAutomatic Resettable Solid-State Current Limiters
Circuit Board
Size (L×W×H)
Standard: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Mini: 4.1 × 3.7 × 1.1 in (10.4 × 9.4 × 2.8 cm)
Shipping Weight:<2 lbs./0.9 kg
Data Rate10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full Duplex Optical
Port
Connectors
Optical
ST or SC, 1 or 2 Fibers
Power
Terminal Block
Data
RJ45
Meets IPC Standard
Environmental
LED Indicators
- Optical Link/Data Activity
- Electrical Link/Data Activity
- Power
- Unit Status
- PoE Status
Operating Voltage Range
ini non PoE: 8 to 24 VDC or 22 to 27 VAC
M
Mini PoE: 48 to 56 VDC
Standard: 8 to 24 VDC
Power Consumption
3W (without PoE load)
MTBF
>100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp
Relative Humidity 0% to 95% (non-condensing)1
-40˚ C to +85˚ C
Ethernet Standards
Power
IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-TX and 100BASE-FX
IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE
[1] May be extended to humidity with condensation conditions by
adding suffix ‘/C’
Fault Relay (Full Size Units Only)
Response Time
Output Channels
Rating
25 msec typical
1
0-36V, 190mA (AC or DC)
PoE Pin Assignment
RJ45 ports support IEEE802.3at
End-point Positive (VCC+): RJ45 pin 1, 2 (RJ45 pin 1,2 and 4,5 on 60W ports)
Negative (VCC-): RJ45 pin 3, 6 (RJ45 pin 3,6 and 7,8 on 60W ports)
TYPICAL APPLICATION
E
E
LEGEND
CNFE2002M1B
Optical Fiber
(Fiber count, mode, distance
and connector type are
model dependent)
CNFE2002M1APOE/M
CAT-5 CABLE
OPTICAL FIBER
PoE POWER
48 to 57 VDC
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
2 Channel 10/100 Mbps Ethernet Electrical To Optical
Media Converter with Optional Power over Ethernet (PoE+)
CNFE200(X)(M,S)(1,2)[POE][HO][/M] Series
ORDERING INFORMATION – Standard Mount DC-Only Media Converter
Part Number
Description
Connector
Fibers
Req’d
Fiber
Optical
Pwr
Budget
CNFE2002M1A
2 Channel 10/100 Mbps Ethernet 1310/1550nm
ST
1
Multimode
10 dB
3 km (2 mi)
1
CNFE2002M1B
2 Channel 10/100 Mbps Ethernet 1550/1310nm
ST
1
Multimode
10 dB
3 km (2 mi)
1
CNFE2002S1A
2 Channel 10/100 Mbps Ethernet 1310/1550nm
ST
1
Singlemode
15 dB
20 km (12 mi)
1
CNFE2002S1B
2 Channel 10/100 Mbps Ethernet 1550/1310nm
ST
1
Singlemode
15 dB
20 km (12 mi)
1
CNFE2003M2
2 Channel 10/100 Mbps Ethernet 1310nm
SC
2
Multimode
10 dB
3 km (2 mi)
1
CNFE2003S2
2 Channel 10/100 Mbps Ethernet 1310nm
SC
2
Singlemode
15 dB
20 km (12 mi)
1
CNFE2004M1A
2 Channel 10/100 Mbps Ethernet 1310/1550nm
SC
1
Multimode
10 dB
3 km (2 mi)
1
CNFE2004M1B
2 Channel 10/100 Mbps Ethernet 1550/1310nm
SC
1
Multimode
10 dB
3 km (2 mi)
1
CNFE2004S1A
2 Channel 10/100 Mbps Ethernet 1310/1550nm
SC
1
Singlemode
15 dB
20 km (12 mi)
1
CNFE2004S1B
2 Channel 10/100 Mbps Ethernet 1550/1310nm
SC
1
Singlemode
15 dB
20 km (12 mi)
1
CNFE2005M2
2 Channel 10/100 Mbps Ethernet 1310nm
ST
2
Multimode
10 dB
3 km (2 mi)
1
CNFE2005S2
2 Channel 10/100 Mbps Ethernet 1310nm
ST
2
Singlemode
15 dB
20 km (12 mi)
1
Included Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply available, consult factory)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
ORDERING INFORMATION – Mini AC/DC Power Media Converter (non-PoE)
#
Rack
Max Distance Slots
Part Number
Description
Connector
Fibers
Req’d
Fiber
Optical
Pwr
Budget
CNFE2002M1A/M
2 Channel 10/100 Mbps Ethernet 1310/1550nm
ST
1
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2002M1B/M
2 Channel 10/100 Mbps Ethernet 1550/1310nm
ST
1
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2002S1A/M
2 Channel 10/100 Mbps Ethernet 1310/1550nm
ST
1
Singlemode
15 dB
20 km (12 mi)
N/A
CNFE2002S1B/M
2 Channel 10/100 Mbps Ethernet 1550/1310nm
ST
1
Singlemode
15 dB
20 km (12 mi)
N/A
CNFE2003M2/M
2 Channel 10/100 Mbps Ethernet 1310nm
SC
2
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2003S2/M
2 Channel 10/100 Mbps Ethernet 1310nm
SC
2
Singlemode
15 dB
20 km (12 mi)
N/A
CNFE2004M1A/M
2 Channel 10/100 Mbps Ethernet 1310/1550nm
SC
1
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2004M1B/M
2 Channel 10/100 Mbps Ethernet 1550/1310nm
SC
1
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2004S1A/M
2 Channel 10/100 Mbps Ethernet 1310/1550nm
SC
1
Singlemode
15 dB
20 km (12 mi)
N/A
CNFE2004S1B/M
2 Channel 10/100 Mbps Ethernet 1550/1310nm
SC
1
Singlemode
15 dB
20 km (12 mi)
N/A
CNFE2005M2/M
2 Channel 10/100 Mbps Ethernet 1310nm
ST
2
Multimode
10 dB
3 km (2 mi)
N/A
CNFE2005S2/M
2 Channel 10/100 Mbps Ethernet 1310nm
ST
2
Singlemode
15 dB
20 km (12 mi)
N/A
Inlcuded Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply available, consult factory)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT2 or DINBKT4)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
#
Rack
Max Distance Slots
2 Channel 10/100 Mbps Ethernet Electrical To Optical
Media Converter with Optional Power over Ethernet (PoE+)
CNFE200(X)(M,S)(1,2)[POE][HO][/M] Series
ORDERING INFORMATION – Mini PoE Media Converter
Fibers
Req’d
Fiber
Optical
Pwr
Budget
Max
Distance
Part Number
Description
Optic
Connector
CNFE2002M1APOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, A Side
ST
1
Multimode
10 dB
3 km (2 mi)
CNFE2002M1BPOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, B Side
ST
1
Multimode
10 dB
3 km (2 mi)
CNFE2002S1APOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, A Side
ST
1
Singlemode
15 dB
20 km (12 mi)
CNFE2002S1BPOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, B Side
ST
1
Singlemode
15 dB
20 km (12 mi)
CNFE2002M1APOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, A Side
ST
1
Multimode
10 dB
3 km (2 mi)
CNFE2002M1BPOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, B Side
ST
1
Multimode
10 dB
3 km (2 mi)
CNFE2002S1APOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, A Side
ST
1
Singlemode
15 dB
20 km (12 mi)
CNFE2002S1BPOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, B Side
ST
1
Singlemode
15 dB
20 km (12 mi)
CNFE2003M2POE/M
2 Ch 10/100 Mbps Ethernet 1310nm, 30 W PoE+
SC
2
Multimode
10 dB
3 km (2 mi)
CNFE2003S2POE/M
2 Ch 10/100 Mbps Ethernet 1310nm, 30 W PoE+
SC
2
Singlemode
15 dB
20 km (12 mi)
CNFE2003M2POEHO/M
2 Ch 10/100 Mbps Ethernet 1310nm, 60 W PoE++
SC
2
Multimode
10 dB
3 km (2 mi)
CNFE2003S2POEHO/M
2 Ch 10/100 Mbps Ethernet 1310nm, 60 W PoE++
SC
2
Singlemode
15 dB
20 km (12 mi)
CNFE2004M1APOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, A Side
SC
1
Multimode
10 dB
3 km (2 mi)
CNFE2004M1BPOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, B Side
SC
1
Multimode
10 dB
3 km (2 mi)
CNFE2004S1APOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, A Side
SC
1
Singlemode
15 dB
20 km (12 mi)
CNFE2004S1BPOE/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 30 W PoE+, B Side
SC
1
Singlemode
15 dB
20 km (12 mi)
CNFE2004M1APOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, A Side
SC
1
Multimode
10 dB
3 km (2 mi)
CNFE2004M1BPOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, B Side
SC
1
Multimode
10 dB
3 km (2 mi)
CNFE2004S1APOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, A Side
SC
1
Singlemode
15 dB
20 km (12 mi)
CNFE2004S1BPOEHO/M
2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, B Side
SC
1
Singlemode
15 dB
20 km (12 mi)
CNFE2005M2POE/M
2 Ch 10/100 Mbps Ethernet 1310nm, 30 W PoE+
ST
2
Multimode
10 dB
3 km (2 mi)
CNFE2005S2POE/M
2 Ch 10/100 Mbps Ethernet 1310nm, 30 W PoE+
ST
2
Singlemode
15 dB
20 km (12 mi)
CNFE2005M2POEHO/M
2 Ch 10/100 Mbps Ethernet 1310nm, 60 W PoE++
ST
2
Multimode
10 dB
3 km (2 mi)
CNFE2005S2POEHO/M
2 Ch 10/100 Mbps Ethernet 1310nm, 60 W PoE++
ST
2
Singlemode
15 dB
20 km (12 mi)
Options
48 VDC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Optional, consult factory for application-appropriate power supply)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT2 or DINBKT4)
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
24 Jul 2015
Download PDF

advertising