Paradox DGP-848 DGP2-641BL, DGP2-641RB LCD Keypad Module System Manager’s Manual

Below you will find brief information for LCD Keypad Module DGP-848 DGP2-641BL, LCD Keypad Module DGP-848 DGP2-641RB. The DGP2-641BL and DGP2-641RB LCD Keypad Modules are designed for use with the Paradox DGP-848 security systems. These modules provide users with an intuitive and user-friendly interface to arm, disarm, and control their systems. They feature a 32-character LCD screen that displays messages and menus for easy navigation.

PDF Download
Document
Paradox DGP-848 DGP2-641BL/DGP2-641RB System Manager’s Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 32-character LCD display
  • User-friendly interface
  • Arm/disarm system
  • Control system functions
  • Display system status
  • Multiple area support
  • Access control integration
  • Programmable outputs
  • Event record display
  • Trouble display

Frequently asked questions

To arm the system, enter your access code and press the [ARM] button. You can select the area(s) you wish to arm if your system is partitioned.

The Exit Delay Timer gives you time to exit the protected area before the system is fully armed. It is activated when you arm the system.

To bypass a zone, enter your access code, press the [BYP] button, and then enter the zone number. You can bypass multiple zones by repeating this process.

The Duress feature is used when someone forces you to arm or disarm the system. It allows you to send a silent alarm to the monitoring station by entering a designated Duress code.

To program a user access code, enter the System Master Code, press the [0] button followed by [ACC], enter the desired User Number, enter the new access code, and press the [ENTER] button.
Preparing document for printing…
0%