power splitter - PS3-F1300 - fixed
Product Information
The introduction of DKT PS3-F1300 is our most recent addition to the
highly successful series of DKT’s power splitters serving networks all
over Europe. The frequency range has now been enhanced to meet
Docsis 3.1 requirements.
With the DKT PS3-F1300 we have focused on designing the most
compact and flexible 2-way splitter/directional coupler on the market
fitting applications in Europe using street cabinets and underground
cables. The compact size makes installation in even small street
cabinets possible.
The electrical performance is in comliance with CENELEC’s highest
standards just as in the case with the other DKT products.
PS3-F1300 - fixed is produced to below specifications and as shown in
the diagram to the right.
All Power Splitter models have spring-loaded terminals mounted on
the PCB. So the PG11 adapter can be installed without dismounting
the power splitter lid.
3-port Power Splitter
Type
Frequency Range
Description
PS3-F1300-02
PS3-F1300–1-7
PS3-F1300–1-11
PS3-F1300–1-16
2-way splitter
1-way tap 7dB
1-way tap 11dB
1-way tap 16dB
40621
40622
40623
40624
4.0 ± 0.7
3.0 ± 0.7
1.6 ± 0.6
1.1 ± 0.6
Item no.
5 - 470 MHz
Insertion Loss (IN-OUT) (dB)
Tap Loss (IN-TAP) (dB)
Isolation (OUT-TAP) (dB)
Return Loss (dB)
470 - 1006 MHz
4.1 ± 0.8
3.3 ± 0.8
1.7 ± 0.8
1.2 ± 0.7
1006 - 1300 MHz
4.7 ± 1.0
4.3 ± 1.0
2.9 ± 0.9
2.1 ± 0.8
16.5 ± 1.0
5 - 1300 MHz
-
7.8 ± 1.3
10.5 ± 1.0
5 - 10 MHz
≥ 20
≥ 21
≥ 23
≥ 25
10 - 470 MHz
≥ 25
≥ 22
≥ 23
≥ 24
470 - 1006 MHz
≥ 21
≥ 20
≥ 21
≥ 23
1006 - 1300 MHz
≥ 20
≥ 20
≥ 20
≥ 22
5 - 10 MHz
10 - 1300 MHz
Housing
Aluminium with anti corrosive painting
Connectors
PG11 female - optional 5/8” - spring loaded clamp
Power Passing
Max. 10A
Hum Modulation (64V, 6A)
< - 70 dB
7 - 10 MHz
Group Delay (Δf 2 MHz)
≥ 16
Grade 21
10 - 25 MHz
25 - 1300 MHz
< 12 ns
< 3 ns
< 1.5 ns
Screening Effectiveness
Class A2
Operating Temperature
-20 to +60 °C
Dimensions (mm)
150 x 90 x 55
Weight (kg)
0.5
EN60728-4 Grade 2
10-47 MHz ≥ 18 dB
47-1300 MHz min. 18 dB ÷ 1.5/oct.
2
Screening Effectiveness:
EN60728-2 Class A
5-300 MHz ≥ 85 dB, 300-470 MHz ≥ 80 dB
470-950 MHz ≥ 75 dB, 950-1300 MHz ≥ 65 dB
1
Return Loss:
Version 3.0 June 9, 2016
power splitter - PS3-F1300 - flexible
Product Information
The introduction of DKT PS3-F1300 is our most recent addition to the
highly successful series of DKT’s power splitters serving networks all
over Europe. The frequency range has now been enhanced to meet
Docsis 3.1 requirements.
With the DKT PS3-F1300 we have focused on designing the most
compact unit with a flexible choice for the specific network setup
and to save inventory costs. Additionally, it can be used as a platform
for power insertion through placement of bridge plug-in modules.
The compact size makes installation in even small street cabinets
possible.
The electrical performance is in comliance with CENELEC’s highest
standards just as in the case with the other DKT products.
PS3-F1300 - flexible is produced to below specifications and as shown
in the diagram to the right.
All Power Splitter models have spring-loaded terminals mounted on
the PCB. So the PG11 adapter can be installed without dismounting
the power splitter lid.
Type
Bridge (dB)
Splitter (dB)
Tap (dB)
Plug-in modules
Item no.
Port A
Port B
Port C
PIM 0A 1G3
40530
In
0.7 ± 0.5
AC in
PIM 0B 1G3
40531
In
AC in
0.7 ± 0.5
PIM 0C 1G3
40532
AC in
In
0.7 ± 0.5
PIM 4 1G3
40533
In
4.0 ± 1.5
4.0 ± 1.5
PIM 1-7 1G3
40534
In
7.5 ± 1.5
2.9 ± 1.0
PIM 1-10 1G3
40535
In
10.5 ± 1.5
2.3 ± 1.0
PIM 1-13 1G3
40536
In
13.2 ± 1.5
1.8 ± 1.0
PIM 1-16 1G3
40537
In
16.5 ± 1.5
1.3 ± 1.0
PIM 1-19 1G3
40538
In
19.1 ± 1.5
1.3 ± 0.8
PIM 1-22 1G3
40539
In
22.0 ± 1.5
1.3 ± 0.8
PIM 1-26 1G3
40544
In
26.0 ± 1.5
1.3 ± 0.8
Frequency range (MHz)
Return loss (dB)
5-1300
5 - 10 MHz
≥ 16
10 - 1300 MHz
Grade 21
Connectors
PG11 thread - optional 5/8” – optional 5/8”
Power pass
Max. 10 A
Hum modulation (64 V, 6 A)
< - 70 dB
Screening effectiveness
Class A2
Dimensions (mm)
Weight (Kg)
150 x 90 x 55
0.5
EN60728-4 Grade 2
10-47 MHz ≥ 18 dB
47-1300 MHz min. 18 dB ÷ 1.5/oct.
2
Screening Effectiveness:
EN60728-2 Class A
5-300 MHz ≥ 85 dB, 300-470 MHz ≥ 80 dB
470-950 MHz ≥ 75 dB, 950-1300 MHz ≥ 65 dB
1
Return Loss:
Version 3.0 June 9, 2016
power splitter - PS5-F1300-fixed
Product Information
The introduction of DKT PS5-F1300 is our most recent addition to the
highly successful series of DKT’s power splitters serving networks all over
Europe. The frequency range has now been enhanced to meet Docsis 3.1
requirements.
With the DKT PS5-F1300 we have focused on designing the most compact and
flexible 2-way splitter/directional coupler on the market fitting applications
in Europe using street cabinets and underground cables. The compact size makes installation in
even small street cabinets possible.
The electrical performance is in comliance with CENELEC’s highest standards just as in the case
with the other DKT products.
PS5-F1300 - fixed is produced to below specifications and as shown in the diagram to the right.
All Power Splitter models have spring-loaded terminals mounted on the PCB. So the PG11 adapter
can be installed without dismounting the power splitter lid.
5-Port Power Splitter
Type
Frequency Range
Description
PS5-F1300–03
PS5-F1300–03A
PS5-F1300-04
PS5-1300–2-12
3-way splitter
3-way splitter asym.
4-way splitter
2-way tap 12dB
Item no.
5 - 470 MHz
Insertion Loss (IN-OUT) (dB)
Tap Loss (IN-TAP) (dB)
40630
40631
40632
40633
6.0 ± 0.7
4.2 ± 0.7 / 7.3 ± 0.7
7.5 ± 0.7
2.1 ± 0.6
470 - 1000 MHz
6.3 ± 1.0
4.2 ± 1.0 / 7.7 ± 1.0
7.8 ± 1.0
2.3 ± 0.7
1000 - 1300 Mhz
7.2 ± 1.0
4.5 ± 1.0 / 8.5 ± 1.0
8.7 ± 1.0
3.0 ± 0.8
5 - 1300 MHz
Isolation (OUT-OUT) (dB)
-
-
-
12.4 ± 1.0
5 - 10 MHz
≥ 20
≥ 22
≥ 22
≥ 20 / 27
10 - 470 MHz
≥ 25
≥ 22
≥ 25
≥ 25 / 32
470 - 1000 MHz
≥ 21
≥ 21
≥ 21
≥ 21 / 25
1000 - 1300 MHz
≥ 20
≥ 20
≥ 20
≥ 20 / 22
5 - 10 MHz
Return Loss (dB)
≥ 16
10 - 1300 MHz
Grade 21
Housing
Aluminium with anti corrosive painting
Connectors
PG11 female - optional 5/8”- spring loaded clamp
Power Passing
Max. 10A
Hum Modulation (64V, 6A)
< - 70 dB
7 - 10 MHz
Group Delay (Δf 2 MHz)
< 12 ns
10 - 25 MHz
< 3 ns
25 - 1300 MHz
< 1.5 ns
Screening Effectiveness
Class A2
Operating Temperature
-20 to +60 °C
Dimensions (mm)
209 x 96 x 56
Weight (kg)
0.7
In
Out
Out
Out
PS5B - 10A - 03A
AC in/out
Out
In
Out
Out
three-way splitter asynchronous
AC in/out
Two-way tap
PS5B - 10A - 03
Return Loss:
three-way splitter
PS5B - 10A - 2 - 12
EN60728-4 Grade 2
10-47 MHz ≥ 18 dB
47-1300 MHz min. 18 dB ÷ 1.5/oct. and min. 14dB
2
Screening Effectiveness:
EN60728-2 Class A
5-300 MHz ≥ 85 dB, 300-470 MHz ≥ 80 dB
470-950 MHz ≥ 75 dB, 950-1300 MHz ≥ 65 dB
1
AC in/out
Version 3.0 June 9, 2016
Out
In
Out
Out
confree - two-way splitter with trunk
or ac feed
Product information
The introduction of DKT ACP3 P1 F1300 is our most recent addition to the
highly successful series of DKT’s power splitters serving networks all over
Europe. The frequency range has now been enhanced to meet Docsis 3.1
requirements.
With the DKT ACP3 P1 F1300 we have focused on designing the most compact
unit with a flexible choice for the specific network setup and to save
inventory costs. Additionally, it can be used as a platform for power insertion
through placement of bridge plug-in modules. The compact size makes
installation in even small street cabinets possible.
The electrical performance is in comliance with CENELEC’s highest standards
just as in the case with the other DKT products.
ACP3 P1 F1300 Item no. 41651
PIM type
Item no
Unit
Out 1
Out 2
PIM 0A 1G3
40530
(dB)
0.6 ± 1.0
-
PIM 0B 1G3
40531
(dB)
-
0.6 ± 1.0
PIM 4 1G3
40533
(dB)
4.7 ± 1.0
4.7 ± 1.0
PIM 1-7 1G3
40534
(dB)
7.9 ± 1.5
2.9 ± 1.0
PIM 1-10 1G3
40535
(dB)
10.9 ± 1.5
2.4 ± 1.0
1.7 ± 1.0
PIM 1-13 1G3
40536
(dB)
13.4 ± 1.5
PIM 1-16 1G3
40537
(dB)
15.9 ± 1.5
1.4 ± 1.0
PIM 1-19 1G3
40538
(dB)
18.9 ± 1.5
1.3 ± 1.0
PIM 1-22 1G3
40539
(dB)
22.0 ± 1.5
1.3 ± 1.0
PIM 1-26 1G3
40544
(dB)
26.0 ± 1.5
1.3 ± 1.0
Frequency range
(MHz)
Return loss
5-1218
5 - 10 MHz
(dB)
≥ 16
10 - 1300 MHz
Grade 21
Connector
PG11 thread - optional 5/8” or cable shells
Power pass
Max 10 A
Screening effectiveness
Class A2
Hum modulation (64 V, 6 A)
Dimensions
Weight
< - 70 dB
(mm)
154 x 107 x 55
(kg)
0.8
ACP4 P2 Item no. 41604
Item no
Unit
Out 1
Out 2
PIM 4 + PIM 4
PIM type
40533/40533
(dB)
4 ± 1.0
8 ± 1.0
8 ± 0.5
PIM 1-7 + PIM 4
40534/40533
(dB)
7.5 ± 1.0
6.5 ± 1.0
6.5 ± 0.5
PIM 1-10 + PIM 1-7
40535/40534
(dB)
11 ± 1.0
9 ± 1.0
4 ± 0.5
PIM 1-13 + PIM 1-13
40536/40536
(dB)
13.5 ± 1.0
14.5 ± 1.0
3 ± 0.5
PIM 1-16 + PIM 1-16
40537/40537
(dB)
16 ± 1.0
17 ± 1.0
2.2 ± 0.5
PIM 1-19 + PIM 1-19
40538/40538
(dB)
19 ± 1.0
19.5 ± 1.0
2 ± 0.5
Frequency range
(MHz)
1
Return Loss:
EN60728-4 Grade 2
10-47 MHz ≥ 18 dB
47-1300 MHz min. 18 dB ÷ 1.5/oct. and min. 14dB
2
Screening Effectiveness:
EN60728-2 Class A
5-300 MHz ≥ 85 dB, 300-470 MHz ≥ 80 dB
470-950 MHz ≥ 75 dB, 950-1300 MHz ≥ 65 dB
Connector
Max 10 A
Hum modulation (64 V, 6 A)
< - 70 dB
Weight
5-1006
PG11 thread - optional 5/8” or cable shells
Power pass
Dimensions
Trunk output
(mm)
154 x 107 x 55
(kg)
0.8
Version 3.0 June 9, 2016
accessories
Product information
DKT offers a wide range of connectors and adapters for the Power
Splitter and ConFree series. These provide fast and easy installation without compromising the the very high quality, and this by
ensuring a low insertion loss.
Common to all PG11M adaptors
(Where applicable)
Data
Insertion loss (dB)
≤ 0.1
Return loss
≥ Grade 11
Screening efficiency
PG11M-ACF-2 Item no.: 81903
Class A2
Material
Used to feed AC power, with cuttable pin
for the right fit.
Brass
Plating
Nickel-tin
Center conductor
Phosphor bronze or Beryllium copper
Center conductor plating
Nickle-tin
CENELEC EN60728-4 Grade 1
5-47 MHz ≥ 22 dB, 47-1006 MHz ≥ 22 dB ÷ 1.5 dB/oct. min. 14 dB
2
Screening effectiveness:
CENELEC 50083-2 Class A
5-300 MHz ≥ 85 dB, 300-470 MHz ≥ 80 dB
470-950 MHz ≥ 75 dB, 950-1006 MHz ≥ 65 dB
1
Return loss:
PG11M-5/8”F Item no.: 87049
Reduction ring, transforms PG11 socket
into 5/8” socket.
Power Splitter
ConFree
Description
Adaptor from PG11 into
F-female, with cuttable
pin for the correct fit,
MEX connectors are not
cuttable.
PG11M-FF Item no.: 87100
PG11MEX-FF Item no.: 87150
Adaptor from PG11
into IEC14-female,
with cuttable pin for
the correct fit, MEX
connectors are not
cuttable.
PG11M-IECF Item no.: 87102
PG11M-3,5/12F Item no.: 87110
PG11MEX-IECF Item no.: 87151
PG11MEX-3,5/12F Item no.: 87152
Adaptor from PG11
into 3,5/12-female,
with cuttable pin for
the correct fit, MEX
connectors are not
cuttable.
Download PDF