179 KB 1st Dec 2014 Schlage electronic REPTR400 Wireless

REPTR400
Wireless Repeater Kit
Overview
Features and benefits
The Schlage REPTR400 Wireless Repeater Kit is a simple, all-in-one package solution
for access control applications that require an extended wireless range. The Schlage
REPTR400 includes an AD Series Panel Interface Module (PIM400-TD2) and an
AD Series Wireless Reader Interface (WRI400). The PIM400-TD2 interfaces with
most access control systems. The WRI400 gathers signals from around the door
components and wirelessly transmits them back to the PIM400-TD2.
§§
Convenient kit includes the WRI400 and
PIM400-TD2
§§
Extends the reach of your access control
system to remote locations without
running wires
§§
WRI400:
The REPTR400 extends the wireless range by receiving information on one radio
frequency (RF) channel and retransmits it on another RF channel. Each REPTR400 can
extend the wireless range of your access control system by up to 200 feet indoors or up
to 1000 feet, line of sight.
-- 2 form C relay outputs –strike and auxiliary
-- Each RF transmission is encrypted with
AES-128 bit keys
-- Reader interfaces support– Wiegand
(data1/data 0) up to 255 bits and magnetic
stripe (Clock & Data) up to 255 bits
The use of multiple REPTR400’s in series allows an indefinite expansion of the RF signal
between the access control panel and the Schlage AD Series Wireless Reader Interface
of Schlage AD-400 electronic locks.
Use of the REPTR400 allows you to extend the reach of your access control system to
remote locations without running wires, thus saving you time and money on installation.
For example, the REPTR400 can be used for gate applications. The PIM400 is located
inside of a building, up to 500 feet from the access control panel. A remote antenna
(sold separately) can be wired into the PIM400 and installed on the exterior of the
building. The REPTR400 can be installed at the gate, up to 1000 feet away, with a clear
line of sight, connecting the card reader and locking hardware to the WRI400. This
solution eliminates the need for considerable trenching and the installation of an access
control panel at the gate location, while giving the access control system real-time
information at the remote gate.
-- UL 294 certified
§§
PIM400-TD2:
-- 900 MHz spread spectrum RF technology
for long range, reliable communications
-- Supports up to two AD Series wireless
devices
-- Automatic linking to remote wireless
access points with 10 channel frequencies
to select from enables easy commissioning
-- AES-128 bit encrypted spread spectrum
transmissions
-- UL 294 certified
Allegion, the Allegion logo, Schlage, and the Schlage logo are trademarks of Allegion plc, its subsidiaries and/or
affiliates in the United States and other countries. All other trademarks are the property of their respective owners.
REPTR400
PIM400-TD2 specifications
Frequency range
902-928 MHz
Modulation
900 MHz spread spectrum,
direct sequence, 10 channels
Communication
Up to 200 ft (normal
building construction); up to
1000 ft, clear line of sight
Operating
temperature
-31° to 151°F (-35° to 66°C)
Humidity
0% to 100% condensing
Power supply
12 VDC or 24VDC
(12 VDC power supply
included)
Dimensions
(H x W x D)
7.1" x 7.1" x 3.0"
(18.0 cm x 18.0 cm x 7.6 cm)
Weight
1.25 lb (.56 kg)
Certifications
NEMA 1, 4, 4X, 6; UL 294;
FCC Part 15; RoHS; Industry
Canada (IC)
Access
control
panel
Wireless up to 200’
(normal building construction),
up to 1000’ line of sight
Hardwired
PIM400
WRI400
Hardwired
12V
power
supply
PIM400-TD2
Power
supply
Wireless up to
200’ (normal building
construction), up
to 1000’, line
of sight
WRI400
Ceiling Line
DPS
Card
reader
Finish floor
Note: There are many other applications that use different wireless access points; this is one
example of how a REPTR400 can be used.
WRI400 specifications
Frequency range
902-928 MHz
Modulation
900 MHz spread spectrum, direct sequence, 10 channels
RF interference avoidance
Optional dynamic channel switching
Transmission/encryption
AES-128 bit key (optional)
Data rate
RF: 40 kbps
Credential verification time*
< 1 second*
Communication range
Up to 200 ft (61 m), normal building construction
Up to 1000 ft (305 m), clear line of sight (See ANT400-REM data sheet for
increasing distance)
Power supply requirements
12 VDC or 24 VDC; 500 mA maximum current
Connector cable
specifications
DC power input
18AWG, 2 conductor (Belden 8760 or equivalent), up to 1000 ft (305 m)
Credential readers (x2)
Data signals: 22AWG, 6 conductor (Alpha 1296C or equivalent) up to 500 feet
(152 meters)
Reader tamper signals: 18AWG, twisted pair shielded (Beldon 8760 or equivalent) up to
500 feet (152 meters)
Strike/aux relay outputs
18AWG, 2 conductor (Belden 8760 or equivalent), up to 2000 feet (610 meters)
Request-to-enter and
-exit inputs
18AWG, 2 conductor (Belden 8760 or equivalent), up to 2000 feet (610 meters)
Strike output relay
Form C relay; 6 amps at 24 VDC or 6 amps at 120 VAC or 3 amps at 240 VAC
Auxiliary output relay
Form C relay; 2 amps at 24 VDC or 0.5 amps at 120 VAC
Relay output
tolerances
Operating temperature
-31°F (-35°C) to 151°F (66°C)
Operating humidity
0 - 100% condensing
Dimensions (H x W x D)
10.43" x 7.28" x 3.79" (26.49 cm x 18.49 cm x 9.63 cm)
Certifications
NEMA 1, 4, 4X, 6; UL 294; FCC Part 15; Industry Canada (IC); RoHS
Optional accessories
593P1-12 DC - power supply for Panel Interface Module (PIM)
Available through one of our GSA schedule 84 approved distributors
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a
$2 billion provider of security solutions for homes and businesses, Allegion employs
more than 7,800 people and sells products in more than 120 countries across the world.
Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®,
Schlage® and Von Duprin®. For more, visit www.allegion.com.
© 2014 Allegion
004015, Rev. 02/14
www.allegion.com/us
Download PDF