E-Series - cs.psn

E-Series
Basic Setup/ Operation Guide
7th Nov 2014
Security Systems Business Division
Panasonic System Networks Co., Ltd.
<NOTICE>
This document is supplementary to the
operation manual.
Depending on the firmware version used
for E-Series NVR or camera, the screens
may differ from the actual screens.
Set Up Flow
3
<Hardware Setup of NVR>
HDD Installation
Display and Power Supply connection
<Startup Wizard on NVR>
<Additional Settings on NVR>
SYSTEM Log in
Camera Encode Setting
General Setting
(Camera Image Setting)
Network Setting
<Additional Settings on Camera>
Camera and PC LAN Connection
Camera Registration
Camera NTP Server Setting
Recording Schedule Setting
Hardware Set up of NVR
5
HDD Installation
6
Display and Power Supply Connection
K-NL304K/G
Display Output
(VGA or HDMI)
USB Mouse
(front or back)
DC Power (48V)
DC Power (12V)
NOTE : 2 DC powers are required
K-NL308K/G
LAN Port (192.168.0.x)
AC Power (100 -240 V,)
Display Output
(VGA or HDMI)
USB Mouse
(front or back)
Setup Wizard on NVR
8
Startup Wizard(1/3)
Password : 12345
Uncheck the button,
the setup wizard is cancelled next time
General Setting
General Setting / Date & Time
Select local time
Change if necessary
Recommend to set NTP server
if internet is available
Startup Wizard(2/3)
9
Camera Registration
Network Setting
Change if necessary
<Step1>
Make sure you decide
which camera to
go to which channel.
CH1
CH2
CH3
CH4
Port1
Port2
Port3
Port4
<Step2>
Plug in the CH1 camera
into the PoE port1 first
<Step3>
“Device Search” and “Device Add”
are executed automatically.
Check channel # and Port# are same
After CH1 camera registration,
repeat step 2 & 3 for another cameras
10
Startup Wizard(3/3)
Schedule Setting
End of Startup Wizard
24/7 recording is set as default
Additional Setting
on NVR/ Camera
12
Additional Settings(1/6)
Click here to start additional setting
Additional Settings(2/6)
13
Camera Encode Setting
CBR is
recommended
Max 2M bps
recommended
14
Change if necessary
Additional Settings(3/6)
Camera Image Setting
Video image adjustment
Change if you want to keep color mode during night time
15
Additional Settings(4/6)
Camera and PC LAN Connection
Pull out LAN cable connected to camera
from PoE port
Connect the camera and PC to LAN switch.
(Require to configure IP address setting
“10.1. 1. x” for PC)
16
Additional Settings(5/6)
Camera Browser Access
Start Config. Tool
Right Click
The Camera is listed together with another devices
connected the same LAN switch
ID : admin
PWD : 12345
Right Click, then select “Open Device Web”
17
Additional Settings(6/6)
Camera NTP Server Setting
Select NTSC
If max 30 fps is required
Set NTP and
NVR IP address
(Default 10.1.1.1)
18
Easy Operation
19
Camera Preview (Live View) Interface
Real time Playback button : latest time playback
Digital Zoom button
Manual Record button : record on USB memory
Preview control interface
Snapshot button
Point cursor to
upper side
of the screen
Right Click!
Shortcut Menu
Playback and Search Mode
20
Playback and Search Interface
Video / Snapshot selection for playback
“Record” : Video select
“PIC” : Snapshot select
Calendar for playback
(Blue Highlighted date)
There is recorded data
(Yellow colored date)
Currently selected for playback
Playback Control Pane
(Play/Pause/Play Backwards/
Fast Playback/Rewind/Slow Play)
Window split mode(1/4/9)
Playback channel selection
Display file list of the day
Time Line Bar
Can change scale of time line
Download PDF