“Zelio Logic” programmable relays

Presentation,
description
“Zelio Logic”
programmable relays
Presentation
p
p
p
p
The “Zelio Logic” Programmable relay is designed for use in small automated systems.
It is suitable for use in both industrial sectors and commercial premises.
Its compactness and ease of setting-up provide a competitive alternative to basic cable logic or specific card solutions.
The ease of programming, ensured by the universality of the contact language, meets all automation requirements
and also the needs of the electrician.
p The versions without display or buttons provide not only a competitively priced solution, but also the confidentiality
of applications.
p Programming can be performed either locally, using keypad + LCD display, or by using “Zelio Soft” software.
Description
500381_1
SR1-A, SR1-B
1 23
4
I1
I2
I3
I4
I5
I6
IB
IC
6
Del.
Ins.line
7
8
z1
z4
z2
z3
Esc.
Retractable fixing lugs
Screw terminal supply connections
4 line, 12 character, LCD display
Screw terminal input connections
Screw terminal 0 – 10 V analogue input connections,
suitable for discrete c (only applicable to SR1-B)
6 Cancellation button
7 Line insertion button
8 Navigation buttons or Z button after configuration
9 Selection and validation button
10 Escape button (Esc.)
11 Slot for memory back-up and for transfer from one
product to another (optional) or for programmable
relay/PC connecting cable.
12 Screw terminal relay output connections
13 Location for re-usable label
1
2
3
4
5
5
9
10
11
Sel./OK
12
1
13
“Zelio Logic” main screen
1
2
3
4
1 Input status indication
2 Programmable relay RUN or STOP mode indication
3 Indication of a parameter (date and time by default for
programmable relays with clock)
4 Output status indication
500382_1
SR1-D, SR1-E
1 2
3
I1
I2
I3
I4
1
2
3
4
4
I5
I6
IB
IC
5
U/Run
5
6
6
8
7
8
Retractable fixing lugs
Screw terminal supply connections
Screw terminal input connections
Screw terminal 0 – 10 V analogue input connections.
suitable for discrete c (only applicable to SR1-E)
U/RUN: operating LED
Steady: power on, Stop mode
Flashing: Run mode
Fast flashing: relay fault
Slot for memory back-up and for transfer from one
product to another (optional) or for programmable
relay/PC connecting cable
Screw terminal relay output connections
Location for re-usable label
7
1
Back-up memory
p Allows a programme to be copied into another programmable relay (examples: for building identical equipment,
remote transmission of updates).
p The memory also allows a back-up copy of the programme to be saved prior to exchanging the product.
p When used with a programmable relay without display or buttons, the copy of the programme contained in the
cartridge is automatically transferred into the programmable relay at power-up.
Characteristics:
pages 6 to 9
2
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
Schneider Electric
Presentation,
description (continued)
Contact language
Function
Contact
“Zelio Logic”
programmable relays
Electrical
scheme
N/O
Ladder
language
14
Zelio programmable
relay symbol
13
Ix
Ix
ix
ix
Ix
Ix
ix
ix
I corresponds to the real state of the contact
connected to the input of the programmable
relay.
or
or
N/C
22
or
21
Notes
i (or I) corresponds to the inverse state of
the contact connected to the input of the
programmable relay.
or
The coil is energised when the contacts to which
it is connected are closed.
A1
Standard coil
The coil is energised when the contacts to which
it is connected are closed.
It remains tripped when the contacts re-open.
SQ
R
RQ
The coil is de-energised when the contacts to
which it is connected are closed.
It remains inactive when the contacts re-open.
A2
Unlatch coil (Reset)
S
A1
A2
Latch coil (Set)
A1
A2
Qx
Example
Cabled logic
2 alternatives with Zelio programmable relay
23
Start
Stop
I1
I2
Q
13
13
24
Stop
KM1
A1
14
Q
14
Start
(1)
A2
– KM1
orQ1
– KM1
or
(1) KM1 = Q1
Start
Stop
I1
I2
Q
Q
Q1
– KM1
Characteristics:
pages 6 to 9
Schneider Electric
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
3
Functions
Functions
“Zelio Logic”
programmable relays
The Zelio Logic programmable relay comprises:
- 8 Time delay function blocks, each with 8 choices of parametering,
- 8 Counter function blocks,
- 8 Analogue function blocks, each with 7 choices of comparator parametering,
- 4 Clock function blocks, each comprising 4 channels.
Time delay function block
TTp: time delay control input
RTp: time delay reset to zero
Tp: time delay output
a: Zelio symbol/type of time delay
s: time base
t 00.00: time delay value
: locking of time delay value
When inputting data to the time delay
function block TT1, a window automatically opens for the inputting of
the various parameters.
CCp: counting input
RCp: counter reset to zero
Cp: counter output
DCp: count up/down selection
p: preset value
: locking of preset counter value
In the first programming line, each
pulse at input I1 increments or decrements the counter C1.
Input I2 determines the counting
direction, either up or down.
: clock block output
ABCD: time zones
MO 14: 32: current date and time
MO –>TH: first day/last day
ON: start time
OFF: off time
: locking of time zones
The insertion of the clock block will
enable output Q1 to change state in
accordance with the preset time
zones.
Counter function block
Clock function block
Programming example with 2 time zones
Channel A time zone
From Monday to Friday, the active
time zone will be from 8: 00 (ON)
until 21: 00 (OFF).
Channel B time zone
For Saturday and Sunday, the active
time zone will be from 9: 00 (ON)
until 12: 00 (OFF)
Analogue function block
A4: analogue block output
Ref: reference voltage
IB ≤ Ref: type of operation available
The analogue function block controls
output Q 4 according to the result of
the comparison.
: locking of analogue block reference
value
In this example, output Q 4 changes
state when the value of the analogue
input IC is greater than the 6.4 V
reference voltage.
Characteristics:
pages 6 to 9
4
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
Schneider Electric
Functions (continued)
“Zelio Logic”
programmable relays
Modes
Parametering mode
This mode centralises all the parameters relating to unlocked function blocks that are used in the programme.
Any of these parameters can be modified.
In this example, the user can modify:
- the preset time delay value T1,
- the preset counter value C1,
- the reference voltage of analogue block A1,
- the parameters of clock block n˚1 (date, time zones).
Display mode
This mode enables display of the current values of the various function blocks used in the programme. It is also
possible to select one of these values for display on the screen instead of the date and time.
In this example, the user has the option of displaying the current values of:
- the time delay T1,
- the analogue input IC,
- the counter C1.
The value IC has been selected for being permanently displayed on the main screen instead of the date and time.
Diagnostic mode
This mode is accessible after the Zelio programmable relay is set to RUN.
Main screen
Programming screen
Changing to programming mode allows all the active and inactive elements of the programme to be displayed.
All active elements appear in reversed video.
Characteristics:
pages 6 to 9
Schneider Electric
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
5
Characteristics
“Zelio Logic”
programmable relays
Environmental characteristics
Approvals
UL, CSA, C-TICK
Degree of protection
IP 20
Temperature
Operation
Readability of display
Storage
˚C
˚C
˚C
- 20...+ 55 conforming to IEC/EN 60068-2-1 and 60068-2-2
0...+ 55 conforming to IEC/EN 60068-2-1 and 60068-2-2
- 25...+ 70 (conforming to IEC/EN 61131-2)
Maximum relative humidity
%
95 without condensation or dripping water
Altitude
m
0…2000
Mechanical resistance
Immunity to vibrations
Immunity to mechanical shock
Conforming to standard IEC/EN 60068-2-6, test Fc
Conforming to standard IEC/EN 60068-2-27, test Ea
Resistance to electrostatic discharge Immunity to electrostatic
discharge
Conforming to standard IEC/EN 61000-4-2, level 3 (1)
Resistance to HF interference
Conforming to standard IEC/EN 61000-4-3, level 3 (1)
Connection to screw terminals
(Tightened using Ø 3.5 screwdriver)
Immunity to electromagnetic
radiated fields
Immunity to rapid,
pulsed transients
Immunity to surges
Immunity to damped
oscillatory waves
Conforming to standard IEC/EN 61000-4-4, level 3 (1)
Conforming to standard IEC/EN 61000-4-5
Conforming to standard IEC/EN 61000-4-12
Flexible cable with cable end
mm2
Semi-rigid cable
Rigid cable
mm2
Tightening torque
N.m
mm2
1 conductor: 0.14…1.5, cable: AWG26…AWG16
2 conductors: 0.14…0.75, cable: AWG26…AWG18
1 conductor: 0.14…2.5, cable: AWG26…AWG14
1 conductor: 0.14…2.5, cable: AWG26…AWG14
2 conductors: 0.14…1.5, cable: AWG26…AWG16
0.6
Supply characteristics
B121JD
p1p1BD
V
c 12
c 24
a 100...240
V
10.2...14.4
19.2…30
a 85…264
Nominal frequency
Hz
–
–
50-60 (47...63)
Nominal input current
mA
105
83
130
45
a 100 V ≤ 50
a 240 V ≤ 27
a 100 V ≤ 80
a 240 V ≤ 40
Heat dissipation
W
1.3
1.6
2.9
1.1
3
5.3
Programmable relay type
SR1-
Primary
Nominal voltage
Voltage limits
Including ripple
Micro-breaks
Acceptable duration
Isolation voltage
Protection
Primary/earth
Vrms
p201BD
B122BD p101FU
p201FU
≤ 1 ms, repeated 20 times
≤ 10 ms, repeated 20 times
–
Against polarity inversion
2000 (50-60 Hz)
–
Processing characteristics
Programmable relay type
SR1-
Number of control scheme
lines
B121JD, p1ppBD, SR1-p101FU
p201BD, SR1-p201FU
60
80
Maximum cycle time
ms
6
8
Response time (2)
ms
12 to 24 (SR1-B121JD and
p1ppBD)
20 to 40 (SR1-p101FU)
14 to 26 (SR1-p201BD)
Back-up time in case of power failure
Day/time
H
22 to 42 (SR1-p201FU)
≥ 72 to 40 ˚C
only applicable to SR1-B and SR1-E
For life, internal EEPROM
At each power-up
Programme and adjustments
Programme memory checking
(1) Minimum level under test conditions defined by the standards
(2) Time between change of state of an input and change of state of an output directly linked by the programme in the same cycle.
Presentation:
pages 2 to 5
6
References:
pages 10 and 11
Dimensions:
pages 12
Schemes:
pages 12 and 13
Schneider Electric
Characteristics (continued)
“Zelio Logic”
programmable relays
Discrete c 24 V input characteristics
Programmable relay type
SR1-ppppBD
I1 to IA
Input
Connection
SR1-ppppJD
Screw terminals
SR1-pppBD
IB and IC
SR1-pppJD
Screw terminals
Nominal value of inputs
Voltage
Current
V
mA
24
3
12
3
24
0.62
12
0.21
Input
switching
limit values
Voltage
Current
Voltage
Current
V
mA
V
mA
≥ 15
> 1.8
<5
< 0.5
≥ 6.5
> 1.6
< 6.2
< 1.5
≥ 9.9
0.16
<5
0.08
≥ 9.9
0.16
<5
0.08
kΩ
8
4
38
57
ms
ms
0.3 (fast)…3 (slow)
0.5 (fast)…5 (slow)
3 (not configurable)
5 (not configurable)
Yes, type 1
Yes PNP
No
No
Yes
No
State 1
State 0
Input impedance at state 1
Configurable response time
State 0 to 1
State 1 to 0
Conformity to IEC/EN 61131-2
Sensor compatibility
3-wire
2-wire
Type of input
Isolation
Resistive
Between supply and inputs
Between inputs
None
None
AC (a 100…240 V) input characteristics
Programmable relay type
SR1-pp01FU
Connection
Screw terminals
Nominal value of inputs
Voltage
Current
115 V
240 V
Frequency
Input switching limit values
V
a 100…240
mA
mA
0.65
1.3
Hz
47…63
At state 1
Voltage
Current
V
mA
≥ 79
≥ 0.4 (U = 240 V)
At state 0
Voltage
Current
V
mA
< 40
< 0.3
Response time
State 0 to 1
State 1 to 0
50/60 Hz
50/60 Hz
ms
ms
45…50 (U = 110 V), 85…90 (U = 240 V)
45…50 (U = 110 V), 18…22 (U = 240 V)
Isolation
Between supply and inputs
Between inputs
None
None
Integral analogue input characteristics
Programmable relay type
Analogue inputs
Conversion
Isolation
Number of channels
Voltage range of input
Input impedance
Maximum non destructive voltage
Resolution
Conversion time
Schneider Electric
SR1-B121JD
2
0…10
62.5 to 10 V
± 30
± 15
8 bits
Relay cycle time
Precision
at 25 ˚C
at 60 ˚C
± 1.6 % of the full range
± 2.9 % of the full range
Repeat accuracy
at 55 ˚C
< 0.1 % of the full range
Between analogue channel & supply V
Cabling distance
Presentation:
pages 2 to 5
V
kΩ
V
SR1-BppppBD
m
References:
pages 10 and 11
Dimensions:
page 12
None
10 max with screened cable (sensor not isolated)
Schemes:
pages 12 and 13
7
Characteristics (continued)
“Zelio Logic”
programmable relays
Relay output characteristics (screw terminal connections) (1)
Programmable relay type
Number of outputs
Without common potential
SR1-B121JD, SR1-p1p1BD,
SR1-p101FU
SR1-p201BD, SR1-p201FU
4
8
Operating limit values
V
c 5…150, a 24…250
Contact type
Thermal current
A
N/O
8
DC-12
V
A
24
1.5
DC-13
V
A
24 V L/R = 10 ms
0.6
AC-12
V
A
230
1.5
AC-15
V
A
230
0.9
mA
10
Electrical durability
for 500,000 operating cycles
Minimum switching capacity
Utilisation category
At 5 V minimum voltage
Lower power switching
reliability of contact
Maximum operating rate
17 V - 5 mA
Failure rate for 100 million operating cycles: 1
No-load
Hz
10
At le
Hz
0.5
Mechanical life
Rated impulse withstand
voltage
In millions of operating cycles
Conforming to IEC/EN 60947-1
kV
10
2.5
Response time
Trip
Reset
ms
ms
10
5
Built-in protection
Against short-circuit
None. The use of a protection device (fuse or circuit-breaker) is
recommended for each channel or group of channels
None. Connect in parallel to the terminals of each preactuator an
RC circuit, MOV (ZNO) suppressor or an appropriately sized diode
for the voltage
Against overvoltage and overload
Transistor output characteristics (screw terminal connections)
Programmable relay type
Number of outputs
SR1-B122BD
With positive polarity common
potential
Operating limit values
4 (PNP)
V
19.2…30
Nominal voltage
V
c 24
Nominal current
A
0.5
Maximum current
A
0.625 at 30 V
Drop out voltage
At state 1
V
≤ 2 for I = 0.5 A
Response time
Trip
ms
≤1
Reset
ms
≤1
Loads
Built-in protection
Against overload and short-circuits
Against overvoltage (2)
Against inversions of power supply
(1) Characteristics at 55 ˚C for 60 % loading of inputs/outputs or at 45 ˚C for 100 % loading of inputs/outputs.
(2) If there is no volt-free contact between the relay output and the load.
Presentation:
pages 2 to 5
8
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
Schneider Electric
Curves
“Zelio Logic”
programmable relays
Electrical durability of relay outputs (in millions of operating cycles) (conforming to IEC/EN 60947-5-1)
DC-13 (2)
3,0
Millions of operating cycles
Millions of operating cycles
d.c. loads
DC-12 (1)
2,5
48 V
2,0
24 V
1,5
1,0
0,5
1,4
L/R = 10 ms 48 V
1,2
L/R = 10 ms 24 V
1,0
L/R = 60 ms 48 V
0,8
L/R = 60 ms 24 V
0,6
0,4
0,2
0,0
0,0
0
0,5
1
1,5
0,1
2
0,2
0,3
0,4
0,5
0,6
0,7
0,8
a.c. loads
AC-12 (3)
1
AC-14 (4)
3,0
Millions of operating cycles
Millions of operating cycles
0,9
Current (A)
Current (A)
2,5
24 V
2,0
48 V
1,5
110 V
1,0
230 V
2,5
2,0
110 V
1,5
230 V
1,0
48 V
24 V
0,5
0,5
0,0
0,0
0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5
0
0,2
0,4
0,6
0,8
1,0
Current (A)
1,2
1,4
1,6
1,8
2
Current (A)
Millions of operating cycles
AC-15 (5)
1,0
0,9
0,8
110 V
0,7
230 V
0,6
48 V
0,5
0,4
0,3
0,2
0,1
0,0
0,5
0,7
0,9
1,1
1,3
1,5
1,7
1,9
Current (A)
(1) DC-12: switching resistive loads and photo-coupler isolated solid state loads, L/R ≤ 1 ms.
(2) DC-13: switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with protection diode on load, use
the DC-12 curves and apply a coefficient of 0.9 to the millions of operating cycles value).
(3) AC-12: switching resistive loads and photo-coupler isolated solid state loads, cos ≥ 0.9.
(4) AC-14: switching electromagnetic loads whose power drawn with the electromagnet closed is ≤ 72 VA, making: cos = 0.3, breaking: cos = 0.3.
(5) AC-15: switching electromagnetic loads whose power drawn with the electromagnet closed is > 72 VA, making: cos = 0.7, breaking: cos = 0.4.
Presentation:
pages 2 to 5
Schneider Electric
References:
pages 10 and 11
Dimensions:
page 12
Schemes:
pages 12 and 13
9
References
“Zelio Logic”
programmable relays
Programmable relays
816716
Number
of I/O
Discrete
inputs
Outputs
Clock
Reference
Weight
kg
8 I c 12 V (1)
4 O relay
Yes
SR1-B121JD
0.290
10
6 I c 24 V
4 O relay
No
SR1-A101BD
0.290
12
8 I c 24 V (1)
4 O relay
Yes
SR1-B121BD
0.290
4 O transistor
Yes
SR1-B122BD
0.290
12 I c 24 V
8 O relay
No
SR1-A201BD
0.350
12 I c 24 V (1)
8 O relay
Yes
SR1-B201BD
0.350
4 O relay
No
SR1-A101FU
0.290
Yes
SR1-B101FU
0.290
No
SR1-A201FU
0.350
Yes
SR1-B201FU
0.350
Supply c 12 V
12
Supply c 24 V
SR1-B121BD
20245
20
Supply a 100/240 V
10
20
6 I a 100/240 V
12 I a 100/240 V
8 O relay
SR1-A201BD
20247
Programmable relays without display and without buttons
Supply c 24 V
10
6 I c 24 V
4 O relay
No
SR1-D101BD
0.270
12
8 I c 24 V (1)
4 O relay
Yes
SR1-E121BD
0.270
4 O relay
No
SR1-D101FU
0.270
Yes
SR1-E101FU
0.270
Supply a 100/240 V
10
6 I a 100/240 V
SR1-E121BD
Kits
Description
Reference
Weight
kg
d.c. Zelio SR1B121BD + cable and software
SR1PACKBD
0.548
a.c. Zelio SR1B101FU + cable and software
SR1PACKFU
0.548
Separate accessory
SR1PACKpp
Description
Reference
EEPROM memory
SR1-MEM01
Weight
kg
0.001
Documentation
Description
Language
Reference
Weight
kg
User’s guide
for direct programming
on the relay
English
SR1-MAN01EN
0.100
French
SR1-MAN01FR
0.100
German
SR1-MAN01DE
0.100
Italian
SR1-MAN01IT
0.100
Spanish
SR1-MAN01ES
0.100
(1) Including 2 configurable analogue inputs.
Presentation:
pages 2 to 5
10
Characteristics:
pages 6 to 9
Dimensions:
page 12
Schemes:
pages 12 and 13
Schneider Electric
Description,
references (continued)
“Zelio Logic”
programmable relays
“Zelio Soft” software
816721
“Zelio Soft” software enables:
- inputting of control schemes,
- monitoring of applications, using its coherence test feature,
- inputting of messages for display on the “Zelio Logic” Programmable relay,
- programme testing.
Input modes for control schemes
816720
“Zelio input” mode enables users who have directly programmed the Zelio programable relay to find the same user
interface, even when using the software for the first time.
“Free input” mode, which is more intuitive, is very user-friendly and incorporates many additional features.
Using Zelio Soft in “free mode” enables users to select their preferred symbol language from the following 3
alternatives :
- Zelio symbols,
- Ladder symbols,
- electrical symbols.
“Free input” mode also enables the creation of mnemonics and notes associated with each line of the programme.
Instant switching from one input mode to the other is simply achieved, at any time, by clicking the mouse.
Coherence test and application languages
816719
Zelio Soft monitors applications via its coherence test function and turns red at the slightest input error. The problem
can be located by simply clicking the mouse.
Zelio Soft allows switching between the 6 application languages (English, French, German, Italian, Portuguese and
Spanish) at any time, and editing of the application file in the selected language. It allows selection of the representation
mode (Zelio, Ladder or electrical) for editing the file.
Inputting messages for display on Zelio Logic
816718
Zelio Soft allows 4 Text function blocks to be configured, corresponding to 4 screens of 4 lines x 12 characters, which
can be displayed on all the programmable relays with LCD display. These screens are activated in the same simple way
as a coil in the control scheme. It is then possible to display messages as text only or to associate them with 1 or 2
variables, the latter being current values and/or setting values of function blocks used in the programme.
Programme testing
The Zelio Soft simulator makes it possible to test all the programmes, i.e.:
- activate discrete inputs and their contact modes (N/O or N/C, fleeting or continuous),
- display the output states,
- vary the voltage of the analogue inputs IB and IC,
- activate the buttons,
- simulate the application programme in real time or accelerated time,
- dynamically display, in red, the various active elements of the programme.
.
References
Description
Reference
Weight
kg
Programmable relay-PC connecting cable
length 1.8 m
SR1-CBL01
0.350
Kit comprising:
- “Zelio soft” autonomous programming software
- cable.
SR1-KIT01
0.500
“Zelio Soft” multilingual programming software (1)
SR1-SFT01
0.150
(1) EN/FR/DE/ES/IT/PO - contains the on-line user’s guide for the PC.
Zelio Soft
Presentation:
pages 2 to 5
Schneider Electric
SR1Version 1.2
Version 1.3
Version 1.4
≥ Version 1.5
Characteristics:
pages 6 to 9
A
Yes
Yes
Yes
Yes
B
Yes
Yes
Yes
Yes
Dimensions:
page 12
B122BD
No
Yes
Yes
Yes
B121JD
No
No
No
Yes
D
No
No
Yes
Yes
E
No
No
Yes
Yes
Schemes:
pages 12 and 13
11
Dimensions,
schemes
“Zelio Logic”
programmable relays
Dimensions
60
=
90
90
59,5
=
110
=
72
100
SR1-p2pppp
100
SR1-p1pppp
110
Programmable relays SR1-pppppp
=
126
Schemes
3-wire sensors
pp1BD, SR1-B121JD
on SR1-p
Analogue inputs
on SR1-B121BD, SR1-B121JD
on SR1-B201BD
0 - 10 V ANALOGUE
+
(1)
+
24 V
Ca / Ta
1
(1)
+
24 V
BL
BN
BL
BN
+-
I1 I2 I3 I4 I5 I6 IB IC
L/+
(4)
U
or
12…240 V
50 / 60 Hz
N/-
or
U
L/+
(3)
I5 I6 I7 I8
I9 IA IB IC
-
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2 1 Q5 2 1 Q6 2 1 Q7 2 1 Q8 2
(2)
12…240 V
50 / 60 Hz
12…125 V
I1 I2 I3 I4
24 V
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2
(2)
(3)
+-
I1 I2 I3 I4 I5 I6 IB IC
24 V
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2
or
Ca / Ta
2
–
24 V
12…240 V
50 / 60 Hz
12…125 V
(1)
BK
BK
+ -
Ca / Ta
1
24 V
–
–
L/+
0 - 10 V ANALOGUE
Ca / Ta
2
(4)
U
or
12…240 V
50 / 60 Hz
N/-
or
(3)
(4)
U
U
12…240 V
50 / 60 Hz
N/-
12…125 V
12…125 V
(2)
12…240 V
50 / 60 Hz
12…125 V
or
U
12…125 V
(1) 1 A quick-blow fuse or circuit-breaker.
(2) 16 A fuse or circuit-breaker (B16).
(3) Resistive load.
(4) Inductive load.
Presentation:
pages 2 to 5
12
Characteristics:
pages 6 to 9
References:
pages 10 and 11
Schemes:
pages 12 and 13
Schneider Electric
Schemes (continued)
“Zelio Logic”
programmable relays
p1BD, B121JD, B122BD
SR1-p1p
SR1-p201BD
(1)
+
+
(1)
24 V
24 V
–
–
+ -
+ -
I1 I2 I3 I4 I5 I6 IB IC
(2)
L/+
12…240 V
50 / 60 Hz
12…125 V
(3)
(4)
or
12…240 V
50 / 60 Hz
or
(2)
12…240 V
50 / 60 Hz
12…125 V
U
N/-
(3)
(4)
U
12…240 V
50 / 60 Hz
N/-
or
U
U
12…125 V
12…125 V
SR1-p101FU
L
-
I9 IA IB IC
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2 1 Q5 2 1 Q6 2 1 Q7 2 1 Q8 2
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2
or
I5 I6 I7 I8
24 V
24 V
L/+
I1 I2 I3 I4
SR1-p201FU
(1)
L
(1)
100…240 V
50 / 60 Hz
100…240 V
50 / 60 Hz
N
N
+ -
L N
I1 I2 I3 I4 I5 I6
or
(2)
L/+
(3)
I9 IA IB IC
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2 1 Q5 2 1 Q6 2 1 Q7 2 1 Q8 2
1 Q1 2 1 Q2 2 1 Q3 2 1 Q4 2
12…240 V
50 / 60 Hz
12…125 V
I5 I6 I7 I8
100…240 V
100…240 V
L/+
I1 I2 I3 I4
(4)
U
or
12…240 V
50 / 60 Hz
N/-
or
(2)
12…240 V
50 / 60 Hz
12…125 V
(3)
(4)
U
12…240 V
50 / 60 Hz
N/-
or
U
U
12…125 V
12…125 V
(1) 1 A quick-blow fuse or circuit-breaker
(2) 16 A fuse or circuit-breaker (B16).
(3) Resistive load.
(4) Inductive load.
Presentation:
pages 2 to 5
Schneider Electric
Characteristics:
pages 6 to 9
References:
pages 10 and 11
Dimensions:
page 12
13
Download PDF