Funkwerk Fully Convergent Multifunctional Gateway TR200AW Datasheet

bintec TR200aw | TR200bw

Fully Convergent Multifunctional Gateway

The bintec TR200 is a multifunctional gateway designed for versatility and flexibility with a huge variety of professional features from routing, WLAN, telephony, VoIP and FoIP (T.38). Besides the conventional telephone interfaces a maximum of 10 SIP subsidiaries and 10 SIP providers are supported.It was specially developed for high-speed Internet access and can also be used for remote access in small to medium-sized enterprises or remote offices. Standardly equipped with a 4-port switch, the device also includes 5 IPSec tunnels ex works (default). With release 7.6.1 in addition 5 PPTP tunnels can be added after web activation for free.

For the connection to a trunk the basic version offers an analog and an ISDN exchange connection, which can be used alternatively. Two analog ports and an internal ISDN bus provide the direct connection of terminal devices. Furthermore SIP terminal devices (IP telephones, soft clients, etc.) can be registrated at bintec TR200. You are able to register at up to 10 SIP providers.

The control of the firewall and voice-data prioritization are assumed automatically by the bintec TR200 to simplify configuration. A 4-channel DSP for voice-data processing has been integrated into the router to guarantee high voice quality.

As a wireless router, the bintec TR200 supports the 802.11b/g standards with a gross throughput rate of 54

MBps. In addition to WEP encryption, the secure WPA or WPA2 mode for the use of preshared keys or inclusion of a Radius server is available to make sure that data transmission via the air interface remains secure. Access checks are already made at the port level via 802.1x. The multi-SSID function makes it possible to form several different user groups, each with their own privileges. With a push-button the WLAN modul can be switch off completely. A HTML user interface is available to employ the configuration of the routers.

The configuration of the devices takes place via console or alternatively via the Funkwerk Configuration

Interface (FCI). The FCI is a web-based graphical user interface, which is accessable from every PC with a current web-browser via HTTP or HTTPS connection. The encrypted SSL communication enables a secure configuration of the TR200.

Versions

Feature

TR200aw

TR200bw

Highlights

Feature

Integrated ADSL modem

2 ISDN ports

4 Port Ethernet Switch 10/100

Multi-SSID

IPSec

DynDNS

RADIUS, TACACS+

VLAN

Event Scheduler

Stateful Inspection Firewall

Content filtering

SSH login

Configuration Wizard

DSL Interface

Feature

ADSL

ADSL2 / ADSL2+

High-speed Internet

ATM

ATM

ATM - VBR3

Description

ANNEX-A

ANNEX-B

Description

ADSL2 / ADSL2+ with downloads up to 12 / 24 Mbps

Also for backup of ADSL connection, remote administration

Ability to separate Ethernet Port for configuring a DMZ network segment or Load Balancing scenarios

Virtual WLAN interfaces for individual access

With AES, certificates, IPComp, NAT Traversal, RADIUS

Router can still be reached over the Internet in spite of dyn. IP address

Secure authentication

Secure separation of network segments

Time-based execution of commands

Connection based firewall

30 days test license

Encrypted configuration session

Configuration assistant for HTTP for Intranet and WLAN

Wireless LAN

Feature

Standards

802.11i

Multi SSID

WEP 64/128

WPA / WPA2

Channels

Transmission Capacity

Receiver Sensitivity IEEE802.11b

Receiver Sensitivity IEEE802.11g

Description

IEEE802.11b resp. IEEE802.11g

802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP

Several service sets per radio in AP mode.

WEP 64 (40 Bit), WEP 128 (104 Bit)

WPA Enterprise Mode; WPA PSK Mode;

WPA2 Enterprise Mode; WPA2 PSK Mode

13 channels (Europe) / 11 channels (USA) max. 100 mW (20 dBm) e.i.r.p

11 Mbps:-82 dBm; 5,5 Mbps: -87 dBm; 2 Mbps: -91 dBm; 1 Mbps: -94 dBm

54 Mbps:-65 dBm; 48 Mbps:-66 dBm; 36 Mbps:-70 dBm; 24 Mbps:-74 dBm; 18 Mbps:-77 dBm; 12 Mbps:-79 dBm; 9 Mbps:-81 dBm; 11 Mbps:-80 dBm; 5,5 Mbps: -83 dBm; 2 Mbps: -84 dBm; 1 Mbps: -87 dBm

Description

G.dmt over ISDN (ITU G.992.1 Annex B, ISDN - U-R2), G.Lite (ITU G.922.2) with downloads up to 12 / 24 Mbps

PPPoA (RFC 2364) and PPPoE (RFC 2516)

AAL5 as Layer 1 protocol, PVCs, RFC 1483 encapsulation (LLC- or VC-multiplexed), support for at least two simultaneous services, 5 or more simultaneous VC connections

Support of several VPI/VCI, line monitoring facilities through OAM F4/F5 protocol elements available

ISDN Interface

Feature

ISDN protocols

B-channel protocols

PPP, ML-PPP

CAPI

Bit rate adaptation

Automatic backup

Description

Euro-ISDN

Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)

(See Software)

CAPI 2.0

V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM subscribers

Backup of the connection in case of failure of the ADSL line, including re-establisment of the

VPN tunnels

Security

Feature

NAT/PAT

Access lists

Stateful Inspection Firewall

RADIUS

TACACS+

Content filtering

VLAN

VPN - IPSec

VPN - IPSec

VPN-IPSec DPD

VPN - PPTP

DynDNS / DynVPN

IKE for IPSec

X.509

QoS for IPSec

PKI Support for IPSec

NAT Traversal for IPSec

IPCOMP

IPSec / RADIUS

IPSec Redesign

L2TP

GRE

Maintenance and Service

Feature

SNMP

SSH login

Trace / debugging / monitoring

DHCP

Setup Tool

HTML Setup Tool

XADMIN

Documentation

Guarantee

Description

Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network from public access

Filtering of IP packets according to different criteria (source, destination, port and interface) filtering with monitoring and interpretation of the status of the individual connections

Central check of access authorization at a RADIUS server (PPP and Login Authentication)

Support of TACACS a security application that provides centralized validation of users

30 day evaluation licence

Network nodes in different network segments behave like a arbitrary group connected to the same network segment

Inclusive, with a max. of 5 (from rel. 7.6.1 onwards) simultaneous tunnels

Powerful encryption up to 256 bits (AES, 3DES, DES, CAST, Blowfish, Twofish)

Dead Peer Detection for IPSec tunnel

From rel. 7.6.1 onwards: Strong encryption, up to 128 bits (MPPE), up to 168 bits (DES/3DES,

Blowfish), free of charge activation via funkwerk web page

Router can still be reached over the Internet in spite of dyn. IP address

Pre-Shared Keys and X.509 certificate support

X.509 v1/v3 certificates (PKCS#7/8/10, 12, CLRs, SCEP)

Available

Available

Available

IP Compression

Available

Policy manager and interface concept layer 2 tunneling protocol for ATM, Ethernet, PPP; user authentication

V.0 according RFC 2784 for common encapsulation

Description

Complete management with MIB-II, Enterprise MIB, inclusive SNMP management software for

Windows (DIME Tools and Browser)

Secure connections for terminal applications

Ethernet traces

Server and client for simplified configuration for TCP/IP

Integrated, menu-based, intuitive setup program, standard for the whole bintec product portfolio

HTML interface accessible through a Java Script enabled browser

Roll out tool for larger router installations (IP+ISDN)

Complete toolset and documentation on CD

2-year manufacturer's guarantee

Software Features

Feature

TCP/IP routing

Extended IP routing

IP load balancing

PPP

PPPoE

Dyn. IP addresses

DynDNS

Funkwerk Access Point Discovery

IP accounting

Connection time out

Description

Routing information updating and distribution, static or dynamic (RIP v1/v2/triggered, RFC

2091), selectable for each interface, ProxyARP, BOOTP/DHCP forwarding

Dependent on source/destination port, source IP address, TOS ..., i.e. policy-based routing

Bandwidth management

Authentication mechanisms (PAP, CHAP, MS-CHAP, MS-CHAP v2), standard PPP, dynamic

IP address assignment (server and client mode)

Point-to-Point Protocol over Ethernet (Client and Server) for high-speed Internet access over

ADSL (RFC 2516)

Simple Internet access without fixed IP addresses

Router can still be reached over the Internet in spite of dyn. IP address detection of configuered and unconfigured Funkwerk Access Points in the LAN

Source, destination, port, interface, packets/bytes counter

Short hold enables automatic call clearing

Hardware Features

Feature

Processor / memory

ADSL

ADSL chipset

LAN

4-port switch

WLAN

ISDN

Analogue

Console

Power supply

Status LEDs

Housing

Fanless design

Dimensions

Weight

Description

TI Prozessor, 8 MB Flash, 32 MB RAM

RJ11 port for connections to splitter

Texas Instruments chipset for ADSL modulation

Autosensing 10/100 Mbps Ethernet twisted pair

4-port autosensing 10/100 Mbps Ethernet switch

Internal radio modul, 2,4 GHz Band, 1 external antenna (Antenna Diversity for 802.11b)

2 x BRI (1 x external, 1 x internal)

2 x FXS, 1 x FXO

Serial console port

External AC/DC converter 12 V DC, 1,25 A (approx. 2 W per internal ISDN-Bus)

Power, Status, 4 x 10/100 BT, WAN, DSL, VoIP, ...

Metal housing

Long lifetime

205 x 29 x 172 mm (W x H x D)

Approx. 1000 g

bintec TR200aw | TR200bw Telephony Features

o Inquiriy call, Broker's call, Three-party conference

o Calling Line Identifcation Restriction (CLIP, CLIR)

o Call forwarding (CFU, CFB, CFNR)

o Call waiting

o Busy on Busy

o Station guarding (Do not disturb feature)

o Automatic exchange line access

o Pick-up (Call pick-up)

o AOC transfer tinternal S0

o CLIP, CLIP off Hook with FXS

o Terminal device type for analog connections (6 variants)

o Call Deflection - Deflecting calls before accepting

o Call Through

o CCBS, CCNR - Autom. completion of call to busy subscriber - of call on no answer

o Direct dial-in (baby phone / emergency calls)

o Point-to-multipoint access (P-MP), Point-to-point connection (P-P)

o Remote configuration over ISDN

o Follow me call forwarding service

o Message Waiting Indication external/internal: (ISDN only)

o MSN-specific line access

o Name assignment textensions

o Hight priority emergency call numbers

o Partial Rerouting (with P-P access only)

o Room monitoring internal

o SMS in the fixed-line network

o Exchange line access authorization for internal parties (6 stages)

o Restricted and unrestricted numbers

o Status display for internal call forwardings

o Phone book, Speed dialing from the telephone directory

o Door terminal adapter for analog ports

o UUS1

o VoIP/SIP telephony with up to 4 SIP terminal devices in a LAN (from release 7.6.5 onwards support of up to 10 SIP terminal devices in LAN/WLAN)

o Recall per time

o 14 internal subscribers max.

o 3-digit telephone numbers

o 10 Emergency calls, 10 Direct dial-in number

o Day / night call mode

o Two calendars/switching times

o 300 telephone book entries

o Two internal music on hold tunes

o Fallback on busy or missing bandwidth

o Ten SIP-providers

o SIP-User Agent, -Client, -Registrar, -Proxy

o Discrete DSP-channels for media transfer

o DSP-codecs: G.711, G.723.1, G.726, G.729a/b

o Intelligent bandwidth management

o Support of ISDN system phones

Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 180 300 9191 0

Fax: +49 - 180 300 9193 0

E-Mail: [email protected] - www.funkwerk-ec.com bintec TR200aw | TR200bw

13.10.2009

Subject to technical alterations